Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Analysis of the NASA/MSFC Airborne Doppler Lidar results from San Gorgonio Pass, California

Two days during July of 1981 the NASA/MSFC Airborne Doppler Lidar System (ADLS) was flown aboard the NASA/AMES Convair 990 on the east side of San Gorgonio Pass California, near Palm Springs, to measure and investigate the accelerated atmospheric wind field discharging from the pass. The vertical and horizontal extent of the fast moving atmospheric flow discharging from the San Gorgonio Pass were examined. Conventional ground measurements were also taken during the tests to assist in validating the ADLS results. This particular region is recognized as a high wind resource region and, as such, a knowledge of the horizontal and vertical extent of this flow was of interest for wind energy applications. The statistics of the atmospheric flow field itself as it discharges from the pass and then spreads out over the desert were also of scientific interests. This data provided the first spatial data for ensemble averaging of spatial correlations to compute longitudinal and lateral integral length scales in the longitudinal and lateral directions for both components.

Cliff, W. C.↗

Application of CFD to sonic boom near and mid flow-field prediction

A 3-D parabolized Navier-Stokes (PNS) code was used to calculate the supersonic overpressures from three different geometries at near- and mid-flow fields. Wind tunnel data is used for code validation. Comparison of the computed results with different grid refinements is shown. It is observed that a large number of grid points is needed to resolve the tail shock/expansion fan interaction. Therefore, an adaptive grid approach is employed to calculate the flow field. The agreement between the numerical results and the wind tunnel data confirms that computational fluid dynamics can be applied to the problem of sonic boom prediction.

Cheung, Samson H.↗

Neutral winds above 200 km at high latitudes.

Electrically neutral, luminous clouds are a by-product of chemical releases conducted to create barium ion clouds for the measurement of electric fields. Wind measurements provided by the motions of these clouds are particularly valuable in that the motions can be directly compared with convective ion drift motions to test the importance of ion drag forces. Motion from multiple releases between 200 and 300 km from 15 rockets launched from four high-latitude locations is analyzed in this paper. The observations in the evening and midnight hours at magnetic latitudes above 65 deg strongly suggest that in these regions ion drag is the dominant force in driving neutral winds between 200 and 300 km. In the morning sector, it is evident that neutral wind observations cannot be directly interpreted in terms of ion drag; other factors must be considered.

Meriwether, J. W.↗

Lagrangian mixed layer modeling of the western equatorial Pacific

Processes that control the upper ocean thermohaline structure in the western equatorial Pacific are examined using a Lagrangian mixed layer model. The one-dimensional bulk mixed layer model of Garwood (1977) is integrated along the trajectories derived from a nonlinear 1 1/2 layer reduced gravity model forced with actual wind fields. The Global Precipitation Climatology Project (GPCP) data are used to estimate surface freshwater fluxes for the mixed layer model. The wind stress data which forced the 1 1/2 layer model are used for the mixed layer model. The model was run for the period 1987-1988. This simple model is able to simulate the isothermal layer below the mixed layer in the western Pacific warm pool and its variation. The subduction mechanism hypothesized by Lukas and Lindstrom (1991) is evident in the model results. During periods of strong South Equatorial Current, the warm and salty mixed layer waters in the central Pacific are subducted below the fresh shallow mixed layer in the western Pacific. However, this subduction mechanism is not evident when upwelling Rossby waves reach the western equatorial Pacific or when a prominent deepening of the mixed layer occurs in the western equatorial Pacific or when a prominent deepening of the mixed layer occurs in the western equatorial Pacific due to episodes of strong wind and light precipitation associated with the El Nino-Southern Oscillation. Comparison of the results between the Lagrangian mixed layer model and a locally forced Eulerian mixed layer model indicated that horizontal advection of salty waters from the central Pacific strongly affects the upper ocean salinity variation in the western Pacific, and that this advection is necessary to maintain the upper ocean thermohaline structure in this region.

