Search NASA⌕ Search

SEARCH · Search NASA

Results for “stack sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Intermixing between HfO{sub 2} and GeO{sub 2} films deposited on Ge(001) and Si(001): Role of the substrate

Thermally driven atomic transport in HfO{sub 2}/GeO{sub 2}/substrate structures on Ge(001) and Si(001) was investigated in N{sub 2} ambient as function of annealing temperature and time. As-deposited stacks showed no detectable intermixing and no instabilities were observed on Si. On Ge, loss of O and Ge was detected in all annealed samples, presumably due to evolution of GeO from the GeO{sub 2}/Ge interface. In addition, hafnium germanate is formed at 600 deg. C. Our data indicate that at 500 deg. C and above HfO{sub 2}/GeO{sub 2} stacks are stable only if isolated from the Ge substrate.

36 MATERIALS SCIENCE↗

Theoretical study of time-resolved luminescence in semiconductors. I. Decay from the steady state

Time-resolved luminescence (TRL) is a non-destructive, non-invasive, and contactless characterization method. We studied TRL decay on semiconductor layers and thin film homostructures after a steady state illumination by simulation with Synopsys TCAD{sup ®} and by analytical approximate solution of the appropriate equations. First, we show that the luminescence decay time in general equals the minority carrier lifetime only for a homogeneous and time-independent carrier lifetime. Then, we investigate the influence of photon recycling, injection level, charge carrier diffusion, defects in the bulk and at the surfaces, as well as space charge on the TRL decay separately by quasi one-dimensional simulations of semiconductor layers and semiconductor homostructures. We further study the influence of sample non-homogeneity as may be found in polycrystalline semiconductors. We show how carrier lifetime can be extracted from the TRL transients and how the samples can be characterized by excitation dependent measurements in the open circuit case. We can explain some effects found in luminescence experiments, like a decrease of the decay time with an increasing excitation, a maximum in the decay time due to saturated bulk-defects and curved luminescence transients due to high injections or sample inhomogeneities. Furthermore, we are focussing on the question, how single layers within a semiconductor stack can be characterized.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

LENSING MAGNIFICATION: A NOVEL METHOD TO WEIGH HIGH-REDSHIFT CLUSTERS AND ITS APPLICATION TO SpARCS

We introduce a novel method to measure the masses of galaxy clusters at high redshift selected from optical and IR Spitzer data via the red-sequence technique. Lyman-break galaxies are used as a well-understood, high-redshift background sample allowing mass measurements of lenses at unprecedented high redshifts using weak lensing magnification. By stacking a significant number of clusters at different redshifts with average masses of {approx}(1-3) x 10{sup 14} M{sub sun}, as estimated from their richness, we can calibrate the normalization of the mass-richness relation. With the current data set (area: 6 deg{sup 2}) we detect a magnification signal at the >3{sigma} level. There is good agreement between the masses estimated from the richness of the clusters and the average masses estimated from magnification, albeit with large uncertainties. We perform tests that suggest the absence of strong systematic effects and support the robustness of the measurement. This method-when applied to larger data sets in the future-will yield an accurate calibration of the mass-observable relations at z {approx}> 1 which will represent an invaluable input for cosmological studies using the galaxy cluster mass function and astrophysical studies of cluster formation. Furthermore, this method will probably be the least expensive way to measure masses of large numbers of z > 1 clusters detected in future IR-imaging surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

An automated approach to the alignment of compound refractive lenses

Compound refractive lenses (CRLs) are established X-ray focusing optics, and are used to focus the beam or image the sample in many beamlines at X-ray facilities. While CRLs are quite established, the stack of single lens elements affords a very small numerical aperture because of the thick lens profile, making them far more difficult to align than classical optical lenses that obey the thin-lens approximation. This means that the alignment must be very precise and is highly sensitive to changes to the incident beam, often requiring regular readjustments. Some groups circumvent the full realignment procedure by using engineering controls ( e.g. mounting optics) that sacrifice some of the beam's focusing precision, i.e. spot size, or resolution. While these choices minimize setup time, there are clear disadvantages. This work presents a new automated approach to align CRLs using a simple alignment apparatus that is easy to adapt and install at different types of X-ray experiments or facilities. This approach builds on recent CRL modeling efforts, using an approach based on the Stochastic Nelder–Mead (SNM) simplex method. This method is outlined and its efficacy is demonstrated with numerical simulation that is tested in real experiments conducted at the Advanced Photon Source to confirm its performance with a synchrotron beam. This work provides an opportunity to automate key instrumentation at X-ray facilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Prospects for Astrobiology and Technosignature Searches with the Vera C. Rubin Observatory Legacy Survey of Space and Time

The Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) will map sources in multiband colour--variability space. We present a prototype coherence-based framework for astrobiology and technosignature searches, in which candidates are treated as structured departures from natural astrophysical manifolds rather than isolated photometric outliers. We illustrate the framework with three simulated cases: five Kuiper Belt Object (KBO) surface/activity states, a grid of 649 synthetic exoplanet spectra with vegetation-red-edge-like (VRE) perturbations, and 500 synthetic multiband light curves, each projected into LSST-like observable space and analysed through colour geometry, chromatic variability, and cross-band coherence. Key results include a full-colour Mahalanobis distance $D\approx5.1$ for the weak-coma KBO state (${\sim}5σ$ in the five-dimensional colour vector), an indicative VRE coherence threshold at $f_{\rm crit}\approx0.13$, and an idealised stacking forecast reaching $5σ$ under optimistic assumptions. We show, using a small Gaia~DR3 stellar sample, that stellar colour and photometric stability may inform the prioritisation of Galactic regions for applying such coherence diagnostics.

Kovačević, Andjelka B. [Belgrade U.] (ORCID:000000↗

Rapid determination of actinides in seawater samples

A new rapid method for the determination of actinides in seawater samples has been developed at the Savannah River National Laboratory. The actinides can be measured by alpha spectrometry or inductively-coupled plasma mass spectrometry. The new method employs novel pre-concentration steps to collect the actinide isotopes quickly from 80 L or more of seawater. Actinides are co-precipitated using an iron hydroxide co-precipitation step enhanced with Ti +3 reductant, followed by lanthanum fluoride co-precipitation. Stacked TEVA Resin and TRU Resin cartridges are used to rapidly separate Pu, U, and Np isotopes from seawater samples. TEVA Resin and DGA Resin were used to separate and measure Pu, Am and Cm isotopes in seawater volumes up to 80 L. This robust method is ideal for emergency seawater samples following a radiological incident. It can also be used, however, for the routine analysis of seawater samples for oceanographic studies to enhance efficiency and productivity. In contrast, many current methods to determine actinides in seawater can take 1–2 weeks and provide chemical yields of ~30–60 %. This new sample preparation method can be performed in 4–8 h with tracer yields of ~85–95 %. By employing a rapid, robust sample preparation method with high chemical yields, less seawater is needed to achieve lower or comparable detection limits for actinide isotopes with less time and effort.

61 RADIATION PROTECTION AND DOSIMETRY↗

DIFFUSE Ly{alpha} EMITTING HALOS: A GENERIC PROPERTY OF HIGH-REDSHIFT STAR-FORMING GALAXIES

Using a sample of 92 UV continuum-selected, spectroscopically identified galaxies with (z) = 2.65, all of which have been imaged in the Ly{alpha} line with extremely deep narrow-band imaging, we examine galaxy Ly{alpha} emission profiles to very faint surface brightness limits. The galaxy sample is representative of spectroscopic samples of Lyman break galaxies (LBGs) at similar redshifts in terms of apparent magnitude, UV luminosity, inferred extinction, and star formation rate and was assembled without regard to Ly{alpha} emission properties. Approximately 45% (55%) of the galaxy spectra have Ly{alpha} appearing in net absorption (emission), with {approx_equal} 20% satisfying commonly used criteria for the identification of 'Ly{alpha} emitters' (LAEs; W{sub 0}(Ly{alpha}) {>=} 20 A). We use extremely deep stacks of rest-UV continuum and continuum-subtracted Ly{alpha} images to show that all sub-samples exhibit diffuse Ly{alpha} emission to radii of at least 10'' ({approx}80 physical kpc). The characteristic exponential scale lengths for Ly{alpha} line emission exceed that of the {lambda}{sub 0} = 1220 A UV continuum light by factors of {approx}5-10. The surface brightness profiles of Ly{alpha} emission are strongly suppressed relative to the UV continuum light in the inner few kpc, by amounts that are tightly correlated with the galaxies' observed spectral morphology; however, all galaxy sub-subsamples, including that of galaxies for which Ly{alpha} appears in net absorption in the spectra, exhibit qualitatively similar diffuse Ly{alpha} emission halos. Accounting for the extended Ly{alpha} emission halos, which generally would not be detected in the slit spectra of individual objects or with typical narrow-band Ly{alpha} imaging, increases the total Ly{alpha} flux (and rest equivalent width W{sub 0}(Ly{alpha})) by an average factor of {approx}5, and by a much larger factor for the 80% of LBGs not classified as LAEs. We argue that most, if not all, of the observed Ly{alpha} emission in the diffuse halos originates in the galaxy H II regions but is scattered in our direction by H I gas in the galaxy's circum-galactic medium. The overall intensity of Ly{alpha} halos, but not the surface brightness distribution, is strongly correlated with the emission observed in the central {approx}1''-more luminous halos are observed for galaxies with stronger central Ly{alpha} emission. We show that whether or not a galaxy is classified as a giant 'Ly{alpha} blob' (LAB) depends sensitively on the Ly{alpha} surface brightness threshold reached by an observation. Accounting for diffuse Ly{alpha} halos, all LBGs would be LABs if surveys were sensitive to 10 times lower Ly{alpha} surface brightness thresholds; similarly, essentially all LBGs would qualify as LAEs.

