Search NASA⌕ Search

SEARCH · Search NASA

Results for “reference models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Investigating the Impact of Power-Take-Off System Parameters and Control Law on a Rotational Wave Energy Converter’s Peak-to-Average Power Ratio Reduction

Due to the irregular nature of real waves, the power captured in a wave energy converter (WEC) system is highly variable. This is an important barrier to the effective use of WECs. To address this challenge, this study focuses on a rotational WEC power-take-off system in which high-speed and high-efficiency generators along with a torque/power smoothing inertia element can be effectively utilized. In the first phase of this study, the U.S. Department of Energy’s reference model 3 (WEC-Sim RM3; two-body point absorber), along with a slider-crank WEC, were integrated for linear to rotational conversion. Relative motion between the float and spar in RM3 was the driving force for this slider-crank WEC, which is connected to a motor/generator set through a gearbox. RM3 geometry was scaled down by 25 times to work within the limits of the physical motor/generator set used in the experimentation. Once the integration in a hardware-in-the-loop simulation environment was successfully completed, data on the peak-to-average power ratio was collected for various wave conditions including regular and irregular waves. The control algorithm designed to keep the system in resonance with waves was able to maintain relatively high speed depending on the specific gear ratio and wave period. Initial results with hardware-in-the-loop simulations reveal that gear ratio and crank radius have a strong impact on the peak-to-average power ratio. In addition, it was found that output power from the generator was maximized at a larger gear ratio, as the crank radius was increased.

50 EE - Wind and Water Power Program - Water (EE-4↗

High-resolution lithospheric structure of continental China from joint inversion of surface wave and gravity data

The lithospheric structure of continental China has been previously determined by seismic travel time tomography, surface wave tomography, and joint inversion of body wave and surface wave data. However, due to the inherent limitations of seismic data, the lithospheric structure of continental China is still not well resolved in the shallow part and in some regions where the station coverage is relatively sparse. In this study, we aim at improving the lithospheric structure by joint inversion of seismic surface wave data and satellite gravity data to take advantage of the uniform distribution and complementary strength of the gravity data. Here, the empirical relationship between velocity and density is used as a bridge for joint inversion of surface wave and gravity data. The joint inversion shear-wave velocity Vs (density) model, named as USTClitho1.0g, can fit both surface wave and gravity data well. This high-resolution Vs model can better fit the active airgun source seismic arrival times and better delineate some features in continental China, such as the velocity contrast across the north–south gravity lineament (NSGL), the lithosphere thinning in eastern China, the crustal footprint of the Hainan mantle plume, the likely magma chamber beneath volcanos in northeast China, the middle-lower crust low velocity layer beneath the Tibetan plateau, and the tearing of subducted Indian mantle lithosphere. Our joint inversion Vs model can provide a reference model for geosciences in continental China and surrounding areas.

58 GEOSCIENCES↗

A new approach to cosmological perturbations in f(R) models

We propose an analytic procedure that allows to determine quantitatively the deviation in the behavior of cosmological perturbations between a given f(R) modified gravity model and a ΛCDM reference model. Our method allows to study structure formation in these models from the largest scales, of the order of the Hubble horizon, down to scales deeply inside the Hubble radius, without employing the so-called 'quasi-static' approximation. Although we restrict our analysis here to linear perturbations, our technique is completely general and can be extended to any perturbative order.

79 ASTRONOMY AND ASTROPHYSICS↗

The Virtual Test Bed (VTB) repository: a library of multiphysics reference reactor models using NEAMS tools

With the next generation of nuclear reactors under development, modeling and simulation (MS) tools are being developed by the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in order to support their design, licensing, and future operation. Mirroring the physical test beds currently under construction (i.e., EBR-II and ZPPR), the Virtual Test Bed (VTB) was launched by the National Reactor Innovation Center (NRIC) in collaboration with NEAMS to support the advanced reactor community. This collaborative effort, which involves multiple teams at both Idaho National Laboratory and Argonne National Laboratory aims to use NEAMS tools to model a wide range of reactor designs. Those models are automatically tested to ensure their continued functionality as the tools are further developed. Examples are extensively documented, each acting as a tutorial for applying the relevant NEAMS tools to that reactor design. Currently, five advanced reactor types (with a total of eight specific design variants) are simulated by a variety of different models. These models range from steady-state, core multiphysics simulations to integrated plant analysis during loss-of flow transients. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Reference constitutive model for Alloy 617 and 316H stainless steel for use with the ASME Division 5 design by inelastic analysis rules

