Search NASA⌕ Search

SEARCH · Search NASA

Results for “network optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Learning efficient erasure protocols for an underdamped memory

Here we apply evolutionary reinforcement learning to a simulation model to identify efficient time-dependent erasure protocols for a physical realization of a 1-bit memory using an underdamped mechanical cantilever. We show that these protocols, when applied to the cantilever in the laboratory, are considerably more efficient than our best hand-designed protocols. The learned protocols allow reliable high-speed erasure by minimizing the heating of the memory during its operation. More generally, the combination of methods used here opens the door to the rational design of efficient protocols for various physics applications.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

A Data Exchange Interface for a Standards Based Data Integration Platform

The modern electrical grid is a complex and a data rich system, requiring several sub-systems to provide the capability and support needed to perform functions such as distributed energy resource management, outage management, and fault location and isolation, to name a few. There is a need to develop software solutions and platforms that provide an integrated infrastructure to allow interoperability between these subsystems, while leveraging the abundant data available from today’s grid. In this paper, we present the development and deployment of an application service to integrate GridAPPS-D which is an open source, standards-based software platform with SurvalentONE, a commonly used DNP3 based ADMS platform that allows operation, monitoring, analysis, restoration, and optimization of network operations. We present details of the integration architecture, including its implementation, and provide results from functional testing of the architecture on a 13 bus IEEE system. The results validate that the integration is successful and is able to provide a two-way exchange of communication and translation between different communication protocols.

Singh, Alka↗
DOE OSTI2024

Joint Expansion Planning of Power and Water Distribution Networks

This research considers the joint expansion planning of power and water distribution networks, which are interdependent at various levels. We consider the dependency arising through the power consumption of pumps and develop models for integrating new components into existing networks. Then, we formulate the joint expansion planning as a Mixed Integer Nonlinear Program (MINLP). Applying this MINLP to a small-scale test network, we illustrate the advantages offered by joint expansion planning, such as increased flexibility and reduced costs and redundancy, over independently expanding power and water distribution networks.

expansion planning↗
DOE OSTI2023

Conservation Voltage Reduction with Distributed Energy Resource Management System, Grid-Edge, and Legacy Devices

Distribution utilities use conservation voltage reduction (CVR) to obtain energy savings and lower peak demand by reducing bus voltages. Traditionally, the CVR is accomplished by controlling the legacy assets such as load tap changers, voltage regulators, and capacitor banks. The deployment of the advanced distribution management system (ADMS) and distributed energy resource management system (DERMS) enables the integration of distributed energy resources into the distribution networks and provide the grid services including CVR. This paper studies the coordinated operation of an ADMS and a DERMS in achieving CVR and voltage regulation. A commercial ADMS uses legacy devices and Edge-of-Network Grid Optimization (ENGO) devices to obtain energy savings through CVR. A prototype DERMS dispatches the photovoltaic smart inverters based on real-time optimal power low to ensure voltage regulation across the feeder. The results show that the coordinated operation of ADMS and DERMS is effective in achieving CVR and voltage regulation. Specifically, energy savings of up to 4.7% are observed in the real utility distribution system used in this study.

advanced distribution management system↗
DOE OSTI2023

Graph Sparsification by Approximate matrix Multiplication

Graphs arising in statistical problems, signal processing, large networks, combinatorial optimization, and data analysis are often dense, which causes both computational and storage bottlenecks. One way of sparsifying a weighted graph, while sharing the same vertices as the original graph but reducing the number of edges, is through spectral sparsification. We study this problem through the perspective of RandNLA. Specifically, we utilize randomized matrix multiplication to give a clean and simple analysis of how sampling according to edge weights gives a spectral approximation to graph Laplacians, without requiring spectral information. Through the CR–MM algorithm, we attain a simple and computationally efficient sparsifier whose resulting Laplacian estimate is unbiased and of minimum variance. Here, we define a new notion of additive spectral sparsifiers, which has not been considered in the literature.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Dynamics of particle network in composite battery cathodes

