SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The status of theory and experiment for the determination of the CO vibrational frequencies in binary unsaturated transition metal carbonyl cations, neutrals and anions is reviewed.
Progress in the search for new high temperature thermoelectric materials at the Jet Propulsion Laboratory is reviewed. Novel transition metal compounds were selected as potential new high performance thermoelectric materials and criteria of selection are presented and discussed. Samples of these new compounds were prepared at JPL by a variety of techniques. Encouraging experimental results obtained on several of these compounds are reported and show that they have the potential to be the next generation of thermoelectric materials.
Hydrogen fuel cells have attracted growing attention for high-performance automotive power but are hindered by the scarcity of platinum (and other precious metals) used to catalyze the sluggish oxygen reduction reaction (ORR). We report on a family of nonprecious transition metal nitrides (TMNs) as ORR electrocatalysts in alkaline medium. The air-exposed nitrides spontaneously form a several-nanometer-thick oxide shell on the conductive nitride core, serving as a highly active catalyst architecture. The most active catalyst, carbon-supported cobalt nitride (Co 3 N/C), exhibited a half-wave potential of 0.862 V and achieved a record-high peak power density among reported nitride cathode catalysts of 700 mW cm –2 in alkaline membrane electrode assemblies. Operando x-ray absorption spectroscopy studies revealed that Co 3 N/C remains stable below 1.0 V but experiences irreversible oxidation at higher potentials. This work provides a comprehensive analysis of nonprecious TMNs as ORR electrocatalysts and will help inform future design of TMNs for alkaline fuel cells and other energy applications.
The effect of mechanical strains on the volcano plot for the HER and for the ORR was determined from first principles calculations for thirteen transition metals. The lines stand for the variation in the catalytic activity of each metal as a function of the applied elastic strain.
There were three major goals and objectives of this project: 1) Develop tools to understand density-driven errors in transition metal complexes, 2) Evaluate and minimize energy delocalization error and static correlation error through judicious functional choice, and 3) applying this workflow to machine-learning accelerated screening of redox couples. Over the reporting period, we developed a framework for eliminating flat plane errors. We introduced fully non-empirical coefficients. We demonstrated the approach on both molecules and solids. We investigated and eliminated density driven errors and demonstrated their impact on potential energy surfaces. We trained machine learning models both in a method-dependent fashion and to predict errors in method accuracy. We built large data sets of small molecule energetics and multi-reference character.
A combined experimental/theoretical study is presented of the onset conditions for gas phase reaction and particle nucleation in hot substrate/cold gas CVD of transition metal oxides. Homogeneous reaction onset conditions are predicted using a simple high activation energy reacting gas film theory. Experimental tests of the basic theory are underway using an axisymmetric impinging jet CVD reactor. No vapor phase ignition has yet been observed in the TiCl4/O2 system under accessible operating conditions (below substrate temperature Tw = 1700 K). The goal of this research is to provide CVD reactor design and operation guidelines for achieving acceptable deposit microstructures at the maximum deposition rate while simultaneously avoiding homogeneous reaction/nucleation and diffusional limitations.
In the late 1970s and early 1980s, several research groups reported high-efficiency and stable photoelectrochemical solar cells based on transition metal dichalcogenides (TMDS; e.g., MoS 2 , WSe 2 , and MoSe 2 ) immersed in iodide/tri-iodide electrolytes. A consensus emerged that smooth crystals were necessary for high efficiency based on significant evidence that rough crystals with exposed edge sites produced lower photocurrents and fill factors. However, anecdotal observations in the literature hinted at significant performance variation among apparently smooth crystals with the possibility of highly active “hot” edge sites. Furthermore, this mini-review article is a case study on how spatially resolved photoelectrochemical techniques developed in the 2020s are answering old questions regarding the origin of performance variation in high efficiency n-type TMD|I – ,I 3 – |Pt photoelectrochemical solar cells.
