SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
One dimensional, discrete ordinates transport technique for use with nuclear rocket shielding methods, modification, updating, and data input preparation - Vol. 4
Two dimensional, discrete ordinates transport technique for use with nuclear rocket shielding methods, modification, updating, and data input preparation - Vol. 5
The primary objective of this effort was to develop a method for suppressing convective flows during the growth of mercurous chloride crystals by vapor transport in closed tubes to levels approaching those obtained in the microgravity environment. Mercurous chloride was chosen because it is a technologically interesting acoustical optical material whose optical properties are believed to be affected by convective flows. Since the Grashof number scales as the cube of the smallest dimension in the flow system, reduction of the size scale can be extremely effective in reducing unwanted convective flows. However, since materials of practical interest must be grown at least on the cm scale, reduction of the overall growth system is not feasible. But if the region just above the growing crystal could be restricted to a few mm, considerable reduction in flow velocity would result. By suspending an effusive barrier in the growth ampoule just above the growth interface, it should be possible to reduce the convective velocity in this vicinity to levels approaching flows in microgravity. If successful, this growth technique will offer a screening test for proposed space experiments that involve vapor transport to see if reduction of convection will result in improved material and will set a new standard against which the improvements obtained in microgravity may be judged. In addition, it may provide an improved method for preparing materials on Earth whose growth is affected adversely by convection. If the properties of this material can be improved there is a potential commercial interest from Brimrose Inc., who has agreed to fabricate and test devices from the crystals we have grown. This report describes the development of the growth facility, the purification processes developed for preparing the starting material, and the results from growth experiments with and without the effusive baffle. Mercurous chloride turned out to be a more difficult material to deal with than originally anticipated. At growth temperatures, it is extremely sensitive to practically any impurity which causes it to form oxychlorides and/or to decompose into elemental mercury and bichloride of mercury. We were unable to find a suitable method for protecting the magnetic material used to suspend the effusion barrier from the attack of mercurous chloride vapor. Although we were successful in growing single crystals of mercurous chloride without the effusion baffle, they exhibited severe microcracking which we attribute to wall-induced thermal stresses. This leads us to believe that uncontrolled convection may not be the most important problem in the development of this material and a new growth process was attempted that eliminates the wall-induced stress. Unfortunately, the grant ran out before this new method could be adequately tested.
Methods of making a Ce0.6Zr0.4O2 supported NiMg catalyst extrudate are provided. In some aspects, the methods include preparing a ceria-zirconia solution comprising Ce(NO3)3.6H2O, ZrO(NO3)2xH2O, and water; forming a precipitate; drying and calcining the precipitate to produce a Ce0.6Zr0.4O2; adding a nickel-magnesium solution to the Ce0.6Zr0.4O2 to produce the NiMg/Ce0.6Zr0.4O2; and drying and calcining a wet extrudate of the NiMg/Ce0.6Zr0.4O2 to produce the Ce0.6Zr0.4O2 supported NiMg catalyst extrudate. Ce0.6Zr0.4O2 supported NiMg catalyst extrudates made by the methods are also provided.
Abstract Using microwave irradiation, PtCo alloy nanoparticles were deposited within a few minutes on COOH‐functionalized MWCNT supports. The obtained catalysts were used for selective hydrogenation of cinnamaldehyde, a reaction whose products are widely used in various fields. In the selective cinnamaldehyde hydrogenation to cinnamyl alcohol, microwave‐prepared catalysts (generically, Pt x Co y ‐MW) outperformed a catalyst prepared by the conventional method (Pt 1 Co 2 ‐con). The highest selective hydrogenation to cinnamyl alcohol, 89%, was obtained using Pt 1 Co 2 ‐MW, while Pt 1 Co 2 ‐con showed a selectivity of 76%. Characterization results confirmed that the microwave prepared samples had a stronger interaction between Pt and Co than that in the Pt 1 Co 2 ‐con sample. The alloyed Co altered the electronic structure of Pt, leading to favorable adsorption of the C=O bond by the lone‐pair electrons of its oxygen atom. Moreover, the Pt 1 Co 2 ‐MW sample showed neglectable change in catalytic performance (e. g., cinnamaldehyde conversion and selective hydrogenation to cinnamyl alcohol) during recycling experiments.
