Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Ultra-stable and poison tolerant oxygen evolution activity enabled by surface In 2 O 3- x (OH) y of Co 3 In 2 S 2 large single crystals

Water is an earth-abundant source for clean hydrogen production via electrochemical water electrolysis (WE). However, the surface poisoning that occurs in aqueous electrolytes drastically deactivates the electrocatalytic performance of electrodes. Here, in this study, we report electrochemically formed In 2 O 3-x (OH) y on the surface of a large (1–1.5 mm long, 0.5–0.6 mm wide and 0.3–0.5 mm thick) single crystal of Weyl semimetal Co 3 In 2 S 2 (Co 3 In 2 S 2 /In 2 O 3-x (OH) y ) as an ultra-stable and poison tolerant electrode for the oxygen evolution reaction (OER) in 1 M KOH, addressing a bottleneck in WE. The OER activity of the powder form of Co 3 In 2 S 2 is limited by its aerophilic nature. Remarkably, the single-crystal electrodes maintained their high activity for a continuous operational period of 5 h in 1 M KOH electrolyte with/without 10 mM strong surface-poisoning ligands i.e., potassium cyanide, bipyridine, and ethylenediaminetetraacetate disodium salt. The electrodes exhibited stable OER activity for 1000 h at 100 mA cm -2 (1.73 V vs. RHE). The temperature-dependent OER polarization curves (10–70 °C) unambiguously revealed surface poisoning through the suppression of precatalytic Co-redox peaks on the bipyridine poisoned electrode, which led to the stabilization of surface Co-sites. The X-ray photoelectron spectroscopy analyses of pristine, poisoned and post-electrocatalytic single-crystal Co 3 In 2 S 2 electrodes revealed the existence of an In 2 O 3-x (OH) y surface phase, which could be the potential heterostructure for the origin of ultra-stable and poison tolerant OER activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular reordering processes on ice (0001) surfaces from long timescale simulations

We report results of long timescale adaptive kinetic Monte Carlo simulations aimed at identifying possible molecular reordering processes on both proton-disordered and ordered (Fletcher) basal plane (0001) surfaces of hexagonal ice. The simulations are based on a force field for flexible molecules and span a time interval of up to 50 μs at a temperature of 100 K, which represents a lower bound to the temperature range of earth's atmosphere. Additional calculations using both density functional theory and an ab initio based polarizable potential function are performed to test and refine the force field predictions. Several distinct processes are found to occur readily even at this low temperature, including concerted reorientation (flipping) of neighboring surface molecules, which changes the pattern of dangling H-atoms, and the formation of interstitial defects by the downwards motion of upper-bilayer molecules. On the proton-disordered surface, one major surface roughening process is observed that significantly disrupts the crystalline structure. Despite much longer simulation time, such roughening processes are not observed on the highly ordered Fletcher surface which is energetically more stable because of smaller repulsive interaction between neighboring dangling H-atoms. However, a more localized process takes place on the Fletcher surface involving a surface molecule transiently leaving its lattice site. The flipping process provides a facile pathway of increasing proton-order and stabilizing the surface, supporting a predominantly Fletcher-like ordering of low-temperature ice surfaces. Our simulations also show that eventual proton-disordered patches on the surface may induce significant local reconstructions. Further, a subset of the molecules on the Fletcher surface are susceptible to forming interstitial defects which might provide active sites for various chemical reactions in the atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Transformations in Iron Borate under High-Temperature Annealing

Scanning electron microscopy and X-ray diffractometry are used to study surface morphology and crystal structure of iron borate FeBO{sub 3} annealed at different temperatures. Temperature limits of the structural stability are determined. It is shown that recrystallization to iron orthoborate Fe{sub 3}BO{sub 6} and hematite α-Fe{sub 2}O{sub 3} takes places at temperatures of 800–900°C and above 900°C, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interplay between quantum confinement and surface effects in thickness selective stability of thin Ag and Eu films

Using first-principles calculations, we show that both face-centered cubic (fcc) Ag (1 1 0) ultrathin films and body-centered cubic (bcc) Eu(1 1 0) ultrathin films exhibit thickness selective stability. Furthermore, the origin of such thickness selection is different. While the thickness selective stability in fcc Ag(1 1 0) films is mainly due to the well-known quantum well states ascribed to the quantum confinement effects in free-electron-like metal films, the thickness selection in bcc Eu(1 1 0) films is more complex and also strongly correlated with the occupation of the surface and surface resonance states.

