Search NASA⌕ Search

SEARCH · Search NASA

Results for “tunneling spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Conversion of Formic Acid on Single- and Nano-Crystalline Anatase TiO 2 (101)

Understanding thermochemical transformations of formic acid (FA) on metal oxide surfaces is important for many catalytical reactions. Here we study thermally induced reactions of FA on a single-crystalline and nanocrystalline anatase TiO 2 (101). We employ a combination of scanning tunneling microscopy (STM), temperature-programmed desorption (TPD), infrared reflection absorption spectroscopy (IRAS), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and density functional theory (DFT) to follow the FA surface intermediates and reaction products above room temperature. We find that the primary reaction products desorbing at about 300, 480, and 515 K are molecular water, carbon monoxide, and formaldehyde, respectively. Bidentate (BD) formate and bridging hydroxyl (HO b ) are identified as central intermediates in the FA transformations. Bridging oxygen vacancies (V O ) are also likely participants despite their low stability at the surface. In conclusion, the parallel studies on single crystals and faceted TiO 2 (101) nanoparticles reveal the spectroscopic commonalities of surface species and of the thermal conversion of molecular and deprotonated forms of FA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Microscopic Investigation of H 2 Reduced CuO x /Cu(111) and ZnO/CuO x /Cu(111) Inverse Catalysts: STM, AP-XPS, and DFT Studies

Understanding the reduction mechanism of ZnO/CuO x interfaces by hydrogen is of great importance for advancing the performance of industrial catalysts for CO 2 hydrogenation to methanol. Here, the reduction of pristine and ZnO-modified CuO x /Cu(111) by H 2 was investigated using ambient pressure scanning tunnelling microscopy (AP-STM), ambient pressure X-ray photoelectron spectroscopy (AP-XPS) and density functional theory (DFT). The morphological changes and reaction rates seen for the reduction of CuO x /Cu(111) and ZnO/CuO x /Cu(111) are very different. On CuO x /Cu(111), perfect "44" and "29" structures displayed a very low reactivity towards H 2 at room temperature. A long induction period associated with an autocatalytic process was observed to enable the reduction by the removal of chemisorbed non-lattice oxygen initially and lattice oxygen sequentially at the CuO x -Cu interface, which led to formation of oxygen deficient "5-7" hex and honeycomb structures. In the final stages of the reduction process, regions of residual oxygen species and metallic Cu were seen. The addition of ZnO particles to CuO x /Cu(111) opened new reaction channels. On the ZnO sites, the dissociation of H 2 was fast and H adatoms easily migrated to adjacent regions of copper oxide. This hydrogen spillover substantially enhanced the rate of oxygen removal, resulting in the rapid reduction of the copper oxide located in the periphery of the zinc oxide islands with no signs for the reduction of ZnO. The deposited ZnO completely modified the dynamics for H 2 dissociation and hydrogen migration, providing an excellent source for CO 2 hydrogenation processes on the inverse oxide/metal system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

High-Loading Single-Atom Catalyst via On-Surface Synthesis of a Metal-Covalent Organic Framework for Oxygen Reduction Reaction

The development of active catalysts with both high metal efficiency and use of earth abundant metals is the ultimate goal for advancing the required commercially viable and sustainable energy conversion technologies of the future. Metal-organic frameworks (MOFs) have emerged as promising candidates due to their high surface area and tunable active sites. Here, this study aims to fabricate a new type of high metal loading single-atom catalysts (SACs) based on 2D metal-organic covalent organic frameworks (MCOFs) with uniform, active and stable Fe-N 3 sites. The MCOFs were synthesized through an on-surface polymerization process using Fe and melamine as precursors. The polymerization steps were characterized using operando high-pressure scanning tunneling microscopy (HP-STM), in situ X-ray photoelectron spectroscopy (XPS), low-temperature STM (LT-STM), and computational calculations. The synthesized MCOFs demonstrated favorable adsorption and activation of O 2 at the Fe-N 3 sites, and it is predicted to be active for the oxygen reduction reaction (ORR). The surface chemistry and functionality of 2D MCOFs can be rationally designed by varying the metal atoms and organic linkers, offering a versatile platform for diverse applications.

