Search NASA⌕ Search

SEARCH · Search NASA

Results for “sequestration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Uncertainty quantification for the impact of injection rate fluctuation on the geomechanical response of geological carbon sequestration

We present an analysis of the geomechanical effects of injection rate fluctuations for geological sequestration of carbon dioxide (CO2). Initially, we present analytical solutions for the effects of injection rate fluctuations on CO2 fluid pressure spatial distribution and temporal evolution for a typical injection scenario. Numerical calculations are performed using a finite element method to investigate the effects of injection rate fluctuations on geomechanical deformation, stresses, and potential failure of the aquifer and caprock layers. The numerical method was first validated by the fluid pressure distribution’s good agreement with the analytical solution. It was shown that for any Gaussian fluctuations of injection rate Q with given mean Q and variance ε_Q, the coefficients of variance for fluid pressure (ϵ_p=ε_p ), deformation (ϵ_u=ε_u ), and stresses (ϵ_σ=ε_σ ) increase linearly with the coefficient of variance for injection rate (ϵ_Q=ε_Q ). The proportional constants are identified, and the fluctuations have the most pronounced effect on the geomechanical stresses, and, therefore, on the potential failure of the aquifer and caprock layers. Instead of expensive computational simulation, this study provides an efficient tool to estimate the geomechanical response variance to injection rate fluctuation. A failure analysis was presented based on the numerical results, where probability of failure was estimated for fluctuating injection rates with different mean and variance during the entire injection period. It was found that with increasing injection rate fluctuation, the failure probability increases significantly. Therefore, the risk associated with injection rate fluctuations should be carefully evaluated.

58 GEOSCIENCES↗

Optimal well placement and brine extraction for pressure management during CO 2 sequestration

Large-scale pressure increases resulting from carbon dioxide (CO 2 ) injection in the subsurface can potentially impact caprock integrity, induce reactivation of critically stressed faults, and drive CO 2 or brine through conductive features into shallow groundwater. Pressure management involving the extraction of native fluids from storage formations can be used to reduce such pressure increases. However, dealing with large volumes of extracted brine can be technically challenging and expensive. Selection of optimal well locations and pumping rates are critical for maximizing CO 2 storage and minimizing brine extraction during geologic CO 2 sequestration (GCS). Robust and efficient computerized algorithms combining reservoir models and optimization methods are needed to make proper decisions on well placement and pumping rates. This work presents a constrained differential evolution (CDE) algorithm for solving global optimization problems involving pressure management of GCS projects. Application of the CDE optimization methodology was demonstrated for a hypothetical CO 2 storage scenario in a deep sandstone reservoir in the Southern San Joaquin Basin in California, USA. Industrial-scale storage of CO 2 would generate significant pressure buildup in this formation, which in turn would raise concerns about induced seismicity due to presence of multiple faults surrounding the injection site. Through the CDE optimization algorithm coupled to a vertically-averaged reservoir simulator, we successfully estimated optimal solutions for brine extraction wells in the reservoir that would limit the local pressure along the faults to a prescribed threshold. Multiple realizations of the reservoir permeability field were created to understand the impact of reservoir heterogeneity on optimization results. Our results indicate that the reservoir slope and heterogeneity have significant impact on optimum extraction rates. Reservoir heterogeneity is also a significant factor for extraction well locations, suggesting that in practice decisions about extraction well placement through optimization should be made at later project stages when data from a few years of CO 2 injection have allowed iterative updating and refining of the reservoir forward models. Although the study focused on optimization of brine extraction, the CDE optimization methodology presented in this paper has also potential to solve other complex optimization problems related to GCS, such as increasing storage efficiency by enhancing injectivity and capillary and dissolution trapping.

