Search NASA⌕ Search

SEARCH · Search NASA

Results for “torque density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Spin-Orbit Torque Switching of a Nearly Compensated Ferrimagnet by Topological Surface States

Utilizing spin-orbit torque (SOT) to switch a magnetic moment provides a promising route for low-power-dissipation spintronic devices. Here, the SOT switching of a nearly compensated ferrimagnet Gd x (FeCo) 1-x by the topological insulator [Bi 2 Se 3 and (BiSb) 2 Te 3 ] is investigated at room temperature. The switching current density of (BiSb) 2 Te 3 (1.20 × 10 5 A cm -2 ) is more than one order of magnitude smaller than that in conventional heavy-metal-based structures, which indicates the ultrahigh efficiency of charge-spin conversion (>1) in topological surface states. By tuning the net magnetic moment of Gd x (FeCo) 1-x via changing the composition, the SOT efficiency has a significant enhancement (6.5 times) near the magnetic compensation point, and at the same time the switching speed can be as fast as several picoseconds. Combining the topological surface states and the nearly compensated ferrimagnets provides a promising route for practical energy-efficient and high-speed spintronic devices.

36 MATERIALS SCIENCE↗

Error-Field Penetration Thresholds in Ohmically Heated ITER and SPARC Plasmas

The critical n=1, n=2, and n=3 error-field amplitudes needed to trigger error-field penetration in ITER and SPARC, steady-state, ohmically heated plasmas are calculated using a standard asymptotic matching approach. The calculation incorporates plasma impurities, trapped particles, the bootstrap current, and neoclassical poloidal flow-damping. The energy confinement time is specified by the neo-Alcator scaling law in the low-density linear ohmic confinement (LOC) regime, and by the ITER-89P L-mode scaling law in the high-density saturated ohmic confinement regime (SOC) regime. The response of the plasma in the inner region is calculated using a linearized version of the four-field model. At the normal operating electron number density, diamagnetic levels of rotation are found to be sufficient to protect ITER and SPARC ohmically heated plasmas from m=2/n=1 error-field penetration. On other hand, SPARC, and especially ITER, ohmically heated plasmas may be vulnerable to n>1 error-field penetration. ITER and SPARC ohmically heated plasmas are also slightly more susceptible to error-field penetration when the electron fluid at the rational surface rotates in the ion diamagnetic direction, rather than the electron diamagnetic direction. At electron number densities that are sufficiently low that the plasma lies in the LOC confinement regime, the error-field penetration threshold increases with increasing density. However, as soon as the electron number density becomes large enough that the plasma enters the SOC regime, the increase in the error-field penetration threshold with increasing density levels off.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High Power Density Motors

With the growing concerns of global warming, the need for pollution-free vehicles is ever increasing. Pollution-free flight is one of NASA's goals for the 21" Century. , One method of approaching that goal is hydrogen-fueled aircraft that use fuel cells or turbo- generators to develop electric power that can drive electric motors that turn the aircraft's propulsive fans or propellers. Hydrogen fuel would likely be carried as a liquid, stored in tanks at its boiling point of 20.5 K (-422.5 F). Conventional electric motors, however, are far too heavy (for a given horsepower) to use on aircraft. Fortunately the liquid hydrogen fuel can provide essentially free refrigeration that can be used to cool the windings of motors before the hydrogen is used for fuel. Either High Temperature Superconductors (HTS) or high purity metals such as copper or aluminum may be used in the motor windings. Superconductors have essentially zero electrical resistance to steady current. The electrical resistance of high purity aluminum or copper near liquid hydrogen temperature can be l/lOO* or less of the room temperature resistance. These conductors could provide higher motor efficiency than normal room-temperature motors achieve. But much more importantly, these conductors can carry ten to a hundred times more current than copper conductors do in normal motors operating at room temperature. This is a consequence of the low electrical resistance and of good heat transfer coefficients in boiling LH2. Thus the conductors can produce higher magnetic field strengths and consequently higher motor torque and power. Designs, analysis and actual cryogenic motor tests show that such cryogenic motors could produce three or more times as much power per unit weight as turbine engines can, whereas conventional motors produce only 1/5 as much power per weight as turbine engines. This summer work has been done with Litz wire to maximize the current density. The current is limited by the amount of heat it generates. By increasing the heat transfer out of the wire, the wires can carry a larger current and therefore produce more force. This was done by increasing the surface area of the wire to allow more coolant to flow over it. Litz wire was used because it can carry high frequency current. It also can be deformed into configurations that would increase the surface area. The best configuration was determined by heat transfer and force plots that were generated using Maxwell 2D. Future work will be done by testing and measuring the thrust force produced by the wires in a magnetic field.