25 ENERGY STORAGE↗
DOE OSTI2020

Realizing gapped surface states in the magnetic topological insulator Mn Bi 2 - x Sb x Te 4

The interplay between magnetism and nontrivial topology in magnetic topological insulators (MTIs) is expected to give rise to exotic topological quantum phenomena like the quantum anomalous Hall effect and the topological axion states. A key to assessing these novel properties is to realize gapped topological surface sates. MnBi 2 Te 4 possesses nontrivial band topology with an intrinsic antiferromagnetic state. However, the highly electron-doped nature of the MnBi 2 Te 4 crystals obstructs the exhibition of the surface band gap. Here, we tailor the material through Sb substitution to reveal the gapped surface states in MnBi 2-x Sb x Te 4 . By shifting the Fermi level into the bulk band gap, we access the surface states and show a band gap of 50 meV at the Dirac point from quasiparticle interference measured by scanning tunneling microscopy (STM). Surface-dominant conduction is confirmed through transport spectroscopy measured by multiprobe STM below the Néel temperature. The surface band gap is robust against the out-of-plane magnetic field despite the promotion of field-induced ferromagnetism. Finally, the realization of bulk-insulating MTIs with the large exchange gap offers a promising platform for exploring emergent topological phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1994

Apparatus Translates Crossed-Laser-Beam Probe Volume

Optomechanical apparatus translates probe volume of crossed-beam laser velocimeter or similar instrument while maintaining optical alignment of beams. Measures velocity, pressure, and temperature of flowing gas at several locations. Repeated tedious realignments no longer necessary. Designed to accommodate stimulated-Raman-gain spectrometer for noninvasive measurement of local conditions in flowing gas in supersonic wind tunnel. Applicable to other techniques like coherent anti-Stokes Raman spectroscopy involving use of laser beams crossed at small angles (10 degrees or less).

Herring, Gregory C.↗
DOE OSTI2024

Distinguishing Elements at the Sub‐Nanometer Scale on the Surface of a High Entropy Alloy

Materials in crystalline form possess translational symmetry (TS) when the unit cell is repeated in real space with long- and short-range orders. The periodic potential in the crystal regulates the electron wave function and results in unique band structures, which further define the physical properties of the materials. Amorphous materials lack TS due to the randomization of distances and arrangements between atoms, causing the electron wave function to lack a well-defined momentum. High entropy materials provide another way to break the TS by randomizing the potential strength at periodic atomic sites. The local elemental distribution has a great impact on physical properties in high entropy materials. It is critical to distinguish elements at the sub-nanometer scale to uncover the correlations between the elemental distribution and the material properties. Here, the use of synchrotron X-ray scanning tunneling microscopy (SX-STM) with sub-nm scale resolution in identifying elements on a high entropy alloy (HEA) surface is demonstrated. By examining the elementally sensitive X-ray absorption spectra with an STM tip to enhance the spatial resolution, the elemental distribution on an HEA's surface at a sub-nm scale is extracted. In conclusion, these results open a pathway towards quantitatively understanding high entropy materials and their material properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Monolayer Superconductivity and Tunable Topological Electronic Structure at the Fe(Te,Se)/Bi 2 Te 3 Interface