58 GEOSCIENCES↗

Field-scale fault reactivation experiments by fluid injection highlight aseismic leakage in caprock analogs: Implications for CO 2 sequestration

Observations on tens-of-meter scale experiments of fault activation by fluid injection conducted in shales allow exploring how aseismic and seismic events may jeopardize the integrity of a sealing caprock overlying a CO 2 sequestration reservoir. We contrast the behavior of shale faults with another set of experiments conducted in carbonates. Significant fluid leakage occurs along the initially low-permeability shale faults when rupture is activated. Most of the leakage pathway closes when fluid injection ceases and fluid pressure drops. Dilatant slip on the fault plane alone does not explain the observed leakage behavior, which is also caused by fault opening favored by the softness of the shale, and by the structure of the fault zone that prevents fluids from diffusing into the adjacent damage zone. Experiments show a large amount of aseismic deformation. Small-magnitude seismicity (M w < -2.5) is observed outside the pressurized leakage patch. Stress transferred from this aseismic deformation patch can build up to stress-criticality and favor seismicity. Thus, in terms of fault activation in caprocks, aseismic fault slip leading to increased permeability and a loss of seal integrity is of great concern.

58 GEOSCIENCES↗

Enabling site-specific well leakage risk estimation during geologic carbon sequestration using a modular deep-learning-based wellbore leakage model

Geologic carbon sequestration (GCS) is a promising technology for mitigating net carbon emissions and growing climate concern by storing CO 2 in reservoirs. Oil and gas brownfields are an attractive option for CO 2 storage, but these sites have many historical wellbores from petroleum production and can be a potential leakage pathway for CO 2 or formation brine. Therefore, risk management of GCS operations requires an assessment of potential well leakage. Due to the high uncertainty of the system, stochastic approaches are ideal for quantifying the range of risk behaviors, but they must be computationally efficient in the face of complex physics. Here, we develop a new physics-centric deep learning wellbore model to predict the leakage of CO 2 and brine through leaky wellbores. Multi-physics numerical simulations were used to generate data sets, and physics-informed features were introduced. Neural networks were optimized with an automated searching algorithm. Feature analysis quantifies the impact of each feature on model prediction and confirms the role of physics-inspired parameters. The model shows high predictive performance across a wide range of geologic and injection conditions and well attributes. In conclusion, a case study illustrates how the model is applied to assess well leakage in GCS operations.

58 GEOSCIENCES↗

Optimization of well design and CO 2 injection strategy for risk reduction in Class VI geological carbon sequestration wells

The safety and durability of Class VI wells are critical for geological carbon sequestration (GCS). However, current GCS operations face unique challenges: unlike traditional Class II wells, Class VI CO 2 injection wells operate at rates up to 100 times higher, dramatically increasing the risk of wellbore leakage and structural compromise due to severe temperature drops and associated mechanical stresses. Despite existing guidelines on material selection, there remains a substantial gap in understanding how rapid CO 2 injection rates, low surface temperatures, and variable reservoir conditions interact to threaten long-term well integrity. This study presents a comprehensive, original workflow integrating advanced analytical and numerical models for both well flow and well integrity analysis. By systematically simulating a wide range of field-relevant scenarios—including variations in injection rate, CO 2 temperature, and reservoir pressure—this work provides the first cross-validated assessment of cooling effects on wellbore. The results reveal that extreme temperature drops, up to 60 °C, can occur under high injection rates, particularly in depleted reservoirs, significantly increasing the risk of cement failure. Building on these insights, the study proposes innovative, practical well design and operational strategies, including ductile cement formulations, pre-stressing techniques, advanced insulation coatings, and proactive management of injection rates. The safety of Class VI well extends beyond simply using CO 2 resistant materials. Cement materials should possess optimal thermo-hydraulic-mechanical-chemical properties for effective performance. This work provides a scientific basis for optimizing Class VI well designs, with direct benefits for minimizing environmental risk, lowering operational costs, and enhancing the long-term reliability of GCS.

25 ENERGY STORAGE↗

Carbon sequestration in the uplands of Eastern China: an analysis with high-resolution model simulations

Using the DeNitrification-DeComposition (DNDC, version 9.5) model, we investigated the soil organic carbon (SOC) changes from 1980 to 2009 in Eastern China's upland-crop fields (3.7% of the land area of China) in northern Jiangsu Province. A currently most detailed high-resolution soil database, containing 17,024 polygons at a scale of 1:50,000, derived from 983 unique upland soil profiles, was used. A coarser county-level soil database was also used for a pair-wise simulation for comparison. We found that SOC changes modeled with the county-level soil database differ significantly from those with high-resolution soil data, with the deviation ranging from -64% to 8.0% in different counties. This implies that coarse soil data may lead to large biases in SOC simulation. With the high-resolution database, the model estimates a SOC increase of 37.89 Tg C in the top soils (0-50 cm) over the study area of 3.93 Mha for the past three decades, with an average rate of 322 kg C ha-1 year-1. The SOC accumulation in the study region accounts for 10.2% of annual national carbon sequestration, underscoring its significance to national climate mitigation. The annual SOC change varied between 61 to 519 kg C ha-1 year-1, mainly driven by the variations in N-fertilizer and manure applications. This study highlights the significance of high-resolution soil databases in quantifying SOC changes. Our high-resolution estimates of SOC will support farming and carbon management in this region.

