Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum distributed algorithms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Statistical behaviour of adaptive multilevel splitting algorithms in simple models

Adaptive multilevel splitting algorithms have been introduced rather recently for estimating tail distributions in a fast and efficient way. In particular, they can be used for computing the so-called reactive trajectories corresponding to direct transitions from one metastable state to another. The algorithm is based on successive selection–mutation steps performed on the system in a controlled way. It has two intrinsic parameters, the number of particles/trajectories and the reaction coordinate used for discriminating good or bad trajectories. We investigate first the convergence in law of the algorithm as a function of the timestep for several simple stochastic models. Second, we consider the average duration of reactive trajectories for which no theoretical predictions exist. The most important aspect of this work concerns some systems with two degrees of freedom. They are studied in detail as a function of the reaction coordinate in the asymptotic regime where the number of trajectories goes to infinity. We show that during phase transitions, the statistics of the algorithm deviate significatively from known theoretical results when using non-optimal reaction coordinates. In this case, the variance of the algorithm is peaking at the transition and the convergence of the algorithm can be much slower than the usual expected central limit behaviour. The duration of trajectories is affected as well. Moreover, reactive trajectories do not correspond to the most probable ones. Such behaviour disappears when using the optimal reaction coordinate called committor as predicted by the theory. We finally investigate a three-state Markov chain which reproduces this phenomenon and show logarithmic convergence of the trajectory durations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reconstruction of apparent orthotropic conductivity tensor image using magnetic resonance electrical impedance tomography

Magnetic resonance electrical impedance tomography visualizes current density and/or conductivity distributions inside an electrically conductive object. Injecting currents into the imaging object along at least two different directions, induced magnetic flux density data can be measured using a magnetic resonance imaging scanner. Without rotating the object inside the scanner, we can measure only one component of the magnetic flux density denoted as B{sub z}. Since the biological tissues such as skeletal muscle and brain white matter show strong anisotropic properties, the reconstruction of anisotropic conductivity tensor is indispensable for the accurate observations in the biological systems. In this paper, we propose a direct method to reconstruct an axial apparent orthotropic conductivity tensor by using multiple B{sub z} data subject to multiple injection currents. To investigate the anisotropic conductivity properties, we first recover the internal current density from the measured B{sub z} data. From the recovered internal current density and the curl-free condition of the electric field, we derive an over-determined matrix system for determining the internal absolute orthotropic conductivity tensor. The over-determined matrix system is designed to use a combination of two loops around each pixel. Numerical simulations and phantom experimental results demonstrate that the proposed algorithm stably determines the orthotropic conductivity tensor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Green's Function of the Dirac Equation with Complex Energy and Non-singular Central Nuclear Potential

We report the further development of an effective approach to construction of the electron Green's function (GF) for the Dirac equation with a complex energy and non-singular central nuclear potential. The nuclear charge distribution and the corresponding nuclear potential are received within the relativistic mean field (RMF) model. The Green's function is usually represented as a combination of two fundamental solutions of the Dirac equation. In the numerical procedure we use the Ivanov-Ivanova effective numerical algorithm and reduce a definition of the Dirac equation fundamental solutions to solving the system of differential equations, which includes the differential equations for the RMF nuclear potential too. As an application, we estimate the self-energy shift correction to atomic levels energies within the Mohr covariant procedure and presented GF approach and calculate the transitions energies for some heavy Li-like multi-charged ions within the QED many-body perturbation theory formalism.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mixed stochastic-deterministic density functional theoretic decomposition of Kubo–Greenwood conductivities in the projector augmented wave formalism

Pairing the accuracy of the Kohn–Sham density-functional framework with the efficiency of a stochastic algorithmic approach, mixed stochastic-deterministic density functional theory (mDFT) achieves a favorable computational scaling with system sizes and electronic temperatures. We employ the recently developed mDFT formalism to investigate the dynamic charge-transport properties of systems in the warm dense matter regime. The optical conductivity spectra are computed for single- and multi- component mixtures of carbon, hydrogen, and beryllium using two complementary approaches: Kubo–Greenwood in the mDFT picture and real-time time-dependent mDFT. We further devise a decomposition of the Onsager coefficients leading up to the Kubo–Greenwood spectra to exhibit contributions from the deterministic, stochastic, and mixed electronic state transitions at different incident photon energies.

