Search NASA⌕ Search

SEARCH · Search NASA

Results for “stable carbon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Complementary Electrolyte Design for Li Metal Batteries in Electric Vehicle Applications

In this report a complementary electrolyte system with 0.8 M lithium bis(fluorosulfonylimide) (LiFSI) salt and 2 wt % lithium perchlorate (LiCLO4) additive in fluoroethylene carbonate (FEC)/ethyl methyl carbonate (EMC) solution enables not only stable cycling of lithium metal batteries (LMBs) with practical loading (<30 μm lithium anode, cathode loading > 4 mAh/cm 2 ) but also outstanding degradation stability toward the end of cycle life when compared to the conventional electrolyte. Although the use of LiFSI salt can increase the electrolyte conductivity and lengthen the cycle life of LMBs, the aged lithium anode morphology formed by the sacrificial decomposition of LiFSI is highly porous, leading to an abrupt cell capacity drop toward the end of cycling. Moreover, the inability to stop aluminum corrosion by the LiFSI-based electrolyte also causes cracking of the cathode tab during prolonged cycling. It is observed that a highly porous aged lithium consumed electrolyte at a higher rate, leading to the dry-out of electrolyte solvents. On the contrary, dense aged lithium anode morphology increased the localized current applied on the lithium, causing the formation of lithium dendrite. Thus, porosity control is the key to enhance battery performance. In this complementary system, LiClO 4 was introduced as an advanced additive to not only improve the capacity retention rate but also mitigate the abrupt capacity drop toward the end of cycle life because LiClO 4 acted as a pore astringent reducing the porosity of the aged lithium metal anode to the desired level. Moreover, the addition of LiClO 4 can also suppress the AI corrosion, allowing stable high-voltage cycling of LMBs. The synergistic effect of combining LiFSI salt and a LiClO 4 additive leads to an electrolyte system that can facilitate the application of high-energy LMBs with practical electrode loading.

25 ENERGY STORAGE↗
DOE OSTI2020

Enabling Highly Stable Li–O 2 Batteries with Full Discharge–Charge Capability: The Porous Binder- and Carbon-Free IrNi Nanosheet Cathode

Rechargeable aprotic Li-O 2 batteries have drawn much attention in light of their ultrahigh theoretical energy density. However, the sluggish kinetics of oxygen cathode reactions lead to huge energy loss, while the unfavorable side reactions associated with the widely used carbon and binder account for fast battery decay during cycles. In this work, hierarchically holey IrNi alloy nanosheets are facilely designed on Ni foam substrate as a freestanding, binder- and carbon-free cathode to address these challenges. The IrNi nanosheets consist of numerous interconnected nanoparticles, forming abundant nanoholes, benefiting active-site exposure. Moreover, the meso-/macropores pave channels for the transfer of oxygen and lithium ions and provide enough accommodation for the insoluble Li 2 O 2 product. The corresponding Li-O 2 batteries demonstrate low polarization and excellent cycle stability with full discharge/charge capability (up to 292 cycles at a current density of 0.2 mA cm -2 within a voltage range from 2.3 to 4.3 V). The long-term cycling performance is principally attributed to the exclusive catalytic stability of the holey IrNi nanosheets and its good compatibility with dimethyl sulfoxide-based electrolyte. Our research provides novel insights into the design of robust and freestanding porous cathodes for high energy density Li-O 2 batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Microbes and Climate Change: a Research Prospectus for the Future

Climate change is the most serious challenge facing humanity. Microbes produce and consume three major greenhouse gases—carbon dioxide, methane, and nitrous oxide—and some microbes cause human, animal, and plant diseases that can be exacerbated by climate change. Hence, microbial research is needed to help ameliorate the warming trajectory and cascading effects resulting from heat, drought, and severe storms. We present a brief summary of what is known about microbial responses to climate change in three major ecosystems: terrestrial, ocean, and urban. We also offer suggestions for new research directions to reduce microbial greenhouse gases and mitigate the pathogenic impacts of microbes. These include performing more controlled studies on the climate impact on microbial processes, system interdependencies, and responses to human interventions, using microbes and their carbon and nitrogen transformations for useful stable products, improving microbial process data for climate models, and taking the One Health approach to study microbes and climate change.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Microbial ecology and biogeochemistry of hypersaline sediments in Orca Basin