Zhang, Liming↗

Reduction of exportin 6 activity leads to actin accumulation via failure of RanGTP restoration and NTF2 sequestration in the nuclei of senescent cells

We have previously reported that G-actin accumulation in nuclei is a universal phenomenon of cellular senescence. By employing primary culture of human diploid fibroblast (HDF) and stress-induced premature senescence (SIPS), we explored whether the failure of actin export to cytoplasm is responsible for actin accumulation in nuclei of senescent cells. Expression of exportin 6 (Exp6) and small G-protein, Ran, was significantly reduced in the replicative senescence, but not yet in SIPS, whereas nuclear import of actin by cofilin was already increased in SIPS. After treatment of young HDF cells with H{sub 2}O{sub 2}, rapid reduction of nuclear RanGTP was observed along with cytoplasmic increase of RanGDP. Furthermore, significantly reduced interaction of Exp6 with RanGTP was found by GST-Exp6 pull-down analysis. Failure of RanGTP restoration was accompanied with inhibition of ATP synthesis and NTF2 sequestration in the nuclei along with accordant change of senescence morphology. Indeed, knockdown of Exp6 expression significantly increased actin molecule in the nuclei of young HDF cells. Therefore, actin accumulation in nuclei of senescent cells is most likely due to the failure of RanGTP restoration with ATP deficiency and NTF2 accumulation in nuclei, which result in the decrease of actin export via Exp6 inactivation, in addition to actin import by cofilin activation.

60 APPLIED LIFE SCIENCES↗

Design and Application of Materials for Sequestration and Immobilization of 99 Tc

99 Technetium ( 99 Tc) is a hazardous radionuclide generated by the nuclear industry that poses a serious environmental threat. The wide variation and complex chemistries of nuclear waste streams containing 99 Tc often create unique, site specific challenges when sequestering and immobilizing the waste in a matrix suitable for long-term storage and disposal. Therefore, an effective management plan for 99 Tc containing radioactive waste will likely require a variety of suitable materials/matrices capable of adapting to and addressing these challenges. In this review, we discuss and highlight the key developments for effective removal and immobilization of 99 Tc in inorganic waste forms. Specifically, we review the synthesis, characterization, and application of materials for targeted removal of 99 Tc from (simulated) waste solutions under various experimental conditions. These materials include: i) layered double hydroxides (LDHs), ii) metal-organic frameworks (MOFs), iii) ion-exchange resins (IERs) as well as cationic organic polymers (COPs), and iv) surface modified natural clay materials (SMCMs). Secondly, we discuss some of the major and recent developments towards 99 Tc immobilization in i) glass, ii) cement, and iii) iron mineral waste forms. Finally, we present future challenges that need to be addressed for the design, synthesis, and selection of suitable matrices for the efficient sequestration and immobilization of 99 Tc from targeted wastes. Finally, the purpose of this review is to inspire the researches on the design and application of various suitable materials/matrices for selective removal of 99 Tc present globally in different radioactive wastes and its immobilization in stable/durable waste forms.