36 MATERIALS SCIENCE↗

Measurement of $Z/\gamma^* + b$-jet Production Cross section in $p\bar{p}$ collisions at $\sqrt{s}= 1.96$ TeV with the CDF detector

Processes at hadron colliders, such as the production of jets, are described by the Quantum Chromodynamics theory (QCD). Precise descriptions of processes involving jets in association with a vector boson have nowadays large relevance as they represent irreducible background to other Standard Model (SM) processes and searches for new physics. The experimental study and understanding of the b-jet production in association with a Z boson are crucial for many reasons. For one side, it is the most important background for a light Higgs boson decaying into a bottom-antibottom quark pair and produced in the ZH mode.This is one of the most promising channels for the Higgs search at Tevatron in particular since the latest results have excluded the high mass region (MH > 127 GeV/c 2 ). For another side the signature of b-jets and a Z boson is also background to new physics searches, such as supersymmetry, where a large coupling of the Higgs boson to bottom quarks is allowed. The produ ction cross section measurement of b-jets in events with a Z boson has already been performed at hadron colliders, at the Tevatron by CDF and D0 experiments and are now pursued at the LHC by ATLAS and CMS. In particular the CDF measurement was performed with only 2 fb -1 and was limited by the statistical uncertainty. This PhD thesis presents a new measurement of the $Z/\gamma^* + b$-jet production cross section using the complete dataset collected by CDF during the Run II. $Z/\gamma^*$ bosons are selected in the electron and muon decay modes and are required to have 66 < MZ < 116 GeV/c 2 while jets, reconstructed with the MidPoint algorithm, have to be central (|Y| < 1.5) with pT > 20 GeV/c . The per jet cross section is measured with respect to the $Z/\gamma^*$ inclusive and the $Z/\gamma^* +$ jets cross sections. Results are compared to leading order (LO) event generator plus parton shower and next-to-leading order (NLO) predictions corrected for non perturbative effects such as hadronizat ion and underlying event. Differential distributions as a fu! nction of jet transverse moment and jet rapidity are also presented together with the comparison to NLO pQCD predictions for different renormalization and factorization scales and various PDF sets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fast equilibration protocol for million atom systems of highly entangled linear polyethylene chains

Equilibrated systems of entangled polymer melts cannot be produced using direct brute force equilibration due to the slow reptation dynamics exhibited by high molecular weight chains. Instead, these dense systems are produced using computational techniques such as Monte Carlo-Molecular Dynamics hybrid algorithms, though the use of soft potentials has also shown promise mainly for coarse-grained polymeric systems. Through the use of soft-potentials, the melt can be equilibrated via molecular dynamics at intermediate and long length scales prior to switching to a Lennard-Jones potential. We will outline two different equilibration protocols, which use various degrees of information to produce the starting configurations. In one protocol, we use only the equilibrium bond angle, bond length, and target density during the construction of the simulation cell, where the information is obtained from available experimental data and extracted from the force field without performing any prior simulation. In the second protocol, we moreover utilize the equilibrium radial distribution function and dihedral angle distribution. This information can be obtained from experimental data or from a simulation of short unentangled chains. Both methods can be used to prepare equilibrated and highly entangled systems, but the second protocol is much more computationally efficient. These systems can be strictly monodisperse or optionally polydisperse depending on the starting chain distribution. Our protocols, which utilize a soft-core harmonic potential, will be applied for the first time to equilibrate a million particle system of polyethylene chains consisting of 1000 united atoms at various temperatures. Calculations of structural and entanglement properties demonstrate that this method can be used as an alternative towards the generation of entangled equilibrium structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scalable posterior approximations for large-scale Bayesian inverse problems via likelihood-informed parameter and state reduction