In deep ocean hypersaline basins, the combination of high salinity, unusual ionic composition and anoxic conditions represents significant challenges for microbial life. We used geochemical porewater characterization and DNA sequencing based taxonomic surveys to enable environmental and microbial characterization of anoxic hypersaline sediments and brines in the Orca Basin, the largest brine basin in the Gulf of Mexico. Full-length bacterial 16S rRNA gene clone libraries from hypersaline sediments and the overlying brine were dominated by the uncultured halophilic KB1 lineage, Deltaproteobacteria related to cultured sulfate-reducing halophilic genera, and specific lineages of heterotrophic Bacteroidetes. Archaeal clones were dominated by members of the halophilic methanogen genus Methanohalophilus, and the ammonia-oxidizing Marine Group I (MG-I) within the Thaumarchaeota. Illumina sequencing revealed higher phylum- and subphylum-level complexity, especially in lower-salinity sediments from the Orca Basin slope. Illumina and clone library surveys consistently detected MG-I Thaumarchaeota and halotolerant Deltaproteobacteria in the hypersaline anoxic sediments, but relative abundances of the KB1 lineage differed between the two sequencing methods. The stable isotopic composition of dissolved inorganic carbon and methane in porewater, and sulfate concentrations decreasing downcore indicated methanogenesis and sulfate reduction in the anoxic sediments. While anaerobic microbial processes likely occur at low rates near their maximal salinity thresholds in Orca Basin, long-term accumulation of reaction products leads to high methane concentrations and reducing conditions within the Orca Basin brine and sediments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Exploration of Fuel Property Impacts on the Combustion of Late Post Injections Using Binary Blends and High-Reactivity Ether Bioblendstocks

In this study, the impacts of fuel volatility and reactivity on com- bustion stability and emissions were studied in a light-duty single- cylinder research engine for a three-injection catalyst heating oper- ation strategy with late post-injections. N-heptane and blends of farnesane/2,2,4,4,6,8,8-heptamethylnonane were used to study the im- pacts of volatility and reactivity. The effect of increased chemical reac- tivity was also analysed by comparing the baseline #2 diesel operation with a pure blend of mono-ether components (CN > 100) representa- tive of potential high cetane oxygenated bioblendstocks and a 25 vol.% blend of the mono-ether blend and #2 diesel with a cetane number (CN) of 55. At constant reactivity, little to no variation in combustion performance was observed due to differences in volatility, whereas in- creased reactivity improved combustion stability and efficiency at late injection timings. Fuels with higher reactivity were found to reduce engine-out hydrocarbon and carbon monoxide emissions while also achieving stable combustion at post-injection timings later than those achievable with #2 diesel fuel. The pure ether blend had the latest achievable post-injection timing of +30.5 CAD while still maintaining stable combustion (coefficient of variation of gross-indicated mean ef- fective pressure < 5%). With post-injection timing adjusted to achieve a matched exhaust temperature of 300 °C, the ether-diesel CN 55 blend was observed to have slightly higher thermal efficiency in comparison to the baseline #2 diesel fuel. The results also indicate that cetane num- ber may serve as a good indicator of combustion characteristics at late injection timings used for aftertreatment thermal management opera- tion.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2026

Engineering Synthetic Anaerobic Consortia Inspired by the Rumen for Biomass Breakdown and Conversion

Lignocellulosic plant biomass is a widely-abundant renewable resource that can be harnessed for value-added production of fuels & chemicals. While microbes have been engineered to breakdown lignocellulose and turn released sugars into products, this remains an energy-intensive process that requires expensive pre-treatment and separation steps. Furthermore, it is difficult to engineer all desirable traits for breakdown and conversion into one organism. This project developed a new strategy that relies on microbial partnerships formed in the herbivore rumen to liberate sugars from crude plant biomass and convert that sugar to value-added chemicals. Microbial consortia consisting of fungi, bacteria, and archaea form tight associations in the herbivore rumen, which divide-and-conquer the difficult tasks of biomass breakdown. This project leveraged a “synthetic rumen” consortium composed of anaerobic fungi and chain-elongating bacteria to study which metabolites are shared and exchanged between microbes and identify strategies to bolster lignocellulose conversion to value-added products. Our approach developed high-throughput systems and synthetic biology approaches to realize stable synthetic consortia that route lignocellulosic carbon into short and medium chain fatty acids (SCFAs/MCFAs) rather than methane. Key research objectives were to (1) design and predict anaerobic fungal and bacterial consortia that efficiently convert lignocellulosic biomass into medium-chain fatty acids (MCFAs), (2) understand how fermentation parameters and microbe-microbe interactions regulate and drive microbiome metabolic fluxes, and (3) use genomic editing to alter the fermentation byproducts of anaerobic fungi and bolster MCFA titers and yields.

