Search NASA⌕ Search

SEARCH · Search NASA

Results for “AIR TEMPERATURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Effects of High-Temperature Annealing in Air on Hi-Nicalon Fiber-Reinforced Celsian Matrix Composites

BN/SiC-coated Hi-Nicalon fiber-reinforced celsian matrix composites (CMC) were annealed for 100 h in air at various temperatures to 1200 C, followed by flexural strength measurements at room temperature. Values of yield stress and strain, ultimate strength, and composite modulus remain almost unchanged for samples annealed up to 1100 C. A thin porous layer formed on the surface of the 1100 C annealed sample and its density decreased from 3.09 to 2.90 g/cu cm. The specimen annealed at 1200 C gained 0.43 wt%, was severely deformed, and was covered with a porous layer of thick shiny glaze which could be easily peeled off. Some gas bubbles were also present on the surface. This surface layer consisted of elongated crystals of monoclinic celsian and some amorphous phase(s). The fibers in this surface ply of the CMC had broken into small pieces. The fiber-matrix interface strength was characterized through fiber push-in technique. Values of debond stress, alpha(sub d), and frictional sliding stress, tau(sub f), for the as-fabricated CMC were 0.31+/-0.14 GPa and 10.4+/-3.1 MPa, respectively. These values compared with 0.53+/-0.47 GPa and 8.33+/-1.72 MPa for the fibers in the interior of the 1200 C annealed sample, indicating hardly any change in fiber-matrix interface strength. The effects of thermal aging on microstructure were investigated using scanning electron microscopy. Only the surface ply of the 1200 C annealed specimens had degraded from oxidation whereas the bulk interior part of the CMC was unaffected. A mechanism is proposed explaining the various steps involved during the degradation of the CMC on annealing in air at 1200 C.

Bansal, Narottam P.↗
NASA NTRS1977

Development of an experiment for determining the autoignition characteristics of aircraft-type fuels

An experimental test apparatus was developed to determine the autoignition characteristics of aircraft-type fuels in premixing prevaporizing passages at elevated temperatures and pressures. The experiment was designed to permit independent variation and evaluation of the experimental variables of pressure, temperature, flow rate, and fuel-air ratio. A comprehensive review of the autoignition literature is presented. Performance verification tests consisting of measurements of the ignition delay times for several lean fuel-air mixture ratios were conducted using Jet-A fuel at inlet air temperatures in the range 600 K to 900 K and pressures in the range 9 atm to 30 atm.

Spadaccini, L. J.↗
NASA NTRS1985

Measurements of the surface energy budget in the southern Gobi Desert of China, and in the Rocky Mountains of Colorado

Observations of the land surface energy balance were made in the Gobi desert and at two mountain sites in northern Colorado. The Gobi study included 12 days of observations in spring (April 8 to 20, 1984) and 31 days in summer at the same site (June 17 to July 18, 1984). The Colorado study included 126 days (March 13 to July 17, 1984) at a valley site and 34 days (July 31 to September 3, 1984) at a mountain top location. The data for each study included continuous observations of upward and downward radiative fluxes in three wave bands, soil temperature and moisture at four levels, air temperature and humidity at four levels and UVW wind components at three levels. Analyses of the Gobi data include definition of the impact of variable atmospheric moisture on the surface energy balance between spring and summer. In addition, diurnal wind circulations forced by heating of the northern edge of the Tibetan Plateau were observed during both periods.

Reiter, E. R.↗
NASA NTRS1989

Observational results using the microwave temperature profiler during the Airborne Antarctic Ozone Experiment

The Microwave Temperature Profiler (MTP) measures profiles of air temperature versus altitude. The altitude coverage is about 5 km at a flight altitude of 20 km (66,000 feet), and the profiles are obtained every 14 s. The MTP instrument is installed on NASA's ER-2 aircraft, which flew 13 missions over Antarctica during the Airborne Antarctic Ozone Experiment. Altitude temperature profiles were used to derive potential temperature cross sections. These cross sections have been useful in detecting atmospheric waves. Many wave encounters have been identified as 'mountain waves'. The mountain waves are found to extend from the lowest altitudes measured to the highest (about 24 km). The southern part of the Palmer Peninsula was found to be associated with mountain waves more than half the time. Altitude temperature profiles were also used to measure the lapse rate along the flight track. Lapse rate versus latitude plots do not show significant changes at the ozone hole boundary.

