Search NASA⌕ Search

SEARCH · Search NASA

Results for “particle distributions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Investigating New Particle Formation and Growth Over an Urban Location in the Eastern Mediterranean

Abstract This study investigates the new particle formation (NPF) events at an urban location in the Eastern Mediterranean. Particle size distribution, particulate chemical composition, and gaseous pollutants were monitored in Rehovot, Israel (31°53″N 34°48″E) during two campaigns: from April 29 to 3 May 2021 (Campaign 1) and from May 3 to 11 May 2023 (Campaign 2), coinciding with an intensive bonfire burning festival. The organic aerosols (OA) source apportionment identified two major factors—Hydrocarbon‐like OA and Biomass‐burning OA—as well as two secondary factors—MO‐OOA (more oxidized‐oxygenated OA) and LO‐OOA (low oxidized oxygenated OA). NPF events were frequently observed during the day (mostly well‐defined nucleation events) and at night (burst of ultrafine mode particles without any discernible growth). A condensation sink value of (9.4 ± 4.0) × 10 −3 s −1 during Campaign 1 and (14.2 ± 6.0) × 10 −3 s −1 during Campaign 2 was obtained. The daytime events were associated with enhanced sulfuric acid proxy concentrations of (2–12) × 10 6 molecules cm −3 , suggesting the role of gas‐phase photochemistry in promoting NPF. A novel approach of hybrid positive matrix factorization analysis was used to deconvolve the chemical species responsible for the observed events. The results suggest the involvement of multiple components, including ammonium sulfate and MO‐OOA, in the nucleation; Nitrate, HOA and LO‐OOA participate in the subsequent particle growth for the daytime events. Nighttime events involve only semi‐volatile species (LO‐OOA, HOA and nitrate) along with ammonium sulfate.

Meteorology & Atmospheric Sciences↗
DOE OSTI2023

Texas A&M University Mobile Facility Measurements during TRACER (Field Campaign Report)

One of the main goals of the U.S Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Tracking Aerosol Convection Interactions Experiment (TRACER) near Houston, Texas is to improve understanding of how meteorology and aerosols impact storm dynamical and microphysical processes in deep convection to better constrain and improve their model representation. The Houston area is strongly influenced by sea- and bay-breeze circulations that generate convergence and help to initiate and organize deep convection. To properly isolate and understand the roles of varied meteorological conditions and cloud condensation nuclei (CCN) and ice nucleation particles (INP) distributions in different air masses, co-located thermodynamic, kinematic, and aerosol vertical profile observations are needed. The focus of this campaign was to provide key measurements in air masses both in front of and behind sea/bay breeze fronts moving through the greater Houston area to sample the airmass heterogeneity. The overarching scientific goal of this campaign is to understand how the vertical distributions of both CCN and INP correspond to the inflow layer of deep convection in maritime, background continental, and polluted continental air masses, and how these variations influence deep convection. To fully sample the heterogeneity in both meteorological conditions and aerosols across the sea-breeze front (SBF), Texas A&M University (TAMU) deployed a InterMet 3050A 403 MHz mobile unit launching iMet-4 radiosondes and the new Rapid Onsite Atmospheric Measurement Van (ROAM-V) for aerosol sampling during the TRACER intensive operational period (IOP) from June to September 2022. The suite of instruments deployed on ROAM-V included a condensation particle counter (CPC; GRIMM Model 5.403 CPC), scanning mobility particle sizer (SMPS; TSI 3750 detector, TSI 3082 classifier, TSI 3088 neutralizer, TSI 3081A differential mobility analyzer), cloud condensation nuclei counter (Droplet Measurement Technologies CCN counter), micropulse lidar (Droplet Measurement Technologies micropulse lidar [miniMPL]), and a Davis Rotating Uniform size-cut Monitor (DRUM; DRUMAir 4-DRUM). Before sampling at each location, the latitude and longitude were recorded using the Global Positioning System (GPS) on the phone application “My Altitude”. The DRUM data were collected as part of a closely related ARM field campaign and also supported by DOE Atmospheric System Research grant DE-SC0021047. The TAMU team sampled these airmass heterogeneities by strategically choosing deployment sites in a different airmass than the ARM fixed sites in La Porte and Guy, Texas. On days when the sea/bay breeze boundary was pushing inland, the TAMU team would usually sample the airmass on the maritime side of the SBF at a coastal site in Galveston, Texas in the early afternoon (1730-1900 UTC) and then move inland ahead of the SBF to sample the airmass on the continental side during late afternoon (2030-2230). Figure 1 shows the Galveston maritime site and the array of sites for the late afternoon continental measurements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Measurements and Prediction of Ash Deposition in a Cyclone-Fired Boiler Operating under Variable Load Conditions