Two prime bottlenecks to the solution of large-scale Bayesian inverse problems are the scaling of posterior sampling algorithms to high-dimensional parameter spaces and the computational cost of forward model evaluations. However, incomplete or noisy data, the state variation and parameter dependence of the forward model, and correlations in the prior collectively provide useful structure that can be exploited for dimension reduction in this setting—both in the parameter space of the inverse problem and in the state space of the forward model. To this end, we show how to jointly construct low-dimensional subspaces of the parameter space and the state space in order to accelerate the Bayesian solution of the inverse problem. As a byproduct of state dimension reduction, we also show how to identify low-dimensional subspaces of the data in problems with high-dimensional observations. These subspaces enable approximation of the posterior as a product of two factors: (i) a projection of the posterior onto a low-dimensional parameter subspace, wherein the original likelihood is replaced by an approximation involving a reduced model; and (ii) the marginal prior distribution on the high-dimensional complement of the parameter subspace. We introduce and compare several strategies for constructing these subspaces using only a limited number of forward and adjoint model simulations. The resulting posterior approximations can rapidly be characterized using standard sampling techniques, e.g., Markov chain Monte Carlo. Two numerical examples demonstrate the accuracy and efficiency of our approach: inversion of an integral equation in atmospheric remote sensing, where the data dimension is very high; and the inference of a heterogeneous transmissivity field in a groundwater system, which involves a partial differential equation forward model with high dimensional state and parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Operator learning for predicting multiscale bubble growth dynamics

We report simulating and predicting multiscale problems that couple multiple physics and dynamics across many orders of spatiotemporal scales is a great challenge that has not been investigated systematically by deep neural networks (DNNs). Herein, we develop a framework based on operator regression, the so-called deep operator network (DeepONet), with the long-term objective to simplify multiscale modeling by avoiding the fragile and time-consuming “hand-shaking” interface algorithms for stitching together heterogeneous descriptions of multiscale phenomena. To this end, as a first step, we investigate if a DeepONet can learn the dynamics of different scale regimes, one at the deterministic macroscale and the other at the stochastic microscale regime with inherent thermal fluctuations. Specifically, we test the effectiveness and accuracy of the DeepONet in predicting multirate bubble growth dynamics, which is described by a Rayleigh–Plesset (R–P) equation at the macroscale and modeled as a stochastic nucleation and cavitation process at the microscale by dissipative particle dynamics (DPD). First, we generate data using the R–P equation for multirate bubble growth dynamics caused by randomly time-varying liquid pressures drawn from Gaussian random fields (GRFs). Our results show that properly trained DeepONets can accurately predict the macroscale bubble growth dynamics and can outperform long short-term memory networks. We also demonstrate that the DeepONet can extrapolate accurately outside the input distribution using only very few new measurements. Subsequently, we train the DeepONet with DPD data corresponding to stochastic bubble growth dynamics. Although the DPD data are noisy and we only collect sparse data points on the trajectories, the trained DeepONet model is able to predict accurately the mean bubble dynamics for time-varying GRF pressures. Taken together, our findings demonstrate that DeepONets can be employed to unify the macroscale and microscale models of the multirate bubble growth problem, hence providing new insight into the role of operator regression via DNNs in tackling realistic multiscale problems and in simplifying modeling with heterogeneous descriptions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shadow molecular dynamics for flexible multipole models

Shadow molecular dynamics provide an efficient and stable atomistic simulation framework for flexible charge models with long-range electrostatic interactions. Shadow molecular dynamics simulations are driven by approximate “shadow” Born–Oppenheimer potentials for which the exact charges and forces are directly accessible without relying on costly (and approximate) iterative solvers. While previous implementations have been limited to atomic monopole charge distributions, we extend this approach to flexible multipole models. We derive detailed expressions for the shadow energy functions, potentials, and force terms, explicitly incorporating monopole–monopole, dipole–monopole, and dipole–dipole interactions. In our formulation, both atomic monopoles and atomic dipoles are treated as extended dynamical variables alongside the propagation of the nuclear degrees of freedom. We demonstrate that introducing the additional dipole degrees of freedom preserves the stability and accuracy previously seen in monopole-only shadow molecular dynamics simulations. In addition, we present a shadow molecular dynamics scheme where the monopole charges are held fixed while the dipoles remain flexible. Our extended shadow dynamics provide a framework for stable, computationally efficient, and versatile molecular dynamics simulations involving long-range interactions between flexible multipoles. This is of particular current interest in combination with machine-learned interatomic potentials, including long-range electrostatic interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generation of a suite of 3D computer-generated breast phantoms from a limited set of human subject data