79 ASTRONOMY AND ASTROPHYSICS↗

Testing the role of AGN on the star formation and metal enrichment of ‘twin galaxies’

Here, we explore the effect of AGN activity on the star formation history of galaxies by analysing the stellar population properties of 10 pairs of nearby twin galaxies – selected as being visually similar except for the presence of an AGN. The selection of such twin samples represents a method to study AGN feedback, as recently proposed by del Moral Castro et al. We use integral field unit (IFU) data from CALIFA, stacked within three fixed apertures. AGN galaxies in a twin pair suggest more evolved stellar populations than their non-AGN counterpart 90 per cent of the time, regardless of aperture size. A comparison with a large sample from SDSS confirms that most twins are representative of the general population, but in each twin the differences between twin members is significant. A set of targeted line strengths reveal the AGN member of a twin pair is older and more metal-rich than the non-AGN galaxy, suggesting AGN galaxies in our sample may either have an earlier formation time or follow a different star formation and chemical enrichment history. These results are discussed within two simple, contrasting hypotheses for the role played by AGN in galaxy evolution, which can be tested in the future at a greater detail with the use of larger data sets.

79 ASTRONOMY AND ASTROPHYSICS↗

CONCURRENT SUPERMASSIVE BLACK HOLE AND GALAXY GROWTH: LINKING ENVIRONMENT AND NUCLEAR ACTIVITY IN z = 2.23 H{alpha} EMITTERS

We present results from a Almost-Equal-To 100 ks Chandra observation of the 2QZ Cluster 1004+00 structure at z = 2.23 (hereafter 2QZ Clus). 2QZ Clus was originally identified as an overdensity of four optically-selected QSOs at z = 2.23 within a 15 Multiplication-Sign 15 arcmin{sup 2} region. Narrow-band imaging in the near-IR (within the K band) revealed that the structure contains an additional overdensity of 22 z = 2.23 H{alpha}-emitting galaxies (HAEs), resulting in 23 unique z = 2.23 HAEs/QSOs (22 within the Chandra field of view). Our Chandra observations reveal that three HAEs in addition to the four QSOs harbor powerfully accreting supermassive black holes (SMBHs), with 2-10 keV luminosities of Almost-Equal-To (8-60) Multiplication-Sign 10{sup 43} erg s{sup -1} and X-ray spectral slopes consistent with unobscured active galactic nucleus (AGN). Using a large comparison sample of 210 z = 2.23 HAEs in the Chandra-COSMOS field (C-COSMOS), we find suggestive evidence that the AGN fraction increases with local HAE galaxy density. The 2QZ Clus HAEs reside in a moderately overdense environment (a factor of Almost-Equal-To 2 times over the field), and after excluding optically-selected QSOs, we find that the AGN fraction is a factor of Almost-Equal-To 3.5{sup +3.8}{sub -2.2} times higher than C-COSMOS HAEs in similar environments. Using stacking analyses of the Chandra data and Herschel SPIRE observations at 250 {mu}m, we respectively estimate mean SMBH accretion rates ( M-dot{sub BH}) and star formation rates (SFRs) for the 2QZ Clus and C-COSMOS samples. We find that the mean 2QZ Clus HAE stacked X-ray luminosity is QSO-like (L{sub 2-10{sub keV}} Almost-Equal-To [6-10] Multiplication-Sign 10{sup 43} erg s{sup -1}), and the implied M-dot{sub BH}/SFR Almost-Equal-To (1.6-3.2) Multiplication-Sign 10{sup -3} is broadly consistent with the local M{sub BH}/M{sub *} relation and z Almost-Equal-To 2 X-ray selected AGN. In contrast, the C-COSMOS HAEs are on average an order of magnitude less X-ray luminous and have M-dot{sub BH}/SFR Almost-Equal-To (0.2-0.4) Multiplication-Sign 10{sup -3}, somewhat lower than the local M{sub BH}/M{sub *} relation, but comparable to that found for z Almost-Equal-To 1-2 star-forming galaxies with similar mean X-ray luminosities. We estimate that a periodic QSO phase with duty cycle Almost-Equal-To 2%-8% would be sufficient to bring star-forming galaxies onto the local M{sub BH}/M{sub *} relation. This duty cycle is broadly consistent with the observed C-COSMOS HAE AGN fraction ( Almost-Equal-To 0.4%-2.3%) for powerful AGN with L{sub X} {approx}> 10{sup 44} erg s{sup -1}. Future observations of 2QZ Clus will be needed to identify key factors responsible for driving the mutual growth of the SMBHs and galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparison of Stack Measurement Data from R&D Facilities to Regulatory Criteria. A Case Study from PNNL

