Search NASA⌕ Search

SEARCH · Search NASA

Results for “particle receiver”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Energetics of the magnetosphere

The approximate magnitudes of power inputs and energies associated with the earth's magnetosphere were derived. The nearest 40 R sub E of the plasma sheet current receive some 3.10 to the 11th power watt, and much of this goes to the Birkeland currents, which require 1-3 10 to the 11th power watt. Of that energy, about 30 percent appears as the energy of auroral particles and most of the rest as ionosphere joule heating. The ring current contains about 10 to the 15th power joule at quiet times, several times as much during magnetic storms, and the magnetic energy stored in the tall lobes is comparable. Substorm energy releases may range at 1.5 to 30 10 to the 11th power watt. Compared to these, the local energy release rate by magnetic merging in the magnetosphere is small. Merging is essential for the existence of open field lines, which make such inputs possible. Merging also seems to be implicated in substorms: most of the released energy only becomes evident far from the merging region, though some particles may gain appreciable energy in that region itself, if the plasma sheet is squeezed out completely and the high latitude lobes interact directly.

Stern, D. P.↗

System feasibility study of a microwave/millimeter-wave radar for space debris tracking

A 35 GHz millimeter-wave radar system has been studied for space debris tracking. The objective is to track the particles ranging in size from 4 mm to 80 mm up to a range of 25 km. The system requires various state-of-the-art technologies including phased arrays, monopulse tracking, pulse compression, high power transmitters, low noise receivers, and pulse integration signal processing techniques.

Chang, Kai↗

Determining Design Criteria for Feeding Biomass into a Fluidized Bed Using a Feed Screw

Many pathways have been discovered for the thermochemical conversion of biomass to products. These pathways often show very promising results on the benchtop scale and could be economical with the appropriate scale up. However, many of the fundamental challenges of scaling up thermochemical reactions are not well understood. One primary problem area that rarely receives much upfront attention is feeding large quantities of biomass into thermochemical reactors. As biomass transitions from ambient to reactor conditions, it undergoes chemical and physical changes that affect its flowability. Often these changes lead to agglomeration of feed particles within the transfer screw, leading to large clumps of feed entering and disrupting the fluidized bed, or more critically leading to a plug in the feed screw causing costly downtime and maintenance to remove. This transitional phase must be better understood for scale up of conversion technologies to be successful. The Feedstock-Conversion Interface Consortium (FCIC) is a collaboration of eight National Laboratories. FCIC is currently conducting research on screw feeding of biomass into thermochemical fluidized bed reactors. Heat transfer models have been constructed for the screw/reactor interface. Mechanical forces on biomass within screw feeder are being determined, as well as how those forces change by varying feed screw design. Feedstock physical and chemical properties are then being measured along these temperature and mechanical force gradients. This work will better inform feed screw design for scale up, increasing the success rate of future biorefineries. Discussion will include research approach, testing, and preliminary results.

09 BIOMASS FUELS↗

Atmospheric Ionizing Radiation and the High Speed Civil Transport

Atmospheric ionizing radiation is produced by extraterrestrial radiations incident on the Earth's atmosphere. These extraterrestrial radiations are of two sources: ever present galactic cosmic rays with origin outside the solar system and transient solar particle events that are at times very intense events associated with solar activity lasting several hours to a few days. Although the galactic radiation penetrating through the atmosphere to the ground is low in intensity, the intensity is more than two orders of magnitude greater at commercial aircraft altitudes. The radiation levels at the higher altitudes of the High Speed Civil Transport (HSCT) are an additional factor of two higher. Ionizing radiation produces chemically active radicals in biological tissues that alter the cell function or result in cell death. Protection standards against low levels of ionizing radiation are based on limitation of excess cancer mortality or limitation of developmental injury resulting in permanent damage to the offspring during pregnancy. The crews of commercial air transport operations are considered as radiation workers by the EPA, the FAA, and the International Commission on Radiological Protection (ICRP). The annual exposures of aircrews depend on the latitudes and altitudes of operation and flight time. Flight hours have significantly increased since deregulation of the airline industry in the 1980's. The FAA estimates annual subsonic aircrew exposures to range from 0.2 to 9.1 mSv compared to 0.5 mSv exposure of the average nuclear power plant worker in the nuclear industry. The commercial aircrews of the HSCT may receive exposures above recently recommended allowable limits for even radiation workers if flying their allowable number of flight hours. An adequate protection philosophy for background exposures in HSCT commercial airtraffic cannot be developed at this time due to current uncertainty in environmental levels. In addition, if a large solar particle event occurs during flight at HSCT altitudes then passengers and crew may greatly exceed allowable limits unless means are available to reduce exposures.

