Search NASA⌕ Search

SEARCH · Search NASA

Results for “remote data collection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Small-Scale Density Variations in the Lunar Crust Revealed by GRAIL

Data from the Gravity Recovery and Interior Laboratory (GRAIL) mission have revealed that approximately 98 percent of the power of the gravity signal of the Moon at high spherical harmonic degrees correlates with the topography. The remaining 2 percent of the signal, which cannot be explained by topography, contains information about density variations within the crust. These high-degree Bouguer gravity anomalies are likely caused by small-scale (10's of km) shallow density variations. Here we use gravity inversions to model the small-scale three-dimensional variations in the density of the lunar crust. Inversion results from three non-descript areas yield shallow density variations in the range of 100-200 kg/m3. Three end-member scenarios of variations in porosity, intrusions into the crust, and variations in bulk crustal composition were tested as possible sources of the density variations. We find that the density anomalies can be caused entirely by changes in porosity. Characteristics of density anomalies in the South Pole-Aitken basin also support porosity as a primary source of these variations. Mafic intrusions into the crust could explain many, but not all of the anomalies. Additionally, variations in crustal composition revealed by spectral data could only explain a small fraction of the density anomalies. Nevertheless, all three sources of density variations likely contribute. Collectively, results from this study of GRAIL gravity data, combined with other studies of remote sensing data and lunar samples, show that the lunar crust exhibits variations in density by plus or minus 10 percent over scales ranging from centimeters to 100’s of kilometers.

J C Jansen↗
NASA NTRS1999

Hyperspectral Remote Sensing and Ecological Modeling Research and Education at Mid America Remote Sensing Center (MARC): Field and Laboratory Enhancement

The purpose of this project was to establish a new hyperspectral remote sensing laboratory at the Mid-America Remote sensing Center (MARC), dedicated to in situ and laboratory measurements of environmental samples and to the manipulation, analysis, and storage of remotely sensed data for environmental monitoring and research in ecological modeling using hyperspectral remote sensing at MARC, one of three research facilities of the Center of Reservoir Research at Murray State University (MSU), a Kentucky Commonwealth Center of Excellence. The equipment purchased, a FieldSpec FR portable spectroradiometer and peripherals, and ENVI hyperspectral data processing software, allowed MARC to provide hands-on experience, education, and training for the students of the Department of Geosciences in quantitative remote sensing using hyperspectral data, Geographic Information System (GIS), digital image processing (DIP), computer, geological and geophysical mapping; to provide field support to the researchers and students collecting in situ and laboratory measurements of environmental data; to create a spectral library of the cover types and to establish a World Wide Web server to provide the spectral library to other academic, state and Federal institutions. Much of the research will soon be published in scientific journals. A World Wide Web page has been created at the web site of MARC. Results of this project are grouped in two categories, education and research accomplishments. The Principal Investigator (PI) modified remote sensing and DIP courses to introduce students to ii situ field spectra and laboratory remote sensing studies for environmental monitoring in the region by using the new equipment in the courses. The PI collected in situ measurements using the spectroradiometer for the ER-2 mission to Puerto Rico project for the Moderate Resolution Imaging Spectrometer (MODIS) Airborne Simulator (MAS). Currently MARC is mapping water quality in Kentucky Lake and vegetation in the Land-Between-the Lakes (LBL) using Landsat-TM data. A Landsat-TM scene of the same day was obtained to relate ground measurements to the satellite data. A spectral library has been created for overstory species in LBL. Some of the methods, such as NPDF and IDFD techniques for spectral unmixing and reduction of effects of shadows in classifications- comparison of hyperspectral classification techniques, and spectral nonlinear and linear unmixing techniques, are being tested using the laboratory.

Cetin, Haluk↗
NASA NTRS1995

Innovative Imaging Spectrometer Calibration Techniques

A laboratory calibration of the Airborne Visible Infrared Imaging Spectrometer (AVIRIS) allowed experimentation with several innovative calibration techniques that would improve calibration accuracy, provide independent checks for systematic errors, and reduce the time required to collect a calibration data set.

remote sensing AVIRIS Airborne Visible Infrared Im↗
NASA NTRS2015

The Role of the NASA Global Hawk Link Module as an Information Nexus For Atmospheric Mapping Missions