We report that improving composite battery electrodes requires a delicate control of active materials and electrode formulation. The electrochemically active particles fulfill their role as energy exchange reservoirs through interacting with the surrounding conductive network. We formulate a network evolution model to interpret the regulation and equilibration between electrochemical activity and mechanical damage of these particles. Through statistical analysis of thousands of particles using x-ray phase contrast holotomography in a LiNi 0.8 Mn 0.1 Co 0.1 O 2 -based cathode, we found that the local network heterogeneity results in asynchronous activities in the early cycles, and subsequently the particle assemblies move toward a synchronous behavior. Our study pinpoints the chemomechanical behavior of individual particles and enables better designs of the conductive network to optimize the utility of all the particles during operation.

25 ENERGY STORAGE↗
DOE OSTI2020

Advanced Tri-lab Software Environment (ATSE)

The Advanced Tri-lab Software Environment (ATSE) is an effort to build an open, modular, extensible, community-engaged, and vendor-adaptable software ecosystem that enables the prototyping of new technologies for improving the ASC computing environment. The initial target for ATSE is to accelerate the maturity of the Arm ecosystem for supporting ASC computing and the high-performance computing community more broadly. ATSE provides an integrated and optimized software stack that includes: 1) Application development environment and libraries including compilers, math libraries, tools, MPI, and OpenMP, 2) Low-level system software including optimized Linux, network stack, file systems, containers, and virtual machines, 3) Job scheduling and management including workload manager, application launcher, and user tools, and 4) System administration and management tools supporting booting, monitoring, and operating system image management. SAND2020-12377 M Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Younge, Andrew J.↗
DOE OSTI2022

Do Machine Learning Approaches Offer Skill Improvement for Short-Term Forecasting of Wind Gust Occurrence and Magnitude?

Abstract Wind gusts, and in particular intense gusts, are societally relevant but extremely challenging to forecast. This study systematically assesses the skill enhancement that can be achieved using artificial neural networks (ANNs) for forecasting of wind gust occurrence and magnitude. Geophysical predictors from the ERA5 reanalysis are used in conjunction with an autoregressive term in regression and ANN models with different predictors, and varying model complexity. Models are derived and assessed for the warm (April–September) and cold (October–March) seasons for three high passenger volume airports in the United States. Model uncertainty is assessed by deriving models for 1000 different randomly selected training (70%) and testing (30%) subsets. Gust prediction fidelity in independent test samples is critically dependent on inclusion of an autoregressive term. Gust occurrence probabilities derived using five-layer ANNs exhibit consistently higher fidelity than those from regression models and shallower ANNs. Inclusion of the autoregressive term and increasing the number of hidden layers in ANNs from 1 to 5 also improve the model performance for gust magnitudes (lower RMSE, increased correlation, and model standard deviations that more closely approximate observed values). Deeper ANNs (e.g., 20 hidden layers) exhibit higher skill in forecasting strong (17–25.7 m s −1 ) and damaging (≥25.7 m s −1 ) wind gusts. However, such deep networks exhibit evidence of overfitting and still substantially underestimate (by 50%) the frequency of strong and damaging wind gusts at the three airports considered herein. Significance Statement Improved short-term forecasting of wind gusts will enhance aviation safety and logistics and may offer other societal benefits. Here we present a rigorous investigation of the relative skill of models of wind gust occurrence and magnitude that employ different statistical methods. It is shown that artificial neural networks (ANNs) offer considerable skill enhancement over regression methods, particularly for strong and damaging wind gusts. For wind gust magnitudes in particular, application of deeper learning networks (e.g., five or more hidden layers) offers tangible improvements in forecast accuracy. However, deeper networks are vulnerable to overfitting and exhibit substantial variability with the specific training and testing data subset used. Also, even deep ANNs reproduce only half of strong and damaging wind gusts. These results indicate the need for future work to elucidate the dynamical mechanisms of intense wind gusts and advance solutions to their prediction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Optimization of the deep neural network parameters for generating homogenized fuel assembly data for nodal codes