Maiden, D. L.↗

Ejecta patterns of Meteor Crater, Arizona derived from the linear un-mixing of TIMS data and laboratory thermal emission spectra

Accurate interpretation of thermal infrared data depends upon the understanding and removal of complicating effects. These effects may include physical mixing of various mineralogies and particle sizes, atmospheric absorption and emission, surficial coatings, geometry effects, and differential surface temperatures. The focus is the examination of the linear spectral mixing of individual mineral or endmember spectra. Linear addition of spectra, for particles larger than the wavelength, allows for a straight-forward method of deconvolving the observed spectra, predicting a volume percent of each endmember. The 'forward analysis' of linear mixing (comparing the spectra of physical mixtures to numerical mixtures) has received much attention. The reverse approach of un-mixing thermal emission spectra was examined with remotely sensed data, but no laboratory verification exists. Understanding of the effects of spectral mixing on high resolution laboratory spectra allows for the extrapolation to lower resolution, and often more complicated, remotely gathered data. Thermal Infrared Multispectral Scanner (TIMS) data for Meteor Crater, Arizona were acquired in Sep. 1987. The spectral un-mixing of these data gives a unique test of the laboratory results. Meteor Crater (1.2 km in diameter and 180 m deep) is located in north-central Arizona, west of Canyon Diablo. The arid environment, paucity of vegetation, and low relief make the region ideal for remote data acquisition. Within the horizontal sedimentary sequence that forms the upper Colorado Plateau, the oldest unit sampled by the impact crater was the Permian Coconino Sandstone. A thin bed of the Toroweap Formation, also of Permian age, conformably overlays the Coconino. Above the Toroweap lies the Permian Kiabab Limestone which, in turn, is covered by a thin veneer of the Moenkopi Formation. The Moenkopi is Triassic in age and has two distinct sub-units in the vicinity of the crater. The lower Wupatki member is a fine-grained sandstone, while the upper Moqui member is a fissile siltstone. Ejecta from these units are preserved as inverted stratigraphy up to 2 crater radii from the rim. The mineralogical contrast between the units, relative lack of post-emplacement erosion and ejecta mixing provide a unique site to apply the un-mixing model. Selection of the aforementioned units as endmembers reveals distinct patterns in the ejecta of the crater.

