Search NASA⌕ Search

SEARCH · Search NASA

Results for “well integrity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Single-ended output GaAs/AlGaAs single quantum well laser with a dry-etched corner reflector

GaAs/AlGaAs single quantum well lasers with integrated corner reflectors have been fabricated using chemically assisted ion beam etching. The air-GaAs interface is internally totally reflecting, and no coherent radiation is transmitted through the corner reflector. The corner reflector laser was compared with a conventional Fabry-Perot laser cleaved from the same wafer. An 11-percent reduction in threshold current and a reduction of the far-field angle from 4.4 deg to 0.7 deg was measured.

Hagberg, M.↗
NASA NTRS1990

Propulsion system-flight control integration-flight evaluation and technology transition

Integration of propulsion and flight control systems and their optimization offering significant performance improvement are assessed. In particular, research programs conducted by NASA on flight control systems and propulsion system-flight control interactions on the YF-12 and F-15 aircraft are addressed; these programs have demonstrated increased thrust, reduced fuel consumption, increased engine life, and improved aircraft performance. Focus is placed on altitude control, speed-Mach control, integrated controller design, as well as flight control systems and digital electronic engine control. A highly integrated digital electronic control program is analyzed and compared with a performance seeking control program. It is shown that the flight evaluation and demonstration of these technologies have been a key part in the transition of the concepts to production and operational use on a timely basis.

Burcham, Frank W., Jr.↗
NASA NTRS1990

Quantum Well Infrared Photodetectors (QWIP)

There has been a lot of interest in III-V long wavelength detectors in the lambda = 8 to 12 micron spectral range as alternatives to HgCdTe. Recently high performance quantum well infrared photodetectors (QWIP) have been demonstrated. They have a responsivity of R = 1.2 A/W, and a detectivity D(exp asterisk) sub lambda = 2 times 10(exp 10) cm Hz(exp 1/2)/W at 68 K for a QWIP with a cutoff wavelength of lambda sub c = 10.7 micron and a R = 1.0 A/W, and D(exp asterisk) sub lambda = 2 times 10(exp 10) cm Hz(exp 1/2)/W at T = 77 K for lambda sub c = 8.4 micron. These detectors consist of 50 periods of molecular beam epitaxy (MBE) grown layers doped n = 1 times 10(exp 18)cm(exp -3) having GaAs quantum well widths of 40 A and barrier widths of 500 A of Al sub x Ga sub 1-x As. Due to the well-established GaAs growth and processing techniques, these detectors have the potential for large, highly uniform, low cost, high performance arrays as well as monolithic integration with GaAs electronics, high speed and radiation hardness. Latest results on the transport physics, device performance and arrays are discussed.

Levine, B. F.↗
NASA NTRS1991

Unsteady Navier-Stokes computations on a wing-body configuration in ramp motions

Unsteady Navier-Stokes computations are conducted for transonic flows over a wing-body configuration undergoing prescribed ramp motions. The ramp motion from 0 to 15 deg includes angles of attack where vortex breakdown is observed experimentally. The vortex breakdown is found to be delayed until after the ramp motion ends. The dynamic effects on the loads are also demonstrated. The moment coefficient is found to be sensitive to the effect of the virtual mass of the fluid. To verify the numerical results, a grid refinement study has been performed for both steady and unsteady flow conditions, by using up to approximately one million grid points. The results show that the coarse grid can give integrated quantities reasonably well, whereas the finer grids give a more detailed flow structure. Comparisons are also made with available steady-state experimental data.

Obayashi, Shigeru↗
NASA NTRS1991

Wing tip vortex calculations with an unstructured adaptive-grid Euler solver

A solution-adaptive grid method has been developed for computing tip-vortex flowfields around rectangular wings. This method uses subdivision in order to locally refine the grid in regions with high vorticity. Two different flow solvers are used. Each solves the three-dimensional Euler equations on unstructured grids. Computed results are compared to experimentally measured surface pressures and vortex velocities on a NACA 0015 rectangular wing. Predicted results for surface pressures and integrated lift agree well with the experimental data. The predicted size of the rotational vortex core is larger than the experimentally-measured value and the peak velocities are less. This discrepancy appears to be caused by deficiencies in the inviscid Euler-equation model. This model cannot capture the complex viscous effects at the tip that determine the detailed structure of the resulting vortex. In spite of this limitation, the present Euler unstructured adaptive-grid method demonstrates the ability to convert vortical flows with low numerical diffusion. Applications for modeling helicopter rotor wake systems are discussed.