36 MATERIALS SCIENCE↗

Free-Surface Liquid Lithium Flow Modeling and Stability Analysis for Fusion Applications

Liquid metal plasma facing components are considered an attractive design choice for fusion devices including pilot plants. Virtual prototyping of such devices includes modeling of free-surface flow of the electrically conductive liquid, which requires computational fluid dynamics (CFD) and magnetohydrodynamics (MHD) simulations. Numerical tools capable of simulating flows and heat transfer in the free-surface MHD flow were developed at PPPL based on the customized ANSYS CFX. Here, MHD is introduced using a magnetic vector potential approach. Free-surface flow capabilities are available in the code and were tested. Special stabilization procedures were derived and applied to improve convergence of the momentum equations with the source terms due to the Lorentz force and surface tension. Important characteristics of the fusion-relevant liquid metal flow is free surface smoothness and stability. Heat flux from the plasma impacts the liquid surface at a very acute angle, so any change of the free surface from axisymmetry can dramatically increase the local heat flux density and thus create excessive evaporation of liquid lithium into the plasma, which is detrimental to operations. Stability analysis of the liquid metal film flow was performed to determine applicable flow regimes. Thin film flow along horizontal wall is considered. Effects of gravity, magnetic field, and surface tension are included in the analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calibration of a Linear Free Energy Estimation Approach for Estimating Stability Constants for Metal-Bacterial Surface Complexes

In this study, we use the measured extent of metal adsorption onto bacterial cells to constrain a linear free energy relationship that allows estimation of unknown stability constants for metal-bacterial surface complexes based on the value of corresponding aqueous metal-acetate stability constants. A previous study (Fein et al., 2001) used metal adsorption experiments to constrain a similar relationship, but the experiments were conducted using acid-washed bacteria, and subsequent evidence (Borrok et al., 2004a) shows that the acid-washing step affects the extent of adsorption of a number of metals onto bacterial surfaces. We measured the adsorption of Zn, Ni, Co, Sr, and Nd onto Bacillus subtilis in 0.1 M NaClO 4 as a function of pH and metal:bacterial site ratio, using a non-electrostatic discrete four-site model of the bacterial protonation reactions as a basis for the metal adsorption modeling. The adsorption of the divalent cations (Zn, Ni, Co, and Sr) could best be modeled by considering adsorption reactions involving three sites on the bacterial surface; we used a one-site model to account for the Nd data that covered a more restricted pH range. The calculated stability constants for metal-Site 2 bacterial surface complexes are used to re-calibrate the linear free energy relationship previously defined by Fein et al. (2001). There is a significant difference between the original and the re-calibrated lines for weakly binding cations such as Sr 2+ , but the difference becomes negligible for the stronger-binding cations. Because the linear free energy relationship defined in this study was calibrated from experiments that involved bacteria that were not exposed to acidic conditions, the estimated stability constant values that result from using this relationship are likely to reasonably reflect bacterial adsorption behaviors that occur in realistic geologic settings.

54 ENVIRONMENTAL SCIENCES↗

On the structure of plasma liners for plasma jet induced magnetoinertial fusion

The internal structure and self-collapse properties of plasma liners, formed by the merger of argon plasma jets, have been studied via 3-dimensional numerical simulations using the FronTier code. We have shown that the jets merger process is accomplished through a cascade of oblique shock waves that heat the liner and reduce its Mach number. Oblique shock waves and the adiabatic compression heating have led to the 10 times reduction of the self-collapse pressure of a 3-dimensional argon liner compared to a spherically symmetric liner with the same pressure and density profiles at the merging radius. We have also observed a factor of 10 variations of pressure and density in the leading edge of the liner along spherical surfaces close to the interaction with potential plasma targets. Such a non-uniformity of imploding plasma liners presents problems for the stability of targets during compression.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Solution of two-dimensional electromagnetic scattering problem by FDTD with optimal step size, based on a semi-norm analysis

To solve the electromagnetic scattering problem in two dimensions, the Finite Difference Time Domain (FDTD) method is used. The order of convergence of the FDTD algorithm, solving the two-dimensional Maxwell’s curl equations, is estimated in two different computer implementations: with and without an obstacle in the numerical domain of the FDTD scheme. This constitutes an electromagnetic scattering problem where a lumped sinusoidal current source, as a source of electromagnetic radiation, is included inside the boundary. Confined within the boundary, a specific kind of Absorbing Boundary Condition (ABC) is chosen and the outside of the boundary is in form of a Perfect Electric Conducting (PEC) surface. Inserted in the computer implementation, a semi-norm has been applied to compare different step sizes in the FDTD scheme. First, the domain of the problem is chosen to be the free-space without any obstacles. In the second part of the computer implementations, a PEC surface is included as the obstacle. The numerical instability of the algorithms can be rather easily avoided with respect to the Courant stability condition, which is frequently used in applying the general FDTD algorithm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of defect density on ultrathin graphene-based metal diffusion barriers