36 MATERIALS SCIENCE↗

Homogeneous and Heterogeneous (Fex, Cr1-x)(OH)3 Precipitation: Implications for Cr Sequestration

The formation of (Fe, Cr)(OH)3 nanoparticles determines the fate of aqueous Cr in many aquatic environments. Using small angle X-ray scattering, precipitation rates of (Fe, Cr)(OH)3 nanoparticles in solution and on quartz were quantified from 0.1 mM Fe(III) solutions containing 0 – 0.25 mM Cr(III) at pH = 3.7 ± 0.2. Concentration ratio of aqueous Cr(III)/Fe(III) controlled the chemical composition (x) of (Fex, Cr1-x)(OH)3 precipitates, solutions’ supersaturation with respect to precipitates, and the surface charge of quartz. Therefore, aqueous Cr(III)/Fe(III) ratio affected homogeneous (in solution) and heterogeneous (on quartz) precipitation rates of (Fex, Cr1-x)(OH)3 through different mechanisms. The sequestration mechanisms of Cr(III) in precipitates were also investigated. In solutions with high aqueous Cr(III)/Fe(III) ratios, surface enrichment of Cr(III) on the precipitates occurred, resulting in slower particle growth in solution. From solutions with 0 – 0.1 mM Cr(III), the particles on quartz grew from 2 to 4 nm within 1 h. Interestingly, from solution with 0.25 mM Cr(III), particles of two distinct sizes (2 and 6 nm) formed on quartz, and their sizes remained unchanged throughout the reaction. Our study provided new insights on homogeneous and heterogeneous precipitation of (Fex, Cr1-x)(OH)3 nanoparticles, which can help determine the fate of Cr in aquatic environments.

GISAXS↗

Sequestration of U(VI) from Acidic, Alkaline, and High Ionic-Strength Aqueous Media by Functionalized Magnetic Mesoporous Silica Nanoparticles: Capacity and Binding Mechanisms

Uranium(VI) exhibits little adsorption onto sediment minerals in acidic, alkaline or high ionic-strength aqueous media that often occur in U mining or contaminated sites, which makes U(VI) very mobile and difficult to sequester. In this work, magnetic mesoporous silica nanoparticles (MMSNs) were functionalized with several organic ligands. The functionalized MMSNs were highly effective and had large binding capacity for U sequestration from high salt water (HSW) simulant (54 mg U/g sorbent). The functionalized MMSNs, after U exposure in HSW simulant, pH 3.5 and 9.6 artificial groundwater (AGW), were characterized by a host of spectroscopic methods. Among the key novel findings in this work was that in the HSW simulant or high pH AGW, the dominant U species bound to the functionalized MMSNs were uranyl or uranyl hydroxide, rather than uranyl carbonates as expected. The surface functional groups appear to be out-competing the carbonate ligands associated with the aqueous U species. The uranyl-like species were bound with N ligand as η 2 bound motifs or phosphonate ligand as a monodentate, as well as on tetrahedral Si sites as an edge-sharing bidentate. Conclusively, the N and phosphonate ligand-functionalized MMSNs hold promise as effective sorbents for sequestering U from acidic, alkaline or high ionic-strength contaminated aqueous media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alizarin Multilayers Adsorbed onto Glassy Carbon Electrodes for Electrochemical Sequestration of Manganese, Sodium, and Lithium Cations

The development of efficient methods for metal ion recovery and water remediation is critical for addressing the nation’s urgent need for secure domestic supply chains, overcoming critical materials challenges, and ensuring resilient manufacturing. Here, we present a novel approach for synthesizing stable Alizarin (Alz, 1,2-dihydroxy anthraquinone) multilayers on glassy carbon electrodes (GCEs) for electrochemical sequestration of manganese, sodium, and lithium cations. Alz-GCEs exhibit negatively shifted reduction potentials, indicating strong interactions between Alz and metal cations through metal-coupled electron transfer (MCET) mechanisms. The cation binding interactions and redox behavior of these electrodes were investigated using cyclic voltammetry (CV) and density functional theory (DFT) calculations. Our results demonstrate that Alz forms multilayer structures on GCEs with redox properties that are modulated by the presence of metal cations in the electrolyte. DFT calculations provide insights into the electrochemical mechanism, indicating both stepwise and concerted pathways for metal binding. The findings highlight the potential of Alz-GCEs for efficient and selective metal ion capture, which could be useful for developing sustainable materials for critical metal recovery and water remediation. This work suggests that redox-mediated organic adlayers are promising candidates for advancing electrochemical separation technologies of metal ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusivity of Carbon Dioxide in Aqueous Solutions under Geologic Carbon Sequestration Conditions

