Search NASA⌕ Search

SEARCH · Search NASA

Results for “predictive distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Potential flow analysis of glaze ice accretions on an airfoil

The results of an analytical/experimental study of the flow fields about an airfoil with leading edge glaze ice accretion shapes are presented. Tests were conducted in the Icing Research Tunnel to measure surface pressure distributions and boundary layer separation reattachment characteristics on a general aviation wing section to which was affixed wooden ice shapes which approximated typical glaze ice accretions. Comparisons were made with predicted pressure distributions using current airfoil analysis codes as well as the Bristow mixed analysis/design airfoil panel code. The Bristow code was also used to predict the separation reattachment dividing streamline by inputting the appropriate experimental surface pressure distribution.

Zaguli, R. J.↗

Cross Section Measurement of Exclusive ¿-Meson Electroproduction off the Proton at CLAS12

This analysis studies the exclusive ¿ meson electroproduction process ep ¿ e 'p ' at CLAS12 in the kinematic region 0.39 = Q2 = 8.38 GeV2 , 1.97 = W = 4.03 GeV, and 0.17 = -t = 7.26 GeV2 . Cross section s(Q2 , W) and differential cross section ds dt (Q2 , W, t) measurements are reported. The scaling of the overall cross section was determined to be 1/Q6.47±0.97, which is consistent with the Generalized Parton Distribution (GPD) prediction of 1/Q6 . The ratios of the longitudinal and transverse cross sections, R = sL sT , are extracted from the angular decay distributions for four values of Q2 and are found to be consistent with the GPD scaling prediction. The mean-square gluonic radius of the proton ¿b 2 ¿g is extracted from the t-dependence of the differential cross sections ds dt in the kinematic region 0.12 = xB = 0.39, the first such measurement in the valence regime.

Moran, Patrick (ORCID:0000000273437292)↗

Flight research on natural laminar flow nacelles - A progress report

This paper presents a progress report on an ongoing flight experiment for natural laminar flow nacelles. The results given herein were obtained during the first phase of the experiment, in which an instrumented natural laminar flow nacelle fairing was flight tested in the presence of turbofan engine noise and a controlled noise source. The results indicate that with the controlled noise source off, natural laminar flow was measured as far aft as 37 percent of the fairing length. The transition front was irregular in contour, and the extent of natural laminar flow was significantly affected by the relative flow angle for the fairing. In addition to these test results, the paper discusses the results of some recent computational analyses to predict pressure distributions and transition location, and to explain some of the data trends. Comparisons between measured and predicted data indicate that the analytical methods successfully predicted trends for the baseline (no controlled noise source) studies.

Hastings, E. C., Jr.↗

Preliminary Results for Using Uncertainty and Out-of-distribution Detection to Identify Unreliable Predictions.

As machine learning (ML) models are deployed into an ever-diversifying set of application spaces, ranging from self-driving cars to cybersecurity to climate modeling, the need to carefully evaluate model credibility becomes increasingly important. Uncertainty quantification (UQ) provides important information about the ability of a learned model to make sound predictions, often with respect to individual test cases. However, most UQ methods for ML are themselves data-driven and therefore susceptible to the same knowledge gaps as the models themselves. Specifically, UQ helps to identify points near decision boundaries where the models fit the data poorly, yet predictions can score as certain for points that are under-represented by the training data and thus out-of-distribution (OOD). One method for evaluating the quality of both ML models and their associated uncertainty estimates is out-of-distribution detection (OODD). We combine OODD with UQ to provide insights into the reliability of the individual predictions made by an ML model.

97 MATHEMATICS AND COMPUTING↗

Multilabel proportion prediction and out-of-distribution detection on gamma spectra of short-lived fission products

In the machine learning problem of multilabel classification, the objective is to determine for each test instance which classes the instance belongs to. In this work, we consider an extension of multilabel classification, called multilabel proportion prediction, in the context of radioisotope identification (RIID) using gamma spectra data. We aim to not only predict radioisotope proportions, but also identify out-of-distribution (OOD) spectra. We achieve this goal by viewing gamma spectra as discrete probability distributions, and based on this perspective, we develop a custom semi-supervised loss function that combines a traditional supervised loss with an unsupervised reconstruction error function. Our approach was motivated by its application to the analysis of short-lived fission products from spent nuclear fuel. In particular, we demonstrate that a neural network model trained with our loss function can successfully predict the relative proportions of 37 radioisotopes simultaneously. The model trained with synthetic data was then applied to measurements taken by Pacific Northwest National Laboratory (PNNL) to conduct analysis typically done by subject-matter experts. Here, we also extend our approach to successfully identify when measurements are OOD, and thus should not be trusted, whether due to the presence of a novel source or novel proportions.