The Link Module described in this paper was developed for the NASA Uninhabited Aerial System (UAS) Global Hawk Pacific Mission (GloPAC) Airborne Science Campaign; four flights of 30 hour duration, supporting the Aura Validation Experiment (AVE). It was used again during the Genesis and Rapid Intensification Processes (GRIP) experiment, a NASA Earth Science field experiment to better understand how tropical storms form and develop into major hurricanes. In these missions, the Link Module negotiated all communication over the high bandwidth Ku satellite link, archived all the science data from onboard experiments in a spatially enabled database, routed command and control of the instruments from the Global Hawk Operations Center, and re-transmitted select data sets directly to experimenters control and analysis systems. The availability of aggregated information from collections of sensors, and remote control capabilities, in real-time, is revolutionizing the way Airborne Science is being conducted. The Link Module NG now being flown in support of the NASA Earth Venture missions, the Hurricane and Severe Storm Sentinel (HS3) mission, and Airborne Tropical Tropopause Experiment (A TTREX) mission, has advanced data fusion technologies that are further advancing the Scientific productivity, flexibility and robustness of these systems. On-the-fly traffic shaping has been developed to allow the high definition video, used for critical flight control segments, to dynamically allocate variable bandwidth on demand. Historically, the Link Module evolved from the instrument and communication interface controller used by NASA's Pathfinder and Pathfinder plus solar powered UAS's in the late 1990' s. It later was expanded for use in the AIRDAS four channel scanner flown on the NASA Altus UAS, and then again to a module in the AMS twelve channel multispectral scanner flying on the NASA (Predator-b) Ikhana UAS. The current system is the answer to the challenges imposed by extremely long duration UASs, with on-board multi-instrument (>= 12) Sensor Webs.

Hurricanes↗
NASA NTRS2012

An Information NEXUS: The NASA Global Hawk Link Module

The Link Module described in this paper was first developed for the NASA Global Hawk Pacific Mission (GloPAC), four flights of 30 hour duration, supporting the Aura Validation Experiment (AVE). Its second use was during the Genesis and Rapid Intensification Processes (GRIP) experiment, a NASA Earth Science field experiment to better understand how tropical storms form and develop into major hurricanes. In these missions, the Link module negotiated all communication over the high bandwidth Ku satellite link, archived al the science data from onboard experiments in a spatially enable database, routed command and control of the instruments from the Global Hawk Operations Center, and retransmitted select data sets directly to experimenters control and analysis systems. The availability of aggregated information from collections of sensors, and remote control capabilities, in real-time, is revolutionizing the way Airborne Science is being conducted. Also described is the next generation Link Module now being designed and tested to support the NASA Earth Venture missions, the Hurricane and Severe Storm Sentinel (HS3) mission, and Airborne Tropical Tropopause Experiment (ATTREX) mission. Advanced data fusion technologies being developed will further advance the Scientific productivity, flexibility and robustness of these systems. Historically, the Link module evolved from the instrument and communication interface controller used by NASA's Pathfinder and Pathfinder plus solar powered UAS's in the late 1990's. It later was expanded for use in the AIRDAS four channel scanner flown on the NASA Altus UAS, and then again to a module in the AMS twelve channel multispectral scanner flying on the NASA (Predator-b) Ikhana UAS. The current system is the next step in the evolution, a multi board system packaged in a Curtiss Wright MIL-spec, flight qualified enclosure.

Remote Sensing↗
NASA NTRS1981

Remote sensing of total dry-matter accumulation in winter wheat

Red and photographic-infrared spectral data collected on 21 dates over the growing season with a hand-held radiometer were quantitatively correlated with total dry-matter accumulation in winter wheat. The spectral data were found to be highly related to vigor and condition of the plant canopy. Two periods of drought stress and subsequent recovery from it were readily apparent in the spectral data. Simple ratios of the spectral radiance data compensated for variations in solar intensities and, when integrated over the growing season, explained 79% of the variation in total above-ground accumulation of dry matter. A satellite system is proposed to provide large-area assessment of total dry accumulation or net primary production from terrestrial vegetation.

Tucker, C. J.↗
NASA NTRS1975

Studies of recognition with multitemporal remote sensor data

Characteristics of multitemporal data and their use in recognition processing were investigated. Principal emphasis was on satellite data collected by the LANDSAT multispectral scanner and on temporal changes throughout a growing season. The effects of spatial misregistration on recognition performance with multitemporal data were examined. A capability to compute probabilities of detection and false alarm was developed and used with simulated distributions for misregistered pixels. Wheat detection was found to be degraded and false alarms increased by misregistration effects. Multitemporal signature characteristics and multitemporal recognition processing were studied to gain insights into problems associated with this approach and possible improvements. Recognition performance with one multitemporal data set displayed marked improvements over results from single-time data.

