Search NASA⌕ Search

SEARCH · Search NASA

Results for “propulsion ion thruster”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Electric propulsion options for the SP-100 reference mission

Analyses were performed to characterize and compare electric propulsion systems for use on a space flight demonstration of the SP-100 nuclear power system. The component masses of resistojet, arcjet, and ion thruster systems were calculated using consistent assumptions and the maximum total impulse, velocity increment, and thrusting time were determined, subject to the constraint of the lift capability of a single Space Shuttle launch. From the study it was found that for most systems the propulsion system dry mass was less than 20 percent of the available mass for the propulsion system. The maximum velocity increment was found to be up to 2890 m/sec for resistojet, 3760 m/sec for arcjet, and 23 000 m/sec for ion thruster systems. The maximum thruster time was found to be 19, 47, and 853 days for resistojet, arcjet, and ion thruster systems, respectively.

Hardy, T. L.↗
NASA NTRS1987

Auxiliary propulsion system flight package

Hughes Aircraft Company developed qualified and integrated flight, a flight test Ion Auxiliary Propulsion System (IAPS), on an Air Force technology satellite. The IAPS Flight Package consists of two identical Thruster Subsystems and a Diagnostic Subsystem. Each thruster subsystem (TSS) is comprised of an 8-cm ion Thruster-Gimbal-Beam Shield Unit (TGBSU); Power Electronics Unit; Digital Controller and Interface Unit (DCIU); and Propellant Tank, Valve and Feed Unit (PTVFU) plus the requisite cables. The Diagnostic Subsystem (DSS) includes four types of sensors for measuring the effect of the ion thrusters on the spacecraft and the surrounding plasma. Flight qualifications of IAPS, prior to installation on the spacecraft, consisted of performance, vibration and thermal-vacuum testing at the unit level, and thermal-vacuum testing at the subsystem level. Mutual compatibility between IAPS and the host spacecraft was demonstrated during a series of performance and environmental tests after the IAPS Flight Package was installed on the spacecraft. After a spacecraft acoustic test, performance of the ion thrusters was reverified by removing the TGBSUs for a thorough performance test at Hughes Research Laboratories (HRL). The TGBSUs were then reinstalled on the spacecraft. The IAPS Flight Package is ready for flight testing when Shuttle flights are resumed.

Collett, C. R.↗
NASA NTRS2003

An overview of the Nuclear Electric Xenon Ion System (NEXIS) program

NASA is investigating high power, high specific impulse propulsion technologies that could enable ambitious flights such as multi-body rendezvous missions, outer planet orbiters and interstellar precursor missions. The requirements for these missions are much more demanding than those for state-of-the-art solar-powered ion propulsion applications. The purpose of the NEXIS program is to develop advanced ion thruster technologies that satisfy the requirements for high power, high specific impulse operation, high efficiency and long thruster life. The nominal design point for the NEXIS thruster is 20 kWe at a specific impulse of 7500 s with an efficiency over 78% and a xenon throughput capability of greater than 2000 kg. These performance and throughput goals will be achieved by applying a combination of advanced technologies including a large discharge chamber, erosion resistant carbon-carbon grids, an advanced reservoir hollow cathode and techniques for increasing propellant efficiency such as grid masking and accelerator grid aperture diameter tailoring. This paper provides an overview of the challenges associated with these requirements and how they are being addressed in the NEXIS program.

carbon-carbon grids↗
NASA NTRS1977

Extended performance electric propulsion power processor design study. Volume 2: Technical summary

Electric propulsion power processor technology has processed during the past decade to the point that it is considered ready for application. Several power processor design concepts were evaluated and compared. Emphasis was placed on a 30 cm ion thruster power processor with a beam power rating supply of 2.2KW to 10KW for the main propulsion power stage. Extension in power processor performance were defined and were designed in sufficient detail to determine efficiency, component weight, part count, reliability and thermal control. A detail design was performed on a microprocessor as the thyristor power processor controller. A reliability analysis was performed to evaluate the effect of the control electronics redesign. Preliminary electrical design, mechanical design and thermal analysis were performed on a 6KW power transformer for the beam supply. Bi-Mod mechanical, structural and thermal control configurations were evaluated for the power processor and preliminary estimates of mechanical weight were determined.