The interface between 2D topological Dirac states and an s-wave superconductor is expected to support Majorana-bound states (MBS) that can be used for quantum computing applications. Realizing these novel states of matter and their applications requires control over superconductivity and spin-orbit coupling to achieve spin-momentum-locked topological interface states (TIS) which are simultaneously superconducting. While signatures of MBS have been observed in the magnetic vortex cores of bulk FeTe 0.55 Se 0.45 , inhomogeneity and disorder from doping make these signatures unclear and inconsistent between vortices. In this work, superconductivity is reported in monolayer (ML) FeTe 1–y Se y (Fe(Te,Se)) grown on Bi 2 Te 3 by molecular beam epitaxy (MBE). Spin and angle-resolved photoemission spectroscopy (SARPES) directly resolve the interfacial spin and electronic structure of Fe(Te,Se)/Bi 2 Te 3 heterostructures. For y = 0.25, the Fe(Te,Se) electronic structure is found to overlap with the Bi 2 Te 3 TIS and the desired spin-momentum locking is not observed. In contrast, for y = 0.1, reduced inhomogeneity measured by scanning tunneling microscopy (STM) and a smaller Fe(Te,Se) Fermi surface with clear spin-momentum locking in the topological states are found. Hence, it is demonstrated that the Fe(Te,Se)/Bi 2 Te 3 system is a highly tunable platform for realizing MBS where reduced doping can improve characteristics important for Majorana interrogation and potential applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A variable X-ray chopper system for phase-sensitive detection in synchrotron X-ray scanning tunneling microscopy

An ultra-high-vacuum compatible X-ray chopper system has been designed, constructed and integrated into the XTIP beamline at the Advanced Photon Source at Argonne National Laboratory. The XTIP beamline can operate at soft X-ray energies from 400 eV to 1900 eV while providing a focused beam down to about 10 µm × 10 µm into the synchrotron X-ray scanning tunneling microscopy (SX-STM) endstation instrument. The X-ray chopper is a critical component for separating topographic information from chemical information in SX-STM through phase-sensitive current detection. Depending on the experimental needs, the modulation frequency can be controlled from 100 Hz to 10 kHz. In addition, the chopper system is fully bakeable and can achieve a base pressure of 10 -10 mbar. Facilities for active water cooling have been designed, but passive cooling through copper braids has been shown to be sufficient at standard chopping frequencies. Using an Fe/Al 2 O 3 /CoAl(111) sample, the separation of the SX-STM current into a chemical component and a stable feedback signal is demonstrated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Correlating aluminum layer deposition rates, Josephson junction microstructure, and superconducting qubits’ performance

An ultra-thin aluminum oxide layer is a key component for Josephson junctions (JJ) in superconducting quantum bits (qubits). This layer serves as a barrier layer for Cooper pairs tunneling between the superconducting electrodes and significantly influences the overall performance of the junction. In this study, we investigate the impact of aluminum deposition rates on the microstructure and chemical variation of the aluminum oxide layer, as well as the device's yields and qubits’ lifetimes. Surprisingly, although the oxide layer roughness and thickness variation improve noticeably with an increasing Al deposition rate from 0.5 Å/s to 5 Å/s, the qubit's coherence time is almost unchanged. We attribute this to the fact that Cooper pairs tunnel only through the thinnest region of the barrier. Additionally, we revealed a stress-induced grain boundary sliding short-circuit failure mechanism in the JJ. Our discovery provides a vital understanding of oxide microstructure and JJ functionality, which are critical for improving the coherence time of superconducting qubits.

Coherence time↗
DOE OSTI2025

Characterization of dangling bond defects at the crystalline Si/SiO x interface in a polycrystalline Si passivating contact solar cell at room temperature with electrically detected magnetic resonance spectroscopy

Monocrystalline silicon solar cells can achieve photoconversion efficiencies exceeding 26%; however, performance-limiting defects that trap carriers continue to be a challenge. In this work, we have characterized Si solar cells with tunneling SiO x /polycrystalline-Si (poly-Si) passivating contacts (TOPCon) on As-doped Czochralski Si wafers with electrically detected magnetic resonance (EDMR) spectroscopy. We fabricated 2 × 20 mm 2 TOPCon-like mini solar cells with edge passivation alongside larger 4 cm 2 sister cells and obtained similar device characteristics. We performed EDMR spectroscopy at 300 K on two minicells with different degrees of surface passivation based on the recombination parameter, J o , values of 40 and 310 fA/cm2. We optimized the resolution and the signal-to-noise ratio of the EDMR response of the minicells by varying the forward bias voltage and the magnetic field modulation amplitude. We detect two distinct signals with EDMR spectroscopy, an axial-like signal at g = 2.009, 2.0087, and 2.0015, and an isotropic signal at g = 2.0024, which we attribute to Si dangling bonds (P b0 and P b centers) and boron–oxygen related defects, respectively, at or near the c-Si/SiO x interface. The EDMR signals were lower for the cell with a lower value of J o , while the ratio of the two defect populations was very similar. The EDMR signal increases with forward bias but drops to zero at bias voltages >0.5 V, consistent with interface defects within or near the boron-doped emitter depletion region. Our study demonstrates a method to fabricate minicells that can be characterized with EDMR spectroscopy to detect industrially relevant defects in TOPCon cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Electronic properties of correlated kagomé metals AV 3 Sb 5 (A = K, Rb, and Cs): A perspective