Strawn, Roger C.↗
NASA NTRS1992

Prospective new transportation application initiatives in NASA's earth-to-orbit propulsion technology program

NASA's Earth-to-Orbit (ETO) Propulsion Technology Program, a multi-year/multi-task focused technology effort is, today, highly focused on conventional high-thrust cryogenic liquid chemical rocket engines and their envisioned future technology needs. But as highlighted in the U.S. National Ten-Year Space Launch Technology Plan, a set of less-conventional propulsion subjects, ones which offer significant promise for both, improving the state of the art and opening up new propulsion-capability possibilities, is now directed to the space propulsion planning community's attention. In conducting its forward-planning activities, it is highly appropriate that the ETO Program (and other programs as well) carefully consider integrating these "new initiative" subjects into the taskwork of future years. After an introductory consideration of the National Plan's propulsion-related directives, followed by a brief background overview of the ETO Program, the following specific new-initiative candidates are discussed from the standpoint of technology-program planning: operationally efficient propulsion systems; high-thrust hybrid rocket propulsion; low-cost, low-pressure expendable propulsion subsystems; advanced cryogenic in-space propulsion systems; integrated modular engine (IME) configured propulsion systems, and combined-cycle airbreathing/rocket propulsion systems.

Escher, William J. D.↗
NASA NTRS1993

A low-mass faraday cup experiment for the solar wind

Faraday cups have proven to be very reliable and accurate instruments capable of making 3-D velocity distribution measurements on spinning or 3-axis stabilized spacecraft. Faraday cup instrumentation continues to be appropriate for heliospheric missions. As an example, the reductions in mass possible relative to the solar wind detection system about to be flown on the WIND spacecraft were estimated. Through the use of technology developed or used at the MIT Center for Space Research but were not able to utilize for WIND: surface-mount packaging, field-programmable gate arrays, an optically-switched high voltage supply, and an integrated-circuit power converter, it was estimated that the mass of the Faraday Cup system could be reduced from 5 kg to 1.8 kg. Further redesign of the electronics incorporating hybrid integrated circuits as well as a decrease in the sensor size, with a corresponding increase in measurement cycle time, could lead to a significantly lower mass for other mission applications. Reduction in mass of the entire spacecraft-experiment system is critically dependent on early and continual collaborative efforts between the spacecraft engineers and the experimenters. Those efforts concern a range of issues from spacecraft structure to data systems to the spacecraft power voltage levels. Requirements for flight qualification affect use of newer, lighter electronics packaging and its implementation; the issue of quality assurance needs to be specifically addressed. Lower cost and reduced mass can best be achieved through the efforts of a relatively small group dedicated to the success of the mission. Such a group needs a fixed budget and greater control over quality assurance requirements, together with a reasonable oversight mechanism.

Lazarus, A. J.↗
NASA NTRS1957

Experimental Comparison of Speed : Fuel-flow and Speed-area Controls on a Turbojet Engine for Small Step Disturbances

Optimum proportional-plus-integral control settings for speed - fuel-flow control, determined by minimization of integral criteria, correlated well with analytically predicted optimum settings. Engine response data are given for a range of control settings around the optimum. An inherent nonlinearity in the speed-area loop necessitated the use of nonlinear controls. Response data for two such nonlinear control schemes are presented.

ENGINES, CONTROL - TURBOJET↗
NASA NTRS1931

Airfoil Pressure Distribution Investigation in the Variable Density Wind Tunnel

Report presents the results of wind tunnel tests of pressure distribution measurements over one section each of six airfoils. Pressure distribution diagrams, as well as the integrated characteristics of the airfoils, are given for both a high and a low dynamic scale or, Reynolds number VL/V, for comparison with flight and other wind-tunnel tests, respectively. It is concluded that the scale effect is very important only at angles of attack near the burble. The distribution of pressure over an airfoil having a Joukowski section is compared with the theoretically derived distribution. A further study of the distribution of pressure over all of the airfoils resulted in the development of an approximate method of predicting the pressure distribution along the chord of any normal airfoil for all attitudes within the working range if the distribution at one attitude is known.