Malila, W. A.↗
NASA NTRS2023

South Slough Water Resources: Monitoring Changes in Water Quality to Identify Stressors in Eelgrass Extent Throughout the Coos Estuary

The Coos estuary in Southern Oregon supports a variety of habitats, including eelgrass (Zostera marina) meadows. Eelgrass meadows provide shelter and sustenance to local and migratory wildlife, including commercially important fishes, and cultural resources to local communities. These ecosystem services establish eelgrass as an ecologically, economically, and culturally important resource. However, the extent and density of eelgrass meadows within this estuary have declined substantially since 2005, threatening the ecosystem services they provide. NASA DEVELOP partnered with the South Slough National Estuarine Research Reserve and the Confederated Tribes of the Coos, Lower Umpqua, and Siuslaw Indians’ Department of Natural Resources to generate time-series maps of the water quality conditions (chlorophyll-a, turbidity) and eelgrass extent in the Coos estuary from 2016 to 2023 to better understand the conditions driving eelgrass decline. The DEVELOP team used NASA Earth observations including Landsat 8 Operational Land Imager (OLI), Landsat 9 OLI-2, and the European Space Agency’s Sentinel-2 Multispectral Instrument (MSI) to generate these time-series maps. The team faced limitations in the feasibility of detecting eelgrass within the Coos Estuary, including spectral resolution, tidal phase, and turbidity. These limitations indicate additional in situ data collection will be necessary for accurate eelgrass assessment. Meanwhile, the team determined it is feasible to assess turbidity and chlorophyll-a within the Coos Estuary using remote satellite data. These tools enabled the research partners to assess water quality characteristics within the Coos Estuary at a greater spatial scale and may provide a method of inexpensive preliminary investigation of eelgrass meadow locations.

eelgrass↗
NASA NTRS1999

Enhancement of Capabilities in Hyperspectral and Radar Remote Sensing for Environmental Assessment and Monitoring

The University of Utah, Department of Geography has developed a research and instructional program in satellite remote sensing and image processing. The University requested funds for the purchase of software licenses, mass storage for massive hyperspectral imager data sets, upgrades for the central data server to handle the additional storage capacity, a spectroradiometer for field data collection. These purchases have been made. This equipment will support research in one of the newest and most rapidly expanding areas of remote sensing.

Hepner, George F.↗
NASA NTRS1973

Discrimination techniques employing both reflective and thermal multispectral signals

Recent improvements in remote sensor technology carry implications for data processing. Multispectral line scanners now exist that can collect data simultaneously and in registration in multiple channels at both reflective and thermal (emissive) wavelengths. Progress in dealing with two resultant recognition processing problems is discussed: (1) More channels mean higher processing costs; to combat these costs, a new and faster procedure for selecting subsets of channels has been developed. (2) Differences between thermal and reflective characteristics influence recognition processing; to illustrate the magnitude of these differences, some explanatory calculations are presented. Also introduced, is a different way to process multispectral scanner data, namely, radiation balance mapping and related procedures. Techniques and potentials are discussed and examples presented.

Malila, W. A.↗
NASA NTRS1979

Voyager program. Voyager 1 encounter at Jupiter, 5 March 1979

Highlights of Voyager 1 activity during the observatory and far-encounter phases are summarized. Daily sequence of events for the spacecraft during the period of greatest encounter activity (Feb. 26 through Mar. 7) the near-encounter phase is given. Times shown designate the time of signal reception at Deep Space Network stations. Events listed emphasize activities pertaining to the four remote sensing instruments on the scan platforms. However, the other 7 experiments will continuously collect data throughout the encounter period.

Source record↗
NASA NTRS1984

Utilization of vegetation indices to improve microwave soil moisture estimates over agricultural lands

A technique is presented by means of which visible/near-IR data are used to develop corrections in remotely sensed microwave soil moisture signals, in order to account for vegetation effects. Visible/IR data collected with the NASA NS001 Thematic Mapper Simulator were used to calculate the Perpendicular Vegetation Index (PVI), which was then related to the change of sensitivity of the microwave measurement to surface soil moisture. Effective estimation of soil moisture in the presence of vegetation can be made with L-band microwave radiometers and visible/IR sensors when the PVI is lower than 4.3. This technique offers a means for the estimation of moisture from a space platform over many agricultural areas, without expensive ground data collection.