Purpose: The authors previously reported on a three-dimensional computer-generated breast phantom, based on empirical human image data, including a realistic finite-element based compression model that was capable of simulating multimodality imaging data. The computerized breast phantoms are a hybrid of two phantom generation techniques, combining empirical breast CT (bCT) data with flexible computer graphics techniques. However, to date, these phantoms have been based on single human subjects. In this paper, the authors report on a new method to generate multiple phantoms, simulating additional subjects from the limited set of original dedicated breast CT data. The authors developed an image morphing technique to construct new phantoms by gradually transitioning between two human subject datasets, with the potential to generate hundreds of additional pseudoindependent phantoms from the limited bCT cases. The authors conducted a preliminary subjective assessment with a limited number of observers (n= 4) to illustrate how realistic the simulated images generated with the pseudoindependent phantoms appeared. Methods: Several mesh-based geometric transformations were developed to generate distorted breast datasets from the original human subject data. Segmented bCT data from two different human subjects were used as the 'base' and 'target' for morphing. Several combinations of transformations were applied to morph between the 'base' and 'target' datasets such as changing the breast shape, rotating the glandular data, and changing the distribution of the glandular tissue. Following the morphing, regions of skin and fat were assigned to the morphed dataset in order to appropriately assign mechanical properties during the compression simulation. The resulting morphed breast was compressed using a finite element algorithm and simulated mammograms were generated using techniques described previously. Sixty-two simulated mammograms, generated from morphing three human subject datasets, were used in a preliminary observer evaluation where four board certified breast radiologists with varying amounts of experience ranked the level of realism (from 1 ='fake' to 10 ='real') of the simulated images. Results: The morphing technique was able to successfully generate new and unique morphed datasets from the original human subject data. The radiologists evaluated the realism of simulated mammograms generated from the morphed and unmorphed human subject datasets and scored the realism with an average ranking of 5.87 {+-} 1.99, confirming that overall the phantom image datasets appeared more 'real' than 'fake.' Moreover, there was not a significant difference (p > 0.1) between the realism of the unmorphed datasets (6.0 {+-} 1.95) compared to the morphed datasets (5.86 {+-} 1.99). Three of the four observers had overall average rankings of 6.89 {+-} 0.89, 6.9 {+-} 1.24, 6.76 {+-} 1.22, whereas the fourth observer ranked them noticeably lower at 2.94 {+-} 0.7. Conclusions: This work presents a technique that can be used to generate a suite of realistic computerized breast phantoms from a limited number of human subjects. This suite of flexible breast phantoms can be used for multimodality imaging research to provide a known truth while concurrently producing realistic simulated imaging data.

60 APPLIED LIFE SCIENCES↗

Development of a fast and feasible spectrum modeling technique for flattening filter free beams

Purpose: To develop a fast and robust technique for the determination of optimized photon spectra for flattening filter free (FFF) beams to be applied in convolution/superposition dose calculations. Methods: A two-step optimization method was developed to derive optimal photon spectra for FFF beams. In the first step, a simple functional form of the photon spectra proposed by Ali ['Functional forms for photon spectra of clinical linacs,' Phys. Med. Biol. 57, 31-50 (2011)] is used to determine generalized shapes of the photon spectra. In this method, the photon spectra were defined for the ranges of field sizes to consider the variations of the contributions of scattered photons with field size. Percent depth doses (PDDs) for each field size were measured and calculated to define a cost function, and a collapsed cone convolution (CCC) algorithm was used to calculate the PDDs. In the second step, the generalized functional form of the photon spectra was fine-tuned in a process whereby the weights of photon fluence became the optimizing free parameters. A line search method was used for the optimization and first order derivatives with respect to the optimizing parameters were derived from the CCC algorithm to enhance the speed of the optimization. The derived photon spectra were evaluated, and the dose distributions using the optimized spectra were validated. Results: The optimal spectra demonstrate small variations with field size for the 6 MV FFF beam and relatively large variations for the 10 MV FFF beam. The mean energies of the optimized 6 MV FFF spectra were decreased from 1.31 MeV for a 3 Multiplication-Sign 3 cm{sup 2} field to 1.21 MeV for a 40 Multiplication-Sign 40 cm{sup 2} field, and from 2.33 MeV at 3 Multiplication-Sign 3 cm{sup 2} to 2.18 MeV at 40 Multiplication-Sign 40 cm{sup 2} for the 10 MV FFF beam. The developed method could significantly improve the agreement between the calculated and measured PDDs. Root mean square differences on the optimized PDDs were observed to be 0.41% (3 Multiplication-Sign 3 cm{sup 2}) down to 0.21% (40 Multiplication-Sign 40 cm{sup 2}) for the 6 MV FFF beam, and 0.35% (3 Multiplication-Sign 3 cm{sup 2}) down to 0.29% (40 Multiplication-Sign 40 cm{sup 2}) for the 10 MV FFF beam. The first order derivatives from the functional form were found to improve the speed of computational time up to 20 times compared to the other techniques. Conclusions: The derived photon spectra resulted in good agreements with measured PDDs over the range of field sizes investigated. The suggested method is easily applicable to commercial radiation treatment planning systems since it only requires measured PDDs as input.