Measurements of ash deposition rates were made between the secondary superheater and reheater sections of a 450 MW cyclone-fired lignite boiler as the operational load varied from 33 to 100%. Significant reductions in deposition rates with a decrease in operational load were observed. To uncover the causative mechanisms behind these observations, operational data from the power plant were used to carry out computational fluid dynamic (CFD) simulations of the boiler. After ascertaining that the gas temperatures and velocities at various sections within the boiler were being represented adequately, decoupled simulations of the ash deposition process on the deposit probe were carried out using a finely resolved boundary layer mesh. Fly ash particle size distribution (PSD) and its concentration for the decoupled calculations were determined from stand-alone cyclone barrel simulations. The ash partitioning (mass %) between the fly ash and slag was found to be ~50:50, which was in line with previous field observations, and it did not vary significantly across different cyclone loads. The predicted PSD of the deposit ash was concentrated in the size range 10–30 microns, which was in agreement with cross-sectional images of the deposit obtained from the measurements. At lower loads, sharp variations in the deposition rates were predicted in the gas temperature range 950–1150 K. The particle kinetic energy—particle viscosity-based capture methodology utilized in this study in conjunction with appropriate ash compositions, ash viscosity models and gas temperature estimates can help estimate slagging propensities at different loads reasonably well in these systems.

Krishnamoorthy, Gautham (ORCID:0000000255205092)↗
DOE OSTI2025

Using Boosted Decision Trees to Select High Quality Measurements in the Mu2e Experiment at Fermilab

This thesis presents the implementation and evaluation of a Boosted Decision Tree (BDT) model to improve the selection of high-quality track measurements in the Mu2e experiment at Fermilab. The Mu2e experiment is a high-energy physics experiments seeking to observe a rare theoretical physics process known as Charged Lepton Flavor Violation. A significant challenge faced by the Mu2e experiment are so-called background events, which are events whose data mimics that of the rare physics process the experiment seeks to observe. Without a mechanism to reduce background, it would be impossible to know whether Charged Lepton Flavor Violation occurred or not. To this end, high-quality track measurements must be distinguished from low-quality track measurements. A track can be conceived of as the reconstructed path of a particle that traveled through the Mu2e detector. In addition to other data, data about such tracks is stored using a C++-based framework, specific to the domain of high-energy physics, known as ROOT. A boosted decision tree model was trained using ROOT’s Toolkit For Multivariate Analysis by leveraging variables ancillary to track quality. In evaluation, the BDT achieves a ROC-AUC of 0.927 in discriminating good-quality tracks from poor-quality tracks. Such a score is indicative of both strong discrimination and strong generalization. Subsequently, it is shown that applying a BDT-based quality cut to the distribution of particle momenta significantly enhances the signal-to-background distinction for signal electrons, paving the way for improved sensitivity to Charged Lepton Flavor Violation.