Chemical emissions from research and development (R&D) activities are difficult to estimate because of the large number of chemicals used and the potential for continual changes in processes. In this case study, stack measurements taken from R&D facilities at Pacific Northwest National Laboratory (PNNL) were examined, including extreme worst-case emissions estimates and alternate analyses using a Monte Carlo method that takes into account the full distribution of sampling results. The results from these analyses were then compared to emissions estimated from chemical inventories. Results showed that downwind ambient air concentrations calculated from the stack measurement data were below acceptable source impact levels (ASILs) for almost all compounds, even under extreme worst-case analyses. However, for compounds with averaging periods of a year, the unrealistic but simplifying extreme worst-case analysis often resulted in exceedances of lower level regulatory criteria used to determine modeling requirements or to define trivial releases. Compounds with 24-hour averaging periods were nearly all several orders of magnitude below all, including the trivial release, criteria. The alternate analysis supplied a more realistic basis of comparison and an ability to explore effects under different operational modes.

54 ENVIRONMENTAL SCIENCES↗

Composition-dependence of 316 austenitic stainless steel deformation and aging properties for high-temperature applications - 18696

The present article is part of a broader effort aimed at assessing the possibility of tailoring the plasticity of austenitic stainless steels for structural applications in nuclear reactors. Three annealed heats of 316 stainless steel with large differences in stacking fault energy, carbon content, and ferrite content were used to study deformation and aging behaviors. Deformation of samples was investigated at room temperature by conventional tensile testing and at 350 deg. C by in situ neutron diffraction tensile testing. Aging was studied after 15 h at 750 deg. C through X ray diffraction and nano-indentation. (authors)

36 MATERIALS SCIENCE↗

Three-dimensional FIB/EBSD characterization of irradiated HfAl{sub 3}-Al composite

A thermal neutron-absorbing composite comprised of 28.4 vol.% HfAl{sub 3} intermetallic particles in an Al matrix, developed for use in a conduction-cooled thermal neutron filter, will enable fast flux irradiation of materials and fuels in an existing pressurized water test reactor. In this paper, an EBSD-FIB characterization approach is used to observe the microstructural changes of the HfAl{sub 3}-Al composite in response to simulated long-term neutron irradiation. Using a focused ion beam (FIB), the sample was fabricated to 25 μm x 25 μm x 20 μm and mounted on a transmission electron microscopy (TEM) grid. A series of operations were carried out repeatedly on the sample's top surface to prepare it for scanning electron microscopy (SEM). First, a ∼ 100-nm layer was removed by high voltage FIB milling. Then, several cleaning passes were performed on the newly exposed surface using low voltage FIB milling to improve the SEM image quality. The surface was then scanned by Electron Backscattering Diffraction (EBSD) to obtain a two-dimensional image. After 50 to 100 two-dimensional images were collected, the images were stacked to reconstruct a three-dimensional model using DREAM.3D software. Two such reconstructed three dimensional models were obtained from samples of the original and post-irradiation HfAl{sub 3}-Al composite, from which the most significant microstructural change caused by neutron irradiation appears to be the size reduction of both HfAl{sub 3} and Al grains. Possible causes include thermal expansion and related thermal strain from thermal neutron capture. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Molecular dynamics of a κB DNA element: base flipping via cross-strand intercalative stacking in a microsecond-scale simulation