Following the discovery of a new family of kagomé prototypical materials with structure AV 3 Sb 5 (A=K, Rb, and Cs), there has been a heightened interest in studying the correlation-driven electronic phenomena in these kagomé lattice systems. The study of these materials has gone beyond magneto-transport measurements to reveal exciting features such as Dirac bands, anomalous Hall effect, bulk superconductivity with T c ~0.9–2.5K, and the observation of charge density wave instabilities, suggesting an intertwining of topological physics and new quantum orders. Moreover, very recent works on numerous types of experiments have appeared further examining the unconventional superconductivity and the exotic electronic states found within these kagomé materials. Theories on the strong interactions that play a role in these systems have been proposed to shed light on the nature of these topological charge density waves. In this brief review, we summarize these recent experimental findings and theoretical proposals and envision the materials as new platforms to study the interplay between topological physics and strongly correlated electronic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Simultaneous imaging of vibrational, rotational, and electronic wave-packet dynamics in a triatomic molecule

Light-induced molecular dynamics often involve the excitation of several electronic, vibrational, and rotational states. Since the ensuing electronic and nuclear motion determines the pathways and outcomes of photoinduced reactions, our ability to monitor and understand these dynamics is crucial for molecular physics, physical chemistry, and photobiology. However, characterizing this complex motion represents a significant challenge when different degrees of freedom are strongly coupled. In this Letter, we demonstrate how the interplay between vibrational, rotational, and electronic degrees of freedom governs the evolution of molecular wave packets in the low-lying states of strong-field-ionized sulfur dioxide. Using time-resolved Coulomb explosion imaging (CEI) and quantum mechanical wave packet simulations, we directly map the bending vibrations of the molecule, show how the vibrational wave packet is influenced by molecular alignment, and elucidate the consequences of nuclear motion for the coupling between the two lowest electronic states of the cation. Furthermore, our results demonstrate that multicoincident CEI can be an efficient experimental tool for characterizing coupled electronic and nuclear motion in polyatomic molecules.

Atomic & molecular processes in external fields↗
DOE OSTI2020

Semi-adsorption-controlled growth window for half-Heusler FeVSb epitaxial films

The electronic, magnetic, thermoelectric, and topological properties of Heusler compounds (composition XYZ or X 2 YZ) are highly sensitive to stoichiometry and defects. Here we establish the existence and experimentally map the bounds of a semi-adsorption-controlled growth window for semiconducting half-Heusler FeVSb films, grown by molecular beam epitaxy (MBE). We show that due to the high volatility of Sb, the Sb stoichiometry is self-limiting for a finite range of growth temperatures and Sb fluxes, similar to the growth of III-V semiconductors such as GaSb and GaAs. Films grown within this window are nearly structurally indistinguishable by x-ray diffraction (XRD) and reflection high energy electron diffraction (RHEED). Here, the highest electron mobility and lowest background carrier density are obtained towards the Sb-rich bound of the window, suggesting that Sb vacancies may be a common defect. Similar semi-adsorption-controlled bounds are expected for other ternary intermetallics that contain a volatile species Z = {Sb, As, Bi}, e.g., CoTiSb, LuPtSb, GdPtBi, and NiMnSb. However, outstanding challenges remain in controlling the remaining Fe/V (X/Y) transition metal stoichiometry.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Measuring molecular flows with high-resolution stimulated Raman spectroscopy

It is proposed to use high-resolution stimulated Raman spectroscopy to directly measure high-speed molecular flow velocities in wind tunnels and in combustive chambers. A feasibility study indicates that flow speeds from Mach 0.04 up may be measured with the proposed method using available laser systems. It is pointed out that the success of the proposed technique will make it possible to measure all interesting flow parameters, i.e., species concentration, temperature, and velocity, in a time of less than 1 microsecond at a repetition rate of 10,000/s using a single experimental arrangement.