Anomaly detection↗

Damage Profiles and Ion Distribution in Pt-irradiated SiC

Single crystalline 6H-SiC samples were irradiated at 150 K with 2 MeV Pt ions. The local volume swelling was determined by electron energy loss spectroscopy (EELS), and a nearly sigmoidal dependence on irradiation dose is observed. The disorder profiles and ion distribution were determined by Rutherford backscattering spectrometry (RBS), transmission electron microscopy, and secondary ion mass spectrometry. Since the volume swelling reaches 12% over the damage region at high ion fluence, the effect of lattice expansion is considered and corrected for in the analysis of RBS spectra to obtain depth profiles. Projectile and damage profiles are estimated by SRIM (Stopping and Range of Ions in Matter).When compared with the measured profiles, the SRIM code predictions of ion distribution and the damage profiles are underestimated due to significant overestimation of the electronic stopping power for the slow heavy Pt ions. By utilizing the reciprocity method, which is based on the invariance of the inelastic energy loss in ion-solid collisions against interchange of projectile and target atom, a much lower electronic stopping power is deduced. A simple approach, based on reducing the density of SiC target in SRIM simulation, is proposed to compensate the overestimated SRIM electronic stopping power values, which results in improved agreement between predicted and measured damage profiles and ion ranges.

Environmental Molecular Sciences Laboratory↗

SU-F-T-513: Dosimetric Validation of Spatially Fractionated Radiotherapy Using Gel Dosimetry

Purpose: Spatially fractionated radiation therapy, also known as GRID therapy, is used to treat large solid tumors by irradiating the target to a single dose of 10–20Gy through spatially distributed beamlets. We have investigated the use of a 3D gel for dosimetric characterization of GRID therapy. Methods: GRID therapy is an external beam analog of volumetric brachytherapy, whereby we produce a distribution of hot and cold dose columns inside the tumor volume. Such distribution can be produced with a block or by using a checker-like pattern with MLC. We have studied both types of GRID delivery. A cube shaped acrylic phantom was filled with polymer gel and served as a 3D dosimeter. The phantom was scanned and the CT images were used to produce two plans in Pinnacle, one with the grid block and one with the MLC defined grid. A 6MV beam was used for the plan with a prescription of 1500cGy at dmax. The irradiated phantom was scanned in a 3T MRI scanner. Results: 3D dose maps were derived from the MR scans of the gel dosimeter and were found to be in good agreement with the predicted dose distribution from the RTP system. Gamma analysis showed a passing rate of 93% for 5% dose and 2mm DTA scoring criteria. Both relative and absolute dose profiles are in good agreement, except in the peripheral beamlets where the gel measured slightly higher dose, possibly because of the changing head scatter conditions that the RTP is not fully accounting for. Our results have also been benchmarked against ionization chamber measurements. Conclusion: We have investigated the use of a polymer gel for the 3D dosimetric characterization and evaluation of GRID therapy. Our results demonstrated that the planning system can predict fairly accurately the dose distribution for GRID type therapy.

60 APPLIED LIFE SCIENCES↗

Potential distribution of an invasive pest, Eu platypus parallelus , in China as predicted by Maxent