This report describes the development, calibration, and validation of an inelastic constitutive model describing the monotonic, cyclic, and creep behavior of Alloy 617 from room temperature to 983 °C . The model is intended for incorporation into a new Nonmandatory Appendix to Section III, Division 5, Subsection HB, Subpart B of the ASME Boiler & Pressure Vessel Code providing guidance on developing models for use with the ASME design by inelastic analysis provisions as well as a listing of acceptable material models for each Class A material that designers can use without further validation. The report described the development of the A617 model as well as providing an updated draft appendix, ready for ASME ballot, incorporating the A617 and and the previously-developed 316H model. The development of this appendix and the related material models will promote the widespread application of the generally more efficient inelastic analysis rules rules.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A global reference atmospheric model for surface to orbital altitudes

An empirical atmospheric model has been developed which generates values for pressure, density, temperature and winds from surface levels to orbital altitudes. The output parameters consist of components for: (1) latitude, longitude, and altitude dependent monthly means; (2) quasi-biennial oscillations; and (3) random perturbations to partially simulate the variability due to synoptic, diurnal, planetary wave and gravity wave variations. The monthly mean models consist of: NASA's four dimensional worldwide model for height, latitude, and longitude dependent monthly means from the surface to 25 km; and a newly developed latitude-longitude dependent model which is an extension of the Groves latitude dependent model for the region between 25 and 90 km. The Jacchia 1970 model is used above 90 km and is faired with the modified Groves values between 90 and 115 km. Quasi-biennial and random variation perturbations are computed from parameters determined from various empirical studies, and are added to the monthly mean values.

Justus, C. G.↗

Robustness of adaptive control algorithms in the presence of unmodeled dynamics

This paper reports the outcome of an exhaustive analytical and numerical investigation of stability and robustness properties of a wide class of adaptive control algorithms in the presence of unmodeled dynamics and output disturbances. The class of adaptive algorithms considered are those commonly referred to as model-reference adaptive control algorithms, self-tuning controllers, and dead-beat adaptive controllers; they have been developed for both continuous-time systems and discrete-time systems. The existing adaptive control algorithms have been proven to be globally asymptotically stable under certain assumptions, the key ones being (1) that the number of poles and zeroes of the unknown plant are known, and (2) that the primary performance criterion is related to good command following. These theoretical assumptions are too restrictive from an engineering point of view. Real plants always contain unmodeled high-frequency dynamics and small delays, and hence no upper bound on the number of the plant poles and zeroes exists. Also real plants are always subject to unmeasurable output additive disturbances, although these may be guide small. Hence, it is important to critically examine the stability robustness properties of the existing adaptive algorithms when some of the theoretical assumptions are removed; in particular, their stability and performance properties in the presence of unmodeled dynamics and output disturbances. Previously announced in STAR as N83-16061

Rohrs, C. E.↗

Range reference atmosphere models

A description is given of the methods used to establish the statistical parameters and models for wind and various thermodynamic quantities at an altitude of 0-70 km for nine geographical locations. It is noted that wind is modeled as a vector quantity using the bivariate normal probability function. With the five parameters of the bivariate normal distribution, the distribution for wind speed is derived as a generalized Rayleigh distribution. In addition, the frequency of wind direction is derived, and the conditional distribution of wind speed given the wind direction is derived. It is pointed out that these and other wind models are consistent with the rigorous mathematical properties of the bivariate normal probability theory. The thermodynamic quantities are consistent with the hydrostatic equation and the equation of state for the mean values. With these methods, many statistical relationships can be derived.

Smith, O. E.↗

Global Reference Atmosphere Model (GRAM)

GRAM series of four-dimensional atmospheric model validated by years of data. GRAM program, still available. More current are Gram 86, which includes atmospheric data from 1986 and runs on DEC VAX, and GRAM 88, which runs on IBM 3084. Program generates altitude profiles of atmospheric parameters along any simulated trajectory through atmosphere, and also useful for global circulation and diffusion studies.