Kascak, Daniel J.↗

Alignment of dust grains in ionized regions

The rate at which charged dust grains in a plasma are torqued by passing ions and electrons is calculated. When photo-emission of electrons is not important, attraction of ions by the grain monopole potential increases the rate at which the grains' spins are dealigned by nearly an order of magnitude. Consequently, the energy density of the magnetic field required to align grains in an H II region may be increased by about an order of magnitude. In contrast, electric dipole and quadrupole moments are unlikely to produce large dealignment rates for grains of modest length-to-width ratio. Nonetheless, for positively charged grains these higher-order moments likely prevent monopole repulsion of ions from reducing the dealignment rate far below that for neutral grains. The presence of positive grain charge therefore does not greatly facilitate grain alignment in an H II region.

Anderson, Nels↗

Enhancement of the anti-damping spin torque efficacy of platinum by interface modification

We report a strong enhancement of the efficacy of the spin Hall effect (SHE) of Pt for exerting anti-damping spin torque on an adjacent ferromagnetic layer by the insertion of ≈0.5 nm layer of Hf between a Pt film and a thin, ≤2 nm, Fe{sub 60}Co{sub 20}B{sub 20} ferromagnetic layer. This enhancement is quantified by measurement of the switching current density when the ferromagnetic layer is the free electrode in a magnetic tunnel junction. The results are explained as the suppression of spin pumping through a substantial decrease in the effective spin-mixing conductance of the interface, but without a concomitant reduction of the ferromagnet's absorption of the SHE generated spin current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Venusian atmospheric and Magellan properties from attitude control data

Results are presented of the study of the Venusian atmosphere, Magellan aerodynamic moment coefficients, moments of inertia, and solar moment coefficients. This investigation is based upon the use of attitude control data in the form of reaction wheel speeds from the Magellan spacecraft. As the spacecraft enters the upper atmosphere of Venus, measurable torques are experienced due to aerodynamic effects. Solar and gravity gradient effects also cause additional torques throughout the orbit. In order to maintain an inertially fixed attitude, the control system counteracts these torques by changing the angular rates of three reaction wheels. Model reaction wheel speeds are compared to observed Magellan reaction wheel speeds through a differential correction procedure. This method determines aerodynamic, atmospheric, solar pressure, and mass moment of inertia parameters. Atmospheric measurements include both base densities and scale heights. Atmospheric base density results confirm natural variability as measured by the standard orbital decay method. Potential inconsistencies in free molecular aerodynamic moment coefficients are identified. Moments of inertia are determined with a precision better than 1 percent of the largest principal moment of inertia.

Croom, Christopher A.↗

Wide Pedestal Quiescent H-mode Plasmas in DIII-D Tokamak

Quiescent H-mode (QH-mode) is a naturally ELM-stable high performance operation mode which has been obtained in DIII-D, ASDEX Upgrade, JET, and JT-60U [1 and references within]. The additional transport to maintain constant density and radiation is provided by the benign coherent edge harmonic oscillations mode (EHO) [2] which is thought to be a kink/peeling mode [3]. A new QH-mode regime with enhanced pedestal has been discovered in DIII-D at reactor-relevant low torque and collisionality [4]. The regime was originally found in conventional QH-mode when the counter-Ip neutral beam torque drops to ~2Nm in double null plasma shapes. It is referred to as ‘wide-pedestal QH-mode’ because the pedestal width exceeds the EPED kinetic ballooning mode (KBM) limit [5]. Across the transition from QH to wide-pedestal QH, the pedestal electron pressure generally increases by 60% and widens by 50% and the plasma confinement (ITER Hy98y2) rises by 40%. The onset of broadband edge MHD modes and micro-turbulence accompanied with a lower ExB shear in this region is a common feature of the wide-pedestal QH, instead of EHO. It is conjectured that the increased transport provided by these edge modes reduces the pedestal gradients resulting in a higher pedestal while still remaining below the ELM-limit.