Abstract BACKGROUND Eu platypus parallelus is a highly polyphagous invasive pest native to Central and South America. In recent years it has invaded many countries in Africa and Asia and resulted in considerable economic loss. In China it has been reported to have invaded Taiwan, and been also recorded in Hainan Province. Until now there has been no invasion into the mainland. In order to better manage this invasive pest, here we predicted the suitable area of E. parallelus in China by the Maxent model. RESULTS The Maxent model predicted the potential distribution of E. parallelus with a test AUC value of 0.962 and a training AUC value of 0.978. Temperature seasonality (Bio_04), annual temperature range (Bio_07), annual precipitation (Bio_12) and mean temperature of the coldest quarter (Bio_11) were the strongest predictors of E. parallelus distribution with 32.1%, 19.8%, 15% and 10.4% contributions, respectively. The potential suitable area for E. parallelus was mainly distributed in the southeastern coast, the southwestern border, and Taiwan and Hainan provinces in China, and the highly suitable areas were located in the northern coast of Hainan Province and the southwestern coast of Taiwan Province. This pest prefers a stable, warm and rainy climate, which indicates that tropics and subtropics would be its ideal area. CONCLUSION Eu platypus parallelus has invaded Hainan and Taiwan in China. Measures should be taken to prevent it from spreading on these two islands. Moreover, strict quarantine, biological study and control measures are necessary to block its spread, invasion and damage, especially in these climate‐suitable areas. © 2018 Society of Chemical Industry

Tang, Jihong↗

Statistical modelling of discharge behavior of atmospheric pressure dielectric barrier discharge

In this work, stochastic behavior of atmospheric pressure dielectric barrier discharge (DBD) has been investigated. The experiment is performed in a DBD reactor consisting of a pair of stainless steel parallel plate electrodes powered by a 50 Hz ac high voltage source. Current pulse amplitude distributions for different space gaps and the time separation between consecutive current pulses are studied. A probability distribution function is proposed to predict the experimental distribution function for the current pulse amplitudes and the occurrence of the transition regime of the pulse distribution. Breakdown voltage at different positions on the dielectric surface is suggested to be stochastic in nature. The simulated results based on the proposed distribution function agreed well with the experimental results and able to predict the regime of transition voltage. This model would be useful for the understanding of stochastic behaviors of DBD and the design of DBD device for effective operation and applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bayesian reconstruction of the velocity distribution of weakly interacting massive particles from direct dark matter detection data

In this paper, we extended our earlier work on the reconstruction of the (time-averaged) one-dimensional velocity distribution of Galactic Weakly Interacting Massive Particles (WIMPs) and introduce the Bayesian fitting procedure to the theoretically predicted velocity distribution functions. In this reconstruction process, the (rough) velocity distribution reconstructed by using raw data from direct Dark Matter detection experiments directly, i.e. measured recoil energies, with one or more different target materials, has been used as ''reconstructed-input'' information. By assuming a fitting velocity distribution function and scanning the parameter space based on the Bayesian analysis, the astronomical characteristic parameters, e.g. the Solar and Earth's Galactic velocities, will be pinned down as the output results.

79 ASTRONOMY AND ASTROPHYSICS↗

STEADY STATE DUST DISTRIBUTIONS IN DISK VORTICES: OBSERVATIONAL PREDICTIONS AND APPLICATIONS TO TRANSITIONAL DISKS

The Atacama Large Millimeter Array has returned images of transitional disks in which large asymmetries are seen in the distribution of millimeter sized dust in the outer disk. The explanation in vogue borrows from the vortex literature and suggests that these asymmetries are the result of dust trapping in giant vortices, excited via Rossby wave instabilities at planetary gap edges. Due to the drag force, dust trapped in vortices will accumulate in the center and diffusion is needed to maintain a steady state over the lifetime of the disk. While previous work derived semi-analytical models of the process, in this paper we provide analytical steady-steady solutions. Exact solutions exist for certain vortex models. The solution is determined by the vortex rotation profile, the gas scale height, the vortex aspect ratio, and the ratio of dust diffusion to gas-dust friction. In principle, all of these quantities can be derived from observations, which would validate the model and also provide constrains on the strength of the turbulence inside the vortex core. Based on our solution, we derive quantities such as the gas-dust contrast, the trapped dust mass, and the dust contrast at the same orbital location. We apply our model to the recently imaged Oph IRS 48 system, finding values within the range of the observational uncertainties.