Theis, S. W.↗
NASA NTRS1985

Activities of the Pilot Land Data System project

The University of Maryland's Remote Sensing Systems Laboratory submitted to NASA/Goddard an interim progress report on the work being conducted within its Pilot Land Data System IPLDS project. The Remote Sensing Systems Laboratory addressed the following tasks: (1) identify data types and data sources needed to describe the selected test sites in collaboration with Goddard's Hydrological Sciences Branch; (2) define the procedures necessary to access/acquire this data; (3) conduct meetings with the PLDS Systems Engineering Group to identify functional specification priorities for PLDS development; (4) assemble documentation on historical remotely sensed imagery and transfer of such information to the PLDS Data Management Group; (5) collect data identified by Goodard's Hydrological Sciences Branch for data set inventory in PLD; (6) develop a Workstation-PLDS system interface over high speed lines, (7) develop and test through a Phase 1 demonstration of a micro workstation to access PLDS; and (8) establish interdepartmental agreement of development of computer link for electronic access of water resources data from USGS.

Sircar, J. K.↗
NASA NTRS1990

Autonomous Martian flying rover

A remotely programmable, autonomous flying rover is proposed to extensively survey the Martian surface environment. A Mach .3, solar powered, modified flying wing could cover roughly a 2000 mile range during Martian daylight hours. Multiple craft launched from an orbiting mother ship could provide near-global coverage. Each craft is envisioned to fly at about 1 km above the surface and measure atmospheric composition, pressure and temperature, map surface topography, and remotely penetrate the near subsurface looking for water (ice) and perhaps evidence of life. Data collected are relayed to Earth via the orbiting mother ship. Near surface guidance and control capability is an adaptation of current cruise missile technology. A solar powered aircraft designed to fly in the low temperature, low density, carbon dioxide Martian atmosphere near the surface appears feasible.

Source record↗
NASA NTRS1993

Space Applications Industrial Laser System (SAILS)

A program is underway to develop a YAG laser based materials processing workstation to fly in the cargo bay of the Space Shuttle. This workstation, called Space Applications Industrial Laser System (SAILS), will be capable of cutting and welding steel, aluminum, and Inconel alloys of the type planned for use in constructing the Space Station Freedom. As well as demonstrating the ability of a YAG laser to perform remote (fiber-optic delivered) repair and fabrication operations in space, fundamental data will be collected on these interactions for comparison with terrestrial data and models. The flight system, scheduled to fly in 1996, will be constructed as three modules using standard Get-Away-Special (GAS) canisters. The first module holds the laser head and cooling system, while the second contains a high peak power electrical supply. The third module houses the materials processing workstation and the command and data acquisition subsystems. The laser head and workstation cansisters are linked by a fiber-optic cable to transmit the laser light. The team assembled to carry out this project includes Lumonics Industrial Products (laser), Tennessee Technological University (structural analysis and fabrication), Auburn University Center for Space Power (electrical engineering), University of Waterloo (low-g laser process consulting), and CSTAR/UTSI (data acquisition, control, software, integration, experiment design). This report describes the SAILS program and highlights recent activities undertaken at CSTAR.

Mccay, T. D.↗
NASA NTRS1995

Space Applications of Industrial Laser Systems (SAILS)

A program is under way to develop a YAG laser based materials processing workstation to fly in the cargo bay of the Space Shuttle. The system will be capable of cutting and welding steel, aluminum, and Inconel alloys of the type planned for use on Space Station Freedom. As well as demonstrating the ability of a YAG laser to perform remote (fiber-optic delivered) repair and fabrication operations in space, fundamental data will be collected on these interactions for comparison with terrestrial data and models. The flight system, scheduled to fly in 1995, will be constructed as two modules to fit into the standard Get Away Special (GAS) canisters. The first can holds the laser and its power supply, to be constructed by our industrial partner, Lumonics Industrial Processing Division. The second canister has the materials processing workstation and the command and data acquisition subsystems. These components will be provided by groups at the University of Tennessee Space Institute (UTSI) and the University of Waterloo. The cans are linked by a fiber-optic cable which transmits the beam from the laser head to the workstation.

Mueller, Robert E.↗
NASA NTRS1996

Measurement of Reactive Nitrogen Compounds over the Tropical Pacific

This report covers the Tropospheric Trace Gas and Airborne Measurement Group's (TTGAMG) participation in the NASA Global Tropospheric Experiment (GTE) Pacific Exploratory Mission: Tropics A (PEM-TA) field measurement program. With other university and NASA centers, the Georgia Institute of Technology Airborne Laser Induced Fluorescence Experiment (GITALIFE) was deployed on the NASA Ames DC-8 aircraft for the measurement of NO and NO2 One of the PEM-TA objectives was to collect the data and interpret the fast photo-chemical processes taking place in the remote and relatively pristine environment over Hawaii, Tahiti, Easter Island, New Zealand, and Fiji.

Sandholm, Scott↗