09 BIOMASS FUELS↗
DOE OSTI2020

SPRUCE Soil Metabolome Responses to Whole Ecosystem Warming in SPRUCE Experimental Plots Beginning in 2016

This dataset reports a suite of complementary environmental geochemical analyses of peat extracts and porewater samples from SPRUCE experimental plots across a range of whole ecosystem warming (WEW) temperature treatments beginning in 2016. Results of peat extract analyses include NMR and GC-MS analyses of central metabolites, liquid chromatography mass spectra (LC-MS) analyses of lipids, and quantitative proteomics. Porewater was analyzed by FTICR-MS for secondary metabolites, and for carbon dioxide (CO2), methane (CH4) concentrations, stable isotope composition, and the differential solubility corrected CO2:CH4 ratio. This dataset contains six files in comma separated (*.csv) format.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Exploration of Fuel Property Impacts on the Combustion of Late Post Injections Using Binary Blends and High-Reactivity Ether Bioblendstocks

In this study, the impacts of fuel volatility and reactivity on combustion stability and emissions were studied in a light-duty single-cylinder research engine for a three-injection catalyst heating operation strategy with late post-injections. Here, N-heptane and blends of farnesane/2,2,4,4,6,8,8-heptamethylnonane were used to study the impacts of volatility and reactivity. The effect of increased chemical reactivity was also analysed by comparing the baseline #2 diesel operation with a pure blend of mono-ether components (CN > 100) representative of potential high cetane oxygenated bioblendstocks and a 25 vol.% blend of the mono-ether blend and #2 diesel with a cetane number (CN) of 55. At constant reactivity, little to no variation in combustion performance was observed due to differences in volatility, whereas increased reactivity improved combustion stability and efficiency at late injection timings. Fuels with higher reactivity were found to reduce engine-out hydrocarbon and carbon monoxide emissions while also achieving stable combustion at post-injection timings later than those achievable with #2 diesel fuel. The pure ether blend had the latest achievable post-injection timing of +30.5 CAD while still maintaining stable combustion (coefficient of variation of gross-indicated mean effective pressure < 5%). With post-injection timing adjusted to achieve a matched exhaust temperature of 300 °C, the ether-diesel CN 55 blend was observed to have slightly higher thermal efficiency in comparison to the baseline #2 diesel fuel. The results also indicate that cetane number may serve as a good indicator of combustion characteristics at late injection timings used for aftertreatment thermal management operation.

09 BIOMASS FUELS↗
NASA NTRS1994

Investigation of a laboratory candidate for the carrier of the 4430 A diffuse interstellar band

The 4430 A diffuse interstellar band (DIB) is unique among DIB's in that as one of the strong bands, it is the bluest strong band with no others observed at shorter wavelengths. This position at the edge of the DIF 'forrest' suggests it may be the easiest to replicate in the laboratory. In earlier experiments (Wdowiak 1980) an interesting candidate using a gas discharge followed by cryogenic matrix isolation was produced, and this report details its further investigation. This absorption feature, produced when 1 part CH4 in 200 parts Ar is discharged and frozen out approximately 10 K, is at a wavelength of 4500 A in the argon matrix. Our recent experiments strongly indicate it is due to a carbon-based reactive species that is stable against mercury vapor UV radiation, and not likely to be from a contaminant. The effect of matrix shift can be estimated by considering the blueward shift between Ar and Ne matrices in the cases of the pyrene and C60 cations. This suggests that a shift from 4500 A for an Af matrix to the vicinity of 4300 A for a Ne matrix and the gas phase is not unreasonable. A liquid He cooled Ne matrix isolation experiment was prepared to determine the wavelength of the feature in that matrix. Replacing CH4 with C2H2 results in an equivalent absorption due to C3, greatly diminished absorptions from C2 and Ch, and no observable feature at 4500 A. To date our experiments indicate CH4 is a favored precursor for production of the reactive carrier of the 4500 A feature. Perhaps C2H2 is not suitable because of its tendency to polymerize easily in the discharge.

Wdowiak, Thomas J.↗
NASA NTRS1994

Carbonate-sulfate volcanism on Venus?