Ramsey, Michael S.↗

Visualization of Microbial Biomarkers by Scanning Electron Microscopy

We are developing tools to link the biochemical structure of selected biomarkers with putative biogenic structures observed in mineralized samples. The detection of evidence of life on Mars and other planets will rely on methods that can discriminate compounds formed exclusively by living organisms. While biogenic compounds, such as amino acids and nucleotides have been discovered in extraterrestrial sources, such as meteorites and comets, their formation can be explained by abiotic means. The formation of cellular structures, or more elaborate organic molecules, such as complex lipids, proteins or nucleic acids, however, is strongly correlated to the presence of even the most primitive life processes. Recent evidence lends support to the hypothesis that life may have once existed on Mars. Carbonate globules and ppm concentrations of polycyclic aromatic hydrocarbons (PAHs) have been described in ALH84001, a meteorite originating from Mars ejecta captured by Earth over 13,000 years ago. The localized high concentration of PAHs that follow an increasing gradient from the intact fusion crust towards the interior corresponds to microgram quantities of hydrocarbon. Even though ALH84001 and other similar meteorites have withstood the forces capable of ejecting rock through Mars' escape velocity, upon entering Earth's atmosphere, their core temperatures are likely not to have been raised significantly, as evidenced by the survival of remanent magnetic signatures. Ideal biomarkers of ancient or modern biological life would include molecules that are (or were) pervasive and highly resistant to degradation. Also, requisite methods of detection should be simple, extremely sensitive and broadly inclusive (NASA SP-530). Lipopolysaccharide (LPS), peptidoglycan or pseudopeptidoglycan and beta-glucan are microbial cell wall components which together cover the entire microbial spectrum of eubacteria, archea and fungi. They are all remarkably resistant to thermal degradation. Fortunately, many antimicrobial defense systems of higher organisms require sensitive detection to combat microbial pathogens. We employ here the primitive immune system of the evolutionarily ancient horseshoe crab, Limulus polyphemus. This species relies on multi-enzyme signal amplification detection of cell wall molecules and they can be applied to the development of useful detectors of life. An extension of this work includes the visualization of microbial signatures by labeling LAL components with chromogenic or electron dense markers. The protein Limulus Anti-LPS Factor (LALF) has an extremely high affinity for LPS. By coupling LALF binding with colloidal gold labels we demonstrate a correlation of the structures visible by electron microscopy with biochemical evidence of microbial cell wall materials. Pure silica particles were mixed with cultures of E. coli (10(exp 6) cfu/mL). Samples were washed sequentially with buffered saline, LALF, antibody to LALF and finally colloidal gold-labeled Protein A. Negative controls were not exposed to E. coli but received identical treatment otherwise. Samples were coated with carbon and imaged on a JEOL JSM-840 scanning electron microscope with LaB6 source in the back scatter mode with the JEOL annular back scatter detector. 20 nm-scale black spots in this contrast-reversed image originate from electrons back-scattered by gold atoms. Negative controls did not give any signal. Future work will expand application of this technique to soil simulants and mineralized rock samples.

Wainwright, Norman R.↗

Biomaterials and Magnetic fields for Cancer Therapy

The field of biomaterials has emerged as an important topic in the purview of NASA s new vision of research activities in the Microgravity Research Division. Although this area has an extensive track record in the medical field as borne out by the routine use of polymeric sutures, implant devices, and prosthetics, novel applications such as tissue engineering, artificial heart valves and controlled drug delivery are beginning to be developed. Besides the medical field, biomaterials and bio-inspired technologies are finding use in a host of emerging interdisciplinary fields such as self-healing and self-assembling structures, biosensors, fuel systems etc. The field of magnetic fluid technology has several potential applications in medicine. One of the emerging fields is the area of controlled drug delivery, which has seen its evolution from the basic oral delivery system to pulmonary to transdermal to direct inoculations. In cancer treatment by chemotherapy for example, targeted and controlled drug delivery has received vast scrutiny and substantial research and development effort, due to the high potency of the drugs involved and the resulting requirement to keep the exposure of the drugs to surrounding healthy tissue to a minimum. The use of magnetic particles in conjunction with a static magnetic field allows smart targeting and retention of the particles at a desired site within the body with the material transport provided by blood perfusion. Once so located, the therapeutical aspect (radiation, chemotherapy, hyperthermia, etc.) of the treatment, now highly localized, can be implemented.

Ramachandran, Narayanan↗

Root exudates shift how N mineralization and N fixation contribute to the plant-available N supply in low fertility soils

Nitrogen (N) availability is a primary constraint to plant productivity, especially in marginal lands with inherently low fertility. Root exudates change with plant nutrient status, and are expected to affect the microbially-mediated N transformations (gross N mineralization vs N fixation) in low fertility soil (low soil organic matter). To explore this possibility, we sampled soils from two monoculture switchgrass (var. Cave-In-Rock) plot with and without N addition at two marginal land sites in Michigan, USA. In a two-week lab incubation, we quantified the effect of different root exudates on gross N mineralization and N fixation by adding simulated root exudates (carbohydrates, organic acids) at a rate of 100 μg C g –1 day –1 . On average, adding carbohydrates to low fertility soil increased the soil respiration by 254%, the dissolved organic carbon (DOC) by 366% and reduced dissolved organic N (DON) by 40%. In contrast, soils receiving organic acids had 159% more soil respiration, 163% higher DOC concentration and the DON concentration increased by 49%. Analysis of the C recovery in measured pools revealed that root exudates C inputs were nearly equivalent to the DOC, microbial biomass carbon (MBC), and soil respiration in sandy soil, but only 45–74% of the root exudate C was recovered in these pools in the sandy loam soil. This suggests that root exudate C may be adsorbed to mineral particles in the sandy loam soil. Soil treated with organic acids had higher gross N mineralization and N immobilization rates than soil with carbohydrates addition. Adding carbohydrates significantly increased the free-living N fixation rates, compared to organic acid addition. Changes in soil pH, and DON induced by root exudate addition had strong association with N transformation rates and N availability. Gross N mineralization produced more plant-available N than N fixation, as evidenced by higher inorganic N concentration in soils receiving organic acids than carbohydrates. Here, by quantifying how different root exudates affect the contribution of N mineralization and N fixation to the plant-available N pool in low fertility soils, this study enhances our understanding of the “C for N” exchange in the plant rhizosphere.