Chen, Xi↗

A UNIFIED THEORY FOR THE EFFECTS OF STELLAR PERTURBATIONS AND GALACTIC TIDES ON OORT CLOUD COMETS

We examine the effects of passing field stars on the angular momentum of a nearly radial orbit of an Oort cloud comet bound to the Sun. We derive the probability density function of the change in angular momentum from one stellar encounter, assuming a uniform and isotropic field of perturbers. We show that the total angular momentum follows a Levy flight, and determine its distribution function. If there is an asymmetry in the directional distribution of perturber velocities, the marginal probability distribution of each component of the angular momentum vector can be different. The constant torque attributed to Galactic tides arises from a non-cancellation of perturbations with an impact parameter of order the semimajor axis of the comet. When the close encounters are rare, the angular momentum is best modeled by the stochastic growth of stellar encounters. If trajectories passing between the comet and the Sun occur frequently, the angular momentum exhibits the coherent growth attributed to the Galactic tides.

79 ASTRONOMY AND ASTROPHYSICS↗

LAGRANGIAN STATISTICS OF DARK HALOS IN A LAMBDACDM COSMOLOGY

New statistical properties of dark matter halos in Lagrangian space are presented. Tracing back the dark matter particles constituting bound halos resolved in a series of N-body simulations, we measure quantitatively the correlations of the proto-halo's inertia tensors with the local tidal tensors and investigate how the correlation strength depends on the proto-halo's sphericity, local density, and filtering scale. It is shown that the majority of the proto-halos exhibit strong correlations between the two tensors provided that the tidal field is smoothed on the proto-halo's mass scale. The correlation strength is found to increase as the proto-halo's sphericity increases, as the proto-halo's mass increases, and as the local density becomes close to the critical value, delta {sub ec}. It is also found that those peculiar proto-halos which exhibit exceptionally weak correlations between the two tensors tend to acquire higher specific angular momentum in Eulerian space, which is consistent with the linear tidal torque theory. In the light of our results, it is intriguing to speculate a hypothesis that the low surface brightness galaxies observed at present epoch correspond to the peculiar proto-halos with extreme low sphericity whose inertia tensors are weakly correlated with the local tidal tensors.

79 ASTRONOMY AND ASTROPHYSICS↗

Evolution of the solar nebula. I - Nonaxisymmetric structure during nebula formation

Numerical solutions of the equations of hydrodynamics, gravitation, and radiative transfer in three spatial dimensions are used to model the formation and time evolution of the early solar nebula in order to learn whether or not gravitational torques between nonaxisymmetric structures in the solar nebula can transport angular momentum rapidly enough to produce nebula clearing on astronomically indicated (10 to the 5 to 10 to the 7 yr) time scales. The models involve solutions for the collapse of spherical clouds with assumed initial density and rotation profiles onto protosuns of variable mass. Most of the models assume uniform initial density and rotation, and have variations in the initial parameters of cloud mass, cloud rotation rate, and protosun mass which are chosen to simulate a range of possible phases of early solar nebula evolution. The models show little tendency for directly forming small numbers of giant gaseous protoplanets through gaseous gravitational instability.