Biess, J. J.↗
NASA NTRS1984

Performance capabilities of the 12-centimeter Xenon ion thruster

The 8- and 12-cm mercury ion thruster systems were developed primarily to provide N-S station keeping of satellites with masses up to about 1800 to 3600 kg respectively. The on-orbit propulsion requirements of recently proposed Large Space Systems (LSS) are beyond the thrust capabilities of the baseline 8- and 12-cm thruster systems. This paper presents a characterization of the performance capabilities of the 12-cm Xenon ion thruster to enable an evaluation of its application to LSS auxiliary propulsion requirements. With minor thruster modifications and simplifications the thrust was increased to 64 mN, a factor of six over the baseline 12-cm mercury thruster performance. The thruster was operated over a range of specific impulse of about 2000 to 4000 seconds and at total efficiencies up to 68.0 percent. The operating levels reached in this study were found to be close to the operating limits of the thruster design in terms of perveance, grid breakdown voltage and thruster component temperatures such as those of the magnets and cathode baffle.

Mantenieks, M.↗
NASA NTRS1984

Performance capabilities of the 12-centimeter Xenon ion thruster

The 8- and 12-cm mercury ion thruster systems were developed primarily to provide N-S station keeping of satellites with masses up to about 1800 to 3600 kg respectively. The on-orbit propulsion requirements of recently proposed Large Space Systems (LSS) are beyond the thrust capabilities of the baseline 8- and 12-cm thruster systems. This paper presents a characterization of the performance capabilities of the 12-cm Xenon ion thruster to enable an evaluation of its application to LSS auxiliary propulsion requirements. With minor thruster modifications and simplifications the thrust was increased to 64 mN, a factor of six over the baseline 12-cm mercury thruster performance. The thruster was operated over a range of specific impulse of about 2000 to 4000 seconds and at total efficiencies up to 68.0 percent. The operating levels reached in this study were found to be close to the operating limits of the thruster design in terms of perveance, grid breakdown voltage and thruster component temperatures such as those of the magnets and cathode baffle.

Mantenieks, M.↗
NASA NTRS2019

Overview of Electric Propulsion Projects at NASA Glenn Research Center

NASA Glenn Research Center (GRC) is currently leading the development of multiple electric propulsion systems to flight readiness. The Advanced Electric Propulsion System is a 12.5 kW Hall thruster system that is being developed by the Solar Electric Propulsion Technology Demonstration Mission (SEP TDM) project, under the sponsorship of the Space Technology Mission Directorate. NASA's Evolutionary Xenon Thruster-Commercial (NEXT-C) is 7 kW class gridded ion thruster system that being developed under the sponsorship of the Science Mission Directorate. NASA GRC is also providing electric propulsion discipline support to the Power and Propulsion Element and the Double Asteroid Redirection Test (DART) missions, which will be the first applications for these technologies, respectively. Lower technology readiness level (TRL) projects are underway for applications including CubeSats, small spacecraft and Mars exploration vehicles. Under the sponsorship of the Small Spacecraft Technology Program, NASA GRC has performed numerous independent verification and validation tests of CubeSat class electric propulsion systems in support of a growing number of small US businesses that are developing these systems. Lastly, three technology development efforts focused on 100 kW EP strings led by Aerojet Rocketdyne, Ad Astra and MSNW were recently completed.

Smith, Bryan K.↗
NASA NTRS1977

A comparison of solar sail and ion drive trajectories for a Halley's comet rendezvous mission

According to the propulsion concept of solar sail spacecraft the thrust force is produced by the specular reflection of sunlight from a large, essentially flat, reflecting surface. The magnitude of this force is approximately 9 newtons for a perfectly reflecting sail with an area of 1 square kilometer oriented normal to the sunline at a distance of one astronomical unit from the sun. There exists a restriction in the types of orbit transfer trajectories which can be considered with this propulsion system. In the case of the second propulsion system being considered for the Halley's comet rendezvous mission, thrust is produced by the acceleration of ionized mercury atoms by an electric field. Power to the ion thrusters is supplied by lightweight solar arrays which can provide up to 100 kW of electrical power at a distance of 1 AU from the sun. Because of differing thrust constraints for the two propulsion systems, trajectories for a Halley's comet rendezvous mission are significantly different for the Ion Drive and Solar Sail spacecraft. Details concerning the trajectory characteristics are shown with the aid of a number of graphs.