Methods that accelerate the evaluation of molecular properties are essential for chemical discovery. While some degree of ligand additivity has been established for transition metal complexes, it is underutilized in asymmetric complexes, such as the square pyramidal coordination geometries highly relevant to catalysis. To develop predictive methods beyond simple additivity, we apply a many-body expansion to octahedral and square pyramidal complexes and introduce a correction based on adjacent ligands (i.e., the cis interaction model). We first test the cis interaction model on adiabatic spin-splitting energies of octahedral Fe(II) complexes, predicting DFT-calculated values of unseen binary complexes to within an average of 1.4 kcal/mol. Uncertainty analysis reveals the optimal basis, comprising the homoleptic and mer symmetric complexes. We next show that the cis model (i.e., the cis interaction model solved for the optimal basis) infers both DFT- and CCSD(T)-calculated model catalytic reaction energies to within 1 kcal/mol on average. The cis model predicts low-symmetry complexes with reaction energies outside the range of binary complex reaction energies. We observe that trans interactions are unnecessary for most monodentate systems but can be important for some combinations of ligands, such as complexes containing a mixture of bidentate and monodentate ligands. Lastly, we demonstrate that the cis model may be combined with Δ-learning to predict CCSD(T) reaction energies from exhaustively calculated DFT reaction energies and the same fraction of CCSD(T) reaction energies needed for the cis model, achieving around 30% of the error from using the CCSD(T) reaction energies in the cis model alone.
In honor of John Goodenough’s centennial birthday, I discuss some of his insights into magnetism and the role of mixed valence in transition-metal oxides. His ideas form an important part of the continuing evolution of our understanding of these fascinating materials with a wide range of technologically-important functionalities. In particular, I will mention connections to phenomena such as colossal magnetoresistance, enhanced thermopower, and high-temperature superconductivity.
This review provides an overview of the different methods and computer codes that are used to interpret 2p x-ray absorption spectra of 3d transition metal ions. We first introduce the basic parameters and give an overview of the methods used. We start with the semi-empirical multiplet codes and compare the different codes that are available. A special chapter is devoted to the user friendly interfaces that have been written on the basis of these codes. Next we discuss the first principle codes based on band structure, including a chapter on Density Functional theory based approaches. We also give an overview of the first-principle multiplet codes that start from a cluster calculation and we discuss the wavefunction based methods, including multi-reference methods. We end the review with a discussion of the link between theory and experiment and discuss the open issues in the spectral analysis.
Femtosecond EXAFS is implemented at an XFEL and can be used to observe short-lived intermediate states of photoexcited transition metal complexes in solution.
Nitrogen and oxygen-donor ligands comprised of alkylimidazoles, tertiary amides, and diglycolamides were employed to form transition metal chelates in the preparation of twelve magnetic ionic liquids. Viscosities as low as 198 cP were achieved.
Metal ion doping into halide perovskite materials is a promising approach to enhance long-term film stability and improve solar cell performance. Moreover, the idea of doping metals into halide perovskites is also driven by applications in heterogeneous catalysis. Here, we investigate the incorporation of the transition metals Pt and Pd into mixed-halide perovskite materials. We find that Pt aggregates in large clusters in iodine- and bromine-rich perovskite film compositions, whereas Pd incorporation depends on the underlying bromine to iodine ratio. Furthermore, by using optical and structural characterization methods, we observe that phase segregation in the perovskite layer is suppressed upon doping of either of these metals into the material. This approach further shows the potential to obtain catalytically active halide perovskite films in which the perovskite can serve as a host matrix.
Multiple techniques are combined to determine the amount of intercalation and/or substitution in transition-metal dichalcogenides. Kiessig fringes in the X-ray reflectivity pattern are used to calculate thickness. Laue oscillations in the specular diffraction pattern of the crystallographically aligned samples determine the number of unit cells in the coherently diffracting domains. The amount of impurity phase(s) is estimated by the difference between the thickness of the films and the size of the domains. If the difference is small relative to the total film thickness, the composition of the crystalline phase can be determined from X-ray fluorescence measurements. The number of unit cells possible can be calculated from the amount of each element determined by X-ray fluorescence measurements using in-plane lattice parameters, and the amount of the anion should agree with the number of unit cells determined from the Laue oscillations. The total amount of the metal relative to that required for the number of unit cells from the Laue oscillations provides a direct determination of the relative amount of intercalation and/or substitution in the crystalline dichalcogenide. So the utility of this approach is illustrated in Fe x V 1–y Se 2 samples. The relative amount of intercalation versus substitution was determined independently using electron microscopy and Rietveld refinement of diffraction patterns and is consistent with this new approach.