The authors investigated the effects of defect density on the performance of monolayer graphene as a barrier to metal diffusion. The defects were introduced to the graphene by controlled ultraviolet-ozone irradiation. The barrier performance of pristine graphene was found to be superior to that of defective graphene at temperatures up to 700 °C. Changes in surface morphology were more prevalent in the defective graphene-based films than in the pristine graphene-based film; the thermal stability of graphene films depends on their defect density. Defect density was found to be a determining factor in the barrier performance of graphene.

42 ENGINEERING↗

Influence of step morphology on the structural phase transition of the α-Al{sub 2}O{sub 3}(0001) surface

The structural phase transition from the 1 × 1 to the √31 × √31 ± R9° structure of two types of α-Al{sub 2}O{sub 3}(0001) surfaces has been investigated using reflection high-energy electron diffraction. One of the α-Al{sub 2}O{sub 3}(0001) surfaces was composed of regularly arranged monolayer steps (M-surface), and the other surface was composed of multiples of bilayer high steps (B-surface). The surface transition from the 1 × 1 to the √31 × √31 ± R9° structure starts at 1200 °C on the M-surface, but the transition occurs at 1600 °C on the B-surface. We discuss the difference in the stability of these surfaces at high temperature from the viewpoint of the stoichiometry near the step edge and conclude that the B-surface is more stable than the M-surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancing Oxygen Stability in Low-Cobalt Layered Oxide Cathode Materials by Three-Dimensional Targeted Doping

In this project, we propose to develop a new concept and a generic platform that can lead to the greatly enhanced stabilization of all high-energy cathode materials, and in particular high-nickel (Ni) and low-cobalt (Co) oxides. The new concept is a 3D doping technology that hierarchically combines surface and bulk doping. We will use surface doping to stabilize the surface of primary particles and also introduce dopants in the bulk to further enhance oxygen stability, conductivity, and structural stability in low-Co oxides under high voltage and deep discharging operating conditions. This new concept not only will deliver a low-cost, high-energy cathode but also will provide a generic method that can stabilize all high-energy cathodes. The proposed novel 3D doping approach is poised to resolve some longstanding challenges in fundamental doping effects on battery materials as well as to reduce Li-ion batteries’ cost and improve their safety, energy density, and lifetime. To tackle this problem, we have formed a highly complementary multi-university/national labs/industry team to enable a doping-central and systematic investigation of low-Co materials and create a knowledge base for many electrode materials to be used in advanced electric vehicles. The successful execution of the proposed project relies on five components that can be carried out by the complementary team members: (1) a theoretical investigation of the surface and bulk stabilizing dopants (Persson), (2) a precise synthesis of materials with targeted doping (Lin and Xin), (3) development of electrolytes for high-Ni low-Co oxides (Xu), (4) multi-scale characterization of the structures and their interfaces by scanning transmission electron microscopy (SEM) and synchrotron X-ray imaging and spectroscopy tools (Xin and Lin), and (5) pouch cell-level integration (Fan). The UCI-led project will enable a doping-central and systematic investigation of low-Co materials and create a knowledge base for many electrode materials to be used in advanced electric vehicles.