Sauer, C. G., Jr.↗
NASA NTRS2011

MW-Class Electric Propulsion System Designs for Mars Cargo Transport

Multi-kilowatt electric propulsion systems are well developed and have been used on commercial and military satellites in Earth orbit for several years. Ion and Hall thrusters have also propelled robotic spacecraft to encounters with asteroids, the Moon, and minor planetary bodies within the solar system. High power electric propulsion systems are currently being considered to support piloted missions to near earth asteroids, as cargo transport for sustained lunar or Mars exploration, and for very high-power piloted missions to Mars and the outer planets. Using NASA Mars Design Architecture 5.0 as a reference, a preliminary parametric analysis was performed to determine the suitability of a nuclear powered, MW-class electric propulsion system for Mars cargo transport. For this initial analysis, high power 100-kW Hall thrusters and 250-kW VASIMR engines were separately evaluated to determine optimum vehicle architecture and estimated performance. The DRA 5.0 cargo mission closed for both propulsion options, delivering a 100 t payload to Mars orbit and reducing the number of heavy lift launch vehicles from five in the baseline DRA 5.0 architecture to two using electric propulsion. Under an imposed single engine-out mission success criteria, the VASIMR system took longer to reach Mars than did the Hall system, arising from the need to operate the VASIMR thrusters in pairs during the spiral out from low Earth orbit.

Gilland, James H.↗
NASA NTRS1984

Advanced solar electric propulsion (ASEP) for planetary missions

This paper defines an advanced SEP concept based upon demonstrated ion thruster technology improvements and projected improvements in solar array technology. The ASEP concept utilizes an 'integrated' rather than a 'stage' approach and assumes 30 cm Hg ion thrusters capable of operation near 7 kWe each. The mission performance using the ASEP system is presented for three missions: (1) Saturn orbiter, (2) comet rendezvous and (3) comet sample return. The ASEP system provides significant mission performance improvements. The simpler, fewer thruster ASEP system design may provide cost as well as performance benefits for the missions examined when compared to ballistic or SEP stage mission options.

Jones, R. M.↗
NASA NTRS1990

Multimegawatt electric propulsion system design considerations

Piloted Mars mission requirements of relatively short trip times and low initial mass in earth orbit as identified by the NASA Space Exploration Initiative, indicate the need for multimegawatt electric propulsion systems. The design considerations and results for two thruster types, the argon ion and hydrogen magnetoplasmadynamic thrusters, are addressed in terms of configuration, performance, and mass projections. Preliminary estimates of Power Management and Distribution for these systems are given. Some assessment of these systems' performance in a reference Space Exploration Initiative piloted mission are discussed. Research and development requirements of these systems are also described.

Gilland, J. H.↗
NASA NTRS1991

Multimegawatt electric propulsion system design considerations

Piloted Mars Mission Requirements of relatively short trip times and low initial mass in Earth orbit as identified by the NASA Space Exploration Initiative, indicate the need for multimegawatt electric propulsion systems. The design considerations and results for two thruster types, the argon ion, and hydrogen magnetoplasmadynamic thrusters, are addressed in terms of configuration, performance, and mass projections. Preliminary estimates of power management and distribution for these systems are given. Some assessment of these systems' performance in a reference Space Exploration Initiative piloted mission are discussed. Research and development requirements of these systems are also described.

Gilland, J. H.↗
NASA NTRS2003

Outer-Planet Mission Analysis Using Solar-Electric Ion Propulsion

Outer-planet mission analysis was performed using three next generation solar-electric ion thruster models. Optimal trajectories are presented that maximize the delivered mass to the designated outer planet. Trajectories to Saturn and Neptune with a single Venus gravity assist are investigated. For each thruster model, the delivered mass versus flight time curve was generated to obtain thruster model performance. The effects of power to the thrusters and resonance ratio of Venutian orbital periods to spacecraft period were also studied. Multiple locally optimal trajectories to Saturn and Neptune have been discovered in different regions of the parameter search space. The characteristics of each trajectory are noted.

