Search NASA⌕ Search

SEARCH · Search NASA

Results for “ordered statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Modeling Crack Propagation in Polycrystalline Microstructure Using Variational Multiscale Method

Crack propagation in a polycrystalline microstructure is analyzed using a novel multiscale model. The model includes an explicit microstructural representation at critical regions (stress concentrators such as notches and cracks) and a reduced order model that statistically captures the microstructure at regions far away from stress concentrations. Crack propagation is modeled in these critical regions using the variational multiscale method. In this approach, a discontinuous displacement field is added to elements that exceed the critical values of normal or tangential tractions during loading. Compared to traditional cohesive zone modeling approaches, the method does not require the use of any special interface elements in the microstructure and thus can model arbitrary crack paths. The capability of the method in predicting both intergranular and transgranular failure modes in an elastoplastic polycrystal is demonstrated under tensile and three-point bending loads.

36 MATERIALS SCIENCE↗

Threshold Photoelectron Photoion Coincidence (TPEPICO) Studies. The Road to ± 0.1 kJ/mol Thermochemistry

The threshold photoelectron photoion coincidence (TPEPICO) technique is utilized to investigate the dissociation dynamics and thermochemistry of energy selected medium to large organic molecular ions. The reactions include parallel and consecutive steps that are modeled with the statistical theory in order to extract dissociation onsets for multiple dissociation paths. These studies are carried out with the aid of molecular orbital calculations of both ions and the transition states connecting the ion structure to their products. The results of these investigations yield accurate heats of formation of ions, free radicals, and stable molecules. In addition, they provide information about the potential energy surface that governs the dissociation process. Isomerization reactions prior to dissociation are readily inferred from the TPEPICO data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Latest results from GlueX

The GlueX experiment aims to study the gluonic degrees of freedom in QCD by mapping the light meson spectrum with an emphasis on searching for and studying light hybrid mesons. Hybrid mesons, and in particular exotic hybrid mesons, provide the ideal laboratory for testing QCD in the confinement regime since these mesons explicitly manifest the gluonic degrees of freedom. GlueX uses a solenoid-based detector and the new 12-GeV electron beam at Jefferson Lab to produce a 9-GeV beam of linearly polarized photons to study the photoproduction of light mesons. We will present results from our commissioning run, which already represents an order-of-magnitude statistical increase over the very limited existing world data.

Smith, Elton↗

A Hybrid Multi-Scale Model of Crystal Plasticity for Handling Stress Concentrations

Microstructural effects become important at regions of stress concentrators such as notches, cracks and contact surfaces. A multiscale model is presented that efficiently captures microstructural details at such critical regions. The approach is based on a multiresolution mesh that includes an explicit microstructure representation at critical regions where stresses are localized. At regions farther away from the stress concentration, a reduced order model that statistically captures the effect of the microstructure is employed. The statistical model is based on a finite element representation of the orientation distribution function (ODF). As an illustrative example, we have applied the multiscaling method to compute the stress intensity factor K I around the crack tip in a wedge-opening load specimen. The approach is verified with an analytical solution within linear elasticity approximation and is then extended to allow modeling of microstructural effects on crack tip plasticity.

36 MATERIALS SCIENCE↗

CV4Quantum: Reducing the Sampling Overhead in Probabilistic Error Cancellation Using Control Variates

Quasiprobabilistic decompositions (QPDs) play a key role in maximizing the utility of near-term quantum hardware. For example, Probabilistic Error Cancellation (PEC) (an error mitigation technique) and circuit cutting (which enables large quantum computations to be performed on quantum hardware with a limited number of qubits) both involve QPDs. Computations based on QPDs typically incur large sampling overheads that grow exponentially with the number of error-terms mitigated or number of circuit-cuts employed, limiting their practical feasibility. In this work, we adapt the control variates variance reduction technique from the statistics literature in order to reduce the sampling overhead in QPD-based computations. We demonstrate our method using simulation experiments that mimic a realistic PEC scenario. In our experiments, we observed a more than 50% reduction in the number of samples needed to achieve a given precision, in more than 50% of the PEC-based estimations performed in the study when using our approach. We discuss how future research on constructing good control variates can lead to even stronger sampling overhead reduction.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Refractive index of He in the region 920-1910 A