Venusian canali, outflow channels, and associated volcanic deposits resemble fluvial landforms more than they resmeble volcanic features on Earth and Mars. Some canali have meandering habits and features indicative of channel migration that are very similar to meandering river channels and flood plains on Earth, venusian outflow channels closely resemble water-carved outflow channels on Mars and the Channeled Scabland in Washington, collapsed terrains at the sources of some venusian channels resemble chaotic terrains at the sources of martian outflow channels, venusian lava deltas are similar to bird's-foot deltas such as the Mississippi delta, and venusian valley networks indicate sapping. We have developed an alternative possibility that the lava had a water-like rheology and a melting point slightly greater than Venus' surface temperature, thus accounting for the unusual behavior of the lava. Unlike silicate lavas, some carbonatites (including carbonate-sulfate-rich liquids) have these properties; thus they can flow great distances while retaining a high fluidity, significant mechanical erosiveness, and substantial capacity to transport and deposit sediment. Venusian geochemistry and petrology are consistent with extensive eruptions of carbonatite lavas, which could have crustal and/or mantle origins. Venus' atmosphere (especially CO2, HCl, and HF abundances) and rocks may be in local chemical equilibrium, which suggests that the upper crust contains large amounts of calcite, anhydrite, and other salts. Chemical analyses indicate, according to some models, that Venusian rocks may contain 4-19% calcite and anhydrite. Mixtures of crustal salts could melt at temperatures a few tens to a few hundred Kelvins higher than Venus' surface temperature; hence, melting may be induced by modest endogenetic or impact heating. Salts may have many of the same geologic roles on Venus as water and ice have on Mars. A molten salt (carbonatite) 'aquifer' may exist beneath a few hundred meters to several kilometers of solidified salt-rich 'permafrost.' Many geologic features can be explained by carbonatite magmatism: (1) impact melting of crustal salts can explain crater outflows, (2) small, sustained eruptions from molten salt aquifers can explain sapping valleys, (3) large, sustained eruptions may explain canali and their flood plans, and (4) catastrophic outbursts amy have formed outflow channels and chaotic terrain. Landforms created by carbonate-rich lavas would be thermally stable on Venus' surface, though some minerals may weather to other solid substances.

Kargel, Jeffrey S.↗
NASA NTRSDate not supplied

Influences of Solar Irradiation and Aerosol Surface Area on Nitrous Acid Production in Western U.S. Wildfire Smoke

Biomass burning has been identified as a primary emission source for a host of gas and aerosol phase compounds which can damage environmental and human health. During FIREX-AQ collaborators from UNH, NASA Langley Aerosol Research Group Experiment (LARGE), and Brown University conducted measurements out of NASA Langley’s mobile laboratory during July and August of 2019. Nitrous acid (HONO) and nitric acid (HNO3) concentrations were measured at nominal 5-minute resolution using a dual mist chamber-ion chromatograph system resulting in approximately 1,200 total samples from five separate fires in the western US. Enhancement ratios between PM2.5 and carbon monoxide were used to discriminate between young and aged smoke plumes. Average HONO concentrations were significantly higher (P << 0.01) in young daytime compared to nighttime smoke while no statistical differences (P > 0.05) were observed between young and aged smoke during day or night. In daytime smoke from the Williams Flats fire (75 km SE of Spokane, WA on the Columbia River) UV-A irradiation was highly correlated with HONO to nitrogen dioxide (NO2) ratios; indicating that heterogenous NO2 to HONO conversion more than compensated for rapid photolytic loss of HONO. Black carbon (BC) may serve as a stable proxy for total available aerosol surface area in biomass burning plumes when total aerosol size distributions are unavailable. During the day HONO/NO2 is weakly correlated to BC when BC abundance exceeds 1 ug/m3 but at lower BC concentrations the relationship breaks down. At night this relationship was stronger, partly due to consistently high BC concentrations. These observations suggest that heterogenous conversion of NO2 to HONO on aerosol is a significant source of HONO in dense smoke plumes. In more diffuse smoke conversion on other surfaces (soil, foliage) becomes more important.