The sequence-dependent structural variability and conformational dynamics of DNA play pivotal roles in many biological milieus, such as in the site-specific binding of transcription factors to target regulatory elements. To better understand DNA structure, function, and dynamics in general, and protein∙∙∙∙ DNA recognition in the ‘κB’ family of genetic regulatory elements in particular, we performed molecular dynamics simulations of a 20-bp DNA encompassing a cognate κB site recognized by the proto-oncogenic ‘c-Rel’ subfamily of NF-κB transcription factors. Simulations of the κB DNA in explicit water were extended to microsecond duration, providing a broad, atomically detailed glimpse into the structural and dynamical behavior of double helical DNA over many timescales. Of particular note, novel (and structurally plausible) conformations of DNA developed only at the long times sampled in this simulation—including a peculiar state arising at 0.7 μs and characterized by cross-strand intercalative stacking of nucleotides within a longitudinally sheared base pair, followed (at 1 μs) by spontaneous base flipping of a neighboring thymine within the A-rich duplex. Results and predictions from the microsecondscale simulation include implications for a dynamical NF-κB recognition motif, and are amenable to testing and further exploration via specific experimental approaches that are suggested herein.

59 BASIC BIOLOGICAL SCIENCES↗

Influence of scan pattern and geometry on the microstructure and soft-magnetic performance of additively manufactured Fe-Si

The influence of geometry and scan pattern on the microstructure evolution and magnetic performance of additively manufactured Fe-3Si components was investigated. To reduce eddy current losses, novel geometries were designed and built and the microstructure and properties of these samples were characterized. The laser scan pattern was shown to strongly influence both the as-built grain structure and strength of the crystallographic texture, resulting in measurable changes in the as-built magnetic performance. In thin wall samples, heat treatment resulted in an increase in the maximum relative magnetic permeability and decrease in power losses in most samples, consistent with grain growth. However, decreases in the spacing between thin walls to increase the stacking factor of the cross-section was shown to result in unwanted electrical shorting between walls and an increase in eddy current losses. Compared to simple parallel plate construction and a mesh structure, a novel cross-section design based on the Hilbert space filling curve was found to produce the lowest power losses. The mechanisms behind these results were explored using a combination of heat conduction and electromagnetic simulations, providing a route for future component and process optimization.

36 MATERIALS SCIENCE↗

Evolution of microstructure and residual stress during annealing of austenitic and ferritic steels

In this work the recovery and recrystallization processes occurring in ferritic and austenitic steels were studied. To determine the evolution of residual stresses during material annealing the nonlinear sin{sup 2}ψ diffraction method was used and an important relaxation of the macrostresses as well as the microstresses was found in the cold rolled samples subjected to heat treatment. Such relaxation occurs at the beginning of recovery, when any changes of microstructure cannot be detected using other experimental techniques. Stress evolution in the annealed steel samples was correlated with the progress of recovery process, which significantly depends on the value of stacking fault energy. - Highlights: • X-ray diffraction was used to determine the first order and second order stresses. • Diffraction data were analyzed using scale transition elastoplastic models model. • Stress relaxation in annealed ferritic and austenitic steels was correlated with evolution of microstructure. • Influence of stacking fault energy on thermally induced processes was discussed.

36 MATERIALS SCIENCE↗

EVIDENCE FOR 1000 km s{sup -1} MOLECULAR OUTFLOWS IN THE LOCAL ULIRG POPULATION

The feedback from galactic outflows is thought to play an important role in shaping the gas content, star formation history, and ultimately the stellar mass function of galaxies. Here we present evidence for massive molecular outflows associated with ultra-luminous infrared galaxies (ULIRGs) in the co-added Redshift Search Receiver {sup 12}CO (1-0) spectrum. Our stacked spectrum of 27 ULIRGs at z = 0.043-0.11 ({nu}{sub rest} = 110-120 GHz) shows broad wings around the CO line with {Delta}V(FWZI) {approx} 2000 km s{sup -1}. Its integrated line flux accounts for up to 25% {+-} 5% of the total CO line luminosity. When interpreted as a massive molecular outflow wind, the associated mechanical energy can be explained by a concentrated starburst with star formation rate (SFR) {>=}100 M{sub sun} yr{sup -1}, which agrees well with their SFR derived from the FIR luminosity. Using the high signal-to-noise stacked composite spectrum, we also probe {sup 13}CO and {sup 12}CN emission in the sample and discuss how the chemical abundance of molecular gas may vary depending on the physical conditions of the nuclear region.