Shinoda, Toshiaki↗

Investigation of water vapor motion winds from geostationary satellites

Motions deduced in animated water vapor imagery from geostationary satellites can be used to infer wind fields in cloudless regimes. For the past several years, CIMSS has been exploring this potentially important source of global-scale wind information. Recently, METEOSAT-3 data has become routinely available to both the U.S. operational and research community. Compared with the current GOES satellite, the METEOSAT has a superior resolution (5 km vs. 16 km) in its water vapor channel. Preliminary work: at CIMSS has demonstrated that wind sets derived from METEOSAT water vapor imagery can provide important upper-tropospheric wind information in data void areas, and can positively impact numerical model guidance in meteorological applications. Specifically, hurricane track forecasts can be improved. Currently, we are exploring methods to further improve the derivation and quality of the water vapor wind sets.

Velden, Christopher↗

Polarization Reversal Over Flooded Regions and Applications to Large-Scale Flood Mapping with Spaceborne Scatterometers

We present the polarization reversal in backscatter over flooded land regions, and demonstrate for the first time the utility of spaceborne Ku-band scatterometer for large-scale flood mapping. Scatterometer data were collected over the globe by the NASA Scatterometer (NSCAT) operated at 14 GHz on the Japanese ADEOS spacecraft from September 1996 to June 1997. During this time span, several severe floods occurred. Over most land surface, vertical polarization backscatter (Sigma(sub upsilon(upsilon)) is larger than horizontal polarization backscatter (sigma(sub hh)). Such polarization characteristics is reversed and sigma(sub upsilon(upsilon)) is smaller than sigma(sub hh) over flooded regions, except under a dense forest canopy. The total backscatter from the flooded landscape consists of direct backscatter and boundary-interaction backscatter. The direct term is contributed by direct backscattering from objects protruding above the water surface, and by backscattering from waves on the water surface. The boundary-interaction term is contributed by the forward scattering from the protruding objects and then reflected from the water surface, and also by the forward scattering from these objects after the water-surface reflection. Over flooded regions, the boundary-interaction term is dominant at large incidence angles and the strong water-surface reflection is much larger for horizontal polarization than the vertical one due to the Brewster effect in transverse-magnetic waves. These scattering mechanisms cause the polarization reversal over flooded regions. An example obtained with the Analytic Wave Theory is used to illustrate the scattering mechanisms leading to the polarization reversal. We then demonstrate the utility of spaceborne Ku-band scatterometer for large-scale flood mapping. We process NSCAT data to obtain the polarization ratio sigma(sub hh)/sigma(sub upsilon(upsilon)) with colocated data at incidence angles larger than 40 deg. The results over Asian summer monsoon regions in September-October 1996 indicate flooded areas in many countries such as Bangladesh, India, Lao, Vietnam, Cambodia, and China. Reports documented by the United Nation Department of Humanitarian Affairs (now called UN Office for the Coordination of Humanitarian Affairs) show loss of many lives and severe flood related damages which affected many million people in the corresponding flooded areas. We also map the NSCAT polarization ratio over the same regions in the "dry season" in January 1997 as a reference to confirm our results. Furthermore, we obtain concurrent ocean wind fields also derived from NSCAT data, and Asia topographic data (USGS GTOPO30) to investigate the flooded area. The results show that winds during summer monsoon season blowing inland, which perplex flood problems. Overlaying the topographic map over NSCAT results reveals an excellent correspondence between the confinement of flooded area within the relevant topographic features, which very well illustrates the value of topographic wetness index. Finally, we discuss the applications of future spaceborne scatterometers, including QuikSCAT and Seawinds, for flood mapping over the globe.

