Search NASA⌕ Search

SEARCH · Search NASA

Results for “schlieren”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

A preliminary investigation of large-scale organized motions in a supersonic turbulent boundary layer on a curved surface

An experimental investigation concentrating on the change in the large-scale organized motions of a supersonic turbulent boundary layer subjected to a short region of concave surface curvature is presented. Two flows were studied, a relatively weak and a relatively strong perturbation. In both flows the freestream Mach number was 2.89 and the Reynolds number based on momentum thickness was 81,900. Hot-wire anemometry and schlieren photography provided the principle tools for this investigation. Hot-wire data were analyzed using spectral and correlation methods and conditional sampling techniques. Changes in structure angle and results of conditionally sampled velocity signals are discussed. The strong perturbation is found to increase the structure angle, and in both flows the length scales of the organized motions are altered.

Donovan, J. F.↗
NASA NTRS1987

Experimental measurement of solutal and thermal layers in unidirectional solidification

An experimental study to evaluate and characterize the effects and causes of convection in the directional solidification of metal alloys is described. The temporal history of the inverted density layers in front of a dendritic interface for directionally solidified ammonium chloride-(72 wt pct) water is presented based on photographic data taken using a laser schlieren system. Data are given for both 1-g and low-g solidification runs, and the stability of the layer is discussed. The reduction of buoyancy effects is shown to be significant, and the possible impact of reducing gravity level on freckling in metal alloys is considered.

Mccay, M. H.↗
NASA NTRS1987

On the role of convective motion during dendrite growth: Experiments under variable gravity, revised

Experiments show the effect of self induced convection on individual dendrite growth in uniformly supercooled samples and solidification of the resulting mush under conditions of high and low g. Convection is visualized by a Schlieren optical system or a Mach Zender interferometer. For ice crystals growing from the vapor in air, a slight reduction in linear growth rate occur under low g. For ice crystals growing from NaCl solution, dendrite tip velocities are unchanged, but subsequent mush solidification is enhanced through drainage channels under higher g. By contrast, sodium sulfate decahydrate dendrites growing from solution produce convective plumes which lead to higher tip growth rate only as the crystal growth direction approaches that of gravity. Convective plumes are laminar for small crystals under conditions of these experiments; the rise velocity of such plumes is greater than individual vortex rings under identical conditions. Convection effects are only present in solution under a critical supercooling less than about 5 C for sodium sulfate and 2 C for ice in NaCl since at higher supercooling the crystallization velocity, proportional to the square of the supercooling, exceeds the convective velocity, proportional to the square root of the supercooling. The role of convective velocity in bulk solidification is to give a large scale flow which under extreme cases may lead to extensive secondary crystal production, which alters the resulting crystal texture of the completely solidified melt.

Hallett, J.↗
NASA NTRS1987

Optical measurement systems

Some of the areas of research conducted at Lewis on optical measurement techniques are described. Two laser anemometer systems developed at Lewis are used to illustrate the special instrumentation needs encountered in aeropropulsion research. Velocity measurements to be made through small viewing ports, close to surfaces within the propulsion system components, and in turbulent or highly-accelerating flows are some of the significant challenges. The application to research facilities of two advanced optical systems, the rainbow schlieren and the combustor viewing system, is presented. The calibration and verification of commercial optical measuring systems, such as droplet sizing systems, are also discussed. Calibration techniques capable of simulating moving droplets for flight-type sizing systems are being developed at Lewis. The presentation concludes with a brief look at the forces driving future research on optical instrumentation.

Lesco, Daniel J.↗
NASA NTRS1987

An analysis of artificial viscosity effects on reacting flows using a spectral multi-domain technique

Analytical and experimental techniques for modeling the aerothermodynamics of hypersonic flight are assessed, together with the problems which will be encountered in developing reusable hypersonic vehicles. Emphasis is placed on a numerical coupling between a nonequilibrium chemistry model and hypersonic flow kinematics. Finite difference and finite element descriptions of flow fields in which molecules encounter a shock wave and undergo various motion (and thereby energy) transformations are discussed. The effects of artificial smearing of the shock wave are considered in terms of the resulting effects on the distribution of the energies and chemical composition of the transition region. Results are provided from schlieren photographs of shock-tube experiments, Navier-Stokes calculations of axisymmetric flow over a conical body, and calculations using a spectral multidomain approach for chemically reacting flows.