79 ASTRONOMY AND ASTROPHYSICS↗

A SIMPLE METHOD FOR MODELING COLLISION PROCESSES IN PLASMAS WITH A KAPPA ENERGY DISTRIBUTION

We demonstrate that a nonthermal distribution of particles described by a kappa distribution can be accurately approximated by a weighted sum of Maxwell–Boltzmann distributions. We apply this method to modeling collision processes in kappa-distribution plasmas, with a particular focus on atomic processes important for solar physics. The relevant collision process rate coefficients are generated by summing appropriately weighted Maxwellian rate coefficients. This method reproduces the rate coefficients for a kappa distribution to an estimated accuracy of better than 3%. This is equal to or better than the accuracy of rate coefficients generated using “reverse-engineering” methods, which attempt to extract the needed cross sections from the published Maxwellian rate coefficient data and then reconvolve the extracted cross sections with the desired kappa distribution. Our approach of summing Maxwellian rate coefficients is easy to implement using existing spectral analysis software. Moreover, the weights in the sum of the Maxwell–Boltzmann distribution rate coefficients can be found for any value of the parameter κ, thereby enabling one to model plasmas with a time-varying κ. Tabulated Maxwellian fitting parameters are given for specific values of κ from 1.7 to 100. We also provide polynomial fits to these parameters over this entire range. Several applications of our technique are presented, including the plasma equilibrium charge state distribution (CSD), predicting line ratios, modeling the influence of electron impact multiple ionization on the equilibrium CSD of kappa-distribution plasmas, and calculating the time-varying CSD of plasmas during a solar flare.

79 ASTRONOMY AND ASTROPHYSICS↗

Broadband Inlet Liner Design for the DGEN Aero-Propulsion Research Turbofan

The utilization of advanced fan designs (including higher bypass ratios) and shorter engine nacelles has highlighted a need for increased fan noise reduction over a broad frequency range. With these observations in mind, an acoustic liner optimization process has been developed to achieve improved broadband liner designs. A series of advanced liner design studies at increasing technology readiness levels has been conducted as the overall optimization methodology has been enhanced. In this work, further validation was pursued through the fabrication and testing of two liner designs for the NASA Glenn DGEN Aero-propulsion Research Turbofan. Specifically, single and three layer liners were designed, fabricated, and tested. Analysis of the predicted attenuation results showed them to generally match expected trends for the conditions considered. The effects of source distribution on predicted directivity were also illustrated through the flexibility of a statistical source model. As part of the analysis, the overall design and evaluation capability was extended such that external observer locations may be included in the optimization process. This enhancement will provide a much wider design space for the development of advanced broadband liners. These preliminary results provide further confidence in the design tools and enhancements made to the overall liner design process.

Nark, Douglas M.↗

MPC4CLR (Model-Predictive-Control-for-Critical-Load-Restoration-in-Power-Distribution-Systems) [SWR-22-24]

Model predictive control (MPC) is a system or process control technique for making decisions under uncertainty via rolling look-ahead optimizations at each control step where only the current step decisions are applied, and the rest are discarded. In this work, we developed an MPC for a critical load restoration (CLR) in power distribution systems to recover system service (electricity delivery) following an extreme event-triggered substation outage. The method considers the problem of controlling distributed energy resources (DERs) of the distribution system with the objective of achieving maximum load pick up while satisfying distribution network flow and voltage constraints. A linearized optimal power flow (OPF) model is employed to represent the physics of the network. The problem formulation is augmented with a ramping (up) reserve product for the DERs to ensure improved and upward monotonic load restoration as time evolves. Simulation analysis and performance tests are performed using a modified IEEE 13-bus test feeder integrated with wind, solar, microturbine, and energy storage battery. The software is developed using various software packages in Julia and Python. The MPC model is implemented using the JuMP optimization language in Julia while the data analytics including renewable generation and load demand forecasts, running the MPC simulation and visualizations is performed in Python.