Nghiem, Son V.↗

Martian dust threshold measurements: Simulations under heated surface conditions

Diurnal changes in solar radiation on Mars set up a cycle of cooling and heating of the planetary boundary layer, this effect strongly influences the wind field. The stratification of the air layer is stable in early morning since the ground is cooler than the air above it. When the ground is heated and becomes warmer than the air its heat is transferred to the air above it. The heated parcels of air near the surface will, in effect, increase the near surface wind speed or increase the aeolian surface stress the wind has upon the surface when compared to an unheated or cooled surface. This means that for the same wind speed at a fixed height above the surface, ground-level shear stress will be greater for the heated surface than an unheated surface. Thus, it is possible to obtain saltation threshold conditions at lower mean wind speeds when the surface is heated. Even though the mean wind speed is less when the surface is heated, the surface shear stress required to initiate particle movement remains the same in both cases. To investigate this phenomenon, low-density surface dust aeolian threshold measurements have been made in the MARSWIT wind tunnel located at NASA Ames Research Center, Moffett Field, California. The first series of tests examined threshold values of the 100 micron sand material. At 13 mb surface pressure the unheated surface had a threshold friction speed of 2.93 m/s (and approximately corresponded to a velocity of 41.4 m/s at a height of 1 meter) while the heated surface equivalent bulk Richardson number of -0.02, yielded a threshold friction speed of 2.67 m/s (and approximately corresponded to a velocity of 38.0 m/s at a height of 1 meter). This change represents an 8.8 percent decrease in threshold conditions for the heated case. The values of velocities are well within the threshold range as observed by Arvidson et al., 1983. As the surface was heated the threshold decreased. At a value of bulk Richardson number equal to -0.02 the threshold friction speed and threshold wind speed appears to level-off to a constant value. This trend also was observed in the MARSWIT experiments involving the 11 micron sized-silt material.

White, Bruce R.↗

A three-dimensional model of terrain-induced updrafts for movement ecology studies

Abstract Background Spatially explicit simulation models of animal movements through the atmosphere necessarily require a representation of the spatial and temporal variation of atmospheric conditions. In particular, for movements of soaring birds that rely extensively on vertical updrafts to avoid flapping flight, accurate and reliable estimation of the vertical component of wind is critical. The interaction between wind and complex terrain shapes both the horizontal and vertical wind fields, highlighting the need to model the coupling between local terrain features and atmospheric conditions at scales relevant to animal movement. Methods In this work, we propose a new empirical model for estimating the orographic updraft field. The model is developed using computational fluid dynamics simulations of canonical atmospheric conditions over moderately complex terrain. To isolate buoyancy and thermal effects, and focus on terrain-induced effects, we use only simulations of a neutrally stratified atmosphere to develop the model. The model, which we name Engineering Vertical Velocity Estimator (EVVE), is simple to implement and is a function of the underlying terrain elevation map, the desired height above ground level (AGL), and wind conditions at a reference height (80 m). We validate the model with data from the Alaiz mountain (Spain) field campaign. Results Compared to observations, the proposed improved model estimates the updrafts at 120 m AGL with a mean error of 0.11 m/s ( $$\sigma =0.28$$ σ = 0.28 m/s), compared to 0.85 m/s ( $$\sigma =0.58$$ σ = 0.58 m/s) for its baseline. For typical land-based wind turbine hub heights of 80 m AGL, the proposed model has a mean error of 0.04 m/s ( $$\sigma =0.25$$ σ = 0.25 m/s), compared to baseline 0.54 m/s ( $$\sigma =0.45$$ σ = 0.45 m/s) estimations. We illustrate an application of the model in movement ecology by comparing simulated tracks and presence maps of golden eagles ( Aquila chrysaetos ) moving across two distinct landscapes. The tracks and presence maps are obtained using a simple heuristic-based movement model, with the updraft field given by the proposed model and a wind vector-based estimation approach that is currently in wide use in movement ecology studies of raptors and other soaring birds. Conclusions We highlight that movement model results can be sensitive to the underlying orographic updraft model, especially in studies of fine-scale movements in regions of complex topography. We suggest adopting the proposed model rather than the wind vector estimation method for studies of soaring bird movements.