Homogenized fuel assembly (FA) data is a typical input data for nodal codes. Generating that data, however, could be time-consuming. One of promising ways to mitigate the computational burden of generating macroscopic cross-sections is to use trained artificial neural network (ANN) models for predicting nuclear data. However, there is a challenge to make the model support variable FA geometry. In this work, two most common types of FA were combined in one ANN model. Since there could be multiple ways of converting 2-dimensional FA data into 1-dimensional input vector for ANN, three different approaches of data flattening were evaluated. The input parameters included each fuel pin enrichment, fuel temperature, moderator temperature and boron concentration. The output parameters were 2-group macroscopic cross-sections (XS) and pin power distribution (HFF). A fully connected deep neural network (DNN) model was trained and tested using pre-generated data obtained with lattice physics code STREAM. The results of this study showed no statistically significant difference in the accuracy of XS and HFF generation for all 3 tested input vector orders. This means that fully connected DNN for XS generation demonstrated input sequence invariance. Results of comparing predicted XS data with reference solutions were found sufficiently close considering the reduction of computation time offered by ANN. Mean relative difference (MRD) for all output XS parameters was found below 0.7%, while HFF MRD was found higher compared to XS values, in some cases slightly exceeding 1%, mostly near guide tube locations. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

SimCCS: CCS Infrastructure Decision Support [Slides]

SimCCS can help determine optimal, regional network of CO 2 sources, CO 2 sinks and CO 2 transport infrastructure that meet desired CCS goals. Deployment of large-scale CCS will require large-scale regional infrastructure. Strategic investments in developing regional CO 2 transportation infrastructure can facilitate timely CCS deployment (including at large-scale). Economies of scale can help to minimize costs. Development of effective & efficient CCS infrastructure requires taking into consideration characteristics of point sources (for capture), region (for transport) and sinks (for storage).

58 GEOSCIENCES↗
DOE OSTI2023

Packetized Energy Management: Coordinating Transmission and Distribution (Final Report)

The project Packetized Energy Management (PEM): Coordinating Transmission and Distribution was part of the ARPA-E NODES program from 2015 to 2023. The high-level goal of the project was to develop and demonstrate novel, scalable, and impactful technologies related to the coordination of networked distributed energy resources (DERs). By demonstrating responsive means by which fleets of DERs could be coordinated to enhance grid operation and reliability, the U.S. could accelerate renewable integration and electrification efforts and meet decarbonization goals.

25 ENERGY STORAGE↗
DOE OSTI2024

Developing Data-Driven Synthetic Infrastructure Models for Resilience Analysis

Research on infrastructure resilience has produced promising methods to simulate and optimize complex networks to improve performance. However, restrictions on sharing infrastructure models and the steep cost of developing and maintaining infrastructure models presents a roadblock to adoption. To overcome this limitation, this research focuses on methods to create data-driven infrastructure models that will help improve infrastructure resilience and security. The analysis couples incomplete utility data, geospatial data, machine learning, and synthetic network generation methods to rapidly develop and update infrastructure models. The methods are validated using realistic utility models and site-specific data, with a focus on Puerto Rico due to its unique infrastructure challenges and available data. This research highlights promising opportunities for the use of synthetic network generation and machine learning to create infrastructure models when very little data is available. Results demonstrate that hybrid methods, which combine sparse utility data with synthetic models, can enhance model accuracy, and machine learning can predict model attributes using training data from other models. However, the complexity of infrastructure systems means that even minor changes in network connectivity can significantly impact simulation results. Resilience analysis using synthetic infrastructure models shows that while some system behaviors are preserved, the magnitude of disruptions may not be accurately represented, indicating the need for more research and validation before using synthetic models for critical infrastructure investment decisions. The framework outlined in this report represents a significant advance to infrastructure model development and could be applied to additional domains and sites. Future research will continue to streamline and validate methods to help reduce roadblocks to resilience analysis.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