Pressurized water treatments were investigated as a means to prevent cracking of internal gelation sol-gel microspheres upon drying and heating. A batch of gelled cerium oxide microspheres was prepared, split into two samples that were processed with and without a pressurized water treatment, and dried in air at room temperature. Thermal gravimetric analysis was used to compare the mass loss profiles between the two samples and to understand volatile emissions from cerium oxide microspheres during heat treatments up to 600 °C. Microspheres that were processed without a pressurized water treatment lost approximately 4.6 times more mass upon heating than microspheres that were subjected to a pressurized water treatment. Comparison of the cracking behavior of microspheres prepared with and without a pressurized water treatment indicated that microspheres subjected to a pressurized water treatment were virtually crack-free after heat treatments. Conversely, microspheres processed without a pressurized water treatment, which is typical of traditional washing processes, exhibited extensive cracking. Analysis of residues dried from pressurized water treatment effluents indicated that hexamethylenetetramine and urea, which are excess reactants from the internal gelation process, were removed from gelled microspheres during the pressurized water treatment step. Traditional processing methods for preparing internal gelation microspheres use specific feed solution and gelation parameters to reduce subsequent cracking upon drying and heating. Results from this study indicate that more aggressive gel-forming conditions may be used to produce crack-free microspheres, if a pressurized water treatment step is included after washing and before air-drying.
The small-size solid-state electrodes (SSEs) with high Li+ conductivity play an important role in reducing the interfacial resistance between electrode materials and SSEs and defects between SSEs. As one of the most conductive sulfide based ionic conductors, scalable synthesis of Li7P3S11 with controllable particle sizes is highly desired but rarely reported. Here, we report a facile wet-chemical synthesis method to prepare Li7P3S11 SSEs with variable sizes for all-solid-state lithium batteries (ASSLBs). By fully dissolving 70Li2S-30P2S5 precursors in ethyl acetate solution, the particle size of Li7P3S11 can be manipulated into as small as ~110 nm and high Li+ conductivity of 1.05 mS cm-1 can be achieved. A systematical mechanistic study of solvent effects suggests that the controlled particle sizes are attributed to the excellent solvability and low binding energy of ethyl acetate solvent toward solutes. Moreover, this generic method can be extended to the facilely synthesis of Li3PS4 nanoparticles with an average size of ~200 nm and high Li+ conductivity of 0.1 mS cm-1.
Various kinds of amorphous materials, such as transition metal dichalcogenides, metal oxides, and metal phosphates, have demonstrated superior electrocatalytic performance compared with their crystalline counterparts. Compared to other materials for electrocatalysis, noble metals exhibit intrinsically high activity and excellent durability. However, it is still very challenging to prepare amorphous noble-metal nanomaterials due to the strong interatomic metallic bonding. Herein, the discovery of a unique thiol molecule is reported, namely bismuthiol I, which can induce the transformation of Pd nanomaterials from face-centered-cubic (fcc) phase into amorphous phase without destroying their integrity. This ligand-induced amorphization is realized by post-synthetic ligand exchange under ambient conditions, and is applicable to fcc Pd nanomaterials with different capping ligands. Importantly, the obtained amorphous Pd nanoparticles exhibit remarkably enhanced activity and excellent stability toward electrocatalytic hydrogen evolution in acidic solution. This work provides a facile and effective method for preparing amorphous Pd nanomaterials, and demonstrates their promising electrocatalytic application.
A rarefied piezometric uptake apparatus and method for measuring gaseous uptake for large solid samples with little or no sample preparation. Past systems and methods require extensive sample preparation. The method includes providing a rarefied piezometric uptake apparatus having a dosing chamber and uptake chamber in an improved selective fluid communication. The apparatus and method improve the measurement of gaseous uptake into solid samples resulting in improved prediction of gas migration through solid samples such as geologic formations.
Aluminoborosilicate powders high in alumina content were synthesized by the sol-gel process utilizing various methods of preparation. Properties and microstructural effects related to these syntheses were examined. After heating to 600 C for 2 h in flowing air, the powders were amorphous with the metal oxides comprising 87 percent of the weight and uncombusted organics the remainder. DTA of dried powders revealed a T(sub g) at approximately 835 C and an exotherm near 900 C due to crystallization. Powders derived from aluminum secbutoxide consisted of particles with a mean diameter 5 microns less than those from aluminum isopropoxide. Powders synthesized with aluminum isopropoxide produced agglomerates comprised of rod shaped particulates while powders made with the secbutoxide precursor produced irregular glassy shards. Compacts formed from these powders required different loadings for equivalent densities according to the method of synthesis.