17 WIND ENERGY↗

The revised FLORIDyn model: implementation of heterogeneous flow and the Gaussian wake

In this paper, a new version of the FLOw Redirection and Induction Dynamics (FLORIDyn) model is presented. The new model uses the three-dimensional parametric Gaussian FLORIS model and can provide dynamic wind farm simulations at a low computational cost under heterogeneous and changing wind conditions. Both FLORIS and FLORIDyn are parametric models which can be used to simulate wind farms, evaluate controller performance and can serve as a control-oriented model. One central element in which they differ is in their representation of flow dynamics: FLORIS neglects these and provides a computationally very cheap approximation of the mean wind farm flow. FLORIDyn defines a framework which utilizes this low computational cost of FLORIS to simulate basic wake dynamics. This is achieved by creating so-called observation points (OPs) at each time step at the rotor plane which inherit the turbine state. In this work, we develop the initial FLORIDyn framework further considering multiple aspects. The underlying FLORIS wake model is replaced by a Gaussian wake model. The distribution and characteristics of the OPs are adapted to account for the new parametric model but also to take complex flow conditions into account. To achieve this, a mathematical approach is developed to combine the parametric model and the changing, heterogeneous world conditions and link them with each OP. We also present a computationally lightweight wind field model to allow for a simulation environment in which heterogeneous flow conditions are possible. FLORIDyn is compared to Simulator for Offshore Wind Farm Applications (SOWFA) simulations in three- and nine-turbine cases under static and changing environmental conditions. The results show a good agreement with the timing of the impact of upstream state changes on downstream turbines. They also show a good agreement in terms of how wakes are displaced by wind direction changes and when the resulting velocity deficit is experienced by downstream turbines. A good fit of the mean generated power is ensured by the underlying FLORIS model. In the three-turbine case, FLORIDyn simulates 4 s simulation time in 24.49 ms computational time. The resulting new FLORIDyn model proves to be a computationally attractive and capable tool for model-based dynamic wind farm control.

17 WIND ENERGY↗

Venus mesospheric winds and the carbon monoxide bulge

Recently, our group mapped the CO absorption lines on the disk of Venus in 1988 using the synthetic aperture array at the Owens Valley Radio Observatory. Observations were make in the (0-1) rotational transition of CO at 115 GHz, or a wavelength of 2.6 mm. Systematic variations in the Doppler shifts of the lines (particularly near the limbs) enable the group to directly map the wind field at 100 plus or minus 10 km, the peak altitude for the experimental weighting functions used. These measurements show that the winds are indeed of the order of a 100 m/s at this altitude. Previously, many had assumed that the vertical wind profile would quickly fall to zero above the cloud tops, due to cyclostrophic breakdown. This work is reviewed.

Gurwell, Mark A.↗

Magnetic field signatures near Galileo's closest approach to Gaspra

Two large magnetic field rotations were recorded by the spacecraft Galileo 1 minute before and 2 minutes after its closest approach to the asteroid Gaspra. The timing and the geometry of the field changes suggest a connection with Gaspra, and the events can be interpreted as the result of the draping of the solar wind field around a magnetospheric obstacle. Gaspra's surface field is inferred to be within an order of magnitude of Earth's surface field, and its magnetic moment per unit mass is in the range observed for iron meteorites and highly magnetized chondrites. The location of the magnetic signatures suggests that perturbations are carried by waves in the magnetosonic-whistler mode with wavelengths between electron and ion gyro radii.

Kivelson, M. G.↗

Progress in coherent laser radar

Considerable progress with coherent laser radar has been made over the last few years, most notably perhaps in the available range of high performance devices and components and the confidence with which systems may now be taken into the field for prolonged periods of operation. Some of this increasing maturity was evident at the 3rd Topical Meeting on Coherent Laser Radar: Technology and Applications. Topics included in discussions were: mesoscale wind fields, nocturnal valley drainage and clear air down bursts; airborne Doppler lidar studies and comparison of ground and airborne wind measurement; wind measurement over the sea for comparison with satellite borne microwave sensors; transport of wake vortices at airfield; coherent DIAL methods; a newly assembled Nd-YAG coherent lidar system; backscatter profiles in the atmosphere and wavelength dependence over the 9 to 11 micrometer region; beam propagation; rock and soil classification with an airborne 4-laser system; technology of a global wind profiling system; target calibration; ranging and imaging with coherent pulsed and CW system; signal fluctuations and speckle. Some of these activities are briefly reviewed.