Eseye, Abinet Tesfaye↗

TRACING THE HERCULES STREAM AROUND THE GALAXY

It has been proposed that the Hercules stream, a group of co-moving stars in the solar neighborhood offset from the bulk of the velocity distribution, is the result of resonant interactions between stars in the outer disk and the Galactic bar. So far it has only been seen in the immediate solar neighborhood, but the resonance model makes a prediction over a large fraction of the Galactic disk. I predict the distribution of stellar velocities and the changing Hercules feature in this distribution as a function of location in the Galactic disk in a simple model for the Galaxy and the bar that produces the observed Hercules stream. The Hercules feature is expected to be strong enough to be unambiguously detected in the distribution of line-of-sight velocities in selected directions. I identify quantitatively the most promising lines of sight for detection in line-of-sight velocities using the Kullback-Leibler divergence between the predictions of the resonance model and an axisymmetric model; these directions are at 250{sup 0} {approx}< l {approx}< 290{sup 0}. The predictions presented here are only weakly affected by distance uncertainties, assumptions about the distribution function in the stellar disk, and the details of the Galactic potential including the effect of spiral structure. Gaia and future spectroscopic surveys of the Galactic disk such as APOGEE and HERMES will be able to robustly test the origin of the Hercules stream and constrain the properties of the Galactic bar.

79 ASTRONOMY AND ASTROPHYSICS↗

A Numerical Analysis of Heat Transfer and Effectiveness on Film Cooled Turbine Blade Tip Models

A computational study has been performed to predict the distribution of convective heat transfer coefficient on a simulated blade tip with cooling holes. The purpose of the examination was to assess the ability of a three-dimensional Reynolds-averaged Navier-Stokes solver to predict the rate of tip heat transfer and the distribution of cooling effectiveness. To this end, the simulation of tip clearance flow with blowing of Kim and Metzger was used. The agreement of the computed effectiveness with the data was quite good. The agreement with the heat transfer coefficient was not as good but improved away from the cooling holes. Numerical flow visualization showed that the uniformity of wetting of the surface by the film cooling jet is helped by the reverse flow due to edge separation of the main flow.

Ameri, A. A.↗

A search for correlation of ultra-high energy cosmic rays with IRAS-PSCz and 2MASS-6dF galaxies

We study the arrival directions of 69 ultra-high energy cosmic rays (UHECRs) observed at the Pierre Auger Observatory (PAO) with energies exceeding 55 EeV. We investigate whether the UHECRs exhibit the anisotropy signal expected if the primary particles are protons that originate in galaxies in the local universe, or in sources correlated with these galaxies. We cross-correlate the UHECR arrival directions with the positions of IRAS-PSCz and 2MASS-6dF galaxies taking into account particle energy losses during propagation. This is the first time that the 6dF survey is used in a search for the sources of UHECRs and the first time that the PSCz survey is used with the full 69 PAO events. The observed cross-correlation signal is larger for the PAO UHECRs than for 94% (98%) of realisations from an isotropic distribution when cross-correlated with the PSCz (6dF). On the other hand the observed cross-correlation signal is lower than that expected from ∼>85% of realisations, had the UHECRs originated in galaxies in either survey. The observed cross-correlation signal does exceed that expected by 50% of the realisations if the UHECRs are randomly deflected by intervening magnetic fields by 5° or more. We propose a new method of analysing the expected anisotropy signal, by dividing the predicted UHECR source distribution into equal predicted flux radial shells, which can help localise and constrain the properties of UHECR sources. We find that the 69 PAO events are consistent with isotropy in the nearest of three shells we define, whereas there is weak evidence for correlation with the predicted source distribution in the two more distant shells in which the galaxy distribution is less anisotropic.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling of irradiation hardening of iron after low–dose and low–temperature neutron irradiation

Irradiation hardening is a prominent low-temperature degradation phenomena in materials, and is characterized both by an irradiation-induced increase in yield strength along with the loss of ductility. In this paper, a reaction–diffusion cluster dynamics model is used to predict the distribution of vacancy and interstitial clusters in iron following low-temperature (<373 K) and low-dose (<0.1 dpa) neutron irradiation. The predicted microstructure evolutions of high-purity iron samples are compared to published experimental data (positron annihilation spectroscopy and transmission electron microscopy) and show good agreement for neutron irradiation in this regime. The defect cluster distributions are then coupled to a dispersed barrier hardening model that assumes a strength factor, α, which varies with cluster type and size to compute the yield strength increase; the results of which agree reasonably well with tensile tests performed in previous studies. Furthermore, the modeling results presented here compare quite well to the experimental observations in the low-dose regime, and provide insight into the underlying microstructure–property relationships and the need for spatially dependent modeling to accurately predict the saturation behavior of yield strength changes observed experimentally at higher dose levels.

36 MATERIALS SCIENCE↗