Accurate assessment of the long-term security of geologic carbon sequestration requires knowledge of the mobility of carbon dioxide in brines under pressure and temperature conditions that prevail in subsurface aquifers. In this paper, we report Raman spectroscopic measurements of the rate of CO 2 diffusion in water and brines as a function of pressure, salinity, and concentration of CO 2 . In pure water at 50 ± 2 °C and 90 ± 2 bar, we find the diffusion coefficient, D, to be (3.08 ± 0.03) × 10 –9 m 2 /s, a value that is consistent with a recent microfluidic study but lower than earlier PVT measurements. Under reservoir conditions, salinity affects the mobility of CO 2 significantly and D decreased by 45% for a 4 M solution of NaCl. We find significant differences of diffusivity of CO 2 in brines (0–4 M NaCl), in both the absolute values and the trend compared to the Stokes–Einstein prediction under our experimental conditions. Finally, we observe that D decreases significantly at the high CO 2 concentrations expected in subsurface aquifers (~15% reduction at 0.55 mol/kg of CO 2 ) and provides an empirical correction to the commonly reported D values that assume a tracer concentration dependence on diffusivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequestration of Radionuclides in Metal–Organic Frameworks from Density Functional Theory Calculations

The high porosity, modularity, and synthetic diversity of metal-organic frameworks (MOFs) make them attractive candidate materials for selective sensing, separation, and sequestration of the radionuclides present in the nuclear wastes. Here, we use Density Functional Theory (DFT) calculations to determine the favorability of ion-exchange at the metal node of Tc, U, Th, Am, and Cm in Zr-, U-, and Th-based MOF clusters. A range of DFT methods, including several exchange-correlation functionals, DFT+U technique, relativistic effects, and magnetic effects are employed to establish robustness in the results. We also explore various reference states of ions including the vacuum, continuum water medium and explicit water molecules surrounding ions. Substitution of Tc, Am, Cm, and Th is believed to be energetically favorable in all the MOFs using ions surrounded by explicit water molecules as a reference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local Chain Dynamics in Sequence-Controlled Polymers as a Tunable Handle for Rare Earth Sequestration

Chain dynamics govern the intricate behaviors of proteins, underpinning functions such as catalysis, recognition, and stimulus response, and are an increasingly appreciated aspect of structure–function relationships. Analogously, manipulating chain dynamics and structure in abiotic polymers via sequence control is an exciting, yet underexplored, strategy for improving material functions. In this work, we report a systematic study relating the sequence of polymeric sequestrants to their structure and dynamics, as well as to their binding affinity and selectivity for model substrates, rare earth elements (REEs). A series of sequence-controlled polymers with metal chelating, solubilizing, and structure forming monomers was synthesized via multiblock polymerization, yielding compositionally identical polymers with spectroscopically resolved domains and distinct morphologies. Using a combination of small-angle X-ray scattering and 19 F NMR relaxometry measurements, we connected differences in polymer structure and dynamics to polymer sequence variables such as the patchiness (density) of the structure forming monomer and the location of the chelating monomer. Furthermore, we found that, relative to calcium, all polymers in the series collapse more and have slower dynamics when binding REEs (lanthanum and lutetium) , though the extent of these effects were sequence-dependent and localized to specific domains within the polymer. Notably, sequence-controlled polymers that exhibited the largest conformational and dynamic changes upon binding REEs also bound REEs with the greatest affinity and modest selectivity. Collectively, these results correlate monomer patterning with dynamics, morphology, and REE binding performance en route to the development of efficient and selective macromolecular chelators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polycation Binders: An Effective Approach toward Lithium Polysulfide Sequestration in Li–S Batteries

Lithium polysulfide sequestration by polymeric binders in lithium-sulfur battery cathodes is investigated in this study. We prove polycations can effectively adsorb lithium polysulfides via Coulombic attraction between the positively charged backbone and the polysulfide anions. For the first time, we measure the simultaneous mass change of the sulfur cathodes with poly(diallyldimethylammonium triflate) (PDAT) and polyvinylpyrrolidone (PVP) binders during Iithiation-delithiation using electrochemical quartz crystal microbalance (EQCM). The EQCM results demonstrate significantly higher mass gain with PDAT binder under identical conditions, providing direct evidence that PDAT is a superior binder. The advantage of polycation binders is also proved by charge-discharge cycling combined with ultraviolet-visible spectroscopy and X-ray photoelectron spectroscopy. As a result, with the PDAT binder and minimized electrolyte/sulfur weight ratio, we further demonstrate electrodes with high sulfur loading achieving 4.2 mAh cm -2 areal capacity.