Boss, Alan P.↗

THE IMPORTANCE OF DISK STRUCTURE IN STALLING TYPE I MIGRATION

As planets form they tidally interact with their natal disks. Though the tidal perturbation induced by Earth and super-Earth mass planets is generally too weak to significantly modify the structure of the disk, the interaction is potentially strong enough to cause the planets to undergo rapid type I migration. This physical process may provide a source of short-period super-Earths, though it may also pose a challenge to the emergence and retention of cores on long-period orbits with sufficient mass to evolve into gas giants. Previous numerical simulations have shown that the type I migration rate sensitively depends upon the circumstellar disk's properties, particularly the temperature and surface density gradients. Here, we derive these structure parameters for (1) a self-consistent viscous-disk model based on a constant {alpha} prescription, (2) an irradiated disk model that takes into account heating due to the absorption of stellar photons, and (3) a layered accretion disk model with variable {alpha} parameter. We show that in the inner viscously heated regions of typical protostellar disks, the horseshoe and corotation torques of super-Earths can exceed their differential Lindblad torque and cause them to undergo outward migration. However, the temperature profile due to passive stellar irradiation causes type I migration to be inward throughout much of the disk. For disks in which there is outward migration, we show that location and the mass range of the 'planet traps' depend on some uncertain assumptions adopted for these disk models. Competing physical effects may lead to dispersion in super-Earths' mass-period distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

Density waves in Saturn's rings probed by radio and optical occultation - Observational tests of theory

A parallel examination is conducted of Voyager radio and photopolarimeter occultation observations of the Saturn A ring's density waves. The radio instrument waves exhibit an average -90 deg offset from the dynamical phase. A warping height of about 100-m amplitude can qualtitatively reproduce this phase shift, while preserving the overall model wave shape. These results may be profoundly relevant for satellite-ring torque calculations in Saturn's rings, given the deposition of all of the net torque of the standard model in the first wavelength.

Brophy, Thomas G.↗

Bulk Fermi surface of the Weyl type-II semimetallic candidate γ - MoTe 2

The electronic structure of semi-metallic transition-metal dichalcogenides, such as WTe$_2$ and orthorhombic $\gamma-$MoTe$_2$, are claimed to contain pairs of Weyl points or linearly touching electron and hole pockets associated with a non-trivial Chern number. For this reason, these compounds were recently claimed to conform to a new class, deemed type-II, of Weyl semi-metallic systems. A series of angle resolved photoemission experiments (ARPES) claim a broad agreement with these predictions detecting, for example, topological Fermi arcs at the surface of these crystals. We synthesized single-crystals of semi-metallic MoTe$_2$ through a Te flux method to validate these predictions through measurements of its bulk Fermi surface (FS) via quantum oscillatory phenomena. We find that the superconducting transition temperature of $\gamma-$MoTe$_2$ depends on disorder as quantified by the ratio between the room- and low-temperature resistivities, suggesting the possibility of an unconventional superconducting pairing symmetry. Similarly to WTe$_2$, the magnetoresistivity of $\gamma-$MoTe$_2$ does not saturate at high magnetic fields and can easily surpass $10^{6}$ \%. Remarkably, the analysis of the de Haas-van Alphen (dHvA) signal superimposed onto the magnetic torque, indicates that the geometry of its FS is markedly distinct from the calculated one. The dHvA signal also reveals that the FS is affected by the Zeeman-effect precluding the extraction of the Berry-phase. A direct comparison between the previous ARPES studies and density-functional-theory (DFT) calculations reveals a disagreement in the position of the valence bands relative to the Fermi level $\varepsilon_F$. Here in this paper, we show that a shift of the DFT valence bands relative to $\varepsilon_F$, in order to match the ARPES observations, and of the DFT electron bands to explain some of the observed dHvA frequencies, leads to a good agreement between the calculations and the angular dependence of the FS cross-sectional areas observed experimentally. However, this relative displacement between electron- and hole-bands eliminates their crossings and, therefore, the Weyl type-II points predicted for $\gamma-$MoTe$_2$

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Isolated Rotor Forward Flight Testing from One Atmosphere down to Martian Atmospheric Densities