Woo, Byoungsam↗
NASA NTRS2002

Ion thrusters and LFAs for outer planet exploration

Given the recent advancements in power generation, waste heat rejection systems and electric propulsion, a reassessment of the benefits of Nuclear Electric Propulsion (NEP) is provided.

advanced electric propulsion mission studies↗
NASA NTRS1983

Development of advanced inert-gas ion thrusters

Inert gas ion thruster technology offers the greatest potential for providing high specific impulse, low thrust, electric propulsion on large, Earth orbital spacecraft. The development of a thruster module that can be operated on xenon or argon propellant to produce 0.2 N of thrust at a specific impulse of 3000 sec with xenon propellant and at 6000 sec with argon propellant is described. The 30 cm diameter, laboratory model thruster is considered to be scalable to produce 0.5 N thrust. A high efficiency ring cusp discharge chamber was used to achieve an overall thruster efficiency of 77% with xenon propellant and 66% with argon propellant. Measurements were performed to identify ion production and loss processes and to define critical design criteria (at least on a preliminary basis).

Poeschel, R. L.↗
NASA NTRSDate not supplied

Phase-Free Orbital Element Model Designed to Enable Rapid Assessment of Eclipse and Radiation Profiles for Low-Thrust Spiral Transfers Around the Earth

The Gateway Power and Propulsion Element (PPE) will be the first low-thrust solar electric ion propulsion mission to transfer from a highly elliptical Earth-bound orbit to a southern near-rectilinear halo orbit (NRHO) at the Earth-Moon L2 point. Due to the low thrust nature of the transfer orbit, it is desirable to locate viable trajectories that minimize the time spent in the Van Allen radiation belts to reduce solar array degradation and keep radiation dosages below design limits. In addition to radiation, low thrust trajectories which spiral around the Earth will pass through at least one or more seasons of Earth eclipses. The solar electric propulsion system relies on sunlight to generate the power necessary to operate the ion thrusters. Therefore, it is advantageous to find trajectories which also minimize the amount of time spent in eclipse and avoid excessive battery draw-down periods. We present an analytical method which rapidly approximates low-thrust spiral trajectories, fit to high-fidelity simulated data and parameterized to allow for changes in vehicle thrust characteristics, that is post-processed to determine eclipse profiles and time spent in the belts using a novel approach that estimates the geometry of the belts using a first-order dipole approximation of the Earth’s magnetic field. This method can be used to find satisfactory launch dates and orbit orientations that can serve as initial guesses when optimizing such missions in high-fidelity software.

low thrust trajectory design↗
NASA NTRSDate not supplied

Phase-Free Orbital Element Model Designed to Enable Rapid Assessment of Eclipse and Radiation Profiles for Low-Thrust Spiral Transfers Around the Earth

The Gateway Power and Propulsion Element (PPE) will be the first low-thrust solar electric ion propulsion mission to transfer from a highly elliptical Earth-bound orbit to a southern near-rectilinear halo orbit (NRHO) at the Earth-Moon L2 point. Due to the low thrust nature of the transfer orbit, it is desirable to locate viable trajectories that minimize the time spent in the Van Allen radiation belts to reduce solar array degradation and keep radiation dosages below design limits. In addition to radiation, low thrust trajectories which spiral around the Earth will pass through at least one or more seasons of Earth eclipses. The solar electric propulsion system relies on sunlight to generate the power necessary to operate the ion thrusters. Therefore, it is advantageous to find trajectories which also minimize the amount of time spent in eclipse and avoid excessive battery draw-down periods. We present an analytical method which rapidly approximates low-thrust spiral trajectories, fit to high-fidelity simulated data and parameterized to allow for changes in vehicle thrust characteristics, that is post-processed to determine eclipse profiles and time spent in the belts using a novel approach that estimates the geometry of the belts using a first-order dipole approximation of the Earth’s magnetic field. This method can be used to find satisfactory launch dates and orbit orientations that can serve as initial guesses when optimizing such missions in high-fidelity software.

low thrust trajectory design↗