CO 2 Transport Infrastructure Outlook in the United States

Carbon capture and storage (CCS) represents one of the most important methods to mitigate anthropogenic carbon emissions at a large scale, playing a key role in meeting climate change targets (Bui et al., 2018) and for net-zero CO 2 by 2050 scenarios in the United States (Browning et al., 2023). This technology involves capturing CO 2 emissions from industrial processes, transporting them via pipelines, trucks, rails, or ships, and ultimately storing them in underground geological sites, such as saline aquifers or depleted oil reservoirs. Thus, to encourage carbon reduction initiatives, the U.S. Congress enacted the Bipartisan Budget Act in 2018, reforming the 45Q tax credit to benefit operators storing CO 2 in geologic formations (Jones and Sherlock, 2021). Additionally, the 2022 Inflation Reduction Act further expanded these incentives, providing additional support for CCS initiatives (Hackett and Kuehn, 2023). Although numerous studies describe the importance of optimal CO 2 transportation to support the decision-making of CCS projects aligned with the objective of net-zero emissions by 2050 (Abramson and Christensen, 2021; Chen and Pawar, 2023; Greig and Pascale, 2021), further efforts are required to optimize the transport infrastructure for national-scale CCS deployment. Therefore, in this study, we examine three nationwide scenarios with the SimCCS 3.0 tool (Ma et al., 2022, 2023, 2024) along with a novel geospatial splitting approach developed by Velasco-Lozano et al. (Velasco- Lozano et al., 2024a, 2024b). We present optimized pipeline networks that meet the dynamic evolution of annual capture amounts, describing the required total pipeline lengths at each stage as a function of the pipeline diameters. Thus, the cases presented demonstrate the feasibility of CO 2 pipeline infrastructure for large-scale CCS projects.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Current-Regulated Arc Modulator Optimization

n this study, the performance of a current-regulated arc modulator was investigated with a focus on its role in initiating and sustaining plasma discharge within the Magnetron Body of the LINAC system. The analysis centered on how switching components, circuit topology, and feedback loop architecture influence critical factors such as energy efficiency, discharge stability, and long-term plasma containment. Particular attention was given to variations in pulse termination behavior, as observed through oscilloscope traces, which revealed inconsistencies affecting the duty factor and cathode temperature. These fluctuations have downstream effects on the cesium-coated cathode surface, thereby impacting H⁻ ion production and beam reliability. Simulation-based testing in LTspice was used to evaluate noise suppression techniques and arc current regulation schemes, revealing how optimized snubber networks, improved pulse shaping, and feedback stability can mitigate modulator-induced noise. The results ide

Campos, Nathan↗
DOE OSTI2020

Distributed Minimization of the Power Generation Cost in Prosumer-Based Distribution Networks: Preprint

Traditionally, electrical power was generated in big power plants. The cost of producing energy was related to the cost of fuel, e.g., carbon or gas, and by the cost of maintaining the power plants. With the advent of distributed energy resources, power can be produced directly at the edge of the electrical network by a new type of agents: the prosumers. Prosumers are entities that both consume and generate power, e.g., by means of photovoltaic panels. The cost of the power produced by prosumers is no longer related to fuel consumption since energy coming from distributed generators is essentially free. Rather, the cost is related to the remuneration that is due to the prosumers for the services they provide. The proposed control strategy minimizes the active power generation cost in the aforementioned scenario. The control scheme requires that the prosumers measure their voltage and then adjust the amount of injected power, according to a continuous time feedback control law that is indeed a projected gradient descent strategy. Simulations are provided in order to illustrate the algorithm behavior.

distributed control↗