With the recent interest in Martian exploration using Unmanned Aerial Vehicles (UAV), an experimental study was conducted to investigate rotor performance at Martian atmospheric conditions. Both simulation and testing of rotors is vital for the evaluation of performance and behavior of a rotor, especially when subjected to a Marian atmosphere. One critical test that has not been performed to date is simulated helicopter forward flight in a Martian atmosphere. To achieve this, the test must be conducted in a facility which can be evacuated to the atmospheric pressure and density of Mars. A unique 40-in diameter rotor, roughly approximating a proposed design for a Mars Helicopter (MH), was tested in forward flight at Mars atmospheric pressure at the NASA Ames Planetary Aeolian Laboratory (PAL). The goal of this experiment was to collect rotor thrust, RPM, power, torque, and acoustics measurements. Subsequently, these results are compared with simulated cases using a mid-fidelity Computational Fluid Dynamics (CFD) approach. As expected, rotor thrust and power results are drastically reduced when under low atmospheric conditions. In addition, Reynolds number effects seem to play a vital role that cannot be neglected.

Ament, Geoffrey A.↗

Intrinsic rotation generation in ELM-free H-mode plasmas in the DIII-D tokamak--Experimental observations

A detailed description is presented of the experiment reported in [S. H. Mueller et al., Phys. Rev. Lett. 106, 115001 (2011)], which reported the first measurements of fluid turbulent stresses in a tokamak H-mode pedestal. Mach probe measurements disclosed a narrow co-current rotation layer at the separatrix, which is also seen in some L-modes [J. A. Boedo et al., Phys. Plasmas 18, 032510 (2011)]. Independent evidence for the existence of the edge co-rotation layer is presented from main-ion rotation measurements by charge-exchange-recombination spectroscopy in comparable helium plasmas. The probe measurements are validated against density and electron temperature profiles from Thomson scattering and in terms of the measured turbulent particle transport, which is consistent with the global density rise. Non-diffusive non-convective angular momentum transport is required by two independent experimental observations: (1) A persistent dip in the rotation profile separates the edge layer from the evolving core region during intrinsic rotation development. (2) The rotation profiles with co- and counter-current neutral beam injection appear well described as the simple sum of a constant intrinsic part and the beam-driven part, also demonstrating the profile-independence of the intrinsic torque. Characteristics of the turbulent fluctuations composing the fluid turbulent stresses are discussed: Up to 0.5 cm inside the separatrix, the low amplitude of the Reynolds stress (<0.05 Nm of torque) is due to both a reduction of the fluctuation amplitudes at the peak of the edge co-rotation layer and weak correlations between the toroidal and radial velocity fluctuations. Further into the core, the correlations increase significantly up to a value of +0.75, resulting in an almost unidirectional character of the turbulent Reynolds stress, generating substantial counter-current torques up to -2 Nm. Additional mechanisms must be present to balance these torques and explain the co-current core-plasma spin-up at a rate of +0.3 Nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin orbit torque switching of synthetic Co/Ir/Co trilayers with perpendicular anisotropy and tunable interlayer coupling

Spin orbit torque (SOT) has attracted much attention as an energy efficient electrical method to switch the magnetization in single magnetic layer with both in-plane and perpendicular anisotropy. Here, we report SOT switching of synthetic antiferromagnetic and ferrimagnetic Co/Ir/Co trilayers, where the net magnetization and the interlayer coupling strength are highly controllable. Here, a weak external field dependence of the SOT switching was observed due to the robust domain wall structure in the trilayer. The switching current density was observed to scale inversely with the net magnetization. For trilayers with the same net magnetization, switching current is independent of the layer order because switching in the thicker Co layer dominates. In both ferromagnetic and antiferromagetic regimes, the switching current reflects the interlayer coupling strength.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Design of a Probe for Strain Sensitivity Studies of Critical Current Densities in SC Wires and Tapes

The design of a variable-temperature probe used to perform strain sensitivity measurements on LTS wires and HTS wires and tapes is described. The measurements are intended to be performed at liquid helium temperatures (4.2 K). The wire or tape to be measured is wound and soldered on to a helical spring device, which is fixed at one end and subjected to a torque at the free end. The design goal is to be able to achieve {+-} 0.8 % strain in the wire and tape. The probe is designed to carry a current of 2000A.

43 PARTICLE ACCELERATORS↗