Mullany, Brendan T. [Drew U.] (ORCID:0009000818888↗
DOE OSTI2021

Powder spreading, densification, and part deformation in binder jetting additive manufacturing

Binder jetting additive manufacturing (AM) can print complex structures in economical and scalable manner. Binder jetting AM comprises of deposition and weak binding of particles, known as green part, at room temperature and subsequent binder removal and sintering densification at high temperatures. However, during the densification (i.e., sintering), the part significantly deforms due to volume shrinkage. The deformation during sintering is difficult to predict, which prevents the widespread application of this technology. In this research, powder spreading simulation using discrete element method (DEM) was performed first to capture local variations in powder bed configuration. Second, finite element method (FEM) with a phenomenological continuum constitutive model was used to predict part shrinkage during the sintering process. DEM simulation showed variations in packing density, particle segregation, formation of uneven powder bed surface, and shift in particle size distribution (PSD). The sintering simulation modeled part deformation with a reasonable accuracy of 3% for solid-state sintering and intermediate liquid phase sintering. A demonstration case with non-uniform initial packing density showed that inhomogeneous green part density and PSD should be accounted for prediction of part deformation in binder jetting AM.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Triple-Moment Representation of Ice in the Predicted Particle Properties (P3) Microphysics Scheme

In the original Predicted Particle Properties (P3) bulk microphysics scheme, all ice-phase hydrometeors are represented by one or more “free” ice categories, where the physical properties evolve smoothly through changes to the four prognostic variables (per category), and with a two-moment representation of the particle size distribution. As such, the spectral dispersion cannot evolve independently, which thus results in limitations in representation of ice—in particular, hail—due to necessary constraints in the scheme to prevent excessive gravitational size sorting. To overcome this, P3 has been modified to include a three-moment representation of the size distribution of each ice category through the addition of a fifth prognostic variable, the sixth moment of the size distribution. The details of the three-moment ice parameterization in P3 are provided. The behavior of the modified scheme, with the single-ice-category configuration, is illustrated through simulations in a simple 1D kinematic model framework as well as with near large-eddy-resolving (250-m grid spacing) 3D simulations of a hail-producing supercell. It is shown that the three-moment ice configuration controls size sorting in a physically based way and leads to an improved capacity to simulate large, heavily rimed ice (hail), including mean and maximum sizes and reflectivity, and thus an overall improvement in the representation of ice-phase particles in the P3 scheme.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Beam halo formation with different cathode distributions

Beam halo refers to the low-density distribution of particles extending beyond the beam core, and its generation and mitigation are important topics in particle accelerator design. Effective mitigation of beam halo is essential for the cooler design based on Energy Recovery Linac (ERL), which must deliver an electron beam with average beam current of 100 mA and a charge 1 nC per bunch. In the ERL injector and booster linacs, space charge effects are stronger due to relatively low beam energy (6 MeV). Additionally, the longer bunch length of approximately 100 ps in this regime vs the RF period of 5.08 ns makes the formation of beam halos more likely. Therefore, effective collimation of beam halo is critical to maintaining the required beam parameters. To design an effective collimation scheme, several halo distributions were generated at the cathode and used to study halo formation within the injector-merger. This paper presents different halo distributions and halo formation, providing insights on halo collimation strategy.

Accelerator Physics↗
DOE OSTI2025

Effect of interparticle fields and radiation reaction on beam dynamics

The dynamics of relativistic particles in an intense electromagnetic field can be described by the Landau-Lifshitz (LL) equation, where the radiation reaction (RR) is accounted for via a self-force, and interparticle fields are often neglected as an approximation. However, the inclusion of interparticle fields is necessary to ensure energy-momentum conservation, particularly during coherent emission. Here we present (i) an analytical proof showing that the energy-momentum conservation law of the Hamilton-Rohrlich-Dirac action, which is divergence free and describes a generic system of interacting charges, respects causality and provides physically sensible results; (ii) a simple generalization of the LL equation for many particles evaluated as a function of the total field, i.e., the sum of the external and interparticle fields. By performing first-principles numerical simulations of a neutral, relativistic bunch of electrons and positrons (e − /e + ) colliding with a laser pulse, this theory is shown to satisfy energy-momentum conservation when interparticle fields and RR are simultaneously taken into account; and (iii) the combined effect of interparticle fields and RR primarily affects the tail of the particle energy distribution. Additionally, our first-principles simulations show that the effect of interparticle fields on beam energy loss becomes smaller when most of the radiated energy is incoherent.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Amphiphilic Block Copolymers for Flocculation and Hydrophobization of Legacy Waste Suspensions in Flotation Driven Dewatering Operations - 20162