Jacobs, Eastman N↗
NASA NTRS1993

Design of Center-TRACON Automation System

A system for the automated management and control of terminal area traffic, referred to as the Center-TRACON Automation System (CTAS), is being developed at NASA Ames Research Center. In a cooperative program, NASA and FAA have efforts underway to install and evaluate the system at the Denver area and Dallas/Ft. Worth area air traffic control facilities. This paper will review CTAS architecture, and automation functions as well as the integration of CTAS into the existing operational system. CTAS consists of three types of integrated tools that provide computer-generated advisories for both en-route and terminal area controllers to guide them in managing and controlling arrival traffic efficiently. One tool, the Traffic Management Advisor (TMA), generates runway assignments, landing sequences and landing times for all arriving aircraft, including those originating from nearby feeder airports. TMA also assists in runway configuration control and flow management. Another tool, the Descent Advisor (DA), generates clearances for the en-route controllers handling arrival flows to metering gates. The DA's clearances ensure fuel-efficient and conflict free descents to the metering gates at specified crossing times. In the terminal area, the Final Approach Spacing Tool (FAST) provides heading and speed advisories that help controllers produce an accurately spaced flow of aircraft on the final approach course. Data bases consisting of several hundred aircraft performance models, airline preferred operational procedures, and a three dimensional wind model support the operation of CTAS. The first component of CTAS, the Traffic Management Advisor, is being evaluated at the Denver TRACON and the Denver Air Route Traffic Control Center. The second component, the Final Approach Spacing Tool, will be evaluated in several stages at the Dallas/Fort Worth Airport beginning in October 1993. An initial stage of the Descent Advisor tool is being prepared for testing at the Denver Center in late 1994. Operational evaluations of all three integrated CTAS tools are expected to begin at the two field sites in 1995.

Erzberger, Heinz↗
NASA NTRS1996

Operation of a Radar Altimeter over the Greenland Ice Sheet

This thesis presents documentation for the Advanced Application Flight Experiment (AAFE) pulse compression radar altimeter and its role in the NASA Multisensor Airborne Altimetry Experiment over Greenland in 1993. The AAFE Altimeter is a Ku-band microwave radar which has demonstrated 14 centimeter range precision in operation over arctic ice. Recent repairs and improvements were required to make the Greenland missions possible. Transmitter, receiver and software modifications, as well as the integration of a GPS receiver are thoroughly documented. Procedures for installation, and operation of the radar are described. Finally, suggestions are made for further system improvements.

Grund, Matthew D.↗
NASA NTRS1999

Unsteady Aerodynamics - Subsonic Compressible Inviscid Case

This paper presents a new analytical treatment of Unsteady Aerodynamics - the linear theory covering the subsonic compressible (inviscid) case - drawing on some recent work in Operator Theory and Functional Analysis. The specific new results are: (a) An existence and uniqueness proof for the Laplace transform version of the Possio integral equation as well as a new closed form solution approximation thereof. (b) A new representation for the time-domain solution of the subsonic compressible aerodynamic equations emphasizing in particular the role of the initial conditions.

Balakrishnan, A. V.↗
NASA NTRS1999

Rendering Three-Dimensional Solar Coronal Structures of Active Region 8227

Coronal X-ray and EUV synthesized images are constructed of Active Region 8227 (May-June 1996) and are compared with Yohkoh/SXT, SOHO/EIT, and TRACE observations. Using the rendering technique of Gary (1997) and Alexander, Gary, and Thompson (1998), specific geometric and physical models are used to integrated the plasma emission along the line of sight to obtain a rendered image. The specific instrumental profiles are convolved in the integration process as well as specific heating functions. We analyze coronal X-ray and EUV structures by constructing synthesized image and comparison with observations provide test of specific physical models. We investigate how different pressure distributions within the active region loop system affect the emission characteristics and compare the various results with coronal observations. We investigate how the different heating functions in the active region are reflected in the effect of overall structure of the region. Specific heating rates are tested.