60 APPLIED LIFE SCIENCES↗

The Metallicity Distribution Functions of SEGUE G and K dwarfs: Constraints for Disk Chemical Evolution and Formation

Using the G and K dwarfs from the Sloan Extension for Galactic Understanding and Exploration (SEGUE) survey, we determine the metallicity distributions of cool stars in the Milky Way disk system. This portion of the Sloan Digital Sky Survey (SDSS) contains spectra for approximately 41,500 G and 23,800 K dwarfs, a significantly larger sample, both numerically and spatially, than previous spectroscopic analyses. Comparison of these two spectral types, and their variation in metallicity with respect to Galactic position, provides important guidance for models of the formation and chemical evolution of the Milky Way's thick-disk component. SEGUE has a well-defined, quantitative target-selection algorithm, based on ugriz photometry and proper motions; this allows us to adjust our spectroscopic sample such that it accurately represents the underlying Milky Way populations.Combining atmospheric parameters, determined by an optimized version of the SEGUE Stellar Parameter Pipeline, with various isochrones, we calculate the distance to each star, accurate to {approx}12%. We then quantify the variation in metallicity with respect to spatial position from the Galactic center (R) and the plane of the Galaxy (|Z|). Our unbiased observations of G and K dwarfs provide valuable constraints for chemical and dynamical Galaxy evolution models, with particular utility for thin- and thick-disk formation theory. Although our uncertainties in the radial metallicity gradient are large, we are consistent with the results from Cheng et al., estimating a negative gradient below |Z| of 1 kpc that flattens above this height. Both spectral types also exhibit a consistent decrease in [Fe/H] with increasing |Z|, approximately -0.3 dex/kpc. Comparison with the sample of Lee et al., which distinguishes between the thin and thick disk using [{alpha}/Fe], suggests that this gradient reflects the transition in G and K dwarfs from a thin-disk dominated sample at small |Z| to a sample consisting primarily of thick-disk stars above |Z| of 1 kpc. We compare our distributions to those of two different models of the Galaxy: the population synthesis model TRILEGAL (Girardi et al. 2004) and that of Schoenrich & Binney which simulates chemical and dynamical evolution. Both models show little change in [Fe/H] with respect to |Z| and are unable to replicate the metallicity distributions we observe above |Z| of 0.5 kpc. This result is not surprising, as the existing chemical constraints on Galaxy models are limited to the solar neighborhood, which is thin-disk dominated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determining the squark mass at the LHC