Flotation has been effectively demonstrated as a low footprint, high efficiency separation process when utilising simple anionic surface modifying agents such as sodium dodecyl sulphate (SDS). These agents increase hydrophobicity to remove suspended cationic surface charged particulates such as Mg(OH){sub 2} from waste suspensions similar to those at British nuclear fuel management sites- where corrosion processes have degraded fuel cladding. The technology is advantageous as it could effectively be retrofitted into existing waste management facilities at nuclear waste management sites such Sellafield and Hanford as the simplicity (no moving parts) and size of this technology coupled with low cost of construction could be rapidly deployed to aid in risk and hazard reduction decommissioning operations with minimum impact to secondary waste generation. Previously, sodium dodecyl sulphate has been deployed as a collector agent to increase the hydrophobicity of Mg(OH){sub 2} suspended particles, achieving a maximum particulate extraction percentage of 93%. To achieve further particulate extraction, flotation performance has been determined to be a function of the hydrodynamic limitations extracting fine material (>20 μm). Fine particulates have been shown in the minerals industry to have an inability to overcome slipstreams created from rising bubbles in flotation cells, likely due to the low mass and thus momentum of the colloidal material, preventing interaction between the hydrophobized particles and air-water interfaces (bubbles). To combat this mass transfer resistance poly(acrylic acid)-block-poly(n-butyl acrylate) amphiphilic diblock copolymers were synthesised via reversible addition-fragmentation chain-transfer (RAFT) polymerisation. The anticipated mode of action of these polymers involves the hydrophilic poly(acrylic acid) block polymer acting as a flocculation agent to increase the mass of the aggregates, and the hydrophobic poly(n-butyl acrylate) modifies the hydrophobicity of the resulting flocs. The concentration of this polymer (termed a macro-collector) was varied and the change in particle size distribution of the particulate suspension was analysed using static light scattering. The flotation performance was then characterised by several methods including percentage particulate recovery, volume reduction factor and residual bulk particulate concentration. This was then benchmarked against the traditional surfactant collector agent SDS. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Study of Microphysical Signatures Based on Spectral Polarimetry during the RELAMPAGO Field Experiment in Argentina

Weather radars with dual-polarization capabilities enable the study of various characteristics of hydrometeors, including their size, shape, and orientation. Radar polarimetric measurements, coupled with Doppler information, allow for analysis in the spectral domain. This analysis can be leveraged to reveal valuable insight into the microphysics and kinematics of hydrometeors in precipitation systems. This paper uses spectral polarimetry to investigate precipitation microphysics and kinematics in storm environments observed during the Remote Sensing of Electrification, Lightning, and Mesoscale/Microscale Processes with Adaptive Ground Observations (RELAMPAGO) field experiment in Argentina. This study uses range–height indicator scan measurements from a C-band polarimetric Doppler weather radar deployed during the field campaign. Here, in this work, the impact of storm dynamics on hydrometeors is studied, including the size sorting of hydrometeors due to vertical wind shear. In addition, particle microphysical processes because of aggregation and growth of ice crystals in anvil clouds, as well as graupel formation resulting from the riming of ice crystals and dendrites, are also analyzed here. The presence of different particle size distributions because of the mixing of hydrometeors in a sheared environment and resulting size sorting has been reported using spectral differential reflectivity (sZ dr ) slope. Spectral reflectivity sZ h and sZ dr have also been used to understand the signature of ice crystal aggregation in an anvil cloud. The regions of pristine ice crystals are identified from vertical profiles of spectral polarimetric variables in anvil cloud because of sZ h < 0 dB and sZ dr values around 2 dB. It is also found that the growth process of these ice crystals causes a skewed bimodal sZ h spectrum due to the presence of both pristine ice crystals and dry snow. Next, graupel formation due to riming has been studied, and it is found that the riming process produces sZ h values of about 10 dB and corresponding sZ dr values of 1 dB. This positive sZ dr indicates the presence of needle/columnar secondary ice particles formed by ice multiplication processes in the riming zones. Last, the temporal evolution of a storm is investigated by analyzing changes in hydrometeor types with time and their influence on the spectral polarimetric variables.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Quantifications of growth rate and particle size of magnesium silicate hydrate cement using small‐angle X‐ray scattering