She, C. Y.↗
NASA NTRS1992

Density measurements in an expanding flow using holographic interferometry

A nonequilibrium expansion of nitrogen through a 2-dimensional nozzle of a reflected shock tunnel is investigated with laser holography, time resolved pressure measurements and emission spectroscopy to characterize the flow field for vibrational relaxation measurements. A 2D computation is used to simulate the nozzle flow field. Synthetic holograms are generated using the computed density profiles and are compared with the experimental holograms. Also, using a quasi 1-D approximation, populations for each vibrational level are computed by (1) solving the master equations and (2) using the Landau-Teller formulation. Computational accuracy of both models is assessed against the experimental data.

Sharma, Surendra P.↗
DOE OSTI2023

Polarized tip-enhanced Raman spectroscopy at liquid He temperature in ultrahigh vacuum using an off-axis parabolic mirror

Tip-enhanced Raman spectroscopy (TERS) combines inelastic light scattering well below the diffraction limit down to the nanometer range and scanning probe microscopy and, possibly, spectroscopy. In this way, topographic and spectroscopic as well as single- and two-particle information may simultaneously be collected. While single molecules can now be studied successfully, bulk solids are still not meaningfully accessible. It is the purpose of the work presented here to outline approaches toward this objective. We describe a home-built, liquid helium cooled, ultrahigh vacuum TERS. The setup is based on a scanning tunneling microscope and, as an innovation, an off-axis parabolic mirror having a high numerical aperture of ~0.85 and a large working distance. The system is equipped with a fast load-lock chamber, a chamber for the in situ preparation of tips, substrates, and samples, and a TERS chamber. Base pressure and temperature in the TERS chamber were ~3 × 10 –11 mbar and 15 K, respectively. Polarization dependent tip-enhanced Raman spectra of the vibration modes of carbon nanotubes were successfully acquired at cryogenic temperature. The new features described here including very low pressure and temperature and the external access to the light polarizations, thus the selection rules, may pave the way toward the investigation of bulk and surface materials.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Evolution from Tunneling to Hopping Mediated Triplet Energy Transfer from Quantum Dots to Molecules

Efficient energy transfer is particularly important for multiexcitonic processes like singlet fission and photon upconversion. Observation of the transition from short-range tunneling to long-range hopping during triplet exciton transfer from CdSe nanocrystals to anthracene is reported here. This is firmly supported by steady- state photon upconversion measurements, a direct proxy for the efficiency of triplet energy transfer (TET), as well as transient absorption measurements. When phenylene bridges are initially inserted between a CdSe nanocrystal donor and anthracene acceptor, the rate of TET decreases exponentially, commensurate with a decrease in the photon upconversion quantum efficiency from 11.6% to 4.51% to 0.284%, as expected from a tunneling mechanism. However, as the rigid bridge is increased in length to 4 and 5 phenylene units, photon upconversion quantum efficiencies increase again to 0.468% and 0.413%, 1.5–1.6 fold higher than that with 3 phenylene units (using the convention where the maximum upconversion quantum efficiency is 100%). This suggests a transition from exciton tunneling to hopping, resulting in relatively efficient and distance-independent TET beyond the traditional 1 nm Dexter distance. Transient absorption spectroscopy is used to confirm triplet energy transfer from CdSe to transmitter, and the formation of a bridge triplet state as an intermediate for the hopping mechanism. Lastly, this first observation of the tunneling-to-hopping transition for long-range triplet energy transfer between nanocrystal light absorbers and molecular acceptors suggests that these hybrid materials should further be explored in the context of artificial photosynthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