Vaughan, J. M.↗

Toward Understanding the Differences between Mesoscale and Large-Eddy Simulations of Tropical Cyclones

In this work, we investigate the ability of mesoscale and large-eddy simulation (LES) model configurations to predict the mean wind speed profile within the boundary layer of tropical cyclones (TCs). To this end, we perform idealized simulations of five hypothetical intense storms ranging from categories 1 to 5 on the Saffir–Simpson scale and extract time-averaged quantities near the eyewall region. We compare the model-generated data against mean wind speed profiles compiled from dropsondes launched from reconnaissance aircraft operating in the North Atlantic basin. Our analysis shows that mesoscale- and LES-generated mean wind fields display important differences in the boundary layer, including the magnitude of shear as well as the height where their low-level wind speed maxima are located. In addition, a comparison between the two model configurations with the dropsonde data shows that both modeling approaches are unable to capture the typical structure of mean winds in the lower part of the TC boundary layer (10–500 m), calling into question the use of simulations of near-axisymmetric storms for investigating the wind structure of past events. To better understand these differences, we conduct a momentum-budget analysis and show that modeled turbulent fluxes are underestimated in the mesoscale boundary layer parameterization compared to the LES model. Based on the analysis of the horizontal turbulent fluxes and their potential impact on mean flow quantities, a TC-specific boundary layer parameterization may be needed.

17 WIND ENERGY↗

Ground testing at MSFC

The large-scale field collection of acoustic data and their analysis are described in this review. The entire sound-field program has the purpose of solving complex problems of excessive noise propagation associated with the static test firing of large space-booster powerplants. The site of data collection has been Mississippi Test Facility (MTF), where far-field sound-propagation and correlated meteorological measurements were initiated in 1962. The statistical evaluation of sound-measurement data shows that the polar distribution of sound in the springtime (at MTF) is determined mainly by the temperature field of the atmosphere. Greater deformation of sound-intensity polar distribution occurs in the autumn as a result of the influence of the wind field. The data on sound attenuation as a function of distance from its source revealed attenuation in excess of the expected magnitude. The excess was mainly between 1 and 10 kilometers from the source, with maximum attenuation (17 to 18 decibels) near 6 kilometers. Excess sound attenuation was compared with calculated sound dispersion. For all sound frequencies in all seasons the deviation between reference and empirical attenuation values formed a bell-shaped distribution on a semilogarithmic plot. The physical causes for the sound- attenuation behavior are considered to be atmospheric diffraction and scattering effects. Statistical analysis of sod-intensity extremes indicated amplification of the sound signals by focusing which could be expected along selected azimuths. Empirical amplification values showed the maximum occurring in winter (50 decibels at 22 kilometers). For the analysis of correlation between empirical sound data and local atmospheric sound- propagation conditions, #e concept of analytical classification of sound-velocity profiles has been developed. Examination of over a quarter-million individual sound-velocity profiles indicates that 33 profile types for heights up to 3 kilometers constitute the empirical possibilities of sound-propagation conditions in southeastern United States. Since the focusing qualities of each sound- velocity profile can be determined as a class characteristic, the overall probabilities of focusing occurrence can he obtained. The severity of focusing, as based upon lateral spread of focusing areas, has been determined. The data for MTF indicate focusing is most severe in winter, with the direction toward east being most affected. Sound propagation is a fluctuating phenomenon because atmospheric conditions vary continuously. A measuring system for analyzing the nonstationary sound-propagation phenomena has been established. The analysis of the acoustic fluctuation data is sup- posed to provide "dynamic” perturbation functions of sound, which are to be superimposed on the related characteristic sound-velocity-profile type. The ultimate result of the program will be the establishment of reliable contingency tables showing the relationship between atmospheric parameters and far-field sound intensities. These data will be the basis for more accurate sound-propagation forecasting for static firing tests.