25 ENERGY STORAGE↗

Structural And Functional Characterization of CC Chemokine CCL14

CC chemokine ligand 14, CCL14, is a human CC chemokine that is of recent interest because of its natural ability, upon proteolytic processing of the first eight NH{sub 2}-terminal residues, to bind to and signal through the human immunodeficiency virus type-1 (HIV-1) co-receptor, CC chemokine receptor 5 (CCR5). We report X-ray crystallographic structures of both full-length CCL14 and signaling-active, truncated CCL14 [9-74] determined at 2.23 and 1.8 {angstrom}, respectively. Although CCL14 and CCL14 [9-74] differ in their ability to bind CCR5 for biological signaling, we find that the NH{sub 2}-terminal eight amino acids (residues 1 through 8) are completely disordered in CCL14 and both show the identical mode of the dimeric assembly characteristic of the CC type chemokine structures. However, analytical ultracentrifugation studies reveal that the CCL14 is stable as a dimer at a concentration as low as 100 nM, whereas CCL14 [9-74] is fully monomeric at the same concentration. By the same method, the equilibrium between monomers of CCL14 [9-74] and higher order oligomers is estimated to be of EC{sub 1,4} = 4.98 {mu}M for monomer-tetramer conversion. The relative instability of CCL14 [9-74] oligomers as compared to CCL14 is also reflected in the K{sub d}'s that are estimated by the surface plasmon resonance method to be {approx}9.84 and 667 nM for CCL14 and CCL14 [9-74], respectively. This {approx}60-fold difference in stability at a physiologically relevant concentration can potentially account for their different signaling ability. Functional data from the activity assays by intracellular calcium flux and inhibition of CCR5-mediated HIV-1 entry show that only CCL14 [9-74] is fully active at these near-physiological concentrations where CCL14 [9-74] is monomeric and CCL14 is dimeric. These results together suggest that the ability of CCL14 [9-74] to monomerize can play a role for cellular activation.

36 MATERIALS SCIENCE↗

Electromagnetic Probes: A Chronometer of Heavy Ion Collision

I have known Predhiman for quite some time and I consider his friendship a great privilege. He along with some of his colleagues made the almost unique transition time to time from Quantum Electrodynamics of his (almost classical) electromagnetic plasma to Quantum Chromodynamics of quarks and gluons. Some of the papers are unique in the sense they surface up to the centre stage of the field of quarks and gluons giving us a new insight; the particular paper of Bannur and Kaw discussing the stability of quark gluon plasma is a particularly interesting one.I wish Predhiman the very best on this occasion and sincerely hope for a long vital and fruitful life that lies ahead.Interestingly enough this transition from QED (electromagnetic plasma) to QCD plasma (Quark Gluon Plasma) was motivated by consuming a very special kind of Indian soft nuts on Sunday afternoons, the consumers consisted of two persons, P. K. Kaw and Jitendra Parikh - some nuts!

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inclusion of line tension effect in classical nucleation theory for heterogeneous nucleation: A rigorous thermodynamic formulation and some unique conclusions

A rigorous thermodynamic formulation of the geometric model for heterogeneous nucleation including line tension effect is missing till date due to the associated mathematical hurdles. In this work, we develop a novel thermodynamic formulation based on Classical Nucleation Theory (CNT), which is supposed to illustrate a systematic and a more plausible analysis for the heterogeneous nucleation on a planar surface including the line tension effect. The appreciable range of the critical microscopic contact angle (θ{sub c}), obtained from the generalized Young’s equation and the stability analysis, is θ{sub ∞} < θ{sub c} < θ′ for positive line tension and is θ{sub M} < θ{sub c} < θ{sub ∞} for negative line tension. θ{sub ∞} is the macroscopic contact angle, θ′ is the contact angle for which the Helmholtz free energy has the minimum value for the positive line tension, and θ{sub M} is the local minima of the nondimensional line tension effect for the negative line tension. The shape factor f, which is basically the dimensionless critical free energy barrier, becomes higher for lower values of θ{sub ∞} and higher values of θ{sub c} for positive line tension. The combined effect due to the presence of the triple line and the interfacial areas (f{sup L} + f{sup S}) in shape factor is always within (0, 3.2), resulting f in the range of (0, 1.7) for positive line tension. A formerly presumed appreciable range for θ{sub c}(0 < θ{sub c} < θ{sub ∞}) is found not to be true when the effect of negative line tension is considered for CNT. Estimation based on the property values of some real fluids confirms the relevance of the present analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal stability of oxidized ultrathin Li films on TZM for plasma facing components