We propose a new way to determine the squark mass based on the shape of dijet invariant mass distribution of supersymmetry dijet events at the Large Hadron Collider. Our algorithm, which is based on event kinematics, requires that the branching ratio B(q-tilde{yields}qZ-tilde{sub 1}) is substantial for at least some types of squarks, and that m{sub Z}-tilde{sub 1}{sup 2}/m{sub q}-tilde{sup 2}<<1. We select dijet events with no isolated leptons, and impose cuts on the total jet transverse energy, E{sub T}{sup tot}=E{sub T}(j{sub 1})+E{sub T}(j{sub 2}), on {alpha}=E{sub T}(j{sub 2})/m{sub jj}, and on the azimuthal angle between the two jets to reduce standard model backgrounds. The shape of the resulting dijet mass distribution depends sensitively on the squark mass, especially if the integrated luminosity is sufficient to allow a hard enough cut on E{sub T}{sup tot} and yet leave a large enough signal to obtain the m{sub jj} distribution. We simulate the signal and standard model backgrounds for 100 fb{sup -1} integrated luminosity at 14 TeV requiring E{sub T}{sup tot}>700 GeV. We show that it should be possible to extract m{sub q}-tilde to within about 3% at 95% confidence level-similar to the precision obtained using m{sub T2}-from the dijet mass distribution if m{sub q}-tilde{approx}650 GeV, or to within {approx}5% if m{sub q}-tilde{approx}1 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Transverse energy–energy correlations of jets in the electron–proton deep inelastic scattering at HERA

We study the event shape variables, transverse energy–energy correlation TEEC (cosφ) and its asymmetry ATEEC (cosφ) in deep inelastic scattering (DIS) at the electron–proton collider HERA, where φ is the angle between two jets defined using a transverse-momentum (k T ) jet algorithm. At HERA, jets are defined in the Breit frame, and the leading nontrivial transverse energy–energy correlations arise from the 3-jet configurations. With the help of the NLOJET++, these functions are calculated in the leading order (LO) and the next-to-leading order (NLO) approximations in QCD at the electron–proton center-of-mass energy $\sqrt{s}$ = 314 GeV. We restrict the angular region to -0.8 ≤ cosφ ≤ 0.8, as the forward- and backward-angular regions require resummed logarithmic corrections, which we have neglected in this work. Following experimental jet-analysis at HERA, we restrict the DIS-variables x, y = Q 2 /(xs), where Q 2 = -q 2 is the negative of the momentum transfer squared q 2 , to 0 ≤ x ≤ 1, 0.2 ≤ y ≤ 0.6, and the pseudo-rapidity variable in the laboratory frame (η lab ) to the range -1 ≤ η lab ≤ 2.5. The TEEC and ATEEC functions are worked out for two ranges in Q 2 , defined by 5.5GeV 2 ≤ Q 2 ≤ 80GeV 2 , called the low-Q 2 -range, and 150GeV 2 ≤ Q 2 ≤ 1000GeV 2 , called the high-Q 2 -range. We show the sensitivity of these functions on the parton distribution functions (PDFs), the factorization (μ F ) and renormalization (μ R ) scales, and on α s (M$^2_Z$). Of these the correlations are stable against varying the scale μ F and the PDFs, but they do depend on μ R . For the choice of the scale μ R =$\sqrt{\langle ET \rangle^2+Q^2}$, advocated in earlier jet analysis at HERA, the shape variables TEEC and ATEEC are found perturbatively robust. These studies are useful in the analysis of the HERA data, including the determination of α s (M$^2_Z$) from the shape variables.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temporal and spectral imaging with micro-CT

Purpose: Micro-CT is widely used for small animal imaging in preclinical studies of cardiopulmonary disease, but further development is needed to improve spatial resolution, temporal resolution, and material contrast. We present a technique for visualizing the changing distribution of iodine in the cardiac cycle with dual source micro-CT. Methods: The approach entails a retrospectively gated dual energy scan with optimized filters and voltages, and a series of computational operations to reconstruct the data. Projection interpolation and five-dimensional bilateral filtration (three spatial dimensions + time + energy) are used to reduce noise and artifacts associated with retrospective gating. We reconstruct separate volumes corresponding to different cardiac phases and apply a linear transformation to decompose these volumes into components representing concentrations of water and iodine. Since the resulting material images are still compromised by noise, we improve their quality in an iterative process that minimizes the discrepancy between the original acquired projections and the projections predicted by the reconstructed volumes. The values in the voxels of each of the reconstructed volumes represent the coefficients of linear combinations of basis functions over time and energy. We have implemented the reconstruction algorithm on a graphics processing unit (GPU) with CUDA. We tested the utility of the technique in simulations and applied the technique in an in vivo scan of a C57BL/6 mouse injected with blood pool contrast agent at a dose of 0.01 ml/g body weight. Postreconstruction, at each cardiac phase in the iodine images, we segmented the left ventricle and computed its volume. Using the maximum and minimum volumes in the left ventricle, we calculated the stroke volume, the ejection fraction, and the cardiac output. Results: Our proposed method produces five-dimensional volumetric images that distinguish different materials at different points in time, and can be used to segment regions containing iodinated blood and compute measures of cardiac function. Conclusions: We believe this combined spectral and temporal imaging technique will be useful for future studies of cardiopulmonary disease in small animals.