54 ENVIRONMENTAL SCIENCES↗

The effects of proton exposure on neurochemistry and behavior

Future space missions will involve long-term travel beyond the magnetic field of the Earth, where astronauts will be exposed to radiation hazards such as those that arise from galactic cosmic rays. Galactic cosmic rays are composed of protons, alpha particles, and particles of high energy and charge (HZE particles). Research by our group has shown that exposure to HZE particles, primarily 600 MeV/n and 1 GeV/n 56Fe, can produce significant alterations in brain neurochemistry and behavior. However, given that protons can make up a significant portion of the radiation spectrum, it is important to study their effects on neural functioning and on related performance. Therefore, these studies examined the effects of exposure to proton irradiation on neurochemical and behavioral endpoints, including dopaminergic functioning, amphetamine-induced conditioned taste aversion learning, and spatial learning and memory as measured by the Morris water maze. Male Sprague-Dawley rats received a dose of 0, 1.5, 3.0 or 4.0 Gy of 250 MeV protons at Loma Linda University and were tested in the different behavioral tests at various times following exposure. Results showed that there was no effect of proton irradiation at any dose on any of the endpoints measured. Therefore, there is a contrast between the insignificant effects of high dose proton exposure and the dramatic effectiveness of low dose (<0.1 Gy) exposures to 56Fe particles on both neurochemical and behavioral endpoints. Published by Elsevier Ltd on behalf of COSPAR.

Non-NASA Center↗

Rendezvous algorithms for large-scale modeling and simulation

Rendezvous algorithms encode a communication pattern that is useful when processors sending data do not know who the receiving processors should be, or vice versa. The idea is to define an intermediate decomposition where datums from different sending processors can ”rendezvous” to perform a computation, in a manner that both the senders and eventual receivers of the results can identify the appropriate rendezvous processor. Though they were originally designed for interpolating between overlaid grids with independent parallel decompositions (Plimpton et al., 2004), we have recently found rendezvous algorithms useful for a variety of operations in particle- or grid-based simulation codes when running large problems on large numbers of processors. In particular, we show they can perform well when a load-balanced intermediate decomposition is randomized and not spatial, requiring all-to-all communication to move data between processors. In this case rendezvous algorithms leverage the large bisection communication bandwidths which parallel machines provide. We describe how rendezvous algorithms work in a scientific computing context and give specific examples for molecular dynamics and Direct Simulation Monte Carlo codes which result in dramatic performance improvements versus simpler algorithms which do not scale as well. We explain how a generic rendezvous algorithm can be implemented, and also point out similarities with the MapReduce paradigm popularized by Google and Hadoop.

97 MATHEMATICS AND COMPUTING↗

Pioneer Jupiter Orbiter/Probe mission. I - Spacecraft system description

This paper discusses the Pioneer Jupiter Orbiter/Probe mission with emphasis on the orbiter spacecraft system. In this mission, the atmosphere of Jupiter will be investigated for physical and chemical structure by a probe which survives entry and transmits data while descending below the 10-bar level. The spacecraft deflects after probe separation to a nonimpacting approach trajectory, acts as a communications relay for data from the descending probe, and propulsively enters an orbit about Jupiter. As an orbiter, it explores the environment of Jupiter for three years, making in situ measurements of the particles and fields of the Jovian magnetosphere together with remote measurements (including images) of Jupiter and the Galilean satellites. The spacecraft system is logically based on the design of Pioneers 10 and 11 with modifications for these different mission requirements: antenna, receiver, and memory for the probe-spacecraft data link; a retropropulsion system for the high velocity-change requirements of orbit insertion; a data system consistent with the requirements of a line-scan imaging system; and an improved complement of radioisotope-thermoelectric-generator power sources to provide adequate power six years after launch.