The focus of recent research on cement binders has shifted to alternatives such as magnesium silicate hydrate (M-S-H) to mitigate the environmental impact of conventional concrete production. However, a detailed understanding of the morphology and growth rate of M-S-H, which informs its applicability as a cementing agent, is lacking. These properties are important as they influence cement hydration and consequently the development of macroscopic properties. Here, in this study, the particle size distribution and growth rate of M-S-H synthesized by mixing aqueous stock solutions were analyzed using synchrotron-based small-angle X-ray scattering. The reaction solutions contained dissolved magnesium and silicon with concentrations ranging from 2 to 500 mM, corresponding to saturation indices with respect to M-S-H endmembers, M 0.75 -S-H and M 1.50 -S-H, between 5.8 and 10.3. The precipitation rates of M-S-H align with affinity-based kinetic models and can be described by the following equations: For M 0.75 -S-H: 𝑟 M 0.75 −S−H =10 −9.54±0.70 ⁢(Ω$^{0.59±0.08}_{M_{0.75}⁢\textrm{SH}}$−1), and for M 1.50 -S-H: 𝑟 M 1.50 −S−H =10 −7.56±0.37 ⁢(Ω$^{0.34±0.04}_{M_{1.50}⁢\textrm{SH}}$−1), where 𝑟 is the rate in mol/L/s, and Ω represents the saturation ratio with respect to M-S-H. Moreover, we observed that changing the [Mg]/[Si] ratio affects particle size, a trend that cannot be fully explained by changes in the saturation index alone. These insights are critical for improving the predictability and control of cementation in concrete that utilizes M-S-H-based binders.

M-S-H↗
DOE OSTI2021

Cometary Activity Begins at Kuiper Belt Distances: Evidence from C/2017 K2

We study the development of activity in the incoming long-period comet C/2017 K2 over the heliocentric distance range 9 ≲ r {sub H} ≲ 16 au. The comet continues to be characterized by a coma of submillimeter-sized and larger particles ejected at low velocity. In a fixed co-moving volume around the nucleus we find that the scattering cross section of the coma, C, is related to the heliocentric distance by a power law, C∝r{sub H}{sup -s}, with heliocentric index s = 1.14 ± 0.05. This dependence is significantly weaker than the r {sub H} {sup -2} variation of the insolation as a result of two effects. These are, first, the heliocentric dependence of the dust velocity and, second, a lag effect due to very slow-moving particles ejected long before the observations were taken. A Monte Carlo model of the photometry shows that dust production beginning at r {sub H} ~ 35 au is needed to match the measured heliocentric index, with only a slight dependence on the particle size distribution. Mass-loss rates in dust at 10 au are of order 10{sup 3} kg s{sup -1}, while loss rates in gas may be much smaller, depending on the unknown dust to gas ratio. Consequently, the ratio of the nongravitational acceleration to the local solar gravity, α', may, depending on the nucleus size, attain values of ~10{sup -7} ≲ α' ≲ 10{sup -5}, comparable to values found in short-period comets at much smaller distances. Nongravitational acceleration in C/2017 K2 and similarly distant comets, while presently unmeasured, may limit the accuracy with which we can infer the properties of the Oort cloud from the orbits of long-period comets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Smart Preprocessing & Robust Integration Emulator