STATIC TESTING↗

Wind Forcing of the North Sea Pole Tide

The Chandler wobble of the earth's rotation has a period near 14 months and sets up the 0.5 cm amplitude pole tide in the deep oceans, However, the pole tide is anomalously large in the North Sea, where the amplitude increases sharply up to 3 cm along the continental coast. It is shown here that the sea levels are well correlated with winds at the pole tide frequency. The Princeton Ocean Model is used to investigate the response of the North Sea to wind forcing. The barotropic numerical ocean model depicts realistic coastlines and bathymetry at 5 ft x 5 ft resolution, with 97 x 73 grid points. The monthly mean wind fields for the 40-year period (1958-1997) from the National Centers for Atmospheric Prediction (NCEP) reanalysis were used to force the model. The winds were converted to stress with a neutral drag coefficient that varied linearly with windspeed (instead of using the NCEP windstress). A 5-day simulation was made for each month until the resulting flow regime came into equilibrium, and model water levels at various station locations were saved for comparison with tidal-gauge observed sea levels from the Permanent Service for Mean Sea Level (PSMSL). The comparison is made for 10 North Sea stations with high quality tide gauge data. We find: (1) good agreement in annual and semi-annual phases and in the trend of amplitude w.r.t. latitude; (2) more importantly for this study, the model-predicted and observed non-seasonal sea level variations show a very significant temporal correlation as well as spectral coherence. However, a large amplitude difference exists between the two sets -- the overall amplitude variability of the observed is generally a factor of 2-3 larger than the model prediction (this same phenomenon has been reported in ocean circulation studies, although the cause is not yet clear.) Our results indicate that the wind forcing is the main cause of the observed large pole tide in the North Sea.

OConnor, W.↗

Compact, Engineered, 2-Micron Coherent Doppler Wind Lidar Prototype for Field and Airborne Validation: Doppler Aerosol WiNd Lidar (DAWN). Interim Review #1 (6 months)

A new project, selected in 2005 by NASA's Science Mission Directorate (SMD), under the Instrument Incubator Program (IIP), will be described. The 3-year effort is intended to design, fabricate, and demonstrate a packaged, rugged, compact, space-qualifiable coherent Doppler wind lidar (DWL) transceiver capable of future validation in an aircraft and/or Unmanned Aerial Vehicle (UAV). The state-of-the-art 2-micron coherent DWL breadboard at NASA/LaRC will be engineered and compactly packaged consistent with future aircraft flights. The packaged transceiver will be integrated into a coherent DWL system test bed at LaRC. Atmospheric wind measurements will be made to validate the packaged technology. This will greatly advance the coherent part of the hybrid DWL solution to the need for global tropospheric wind measurements.

Kavaya, Michael J.↗

The effect of zonal gradients of sea surface temperature on the Indian Ocean winter monsoon

Several global climate simulations by the 7-layer, 8 x 10 GISS climate model were designed to test the contributions of various surface boundary conditions to the global climate. The model was run with the sun fixed at a perpetual January. In a comparison of run #5, in which realistic January surface boundary conditions were used, with run #4, which was the same except that a zonally symmetric climatological January sea surface temperature (SST) field was used, one of the results was that run #5 provided a better simulation of the Indian Ocean monsoon. A further comparison of the wind fields over the Indian Ocean that were generated by these two model runs is presented.

Cohen, C.↗

SASS wind ambiguity removal by direct minimization

An objective analysis procedure is presented which combines Seasat-A satellite scatterometer (SASS) data with other available data on wind speeds by minimizing an objective function of gridded wind speed values. The functions are defined as the loss functions for the SASS velocity data, the forecast, the SASS velocity magnitude data, and conventional wind speed data. Only aliases closest to the analysis were included, and a method for improving the first guess while using a minimization technique and slowly changing the parameters of the problem is introduced. The model is employed to predict the wind field for the North Atlantic on Sept. 10, 1978. Dealiased SASS data is compared with available ship readings, showing good agreement between the SASS dealiased winds and the winds measured at the surface. Expansion of the model to take in low-level cloud measurements, pressure data, and convergence and cloud level data correlations is discussed.

Hoffman, R. N.↗