Lassen, H. A.↗

Radiation protection design considerations for man in geosynchronous orbits

A description is presented of preliminary studies which have been carried out to identify design requirements and mission constraints imposed by the geosynchronous radiation environment. The radiation species of dominant impact are the trapped electrons and solar flare particles. The criterion used in the conducted shielding design analysis has been to limit the skin dose to 100 rems for 3 months. The analysis included the optimization of an electron/bremsstrahlung shield for residence within the vehicle, the minimization of the dose received in extravehicular activity, and the calculation of special shield requirements for solar flares. An investigation was conducted of the potential benefits accruing from a three-layered composite shield with part of the aluminum layer replaced with a lower atomic number material. The materials considered were polyethylene, carbon, beryllium, and lithium hydride.

Rossi, M. L.↗

Accurate simulation of direct laser acceleration in a laser wakefield accelerator

In a laser wakefield accelerator (LWFA), an intense laser pulse excites a plasma wave that traps and accelerates electrons to relativistic energies. When the pulse overlaps the accelerated electrons, it can enhance the energy gain through direct laser acceleration (DLA) by resonantly driving the betatron oscillations of the electrons in the plasma wave. The traditional particle-in-cell (PIC) algorithm, although often the tool of choice to study DLA, contains inherent errors due to numerical dispersion and the time staggering of the electric and magnetic fields. Furthermore, conventional PIC implementations cannot reliably disentangle the fields of the plasma wave and laser pulse, which obscures interpretation of the dominant acceleration mechanism. Here, a customized field solver that reduces errors from both numerical dispersion and time staggering is used in conjunction with a field decomposition into azimuthal modes to perform PIC simulations of DLA in an LWFA. Comparisons with traditional PIC methods, model equations, and experimental data show improved accuracy with the customized solver and convergence with an order-of-magnitude fewer cells. Furthermore, the azimuthal-mode decomposition reveals that the most energetic electrons receive comparable energy from DLA and LWFA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterizing PM 2.5 Emissions and Temporal Evolution of Organic Composition from Incense Burning in a California Residence

The chemical composition of incense-generated organic aerosol in residential indoor air has received limited attention in Western literature. In this study, we conducted incense burning experiments in a single-family California residence during vacancy. Here, we report the chemical composition of organic fine particulate matter (PM 2.5 ), associated emission factors (EFs), and gas-particle phase partitioning for indoor semivolatile organic compounds (SVOCs). Speciated organic PM 2.5 measurements were made using two-dimensional gas chromatography coupled with high-resolution time-of-flight mass spectrometry (GC×GC-HR-ToF-MS) and semivolatile thermal desorption aerosol gas chromatography (SV-TAG). Organic PM 2.5 EFs ranged from 7 to 31 mg g –1 for burned incense and were largely comprised of polar and oxygenated species, with high abundance of biomass-burning tracers such as levoglucosan. Differences in PM 2.5 EFs and chemical profiles were observed in relation to the type of incense burned. Nine indoor SVOCs considered to originate from sources other than incense combustion were enhanced during incense events. Time-resolved concentrations of these SVOCs correlated well with PM 2.5 mass (R 2 > 0.75), suggesting that low-volatility SVOCs such as bis(2-ethylhexyl)phthalate and butyl benzyl phthalate partitioned to incense-generated PM 2.5 . Both direct emissions and enhanced partitioning of low-volatility indoor SVOCs to incense-generated PM 2.5 can influence inhalation exposures during and after indoor incense use.

54 ENVIRONMENTAL SCIENCES↗

Arctic Black Carbon Aerosol Deposition Study North Slope of Alaska 2020- Sonic Anemometer Measurements

Particles are removed from the atmosphere through both wet and dry deposition. These processes are poorly understood, though they constitute important uncertainties in climate and air quality models. This project aims to use observational constraints on particle fluxes to improve model representations of dry deposition. Within this data set, we measured wind properties using a sonic anemometer. Measurements were made at the meteorological tower between 9 Sept and 25 Oct 2021. This site is a coastal tundra location, and received snow during the project.