The refractive index of He has been determined in the region 920-1910 A by measurements of wavelength shifts in a 3-m spectrograph alternately filled with He and evacuated. Differential pumping systems were used to allow operation of the light source at conveniently low pressures. Several plates were measured and analyzed in order to reduce statistical errors. The results at 919 A agree with the theory within 1%, i.e., less than the experimental error.

Huber, M. C. E.↗

Comparison of remotely sensed continental-shelf wave spectra with spectra computed by using a wave refraction computer model

An initial attempt was made to verify the Langley Research Center and Virginia Institute of Marine Science mid-Atlantic continental-shelf wave refraction model. The model was used to simulate refraction occurring during a continental-shelf remote sensing experiment conducted on August 17, 1973. Simulated wave spectra compared favorably, in a qualitative sense, with the experimental spectra. However, it was observed that most of the wave energy resided at frequencies higher than those for which refraction and shoaling effects were predicted, In addition, variations among the experimental spectra were so small that they were not considered statistically significant. In order to verify the refraction model, simulation must be performed in conjunction with a set of significantly varying spectra in which a considerable portion of the total energy resides at frequencies for which refraction and shoaling effects are likely.

Poole, L. R.↗

Ocean waves

Ocean wave data can be obtained from such active microwave probe techniques as monostatic HF and VHF, bistatic HF, HF synthetic aperture radar, altimeters, satellite and airborne synthetic aperture radar, carrier wave or pulsed dual-frequency radars, and coastal surveillance radar. Approaches to texture analysis of ocean wave imagery are discussed, with attention given to transform techniques or spatial frequency analysis, and the analysis of second-order gray level statistics. In addition, recommendations are made for further work on the modulation of short gravity waves by longer waves as a function of wind speed and wave direction, and the derivation of transfer functions for the ocean response of dual-frequency radars.

Bartsch, N.↗

NASA/FAA flight-test investigation of helicopter microwave landing system approaches

The helicopter Microwave Landing System flight-test investigations, conducted by a joint NASA/FAA effort in order to gather statistical data for establishing terminal instrument procedures criteria, and to provide a performance data base for developing advanced MLS guidance concepts, are presented. The specific flight-test objectives were to: (1) develop acceptable angle-only MLS approach profiles; (2) determine tracking errors; (3) determine altitude loss during missed approach; (4) evaluate guidance display sensitivities; and (5) evaluate pilot acceptability. Fourteen pilots flew 140 manual (without stability augmentation) dual-pilot simulated instrument approaches in a UH-1H helicopter. The flight profiles flown included 3-, 6-, and 9-degree glideslope, centerline approaches to decision heights of 50, 100, and 150 ft, respectively. The angular guidance display sensitivities and the data acquisition system are also described. Eight major conclusions are made, and include the following: (1) the use of pitch attitude to control airspeed and collective to control glideslope was the preferred pilot technique for the steep glideslope approaches, and (2) angular guidance deviation indicator sensitivity requirements for helicopter MLS approaches to STOLports and heliports have been found to be significantly different from standard ILS sensitivities.

Peach, I. L., Jr.↗

Development and evaluation of automatic landing control laws for light wing loading STOL aircraft

Automatic flare and decrab control laws were developed for NASA's experimental Twin Otter. This light wing loading STOL aircraft was equipped with direct lift control (DLC) wing spoilers to enhance flight path control. Automatic landing control laws that made use of the spoilers were developed, evaluated in a simulation and the results compared with these obtained for configurations that did not use DLC. The spoilers produced a significant improvement in performance. A simulation that could be operated faster than real time in order to provide statistical landing data for a large number of landings over a wide spectrum of disturbances in a short time was constructed and used in the evaluation and refinement of control law configurations. A longitudinal control law that had been previously developed and evaluated in flight was also simulated and its performance compared with that of the control laws developed. Runway alignment control laws were also defined, evaluated, and refined to result in a final recommended configuration. Good landing performance, compatible with Category 3 operation into STOL runways, was obtained.