60 APPLIED LIFE SCIENCES↗

Cone beam x-ray luminescence computed tomography: A feasibility study

Purpose: The appearance of x-ray luminescence computed tomography (XLCT) opens new possibilities to perform molecular imaging by x ray. In the previous XLCT system, the sample was irradiated by a sequence of narrow x-ray beams and the x-ray luminescence was measured by a highly sensitive charge coupled device (CCD) camera. This resulted in a relatively long sampling time and relatively low utilization of the x-ray beam. In this paper, a novel cone beam x-ray luminescence computed tomography strategy is proposed, which can fully utilize the x-ray dose and shorten the scanning time. The imaging model and reconstruction method are described. The validity of the imaging strategy has been studied in this paper. Methods: In the cone beam XLCT system, the cone beam x ray was adopted to illuminate the sample and a highly sensitive CCD camera was utilized to acquire luminescent photons emitted from the sample. Photons scattering in biological tissues makes it an ill-posed problem to reconstruct the 3D distribution of the x-ray luminescent sample in the cone beam XLCT. In order to overcome this issue, the authors used the diffusion approximation model to describe the photon propagation in tissues, and employed the sparse regularization method for reconstruction. An incomplete variables truncated conjugate gradient method and permissible region strategy were used for reconstruction. Meanwhile, traditional x-ray CT imaging could also be performed in this system. The x-ray attenuation effect has been considered in their imaging model, which is helpful in improving the reconstruction accuracy. Results: First, simulation experiments with cylinder phantoms were carried out to illustrate the validity of the proposed compensated method. The experimental results showed that the location error of the compensated algorithm was smaller than that of the uncompensated method. The permissible region strategy was applied and reduced the reconstruction error to less than 2 mm. The robustness and stability were then evaluated from different view numbers, different regularization parameters, different measurement noise levels, and optical parameters mismatch. The reconstruction results showed that the settings had a small effect on the reconstruction. The nonhomogeneous phantom simulation was also carried out to simulate a more complex experimental situation and evaluated their proposed method. Second, the physical cylinder phantom experiments further showed similar results in their prototype XLCT system. With the discussion of the above experiments, it was shown that the proposed method is feasible to the general case and actual experiments. Conclusions: Utilizing numerical simulation and physical experiments, the authors demonstrated the validity of the new cone beam XLCT method. Furthermore, compared with the previous narrow beam XLCT, the cone beam XLCT could more fully utilize the x-ray dose and the scanning time would be shortened greatly. The study of both simulation experiments and physical phantom experiments indicated that the proposed method was feasible to the general case and actual experiments.