79 ASTRONOMY AND ASTROPHYSICS↗

Final Report for Subcontract# B539681

This report summarizes the work performed under subcontract B539681. The scope of work described in the subcontract encompasses studies of fundamental research for fast ignition. The work statement from the from the original subcontract and the subsequent extension can be summarized in three major components: modeling of electron transport in experimental targets, development of diagnostics, and experimental implementation and analysis. All three of these areas have been addressed during the subcontract period, although the tasks detailed in the original subcontract were adapted to research conditions with guidance from the technical contact. The work performed in each of these areas is described. (1) Modeling of electron transport in experimental targets - Electron transport and x-ray generation in experimental targets were modeled with the Monte Carlo code Integrated Tiger Series 3.0 (ITS 3.0). This code package was also used to model the response of Bremsstrahlung spectrometer described in the paper. The modeling helped with target and spectrometer designs and was also used to interpret the measured data from the experiments. this work is coupled to the diagnostic development and experimental analysis and is described in the deliverable of the report. (2) Diagnostic Development - During the subcontract period a filter-stack Bremsstrahlung spectrometer using image plate dosimeters was developed, tested, and calibrated. The spectrometer design and sample data taken with the spectrometer was presented at the High Temperature Plasma Diagnostics conference (Albuquerque, NM 2008). The information was also subsequently published in the peer-reviewed conference proceedings (rev. Sci. Instrum. 79:10E305 (2008)). The diagnostic was fielded on over 10 experiments at the Jupiter Laser Facility at Lawrence Livermore and was also adapted for use on OMEGA EP, was discussed in the subcontract extension. A composition study of the image plate dosimeters was also disseminated as an internal LLNL technical memo. In addition, research was performed into two other diagnostics. Single Photon Counting using a CCD (Single Hit Spectrometer) is a well-established technique in the literature. The subcontractor assisted with implementation and calibration of the Single Hit Spectrometer and developed general use software for analysis of the output data. This software is currently being used by a number of collaborators at Lawrence Livermore. The development of a Single Hit Imager was also initially explored at the beginning of the subcontract period but, under direction of the technical contact, not further pursued in order to focus on the other priorities. (3) Experimental Implementation and Analysis - The subcontractor participated in over 10 separate 2-8 week experiments at the Jupiter Laser Facility at Lawrence Livermore. On many of these experiments, the diagnostics described above were fielded to take x-ray measurements for different physics goals, including those described in the original subcontract and for studies of diagnostic related issues for the National Ignition Facility. A series of experiments were carried out on planar foil targets to study the electrons generated in the relativistic laser plasma interaction under fast ignition relevant conditions. The data was analyzed with the Monte Carlo modeling described above.

42 ENGINEERING↗

A population of intermediate-mass black holes in dwarf starburst galaxies up to redshift = 1.5

We study a sample of ∼50,000 dwarf starburst and late-type galaxies drawn from the COSMOS survey with the aim of investigating the presence of nuclear accreting black holes (BHs) as those seed BHs from which supermassive BHs could grow in the early universe. We divide the sample into five complete redshift bins up to z = 1.5 and perform an X-ray stacking analysis using the Chandra COSMOS-Legacy survey data. After removing the contribution from X-ray binaries and hot gas to the stacked X-ray emission, we still find an X-ray excess in the five redshift bins that can be explained by nuclear accreting BHs. This X-ray excess is more significant for z<0.5. At higher redshifts, these active galactic nuclei could suffer mild obscuration, as indicated by the analysis of their hardness ratios. The average nuclear X-ray luminosities in the soft band are in the range 10{sup 39}–10{sup 40} erg s{sup −1}. Assuming that the sources accrete at ≥1% the Eddington rate, their BH masses would be ≤10{sup 5} M{sub ⊙}, thus in the intermediate-mass BH regime, but their mass would be smaller than the one predicted by the BH-stellar mass relation. If instead the sources follow the correlation between BH mass and stellar mass, they would have sub-Eddington accreting rates of ∼10{sup −3} and BH masses 1–9 × 10{sup 5} M{sub ⊙}. We thus conclude that a population of intermediate-mass BHs exists in dwarf starburst galaxies, at least up to z = 1.5, though their detection beyond the local universe is challenging due to their low luminosity and mild obscuration unless deep surveys are employed.

79 ASTRONOMY AND ASTROPHYSICS↗