Feinreich, B.↗

Soil moisture from temperature measurements at the Earth's surface, update

Soil moisture budgets at the Earth's surface were investigated based on soil and atmospheric temperature variations. A number of data sets were plotted and statistically analyzed in order to accentuate the existence and the characteristics of mesoscale soil temperature extrema variations and their relations to other parameters. The correlations between diurnal temperature extrema for air and soil in drought and non-drought periods appear to follow different characteristic patterns, allowing an inference of soil moisture content from temperature data. The recovery of temperature extrema after a precipitation event also follows a characteristic power curve rise between two limiting values which is an indicator of evaporation rates. If these indicators are applied universally to regional temperature data, soil moisture content or drought conditions can be inferred directly from temperature measurements.

Welker, J. E.↗

At least some errors are randomly generated (Freud was wrong)

An experiment was carried out to expose something about human error generating mechanisms. In the context of the experiment, an error was made when a subject pressed the wrong key on a computer keyboard or pressed no key at all in the time allotted. These might be considered, respectively, errors of substitution and errors of omission. Each of seven subjects saw a sequence of three digital numbers, made an easily learned binary judgement about each, and was to press the appropriate one of two keys. Each session consisted of 1,000 presentations of randomly permuted, fixed numbers broken into 10 blocks of 100. One of two keys should have been pressed within one second of the onset of each stimulus. These data were subjected to statistical analyses in order to probe the nature of the error generating mechanisms. Goodness of fit tests for a Poisson distribution for the number of errors per 50 trial interval and for an exponential distribution of the length of the intervals between errors were carried out. There is evidence for an endogenous mechanism that may best be described as a random error generator. Furthermore, an item analysis of the number of errors produced per stimulus suggests the existence of a second mechanism operating on task driven factors producing exogenous errors. Some errors, at least, are the result of constant probability generating mechanisms with error rate idiosyncratically determined for each subject.

Sellen, A. J.↗

Survey of 0.1- to 16-keV/e plasma sheet ion composition

An analysis is performed of all plasma sheet data collected in 1978-79 in order to discern statistical trends in the data. Attention is focused on the bulk parameters of 0.1-16 keV/e plasma sheet ions detected by the Plasma Composition Experiment on the ISEE 1 satellite. The data were collected at 10-23 earth radii, and are averaged for various levels of activity in the AE index. Solar H(+) and He(2+) ions dominate during quiet periods and possess energies similar to those of the solar wind when the quiet period lasts several hours. Increasing AE index values eventually lead to a replacement of the solar ions with terrestrial ions, particularly O(+), which can have an average energy density of 3-4 keV/e at every activity level. The solar ions, however, increase in energy as their density decreases. The O(+) density is highest near the local midnight and becomes the most numerous during highly disturbed conditions. Finally, the O(+) density was observed to increase by a factor of three over the monitoring period, possibly due to enhanced solar EUV radiation.

Lennartsson, W.↗

Light propagation and the distance-redshift relation in a realistic inhomogeneous universe

The propagation of light rays in a clumpy universe constructed by cosmological version of the post-Newtonian approximation was investigated. It is shown that linear approximation to the propagation equations is valid in the region where zeta is approximately less than 1 even if the density contrast is much larger than unity. Based on a gerneral order-of-magnitude statistical consideration, it is argued that the linear approximation is still valid where zeta is approximately greater than 1. A general formula for the distance-redshift relation in a clumpy universe is given. An explicit expression is derived for a simplified situation in which the effect of the gravitational potential of inhomogeneities dominates. In the light of the derived relation, the validity of the Dyer-Roeder distance is discussed. Also, statistical properties of light rays are investigated for a simple model of an inhomogeneous universe. The result of this example supports the validity of the linear approximation.