Gary, G. A.↗
NASA NTRS2001

Computational Aeroacoustic Analysis System Development

Many industrial and commercial products operate in a dynamic flow environment and the aerodynamically generated noise has become a very important factor in the design of these products. In light of the importance in characterizing this dynamic environment, Rocketdyne has initiated a multiyear effort to develop an advanced general-purpose Computational Aeroacoustic Analysis System (CAAS) to address these issues. This system will provide a high fidelity predictive capability for aeroacoustic design and analysis. The numerical platform is able to provide high temporal and spatial accuracy that is required for aeroacoustic calculations through the development of a high order spectral element numerical algorithm. The analysis system is integrated with well-established CAE tools, such as a graphical user interface (GUI) through PATRAN, to provide cost-effective access to all of the necessary tools. These include preprocessing (geometry import, grid generation and boundary condition specification), code set up (problem specification, user parameter definition, etc.), and postprocessing. The purpose of the present paper is to assess the feasibility of such a system and to demonstrate the efficiency and accuracy of the numerical algorithm through numerical examples. Computations of vortex shedding noise were carried out in the context of a two-dimensional low Mach number turbulent flow past a square cylinder. The computational aeroacoustic approach that is used in CAAS relies on coupling a base flow solver to the acoustic solver throughout a computational cycle. The unsteady fluid motion, which is responsible for both the generation and propagation of acoustic waves, is calculated using a high order flow solver. The results of the flow field are then passed to the acoustic solver through an interpolator to map the field values into the acoustic grid. The acoustic field, which is governed by the linearized Euler equations, is then calculated using the flow results computed from the flow solver.

Hadid, A.↗
NASA NTRS2003

Lending a Helping Hand

Barrett Technology, Inc., of Cambridge, Massachusetts, received the 2003 Robotic Industries Association s Joseph Engelberger Award for Technology Leadership based on successful commercialization of its novel robotic manipulators. Designed for applications requiring superior adaptability, programmability, and dexterity, Barrett s devices provide state-of-the-art functionality and capability, as well as product integration with existing technology. The cutting-edge robotic manipulators originated through collaboration with NASA, the National Science Foundation, and the U.S. Air Force.

Source record↗
NASA NTRS2003

Status and Performance of HST Wide Field Camera 3

The HST Wide Field Camera 3 is a panchromatic UV-visible-near infrared camera whose development is currently nearing completion, for a planned installation into the Hubble Space Telescope during Servicing Mission 4. WFC3 provides two imaging channels. The UVIS channel features a 4096 x 4096 pixel CCD focal plane with sensitivity from 200 to 1000 nm and a 160 x 160 arcsec field of view. The UVIS channel provides unprecedented sensitivity and field of view in the near ultraviolet for HST. The IR channel features a 1014 x 1014 pixel HgCdTe focal plane covering 850 to 1700 nm with a 135 x 135 arcsec field of view, providing a substantial advance in IR survey efficiency for HST. The construction of WFC3 is nearly complete, and the instrument is well into its integration and test program. We present the current status of the instrument and its projected scientific performance when installed into HST.

Kimble, Randy↗
NASA NTRS2004

Status and Performance of HST/Wide Field Camera 3

The HST Wide Field Camera 3 is a panchromatic UV-visible-near infrared camera whose development is currently nearing completion, for a planned installation into the Hubble Space Telescope during Servicing Mission 4. WFC3 provides two imaging channels. The UVIS channel features a 4096 x 4096 pixel CCD focal plane with sensitivity from 200 to 1000 nm and a 160 x 160 arcsec field of view. The UVIS channel provides unprecedented sensitivity and field of view in the near ultraviolet for HST. The IR channel features a 1014 x 1014 pixel HgCdTe focal plane covering 850 to 1700 nm with a 135 x 135 arcsec field of view, providing an order of magnitude increase in J+H band surveying efficiency for HST. WFC3 offers a rich complement of filters and grisms in each channel. The construction of WFC3 is nearly complete, and the instrument is well into its integration and test program. We present the current status of the instrument and its projected scientific performance.

Kimble, Randy↗
NASA NTRS2004

Status and Performance of HSTNVide Field Camera 3

The HST Wide Field Camera 3 is a panchromatic UV-visible-near infrared camera whose development is currently nearing completion, for a planned installation into the Hubble Space Telescope during Servicing Mission 4. WFC3 provides two imaging channels. The UVIS channel features a 4096 x 4096 pixel CCD focal plane with sensitivity from 200 to 1000 nm and a 160 x 160 arcsec field of view. The UVIS channel provides unprecedented sensitivity and field of view in the near ultraviolet for HST. The IR channel features a 1014 x 1014 pixel HgCdTe focal plane covering 850 to 1700 nm with a 135 x 135 arcsec field of view, providing an order of magnitude increase in J+H band surveying efficiency for HST. WFC3 offers a rich complement of filters and grisms in each channel. The construction of WFC3 is nearly complete, and the instrument is well into its integration and test program. We present the current status of the instrument and its projected scientific performance.

Kimble, Randy↗