Macaraeg, Michele G.↗
NASA NTRS1988

Supersonic combusting flow - A comparison of numerical and experimental results

The flow field of an unconfined coaxial supersonic burner (SSB) was obtained numerically, using a CFD code. The explicit MacCormack algorithm, with point implicit treatment of chemistry source terms, was employed in the CFD code. Combustion of hydrogen and air was simulated by a two-step finite-rate combustion model whereas turbulence was accounted for by a Prandtl mixing length scheme. Boundary conditions and some important features of the numerical scheme were discussed. The qualitative features of the numerical solution were compared with those obtained by regular as well as schlieren photographs. General agreements of the CFD solution and the experimental photographs were observed.

Chitsomboon, T.↗
NASA NTRS1987

The use of molten salts as physical models for the study of solidification in metals and semiconductors

It is presently noted that molten salts possess attributes rendering them attractive as physical models of cast metals in solidification studies. Molten alkali halides have an approximately correct Prandtl number for this modeling of metallic melts, and are transparent to visible light. Attention is given to solidification in the LiCl-KCl system, in order to determine whether such phenomena as solute rejection can be observed and characterized through the application of laser schlieren imaging.

Koziol, Jurek K.↗
NASA NTRS1987

A physicist's view of biotechnology

Theories and techniques for small molecule crystal growth are reviewed, with emphasis on space processing possibilities, particularly for protein crystal growth. The general principles of nucleation, growth, and mass and heat transport are first discussed. Optical systems using schlieren, shadowgraph, and holographic techniques are considered, and are illustrated with the example of the NASA developed Fluids Experiment System flow aboard Spacelab 3.

Kroes, Roger L.↗
NASA NTRS1988

Supersonic jet plume interaction with a flat plate

Supersonic jet plume interaction with a flat plate was studied using a model scaled test apparatus designed to simulate plume/aircraft structure interaction for the cruise configuration. The generic configuration consisted of a rectangular supersonic nozzle of aspect ratio 7, and a large flat plate located beneath the nozzle at various nozzle plate distances; the plate was instrumented to measure surface dynamic pressure and mean wall temperature, with provisions for measurements of acceleration and strain on coupon size panels that could be inserted in the plate. Phase-averaged schlieren measurements revealed the presence of high-intensity acoustic emission from the supersonic plume above the plate, directed upstream; this radiation could be associated with the shock noise generation. Narrow band spectra of surface dynamic pressure show spectral peaks with amplitude levels reaching 1 psi, related to the screech tones. Temperature measurements indicated elevated surface temperatures in regions of high turbulence intensity.

Seiner, John M.↗
NASA NTRS1987

Research in materials processing using a low gravity simulation aircraft

The feasibility of performing materials experiments aboard the NASA KC-135 low gravity simulation aircraft is demonstrated. The vehicle serves as a research platform which flies parabolic maneuvers. Experiments which have been conducted on board the aircraft are outlined and particular attention is given to tests utilizing optical measurement techniques such as interferometry, schlieren, and holography. It is noted that the KC-135 can be used for crew training, flight hardware checkout, conceptual development, self-sufficient experiments, and research in support of and leading to space flight experiments.

Owen, Robert B.↗
NASA NTRS1988

Some implications of colloid stability theory for protein crystallization

Colloid stability theory has been applied to protein crystallization and predicts a narrow range of conditions under which crystals can be grown without the agglomeration of protein molecules (colloids) in the bulk solution. It also predicts a critical electrolyte concentration above which agglomeration will always occur. Using this theory, the rapid protein agglomeration occurring during Schlieren experiments as well as a terminal crystal size effect in a fixed container were explained. Following this concept, the supposed 'terminal' crystal size has been at least doubled.

Young, C. C.↗
NASA NTRS1988

Preliminary investigations into solutal flow about growing tetragonal lysozyme crystals

A series of preliminary experiments were done to investigate solutal flow about growing lysozyme crystals and its effects. Density-gradient-driven flow was observed using a schlieren optical system. Crystals used ranged from 0.3 to 1.72 mm across the (110) face, and protein concentrations were from 3.7 to 23.7 mg/ml. The convective plume velocities were found to be from 10 to 50 microns/s, which correlated with those predicted to occur based upon a diffusive-convective model. When microcrystals of lysozyme, less than 20 microns across the (110) face were subjected to directed solution flows, the growth rate was found to rapidly decrease over the 8-20 h course of the experiment. Solution flow rates used ranged from 18 to 40 microns/s, and protein concentrations were from 7.3 to 11.7 mg/ml, conditions typical of larger (greater than 0.5 mm) crystals in the terminal phases of a typical crystal growth procedure.