Hybridization between interlayer exciton (ILX) and intralayer excitons offers a powerful route to engineer light–matter interactions in transition-metal dichalcogenide (TMDC) heterostructures, yet the underlying mechanism and selection rules remain elusive. Here we probe exciton hybridization in MoTe2/MoSe2 heterobilayers under a tunable out-of-plane electric field and observe distinct avoided crossings in the electric-field dependent reflection spectra. We associate them with coupling between excited ILX states, including the 2p and 2s Rydberg states, and MoTe2 intralayer exciton. Supported by ab initio GW plus Bethe-Salpeter equation (GW-BSE) calculations, we identify the hybridizing states and establish optical selection rules based on the effective angular momentum of the exciton states. These findings highlight the role of excitonic binding in the observed hybridization, rather than that of simple band-mixing models, and provide a new pathway for brightening high-energy dark states.
Triggering the anionic redox reaction is an effective approach to boost the capacity of layered transition metal (TM) oxides. However, the irreversible oxygen release and structural deterioration at high voltage remain conundrums. Herein, a strategy for Mg ion and vacancy dual doping with partial TM ions pinned in the Na layers is developed to improve both the reversibility of anionic redox reaction and structural stability of layered oxides. Both the Mg ions and vacancies (□) are contained in the TM layers, while partial Mn ions (~1.1%) occupy the Na-sites. The introduced Mg ions combined with vacancies not only create abundant nonbonding O 2p orbitals in favor of high oxygen redox capacity, but also suppress the voltage decay originated from Na–O–□ configuration. The Mn ions pinned in the Na layers act as “rivets” to restrain the slab gliding at extreme de-sodiated state and thereby inhibit the generation of cracks. The positive electrode, Na 0.67 Mn 0.011 [Mg 0.1 □ 0.07 Mn 0.83 ]O 2 , delivers an enhanced discharge capacity and decent cyclability. This study provides insights into the construction of stable layered oxide positive electrode with highly reversible anionic redox reaction for sodium storage.
Two-dimensional (2D) superconducting states have attracted much recent interest, especially when they coexist with nontrivial band topology which affords a promising approach towards Majorana fermions. Using first-principles calculations, we predict van der Waals monolayered transition-metal monohalides MX (M = Zr, Mo; X = F, Cl) as a class of 2D superconductors with remarkable transition temperature (5.9–12.4 K). Anisotropic Migdal-Eliashberg theory reveals that ZrCl have a single superconducting gap Δ ~ 2.14 meV, while MoCl is a two-gap superconductor with Δ ~ 1.96 and 1.37 meV. The Z 2 band topology of 2D MX is further demonstrated that MoF and MoCl are candidates for realizing topological superconductivity. Moreover, the Dirac phonons of ZrCl and MoCl contribute w-shape phononic edge states, which are potential for an edge-enhanced electron-phonon coupling. These findings demonstrate that 2D MX offers an attractive platform for exploring the interplay between superconductivity, nontrivial electronic and phononic topology.
Abstract Lattice reconstruction and corresponding strain accumulation plays a key role in defining the electronic structure of two-dimensional moiré superlattices, including those of transition metal dichalcogenides (TMDs). Imaging of TMD moirés has so far provided a qualitative understanding of this relaxation process in terms of interlayer stacking energy, while models of the underlying deformation mechanisms have relied on simulations. Here, we use interferometric four-dimensional scanning transmission electron microscopy to quantitatively map the mechanical deformations through which reconstruction occurs in small-angle twisted bilayer MoS 2 and WSe 2 /MoS 2 heterobilayers. We provide direct evidence that local rotations govern relaxation for twisted homobilayers, while local dilations are prominent in heterobilayers possessing a sufficiently large lattice mismatch. Encapsulation of the moiré layers in hBN further localizes and enhances these in-plane reconstruction pathways by suppressing out-of-plane corrugation. We also find that extrinsic uniaxial heterostrain, which introduces a lattice constant difference in twisted homobilayers, leads to accumulation and redistribution of reconstruction strain, demonstrating another route to modify the moiré potential.