Short porous ceramic tubes in small quantities are needed for membrane-related research and development efforts and can be synthesized by centrifugal casting (CC) or cold isostatic pressing (CIP) methods. Here, this work evaluates the characteristics of porous ceramic tubes prepared by both methods and provides a strategy for selecting the proper method for ceramic tube fabrication, depending on its application. Samarium-doped ceria (SDC) with an average crystallite size of 10 nm was synthesized by a citrate method and used to make porous SDC tubes by the CC and CIP methods under different conditions. Porous SDC tubes were prepared from an aqueous suspension of the SDC powder with polyvinyl alcohol (PVA) using a cylindrical metallic mold, centrifugated at 4000–6000 rpm, followed by sintering in 1200–1500 °C. SDC tubes were also made by the CIP method from the SDC powder placed inside a cylindrical rubber bag followed by isostatic compression at 1379 bar. The pore structure of the SDC tubes was characterized by helium permeation and liquid nitrogen Archimedes method. Due to high compression pressure giving a low porosity green tube, the CIP method with lower sintering temperature produces SDC tubes with much lower porosity and average pore size and similar tortuosity compared to the CC methods. The CIP method should be used to prepare low porosity or dense ceramic tubes, and the CC method should be used for preparing high-porosity ceramic tubes or tubes with pore gradient tube wall.
Hydrogen bronzes can be used as hydrogen donors for the broad class of reactions involving proton-coupled electron transfer (PCET). Here, in this work, we describe a method to prepare platinum-decorated hydrogen tungsten bronzes, Pt@H x WO 3 · n H 2 O with n = 0, 1, and 2, by reacting the pristine oxides at modest temperatures with a mild reducing agent, H 3 PO 2 , and H 2 PtCl 6 in an aqueous solution. We explored the tunability and kinetics of this reaction and compared it with that of archetypal gas–solid hydrogen spillover. We demonstrate that the identity of the noble metal affects the extent of bronze reduction. This suggests that the mechanism proceeds via the adsorption of a hydrogen-atom species on the noble metal. Finally, we explored the ability of the Pt-decorated hydrogen tungsten bronzes to hydrogenate a model H + /e – acceptor, 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO). The bronze phases return to their fully oxidized states along with the subsequent reduction of TEMPO to TEMPOH. Overall, this work demonstrates a solution-phase method to obtain hydrogen bronzes, which can then be used to perform hydrogen transfer reactions, providing a pathway for the use of extended transition metal oxides as stoichiometric reagents for broad classes of hydrogenation reactions.
For this study, we used the conventional solid-state reaction method to prepare stoichiometric samples of CrTe 1-x Se x , where 0 ≤ x ≤ 0.10, and investigated the structural and critical behavior of the prepared samples. Room temperature powder X-ray diffraction, along with Rietveld refinement, revealed the emergence of the NiAs structure with P6 3 /mmc (194) space group with increasing Se substitution. The high-temperature linear fit to inverse of the dc-susceptibility versus temperature for the mother sample resulted in an effective moment of 3.65μ B Cr with Curie-Weiss temperature near 335K, which is slightly higher than the Tc of ~332K obtained from the inflection point of magnetization versus temperature. Magnetization isotherms were employed to investigate the critical behavior of ferromagnetic CrTe 1-x Se x with 0.0 ≤ x ≤ 0.10 near their Curie temperatures (Tc). The magnetic behavior near Tc was found to follow 3D mean-field critical exponents with a second-order phase transition in all samples investigated. We fine-tuned the critical exponents (β, γ, and δ) using a combination of an iteration technique, the Kouvel-Fisher method, and modified Arrott plots. All samples follow a mean field behavior, with Tc ranging from 298 to 340K. The acquired values exhibit self-consistency, as indicated by the results from the Widom scaling relation. Furthermore, the magnetization isotherms exhibit a universal scaling behavior, providing additional credence to the calculated critical exponents.