J. H. Kaspari↗
NASA NTRS1982

On the location of acid-hydrolysable carbon in lunar soil fines

Soil fines exposed on the lunar surface accumulate small metallic iron particles and solar wind-derived carbon. In previous work, it has been suggested that an intimate association exists between one particular carbon phase, hydrolysable carbon, and very fine iron droplets, where the carbon is in solid solution in the iron. The earlier hypothesis of a constant carbon in iron concentration across a broad range of droplet sizes is testable by combining hydrolysable carbon determinations with a variety of magnetic measurements sensitive to different droplet diameters. New measurements of ferromagnetic resonance response on density and magnetic separates from size fractions of soil 12023 are interpreted as evidence that hydrolysable carbon is preferentially associated with the larger, magnetically stable single-domain iron particles rather than with the smaller superparamagnetic droplets. For the former, there is a quite uniform ratio of iron to carbon both within a series of separates from a single soil, and among soils of widely varying FeO content.

Fallick, A. E.↗
NASA NTRS1999

Interchange for Joint Research Entitled: Miniature Laser Spectrometer for Stable Isotope Measurements

As a first step in successfully measuring carbon isotopes optically we have previously demonstrated the measurement of C-13/C-12 to a precision of 0.1% using a tunable diode laser and CO2 spectral lines in the 2300/cm spectral region. This precision of 0.1% (1 per mil) for carbon isotopes is a value sufficiently precise to provide important isotopic data of interest to astrobiologists. The precision presently attainable in gases is sufficient to permit our instrument to be used in the measurement of isotopic ratios of interest to astrobiologists as well as geologists and planetary scientists. A small stable isotope laser spectrometer with a 10 cm path gas cell was designed and constructed. The cell was integrated with a liquid nitrogen cooled tunable diode laser and indium antimonide detector for evaluation. Using the small gas cell, preliminary measurements of 13C/12C in CO2 were made employing single-beam sequential acquisitions of the required spectral data. The results indicate an accuracy of 0.1% which is sufficiently high to make meaningful measurements of martian samples. In addition, improvements in the spectrometer gas handling system have been made to markedly reduce C-13/C-12 isotopic fractionation during sample gas cell loading which we expect will lead to further improvements in precision and accuracy. An important part of making isotopic ratio measurements in solid samples using diode lasers is the conversion of the elements of interest to molecules that have absorption spectra in the mid-ir spectral range accessible by tunable diode lasers. In this project we have investigated the necessary sample preparation procedures to extract carbon, an element of astrobiological importance, from model soil compounds and to convert it to CO2, a molecule with appropriate optical absorption characteristics for reliable laser spectrometer isotopic ratio measurements of 13C/12C. We have considered calcium carbonate as a model for a component of the martian regolith, and we have formulated a simple heating protocol for extracting carbon in the form of CO2.

Becker, J. F.↗
DOE OSTI2023

The high pressure dependence of x-ray induced decomposition of cadmium oxalate

The high proclivity of x rays to destabilize and distort molecular structures has been previously utilized in the synthesis of novel compounds. Here, we show that x-ray induced decomposition of cadmium oxalate induces chemical and structural transformations only at 0.5 and 1 GPa. Using x-ray diffraction and Raman spectroscopy, the synthesized product is identified as cadmium carbonate with cadmium oxalate remnants, which is stable under ambient conditions. At ambient and >1 GPa pressures, only degradation of the electronic density distribution is observed. The transformation kinetics are examined in terms of Avrami’s model, which demonstrates that despite the necessity of high pressure for efficient x-ray induced synthesis of cadmium carbonate, the rate and geometry of structural synthesis in the 0.5–1 GPa pressure range do not depend on the applied pressure. In addition, the possible role of intermolecular distance and molecular mobility in transformation yield is also discussed. Our experimental results indicate that x-ray induced photochemical synthetic pathways can be modulated and optimized by specific parameter selection such as high pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nickel Sulfide-Nanowire-Filled Carbon Nanotubes as an Efficient Overall Water Splitting Electrocatalyst