To achieve the desired particle size of biomass feedstocks during preprocessing for trouble-free handling and conversion to produce biofuels and bioproducts, the raw materials must undergo a crucial milling process. The particle size of biomass plays a critical role in subsequent biofuel manufacturing, where a larger area-to-volume ratio facilitates efficient synthesis while balancing the impact of moisture on biomass storage. To optimize biofuel production efficiency and overcome these challenges, it is imperative to accurately predict the particle size distribution (PSD) of the biomass in the design of efficient preprocessing systems. The population balance model (PBM), upon empirical calibration and validation, can provide rapid prediction of post-milling PSD of granular biomass. However, PSD has limitations related to mass conservation and the absence of moisture considerations. To overcome these drawbacks, a deep learning model called the enhanced deep neural operator (DNO+) is implemented in the code. This model not only retains the capabilities of the PBM in handling complex mapping functions but also incorporates additional factors influencing the system. By considering various experimental conditions such as sieve size and moisture content, the trained DNO+ model can effectively predict the PSD after milling for any given feed PSD. To further reduce the reliance on experimental data, the PBM is integrated into the DNO+ model, resulting in a physics-informed DNO+ (PIDNO+). The PIDNO+ model addresses the non-conservation of quality exhibited by the PBM while inheriting the advantages of the DNO+ model in considering multiple influencing factors. Moreover, the PIDNO+ model significantly reduces the amount of data required for model training. Both deep learning models, i.e., DNO+ and PIDNO+, are excellent in predictive performance, offering swift and accurate machine learning-based predictions. The use of this code that contains these models will assist in guiding the proper milling equipment selection and operational conditions to achieve the desired biomass particle sizes, ensuring the efficiency of subsequent biofuel and bioproduct production processes.

Xia, Yidong [Idaho National Laboratory (INL), Idah↗
DOE OSTI2023

A 1D Model for Nucleation of Ice From Aerosol Particles: An Application to a Mixed‐Phase Arctic Stratus Cloud Layer

Abstract Mixed‐phase clouds (MPCs) have been identified as significant contributors to uncertainties in climate projections, attributable to model representation of processes controlling the formation and loss of supercooled water droplets and ice particles from the atmosphere. Arctic MPCs are commonly widespread and long‐lived, with sustained ice crystal formation processes that challenge current understanding. This study examines the ice‐nucleating particle (INP) reservoir dynamics governing immersion‐mode heterogeneous freezing in an observed case of Arctic MPCs using a simplified 1D aerosol‐cloud model. The model setup includes prescribed dynamical forcings and thermodynamic profiles, and represents INPs as multicomponent and polydisperse particle size distributions. Diagnostic and prognostic approaches to immersion freezing parameterization are compared, including time‐independent (singular) number‐ and surface area‐based descriptions and a time‐dependent description following classical nucleation theory (CNT). The choice of freezing parameterization defines the size of the INP reservoir. The CNT‐based description yields an orders of magnitude larger INP reservoir than the singular parameterizations, which is the dominant factor for sustained ice crystal formation. The efficiency of the freezing process and cloud cooling are of secondary importance. A diagnostic treatment neglecting INP loss is only accurate when the INP reservoir size is large and INP depletion weak. Since a larger INP reservoir sustains ice crystal formation substantially longer, and ice water path scales with ice crystal concentrations for the conditions considered, resolving the source of differences in INP reservoir dynamics due to model implementation is a high priority for advancing climate model physics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Beam energy dependence of net- Λ fluctuations measured by the STAR experiment at the BNL Relativistic Heavy Ion Collider

The measurements of particle multiplicity distributions have generated considerable interest in understanding the fluctuations of conserved quantum numbers in the quantum chromodynamics (QCD) hadronization regime, in particular near a possible critical point and near the chemical freeze-out. Net-protons and net-kaons have been used as proxies for the net-baryon number and net-strangeness, respectively. We report the measurement of efficiency- and centrality-bin width-corrected cumulant ratios (C 2 /C 1 , C 3 /C 2 ) of net- Λ distributions, in the context of both strangeness and baryon number conservation, as a function of collision energy, centrality, and rapidity. The results are for Au + Au collisions at five beam energies ( √s NN = 19.6 , 27, 39, 62.4, and 200 GeV) recorded with the Solenoidal Tracker at RHIC (STAR). We compare our results to the Poisson and negative binomial (NBD) expectations, as well as to ultrarelativistic quantum molecular dynamics (UrQMD) and hadron resonance gas (HRG) model predictions. Both NBD and Poisson baselines agree with data within the statistical and systematic uncertainties. UrQMD describes the measured net- Λ C 1 and C 3 at 200 GeV reasonably well but deviates from C 2 , and the deviation increases as a function of collision energy. The ratios of the measured cumulants show no features of critical fluctuations. The chemical freeze-out temperatures extracted from a recent HRG calculation, which was successfully used to describe the net-proton, net-kaon, and net-charge data, indicate Λ freeze-out conditions similar to those of kaons. However, large deviations are found when comparing with temperatures obtained from net-proton fluctuations. The net- Λ cumulants show a weak but finite dependence on the rapidity coverage in the acceptance of the detector, which can be attributed to quantum number conservation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Titanium Dioxide Nanomaterial Ink Production Through Laser Ablation Synthesis in Solution for Printed Electronics Applications