Futamase, Toshifumi↗

Status of the Whipple Observatory Cerenkov air shower imaging telescope array

Recently the power of the Cerenkov imaging technique in Very High Energy gamma-ray astronomy was demonstrated by the detection of the Crab nebula at high statistical significance. In order to further develop this technique to allow the detection of weaker or more distant sources a second 10 m class reflector was constructed about 120 m from the original instrument. The addition of the second reflector will allow both a reduction in the energy threshold and an improvement in the rejection of the hadronic background. The design and construction of the second reflector, Gamma Ray Astrophysics New Imaging TElescope (GRANITE) is described.

Akerlof, C. W.↗

Feature detection in satellite images using neural network technology

A feasibility study of automated classification of satellite images is described. Satellite images were characterized by the textures they contain. In particular, the detection of cloud textures was investigated. The method of second-order gray level statistics, using co-occurrence matrices, was applied to extract feature vectors from image segments. Neural network technology was employed to classify these feature vectors. The cascade-correlation architecture was successfully used as a classifier. The use of a Kohonen network was also investigated but this architecture could not reliably classify the feature vectors due to the complicated structure of the classification problem. The best results were obtained when data from different spectral bands were fused.

Augusteijn, Marijke F.↗

The structure of the polar vortex

The paper develops a comparative picture of the 1987 Southern Hemisphere and 1989 Northern Hemisphere lower stratospheric, polar vortex circulation and constituent distributions as observed by the Airborne Antarctic Ozone Experiment, August 17-September 22, 1987, and Airborne Arctic Stratospheric Expedition, January 3-February 19, 1989 aircraft campaigns. Overall, both polar vortices define a region of highly isolated air, where the exchange of trace gases occurs principally at the vortex edge through erosional wave activity. Aircraft measurement showed that between 50 and 100 mbar, horizontally stratified long-lived tracers such as N2O are displaced downward 2-3 km on the cyclonic (poleward) side of the jet with the meridional tracer gradient sharpest at the jet core. Eddy mixing rates, computed using parcel ensemble statistics, are an order of magnitude or more lower on the cyclonic side of the jet compared to those on the anticyclonic side. Poleward zonal mean meridional flow on the anticyclonic side of the jet terminates in a descent zone at the jet core.

Schoeberl, Mark R.↗

Advanced timeline systems

The Mission Planning Division of the Mission Operations Laboratory at NASA's Marshall Space Flight Center is responsible for scheduling experiment activities for space missions controlled at MSFC. In order to draw statistically relevant conclusions, all experiments must be scheduled at least once and may have repeated performances during the mission. An experiment consists of a series of steps which, when performed, provide results pertinent to the experiment's functional objective. Since these experiments require a set of resources such as crew and power, the task of creating a timeline of experiment activities for the mission is one of resource constrained scheduling. For each experiment, a computer model with detailed information of the steps involved in running the experiment, including crew requirements, processing times, and resource requirements is created. These models are then loaded into the Experiment Scheduling Program (ESP) which attempts to create a schedule which satisfies all resource constraints. ESP uses a depth-first search technique to place each experiment into a time interval, and a scoring function to evaluate the schedule. The mission planners generate several schedules and choose one with a high value of the scoring function to send through the approval process. The process of approving a mission timeline can take several months. Each timeline must meet the requirements of the scientists, the crew, and various engineering departments as well as enforce all resource restrictions. No single objective is considered in creating a timeline. The experiment scheduling problem is: given a set of experiments, place each experiment along the mission timeline so that all resource requirements and temporal constraints are met and the timeline is acceptable to all who must approve it. Much work has been done on multicriteria decision making (MCDM). When there are two criteria, schedules which perform well with respect to one criterion will often perform poorly with respect to the other. One schedule dominates another if it performs strictly better on one criterion, and no worse on the other. Clearly, dominated schedules are undesireable. A nondominated schedule can be generated by some sort of optimization problem. Generally there are two approaches: the first is a hierarchical approach while the second requires optimizing a weighting or scoring function.

Bulfin, R. L.↗