Pursuing stable, efficient, and cost-effective nanostructured bifunctional electrocatalysts is crucial for advancing the electrochemical water splitting process and enabling clean hydrogen energy production. In recent years, considerable efforts have focused on developing highly efficient and durable commercial electrocatalysts for the oxygen evolution reaction (OER) and overall water splitting (OWS). This research introduces an OWS electrocatalyst-nickel sulfide-filled carbon nanotubes grown on a carbon cloth substrate (Ni 3 S 2 @CNTs/CC), synthesized via a one-step in-situ process. The synergistic integration of metal sulfide (Ni 3 S 2 ) and carbon nanotubes provides abundant active sites for catalytic reactions, ensuring a robust composite nanostructure with enhanced durability. Furthermore, the electrocatalytic performance for OER and OWS has been significantly improved by a simple acid treatment to the electrocatalysts, which introduces physical and chemical defects, particularly oxygen functional groups (the acid-treated sample is termed as Ni 3 S 2 @CNTs/CC-AT). As OER electrocatalysts, Ni 3 S 2 @CNTs/CC and Ni 3 S 2 @CNTs/CC-AT present overpotentials of 304 and 200 mV, respectively, for achieving a current density of 10 mA/cm 2 in the OER process. Furthermore, for complete water splitting in 1.0 M KOH electrolyte, Ni 3 S 2 @CNTs/CC and Ni 3 S 2 @CNTs/CC-AT exhibit potentials of 1.63 and 1.44 V, respectively, to achieve a current density of 10 mA/cm 2 when employed as both anode and cathode. Moreover, Ni 3 S 2 @CNTs/CC and Ni 3 S 2 @CNTs/CC-AT demonstrate durable nature for 22 and 20 h durability in the OER and OWS processes, respectively, offering a promising alternative to ruthenium- and iridium-based electrocatalysts for electrochemical hydrogen production through water splitting. In conclusion, the in-situ synthesis method and acid treatment strategy described in this research are promising approaches to fabricating high-performance encapsulated carbon-nanotube-based electrocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Polydopamine-treated three-dimensional carbon fiber-coated separator for achieving high-performance lithium metal batteries

The development of safe and high-performance lithium (Li) metal anodes has been a challenging issue that has not been addressed for decades. In this study, we have developed a thermally stable polydopamine-treated three-dimensional (3D) carbon fiber-coated separator (P3D-CFS) using an economical and environment-friendly process. P3D-CFS has a conductive coating layer that is used as a 3D hosting structure, which does not cause morphological changes in the Li metal anode. As a result, the unit cells (LiMn2O4/Li metal) employing P3D-CFS improve the cycle performance and rate capability compared to commercial polyethylene (PE) separators. P3D-CFS maintained 83.1% of the initial discharge capacity at the 400th cycle, whereas bare PE maintains only 74.3% of the initial discharge capacity after the 250th cycle (C/2?=?0.5?mA?cm-2). P3D-CFS maintains 42.8% of the initial discharge capacity at a 7C rate (7?mA?cm-2), whereas only 0.19% is maintained by bare PE under the same condition. Owing to the thermally stable properties of P3D-CFS, the open-circuit voltage of the unit cells (LiMn2O4/graphite) that employed P3D-CFS is maintained for over 60?min?at 140?°C, whereas the unit cells that employed bare PE show a sudden voltage drop after only 3?min.

Oh, Jeonghun↗
DOE OSTI2020

Melting of Magnesium Borohydride under High Hydrogen Pressure: Thermodynamic Stability and Effects of Nanoconfinement

The thermodynamic stability and melting point of magnesium borohydride were probed under hydrogen pressures up to 1000 bar (100 MPa) and temperatures up to 400 °C. At 400 °C, Mg(BH4)2 was found to be chemically stable between 700 and 1000 bar H2, whereas under 350 bar H2 or lower pressures, the bulk material partially decomposed into MgH2 and MgB12H12. The melting point of solvent-free Mg(BH4)2 was estimated to be 367-375 °C, which was above previously reported values by 40-90 °C. Our results indicated that a high hydrogen backpressure is needed to prevent the decomposition of Mg(BH4)2 before measuring the melting point and that molten Mg(BH4)2 can exist as a stable liquid phase between 367 and 400 °C under hydrogen overpressures of 700 bar or above. The occurrence of a pure molten Mg(BH4)2 phase enabled efficient melt-infiltration of Mg(BH4)2 into the pores of porous templated carbons (CMK-3 and CMK-8) and graphene aerogels. Both transmission electron microscopy and small-angle X-ray scattering confirmed efficient incorporation of the borohydride into the carbon pores. The Mg(BH4)2@carbon samples exhibited comparable hydrogen capacities to bulk Mg(BH4)2 upon desorption up to 390 °C based on the mass of the active component; the onset of hydrogen release was reduced by 15-25 °C compared to the bulk. Importantly, melt-infiltration under hydrogen pressure was shown to be an efficient way to introduce metal borohydrides into the pores of carbon-based materials, helping to prevent particle agglomeration and formation of stable closo-polyborate byproducts.

White, James L.↗