Flexible and printed electronics have become increasingly popular as they make possible the production of flexible, low-cost, multifunction devices that are unachievable through traditional manufacturing methods. The printed films are significantly impacted and thus limited by the existing ink production process. Herein, an alternate technique of generating high-quality titanium dioxide (TiO 2 ) nanoparticle ink compatible with aerosol jet printing using laser ablation synthesis in solution (LASiS) is showcased. Dynamic light scattering data and transmission electron microscopy confirm the particle size distribution. UV–vis measurements are performed, and the Beer–Lambert relationship is used to determine the concentration of the generated ink. The inks generated at two different repetition rates are compared: 200 kHz and 1 MHz. X-Ray diffraction analysis of the aerosol jet printed thin film post-thermal sintering confirms the grain size and phase purity of the printed thin films. This work demonstrates the effectiveness of the LASiS technique in producing printable nanoparticle inks with little-to-no postprocessing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Multicolor Inks of Black Phosphorus for Midwave‐Infrared Optoelectronics

Abstract Black phosphorus (bP) based ink with a bulk bandgap of 0.33 eV ( λ = 3.7 µm) has recently been shown to be promising for large‐area, high performance mid‐wave infrared (MWIR) optoelectronics. However, the development of multicolor bP inks expanding across the MWIR wavelength range has been challenging. Here a multicolor ink process based on bP with spectral emission tuned from 0.28 eV ( λ = 4.4 µm) to 0.8 eV ( λ = 1.5 µm) is demonstrated. Specifically, through the reduction of bP particle size distribution (i.e., lateral dimension and thickness), the optical bandgap systematically blueshifts, reaching up to 0.8 eV. Conversely, alloying bP with arsenic (bP 1− x As x ) induces a redshift in the bandgap to 0.28 eV. The ink processed films are passivated with an infrared‐transparent epoxy for stable infrared emission in ambient air. Utilizing these multicolor bP‐based inks as an infrared light source, a gas sensing system is demonstrated that selectively detects gases, such as CO 2 and CH 4 whose absorption band varies around 4.3 and 3.3 µm, respectively. The presented ink formulation sets the stage for the advancement of multiplex MWIR optoelectronics, including spectrometers and spectral imaging using a low‐cost material processing platform.

Kim, Jae Ik↗
DOE OSTI2021

Revisiting Discharge Mechanism of CF x as a High Energy Density Cathode Material for Lithium Primary Battery

Lithium/fluorinated graphite (Li/CFx) primary batteries show great promise for applications in a wide range of energy storage systems due to their high energy density (>2100 Wh kg –1 ) and low self-discharge rate (<0.5% per year at 25 °C). While the electrochemical performance of the CF x cathode is indeed promising, the discharge reaction mechanism is not thoroughly understood to date. In this article, a multiscale investigation of the CF x discharge mechanism is performed using a novel cathode structure to minimize the carbon and fluorine additives for precise cathode characterizations. Titration gas chromatography, X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, cross-sectional focused ion beam, high-resolution transmission electron microscopy, and scanning transmission electron microscopy with electron energy loss spectroscopy are utilized to investigate this system. Results show no metallic lithium deposition or intercalation during the discharge reaction. Crystalline lithium fluoride particles uniformly distributed with <10 nm sizes into the CF x layers, and carbon with lower sp2 content similar to the hard-carbon structure are the products during discharge. This article deepens the understanding of CF x as a high energy density cathode material and highlights the need for future investigations on primary battery materials to advance performance.

25 ENERGY STORAGE↗