Pusey, Marc↗
NASA NTRS1988

Structure of a reattaching supersonic shear flow

A Mach 1.83 fully developed turbulent boundary layer with boundary layer thickness, free stream velocity, and Reynolds number of 7.5 mm, 476 m/s, and 6.2 x 10 to the 7th/m, respectively, was separated at a 25.4-mm backward step and formed a shear layer. Fast-response pressure transducers, schlieren photography, and LDV were used to study the structure of this reattaching shear flow. The preliminary results show that large-scale relatively organized structures with limited spanwise extent form in the free shear layer. Some of these structures appear to survive the recompression and reattachment processes, while others break down into smaller scales and the flow becomes increasingly three-dimensional. The survived large-scale structures lose their organization through recompression/reattachment, but regain it after reattachment. The structures after reattachment form a 40-45-degree angle relative to the free stream and deteriorate gradually as they move downstream.

Samimy, M.↗
NASA NTRS1989

Shock-wave-induced mixing enhancement in scramjet combustors

An experimental study of the interaction between a weak shock wave and a supersonic shear layer was carried out to determine the possibility of shock-induced mixing enhancement. A supersonic (Mach 2.5) stream of nitrogen was mixed with a sonic helium jet downstream of a rearward-facing step to simulate the mixing region in the vicinity of a SCRAMJET flameholder. A small wedge was used to generate an oblique shock wave that impinges on the mixing layer. Schlieren flow visualization and Rayleigh scattering concentration measurements were carried out. The results indicate that significant spreading of the shear layer may occur downstream of the shock/shear layer interaction region. Further study is required to determine the mechanism of the observed spreading and the extent of the increase in mixing efficiency. Since there are shock-induced losses, an optimum mixing enhancement configuration will have to be determined before the method can be validated and successfully implemented in a SCRAMJET combustor.

Menon, S.↗
NASA NTRS1989

Near-field acoustic environment of a supersonic plume adjacent to a wall

The interaction of a supersonic plume with an adjacent plane surface has been studied using phase-conditioned schlieren flow visualization and near-field microphone measurements. As a consequence of interaction with the wall, the round and 3:1 rectangular/divergent nozzle configurations generated the most intense screech at about one throat diameter from the wall. It is found that the low-aspect-ratio rectangular nozzle has a screech oscillation parallel to the wall which is enhanced by proximity to the wall.

Wlezien, R. W.↗
NASA NTRS1989

An experimental study of a reattaching supersonic shear layer

A Mach 1.83 fully developed turbulent boundary layer was separated at a 25.4 mm backward step and formed a free shear layer. The incoming boundary layer thickness, momentum thickness, and Reynolds number were approximately 8 mm, 0.5 mm, and 52x10 to the 6th/m, respectively. A two-component coincident LDV system was used to take velocity measurements of the incoming boundary layer, the free shear layer, and the reattached shear layer. The results confirmed the existence of organized structures in both the free and the reattached shear layer which was reported earlier based on the authors dynamic pressure measurements and Schlieren photographs.

Samimy, M.↗
NASA NTRS1989

Low angle injection into a supersonic flow

A study of helium jets injected into a Mach 3 airflow through circular sonic nozzles angled downstream at 15 and 30 deg is presented. An aspirating hot-film probe was employed to measure helium concentrations. The results of Schlieren and nonoshadowgraph photography show the presence of large-scale turbulent structures in the high pressure jets. Concentration data reveal some asymmetries both in the cross section of the jet and in the trajectory of the jet relative to the centerline of the jet. Plotting the decay of maximum concentration with axial distance, it is found that the mixing rate can be increased significantly by increasing the pressure ratio. These low angle jets display good cross-stream penetration.

Mays, R. B.↗
NASA NTRS1989

Laboratory and theoretical models of planetary-scale instabilities and waves

The continuous low-g environment of the orbiting space shuttle provided a setting for conducting geophysical fluid model experiments with a completely consistent representation of sphericity and the resultant radial gravity found on astrogeophysical objects. This is possible because in zero gravity an experiment can be constructed that has its own radial buoyancy forces. The dielectric forces in a liquid, which are linearly dependent on fluid temperature, give rise to an effectively radial buoyancy force when a radial electrostatic field is applied. The Geophysical Fluid Flow Cell (GFFC) experiment is an implementation of this idea in which fluid is contained between two rotating hemispheres that are differentially heated and stressed with a large ac voltage. The GFFC flew on Spacelab 3 in May 1985. Data in the form of global Schlieren images of convective patterns were obtained for a large variety of configurations. These included situations of rapid rotation (large Taylor numbers), low rotation, large and small thermal forcing, and situations with applied meridional temperature gradients. The analysis and interpretation of the GFFC-85 data are being conducted. Improvements were developed to the GFFC instrument that will allow for real-time (TV) display of convection data and for near-real-time interactive experiments. These experiments, on the transition to global turbulence, the breakdown of rapidly rotating convective planforms and other phenomena, are scheduled to be carried out on the International Microgravity Laboratory (IML-1) aboard the shuttle in June 1990.

Hart, John E.↗