Woodrum, A. W.↗

CHIMERA II - A real-time multiprocessing environment for sensor-based robot control

A multiprocessing environment for a wide variety of sensor-based robot system, providing the flexibility, performance, and UNIX-compatible interface needed for fast development of real-time code is addressed. The requirements imposed on the design of a programming environment for sensor-based robotic control is outlined. The details of the current hardware configuration are presented, along with the details of the CHIMERA II software. Emphasis is placed on the kernel, low-level interboard communication, user interface, extended file system, user-definable and dynamically selectable real-time schedulers, remote process synchronization, and generalized interprocess communication. A possible implementation of a hierarchical control model, the NASA/NBS standard reference model for telerobot control system is demonstrated.

Stewart, David B.↗

Mars global reference atmosphere model (Mars-GRAM)

Mars-GRAM is an empirical model that parameterizes the temperature, pressure, density, and wind structure of the Martian atmosphere from the surface through thermospheric altitudes. In the lower atmosphere of Mars, the model is built around parameterizations of height, latitudinal, longitudinal, and seasonal variations of temperature determined from a survey of published measurements from the Mariner and Viking programs. Pressure and density are inferred from the temperature by making use of the hydrostatic and perfect gas laws relationships. For the upper atmosphere, the thermospheric model of Stewart is used. A hydrostatic interpolation routine is used to insure a smooth transition from the lower portion of the model to the Stewart thermospheric model. Other aspects of the model are discussed.

Justus, C. G.↗

Global Reference Atmosphere Model (GRAM)

4D model provides atmospheric parameter values either automatically at positions along linear path or along any set of connected positions specified by user. Based on actual data, GRAM provides thermal wind shear for monthly mean winds, percent deviation from standard atmosphere, mean vertical wind, and perturbation data for each position.

Johnson, D. L.↗

Global Reference Atmospheric Model - 1990

GRAM-90, improvement on original model, provides values of atmospheric parameters, either automatically at positions along linear path or along any set of connected positions specified by user. Parameters produced include monthly total and mean values of pressure, density, temperature, and wind, as well as perturbation values and magnitudes. Also provides thermal wind shear for monthly mean winds, percent deviation from standard atmosphere, mean vertical wind, and perturbation data for each position. Perturbation data consist of values of quasi-biennial and random perturbations. Written in FORTRAN 77.

Justus, C. G.↗

Earth Global Reference Atmospheric Model (GRAM99): Short Course

Earth-GRAM is a FORTRAN software package that can run on a variety of platforms including PC's. For any time and location in the Earth's atmosphere, Earth-GRAM provides values of atmospheric quantities such as temperature, pressure, density, winds, constituents, etc.. Dispersions (perturbations) of these parameters are also provided and have realistic correlations, means, and variances - useful for Monte Carlo analysis. Earth-GRAM is driven by observations including a tropospheric database available from the National Climatic Data Center. Although Earth-GRAM can be run in a "stand-alone" mode, many users incorporate it into their trajectory codes. The source code is distributed free-of-charge to eligible recipients.

Leslie, Fred W.↗

Empirical Storm-Time Correction to the International Reference Ionosphere Model E-Region Electron and Ion Density Parameterizations Using Observations from TIMED/SABER

The response of the ionospheric E-region to solar-geomagnetic storms can be characterized using observations of infrared 4.3 micrometers emission. In particular, we utilize nighttime TIMED/SABER measurements of broadband 4.3 micrometers limb emission and derive a new data product, the NO+(v) volume emission rate, which is our primary observation-based quantity for developing an empirical storm-time correction the IRI E-region electron density. In this paper we describe our E-region proxy and outline our strategy for developing the empirical storm model. In our initial studies, we analyzed a six day storm period during the Halloween 2003 event. The results of this analysis are promising and suggest that the ap-index is a viable candidate to use as a magnetic driver for our model.

Mertens, Christoper J.↗

Earth Global Reference Atmospheric Model 2007 (Earth-GRAM07)

GRAM is a Fortran software package that can run on a variety of platforms including PC's. GRAM provides values of atmospheric quantities such as temperature, pressure, density, winds, constituents, etc. GRAM99 covers all global locations, all months, and heights from the surface to approx. 1000 km). Dispersions (perturbations) of these parameters are also provided and are spatially and temporally correlated. GRAM can be run in a stand-alone mode or called as a subroutine from a trajectory program. GRAM07 is diagnostic, not prognostic (i.e., it describes the atmosphere, but it does not forecast). The source code is distributed free-of-charge to eligible recipients.

Leslie, Fred W.↗