60 APPLIED LIFE SCIENCES↗

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

The Large Hadron Collider (LHC) at CERN promises a major step forward in the understanding of the fundamental nature of matter. The ATLAS experiment is a general-purpose detector for the LHC, whose design was guided by the need to accommodate the wide spectrum of possible physics signatures. The major remit of the ATLAS experiment is the exploration of the TeV mass scale where groundbreaking discoveries are expected. In the focus are the investigation of the electroweak symmetry breaking and linked to this the search for the Higgs boson as well as the search for Physics beyond the Standard Model. In this report a detailed examination of the expected performance of the ATLAS detector is provided, with a major aim being to investigate the experimental sensitivity to a wide range of measurements and potential observations of new physical processes. An earlier summary of the expected capabilities of ATLAS was compiled in 1999 [1]. A survey of physics capabilities of the CMS detector was published in [2]. The design of the ATLAS detector has now been finalised, and its construction and installation have been completed [3]. An extensive test-beam programme was undertaken. Furthermore, the simulation and reconstruction software code and frameworks have been completely rewritten. Revisions incorporated reflect improved detector modelling as well as major technical changes to the software technology. Greatly improved understanding of calibration and alignment techniques, and their practical impact on performance, is now in place. The studies reported here are based on full simulations of the ATLAS detector response. A variety of event generators were employed. The simulation and reconstruction of these large event samples thus provided an important operational test of the new ATLAS software system. In addition, the processing was distributed world-wide over the ATLAS Grid facilities and hence provided an important test of the ATLAS computing system - this is the origin of the expression 'CSC studies' ('computing system commissioning'), which is occasionally referred to in these volumes. The work reported does generally assume that the detector is fully operational, and in this sense represents an idealised detector: establishing the best performance of the ATLAS detector with LHC proton-proton collisions is a challenging task for the future. The results summarised here therefore represent the best estimate of ATLAS capabilities before real operational experience of the full detector with beam. Unless otherwise stated, simulations also do not include the effect of additional interactions in the same or other bunch-crossings, and the effect of neutron background is neglected. Thus simulations correspond to the low-luminosity performance of the ATLAS detector. This report is broadly divided into two parts: firstly the performance for identification of physics objects is examined in detail, followed by a detailed assessment of the performance of the trigger system. This part is subdivided into chapters surveying the capabilities for charged particle tracking, each of electron/photon, muon and tau identification, jet and missing transverse energy reconstruction, b-tagging algorithms and performance, and finally the trigger system performance. In each chapter of the report, there is a further subdivision into shorter notes describing different aspects studied. The second major subdivision of the report addresses physics measurement capabilities, and new physics search sensitivities. Individual chapters in this part discuss ATLAS physics capabilities in Standard Model QCD and electroweak processes, in the top quark sector, in b-physics, in searches for Higgs bosons, supersymmetry searches, and finally searches for other new particles predicted in more exotic models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Objective models of compressed breast shapes undergoing mammography

Purpose: To develop models of compressed breasts undergoing mammography based on objective analysis, that are capable of accurately representing breast shapes in acquired clinical images and generating new, clinically realistic shapes. Methods: An automated edge detection algorithm was used to catalogue the breast shapes of clinically acquired cranio-caudal (CC) and medio-lateral oblique (MLO) view mammograms from a large database of digital mammography images. Principal component analysis (PCA) was performed on these shapes to reduce the information contained within the shapes to a small number of linearly independent variables. The breast shape models, one of each view, were developed from the identified principal components, and their ability to reproduce the shape of breasts from an independent set of mammograms not used in the PCA, was assessed both visually and quantitatively by calculating the average distance error (ADE). Results: The PCA breast shape models of the CC and MLO mammographic views based on six principal components, in which 99.2% and 98.0%, respectively, of the total variance of the dataset is contained, were found to be able to reproduce breast shapes with strong fidelity (CC view mean ADE = 0.90 mm, MLO view mean ADE = 1.43 mm) and to generate new clinically realistic shapes. The PCA models based on fewer principal components were also successful, but to a lesser degree, as the two-component model exhibited a mean ADE = 2.99 mm for the CC view, and a mean ADE = 4.63 mm for the MLO view. The four-component models exhibited a mean ADE = 1.47 mm for the CC view and a mean ADE = 2.14 mm for the MLO view. Paired t-tests of the ADE values of each image between models showed that these differences were statistically significant (max p-value = 0.0247). Visual examination of modeled breast shapes confirmed these results. Histograms of the PCA parameters associated with the six principal components were fitted with Gaussian distributions. The six-component model was also used to generate CC and MLO view mammogram breast shapes, using the mean PCA parameter values of these distributions and randomly generated values based on the fitted Gaussian distributions, which resemble clinically encountered breasts. A spreadsheet with the data necessary to apply this model is provided as the supplementary material. Conclusions: Our PCA models of breast shapes in both mammographic views successfully reproduce analyzed breast shapes and generate new clinically relevant shapes. This work can aid in research applications which incorporate breast shape modeling, such as x-ray scatter correction, dosimetry, and image registration.

60 APPLIED LIFE SCIENCES↗