25 ENERGY STORAGE↗

Direct Air Capture and Sequestration of CO 2 by Accelerated Indirect Aqueous Mineral Carbonation under Ambient Conditions

Mineralization of gaseous carbon dioxide into solid carbonates using alkaline industrial residues such as coal fly ash has a dual advantage of reducing the carbon dioxide footprint of coal power plants and improving ash utilization. However, the slow mineral carbonation rate under atmospheric conditions is a major challenge, especially when using natural minerals or industrial residues for direct air capture (DAC) of CO 2 . In this study, using coal fly ash samples and concentrated alkali carbonate aqueous solutions as a recyclable solvent, we show the feasibility of coupling mineral carbonation with DAC under atmospheric conditions. Findings show that carbonation efficiency is best under alkaline conditions, achieving as high as ~80% conversion to calcium carbonates within 1 h in a 1.9 M sodium carbonate solution. Based on the experimental results, a process coupling DAC and mineral carbonation that operates entirely under ambient conditions is proposed. Here, the techno-economic and life cycle assessments for the proposed process project a levelized cost of $\$116$–133/t-CO 2 -sequestered (US $\$2019$) and process carbon emissions (GWP) in the range of 0.03–0.25 t-CO 2 e/t-CO 2 -sequestered. Considering the low cost, simplicity, and gigaton-scale sequestration potential, we believe that DAC based on alkaline industrial residue carbonation can be considered a “low-hanging fruit” in the pursuit of negative emissions to combat climate change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Imaging Wellbore Cement Degradation by Carbon Dioxide under Geologic Sequestration Conditions Using X-ray Computed Microtomography

ABSTRACT: X-ray microtomography (XMT), a nondestructive three-dimensional imaging technique, was applied to demonstrate its capability to visualize the mineralogical alteration and microstructure changes in hydrated Portland cement exposed to carbon dioxide under geologic sequestration conditions. Steel coupons and basalt fragments were added to the cement paste in order to simulate cement-steel and cement-rock interfaces. XMT image analysis showed the changes of material density and porosity in the degradation front (density: 1.98 g/cm3, porosity: 40%) and the carbonated zone (density: 2.27 g/cm3, porosity: 23%) after reaction with CO2- saturated water for 5 months compared to unaltered cement (density: 2.15 g/cm3, porosity: 30%). Three-dimensional XMT imaging was capable of displaying spatially heterogeneous alteration in cement pores, calcium carbonate precipitation in cement cracks, and preferential cement alteration along the cement-steel and cement-rock interfaces. This result also indicates that the interface between cement and host rock or steel casing is likely more vulnerable to a CO2 attack than the cement matrix in a wellbore environment. It is shown here that XMT imaging can potentially provide a new insight into the physical and chemical degradation of wellbore cement by CO2 leakage.

Imaging Wellbore Cement Degradation by Carbon Diox↗

Potential Impacts of Electric Power Production Utilizing Natural Gas, Renewables and Carbon Capture and Sequestration on U.S. Freshwater Resources

Carbon capture and sequestration (CCS) has important implications relative to future thermoelectric water use. A bounding analysis is performed using past greenhouse gas emission policy proposals and assumes either all effected capacity retires (lower water use bound) or is retrofitted (upper bound). The analysis is performed in the context of recent trends in electric power generation expansion, namely high penetration of natural gas and renewables along with constrained cooling system options. Results indicate thermoelectric freshwater withdrawals nationwide could increase by roughly 1% or decrease by up to 60% relative to 2009 levels, while consumption could increase as much as 21% or decrease as much as 28%. To identify where changes in freshwater use might be problematic at a regional level, electric power production has been mapped onto watersheds with limited water availability (where consumption exceeds 70% of gauged streamflow). Results suggest that between 0.44 and 0.96 Mm3/d of new thermoelectric freshwater consumption could occur in watersheds with limited water availability, while power plant retirements in these watersheds could yield 0.90 to 1.0 Mm3/d of water savings.

54 ENVIRONMENTAL SCIENCES↗