For improved understanding of the behavior of Li plasma facing components (PFCs) in the presence of oxygen impurities, we report on the thermal stability of ultrathin (up to 1.0 nm) LiO x films on a titanium-zirconium-molybdenum (TZM) alloy substrate over the temperature range of 310–1400 K. LiO x films were prepared by either post-oxidation of Li films or Li films deposited on an oxygen-precovered TZM surface. Thermal stability of these films was studied using a combination of temperature programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and low-energy ion scattering (LEIS). For post-oxidized Li films, TPD showed that no Li desorption occurred until temperatures above 620 K, and then Li desorbed from the surface via at least three desorption peaks. The O 1s XPS spectra on the post-oxidized films at 310 K indicate the formation of lithium oxide (Li2O) and peroxide/hydroxide (Li 2 O 2 /LiOH). The peroxide/hydroxide converts to oxide after heating to 680 K with no desorption of Li or O 2 , and then this film decomposes to liberate Li into the gas phase while leaving oxygen at the TZM surface. Heating the LiO x films to 1070 K led to a solid-state reaction with surface Mo atoms of the substrate to form a condensed binary lithium molybdenum oxide (LixMoOy) phase, which upon further heating decomposed to liberate gas phase binary lithium molybdenum oxide species. Li deposition on an oxygen-precovered TZM surface formed a complex, highly stable, oxygen rich, Li-O-Mo interfacial oxide. Li desorption from multilayer Li films on oxygen-precovered TZM surfaces occurred in a metallic Li multilayer peak and three other oxide-derived peaks. These results support the improved thermal stability of oxidized lithium as compared to metallic Li and have implications for Mo impurity transport into the plasma at high temperatures.

36 MATERIALS SCIENCE↗

Structures of native and affinity-enhanced WT1 epitopes bound to HLA-A*0201: Implications for WT1-based cancer therapeutics

Presentation of peptides by class I or class II major histocompatibility complex (MHC) molecules is required for the initiation and propagation of a T cell-mediated immune response. Peptides from the Wilms Tumor 1 transcription factor (WT1), upregulated in many hematopoetic and solid tumors, can be recognized by T cells and numerous efforts are underway to engineer WT1-based cancer vaccines. Here we determined the structures of the class I MHC molecule HLA-A*0201 bound to the native 126-134 epitope of the WT1 peptide and a recently described variant (R1Y) with improved MHC binding. The R1Y variant, a potential vaccine candidate, alters the positions of MHC charged side chains near the peptide N-terminus and significantly reduces the peptide/MHC electrostatic surface potential. These alterations indicate that the R1Y variant is an imperfect mimic of the native WT1 peptide, and suggest caution in its use as a therapeutic vaccine. Stability measurements revealed how the R1Y substitution enhances MHC binding affinity, and together with the structures suggest a strategy for engineering WT1 variants with improved MHC binding that retain the structural features of the native peptide/MHC complex.

59 BASIC BIOLOGICAL SCIENCES↗

Unstable domains of tearing and Kelvin-Helmholtz instabilities in a rotating cylindrical plasma

Effects of poloidal rotation profile on tearing and Kelvin-Helmholtz (KH) instabilities in a cylindrical plasma are investigated by using a reduced magnetohydrodynamic model. Since the poloidal rotation has different effects on the tearing and KH modes in different rotation regimes, four unstable domains are numerically identified, i.e., the destabilized tearing mode domain, stabilized tearing mode domain, stable-window domain, and unstable KH mode domain. It is also found that when the rotation layer is in the outer region of the rational surface, the stabilizing role of the rotation can be enhanced so significantly that the stable window domain is enlarged. Moreover, Alfvén resonances can be induced by the tearing and KH modes in such rotating plasmas. Radially wide profiles of current and vorticity perturbations can be formed when multiple current sheets on different resonance positions are coupled together.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ultrafine SnO{sub 2} nanocrystals anchored graphene composites as anode material for lithium-ion batteries

Highlights: • Ultrafine SnO{sub 2}@graphene composite is synthesized by a simple hydrothermal method. • SnO{sub 2} nanocrystals with size of ∼5 nm are distributed on the graphene sheets uniformly. • A reversible capacity of 808 mAh g{sup −1} is retained after 100 cycles at 200 mA g{sup −1}. • The capacity recovers to 1290 mAh g{sup −1} after being cycled at various rates for 60 cycles. - Abstract: Ultrafine tin dioxide (SnO{sub 2}) nanocrystals anchored graphene composite is synthesized by a simple hydrothermal method. Well-defined SnO{sub 2} nanocrystals with size of ∼5 nm are uniformly anchored on the graphene sheets. The two-dimensional nanostructure inherits the advantages of graphene, which possesses high electrical conductivity and large surface area. Furthermore, the ultrafine SnO{sub 2} nanocrystals anchoring on graphene sheets facilitate fast ion transportation and prevent aggregation. As a result, the produced nanocomposite exhibits an excellent cycling stability and rate capability for lithium storage (808 mAh g{sup −1} after 100 cycles at 200 mA g{sup −1}, 1290 mAh g{sup −1} at the current of 50 mA g{sup −1} after being cycled at various current densities for 60 cycles)

77 NANOSCIENCE AND NANOTECHNOLOGY↗