Water crystallization into hexagonal ice (type I h ) is one of the most critical processes relevant to the Earth’s environment and human activities. However, despite recent breakthroughs in imaging non-equilibrium condensed ice structures, the ice-water interface has never been imaged at a molecular resolution. This is primarily due to the low stability of the hydrogen bonds in ice under high-resolution microscopy conditions and a lack of methods to prepare compatible samples. Here, this presentation describes the first molecular-resolution imaging of ice crystallized from liquid water and the ice-water interface using high-resolution transmission electron microscopy (HRTEM). By encapsulating deionized (DI) water between two amorphous carbon (a-C) TEM grids and subsequently freezing it with liquid N 2 on a cryo sample stage, we generated two types of ice: non-equilibrium, condensed ice from the atmosphere and encapsulated ice from the DI water (Fig. 1A). Condensed ice usually shows irregular, spherulitic shapes (Fig. 1B). Selected area electron diffraction (SAED) shows that they are a mixture of cubic and hexagonal crystals (Fig. 1C). On the contrary, encapsulated ice forms thin films that contain large-area single-crystalline regions of hexagonal ice oriented along the [0001] zone axis (Fig. 1D). Differential electron energy-loss spectroscopy (EELS) confirmed the high purity of the encapsulated ice free from organic contaminations that are common in other encapsulation methods for HRTEM such as graphene liquid cells. These single-crystalline areas are robust under the electron beam up to ~100 e/Å 2 s. Aberration-corrected HRTEM imaging in these areas achieved a line resolution of ~1.3 Å (Fig. 1E and F). This platform allows us to study near-equilibrium ice structures and dynamics at an unprecedented spatial resolution (Fig. 2). For example, we discovered subdomain-rich regions near the defective crystal edges despite the structure appearing single-crystalline according to diffraction criteria. These subdomains connect via low-angle grain boundaries with flat energy landscapes as a function of tilt angles (according to simulations), showing the high tolerance of ice to defect structures. When we tuned the sample temperature and electron flux rate, we observed radiolysis-controlled bubble generation and dissolution in ice single crystals near a steady state of bubble dynamics. Furthermore, rich beam-induced melting and recrystallization dynamics were observed at the ice-water interface with lattice resolution. These data represent the first observation of the ice-water phase transformation at the sub-nanometer level. In summary, the methods developed in this work enabled molecular-resolution observations of ice and the ice-water interface and shed light on the microstructures and phase transformation pathways. Finer control on the temperature, electron irradiation profile, and imaging detector could eventually lead to real-time observation of ice nucleation in water and address long-standing questions in the nucleation pathways.
Compilation of neutron and photon cross section data using computer programs developed for nuclear rocket shielding methods, modification, updating, and input data preparation - Vol. 2
Surface-modified nanoparticles of boehmite, and methods for preparing the same. Aluminum oxyhydroxide nanoparticles are surface modified by reaction with selected amounts of organic acids. In particular, the nanoparticle surface is modified by reactions with two or more different carboxylic acids, at least one of which is an organic carboxylic acid. The product is a surface modified boehmite nanoparticle that has an inorganic aluminum oxyhydroxide core, or part aluminum oxyhydroxide core and a surface-bonded organic shell. Organic carboxylic acids of this invention contain at least one carboxylic acid group and one carbon-hydrogen bond. One embodiment of this invention provides boehmite nanoparticles that have been surface modified with two or more acids one of which additional carries at least one reactive functional group. Another embodiment of this invention provides boehmite nanoparticles that have been surface modified with multiple acids one of which has molecular weight or average molecular weight greater than or equal to 500 Daltons. Yet, another embodiment of this invention provides boehmite nanoparticles that are surface modified with two or more acids one of which is hydrophobic in nature and has solubility in water of less than 15 by weight. The products of the methods of this invention have specific useful properties when used in mixture with liquids, as filler in solids, or as stand-alone entities.
Li + /Na + exchange has been extensively explored as an effective method to prepare high-performance Mn-based layered cathodes for Li-ion batteries, since the first report in 1996 by P. G. Bruce (Nature, 1996. 381, 499–500). Understanding the detailed structural changes during the ion-exchange process is crucial to implement the synthetic control of high-performance layered Mn-based cathodes, but less studied. Herein, in situ synchrotron X-ray diffraction, density functional theory calculations, and electrochemical tests are combined to conduct the systemic studies into the structural changes during the ion-exchange process of an Mn-only layered cathode O3-type Li 0.67 [Li 0.22 Mn 0.78 ]O 2 (LLMO) from the corresponding counterpart P3-type Na 0.67 [Li 0.22 Mn 0.78 ]O 2 (NLMO). The temperature-resolved observations combined with theoretical calculations reveal that the Li + /Na + exchange is favorable thermodynamically and composited with two tandem topotactic phase transitions: 1) from NLMO to a layered intermediate through ≈60% of Li + /Na + exchange. 2) then to the final layered product LLMO through further Li insertion. Moreover, the intermediate-dominate composite is obtained by slowing down the exchange kinetics below room temperature, showing better electrochemical performance than LLMO obtained by the traditional molten-salt method. Finally, the findings provide guides for the synthetic control of high-performance Mn-based cathodes under mild conditions.