Gill Windmaster 3D Ultrasonic Anemometer↗

Space radiation shielding for a Martian habitat

Radiation shielding analyses are performed for a candidate Mars base habitat. The Langley cosmic ray transport code and the Langley nucleon transport code are used to quantify the transport and attenuation of galactic cosmic rays and solar flare protons through both the Martian atmosphere and regolith shielding. Doses at the surface and at various altitudes were calculated in a previous study using both a high-density and a low-density Mars atmosphere model. This study extends the previous low-density results to include the further transport of the ionizing radiation that reaches the surface through additional shielding provided by Martian regolith. A four-compound regolith model, which includes SiO2, Fe2O3, MgO, and CaO, was selected based on the chemistry of the Viking 1 Lander site. The spectral fluxes of heavy charged particles and the corresponding dosimetric quantities are computed for a series of thicknesses in the shield media after traversing the atmosphere. These data are then used as input to algorithms for a specific shield geometry. The results are presented as the maximum dose received in the center of the habitat versus various shield thicknesses for a base at an altitude of 0 km and 8 km.

Simonsen, Lisa C.↗

Radiative transfer in cometary dust atmospheres: Critique of recent developments

The gas and dust production rates of comets near the sun are intimately linked to the fate of the solar radiation as it is scattered and partially absorbed by the cometary dust envelope or halo surrounding the comet's nucleus. The radiation of nuclear matter (mostly water ice) and the release of dust particles embedded in the ice which are entrained by the escaping gas and subsequently form a dust atmosphere or halo. On the other hand, the interaction of the dust cloud with the solar radiation is in turn responsible for the amount of radiative energy received by the nucleus and thus determines the evaporation rate. It is shown that recent attempts to formulate this problem quantitatively are in error. The correct formulation is given and it is pointed out that negative extinction (enhancement of the primary radiation received by the nucleus due to multiple scattering) may not be as large as predicted.

Vonroos, O.↗

A Combined Study Investigating the Insoluble and Soluble Organic Compounds in Category 3 Carbonaceous Itokawa Particles Recovered by the Hayabusa Mission

At the 3rd International Announcement of Opportunity (AO), we have been approved for five Category 3 carbonaceous Itokawa particles (RA-QD02-0012, RA-QD02-0078, RB-CV-0029, RB-CV-0080 and RB-QD04-0052) recovered by the first Hayabusa mission of JAXA. In this investigation, we aim to provide a comprehensive study to characterize and account for the presence of carbon-bearing phases as suggested by the initial Scanning Electron Microscopy (SEM) analysis carried out by JAXA at the curation facility, and to describe the mineralogical components of the particles. The insoluble organic content of Itokawa particle has been investigated with the use of micro-Raman spectroscopy by Kitajima and co-workers [1]. The Raman spectra of Itokawa particles show broad G- and D-bands typical of low temperature material which offers an interesting contrast to the high metamorphic grade (LL4-6) of the Itokawa parent body. Amino acid analysis has been conducted by Naraoka et al. [2] to study the soluble organic component of Itokawa particles, but since it was a preliminary study and thus did not have the opportunity to target on Category 3 carbonaceous particles, only terrestrial contaminants were identified. The investigation will be carried out in the following order prioritized according to the progressive damage the analytical techniques can induce: (1) micro-Raman spectrometry, (2) two-step laser mass spectrometry (micro-L2MS), (3) ultra-high performance liquid chromatography with fluorescence detection and time-of-flight mass spectrometry (LC-FD/ToF-MS), and optimally if we can recover the particles after wet chemistry analysis, we will mount the samples and perform (4) electron beam microscopy (SEM, electron back-scattered diffraction [EBSD]) and (5) carbon X-ray absorption near edge structure spectroscopy (C-XANES). We will begin the analytical procedures upon receiving the samples in September/October. This work will provide us with an understanding of the variety and origins of the carbon-bearing phases present in primitive solar system bodies from a direct sample-returned mission, which is less likely hampered by risks of terrestrial contamination as compared to meteorite finds and falls.

Chan, Q. H. S.↗