Gary, Bruce L.↗
NASA NTRS1992

Intercomparison results for FIFE flux aircraft

Three atmospheric research aircraft were used to explore the atmospheric boundary layer during FIFE: the National Research Council of Canada Twin Otter, the National Center for Atmospheric Research (NCAR) King Air, and the University of Wyoming King Air. The aircraft were used to measure the mean and turbulent structure of the boundary layer and its variation with height, time, and space. These measurements are important to FIFE because they are being used to scale up point surface observations to landscape scales and because they can be used to relate satellite radiance measurements to boundary layer processes. Because the aircraft were used in coordinated flight patterns to investigate changes within and between intensive field campaigns, wing-to-wing intercomparisons were made so that measurements from one aircraft could be related to another. Intercomparisons were flown on 4 days in 1987 and 3 days in 1989. The eddy correlation measurements of the mixed layer fluxes of moisture and sensible heat were of particular interest to FIFE. Sensible heat fluxes agreed within 15 W/sq m and moisture fluxes agreed within 21 W/sq m. Mean wind component differences were within 1.0 m/s, air temperature within 0.3 C, and mixing ratio within 2 g/kg. Standard deviations showed similar good agreement, with mean differences generally less than 0.1 m/s for the wind components and 0.03 C for potential temperature. Intercomparisons between the NCAR King Air and the Twin Otter showed better agreement in 1989 than in 1987. Overall, the results suggest that data from the FIFE boundary layer aircraft will need little correction to account for instrument biases and spurious fluctuations.

Macpherson, J. I.↗
NASA NTRS1937

Electrical Thermometers for Aircraft

Electrical thermometers commonly used on aircraft are the thermoelectric type for measuring engine-cylinder temperatures, the resistance type for measuring air temperatures, and the superheat meters of thermoelectric and resistance types for use on airships. These instruments are described and their advantages and disadvantages enumerated. Methods of testing these instruments and the performance to be expected from each are discussed. The field testing of engine-cylinder thermometers is treated in detail.

Peterson, John B↗
NASA NTRS2007

High Spatial Resolution Thermal Infrared Remote Sensing Data for Analysis of the Atlanta, Georgia, Urban Heat Island Effect and Its Impacts on the Environment

The twenty-first century is the first "urban century" according to the United Nations Development Program. The focus of cities reflects awareness of the growing percentage of the world's population that lives in urban areas. In environmental terms, cities are the original producers of many of the global problems related to waste disposal, air and water pollution, and associated environmental and ecological challenges. Expansion of cities, both in population and areal extent, is a relentless process. In 2000, approximately 3 billion people representing about 40% of the global population, resided in urban areas. Urban population will continue to rise substantially over the next several decades according to UN estimates, and most of this growth will Occur in developing countries. The UN estimates that by 2025, 60% of the world's population will live in urban areas. As a consequence, the number of"megacities" (those cities with populations of 10 million inhabitants or more) will increase by 100 by 2025. Thus, there is a critical need to understand urban areas and what their impacts are on environmental, ecological and hydrologic resources, as well as on the local, regional, and even global climate. One of the more egregious side effects of urbanization is the increase in surface and air temperatures that lead to deterioration in air quality. In the United States, under the more stringent air quality guidelines established by the U.S. Environmental Protection Agency in 1997, nearly 300 counties in 34 states will not meet these new air quality standards for ground level ozone. Mitigation of the urban heat island (UHI) effect is actively being evaluated as a possible way to reduce ground ozone levels in cities and assist states in improving air quality. Foremost in the analysis of how the UHI affects air quality and other environmental factors is the use of remote sensing technology and data to characterize urban land covers in sufficient detail to quantifiably measure the impact of increased urban heating on air quality. The urban landscape impacts surface thermal energy exchanges that determine development of the UHI. This paper will illustrate how we are using high spatial remote sensing data collected over the Atlanta, Georgia metropolitan area in conjunction with other geographic information, to perform a detailed urban land cover classification and to determine the contribution of these land covers to the urban heat island effect. Also, the spatial arrangement of the land covers and the impact on urban heating from these selected patterns of development are evaluated. Additionally, this paper will show how these data are being used as inputs to improve air quality modeling for Atlanta, including potential benefits from UHI mitigation.

Quattrochi, Dale A.↗
NASA NTRS1939

A Preliminary Study of the Prevention of Ice on Aircraft by the Use of Engine-exhaust Heat

An investigation was made in the N.A.C.A. ice tunnel at air temperatures from 20 degrees to 28 degrees Fahrenheit and at a velocity of 80 miles per hour to determine whether ice formations on a model wing could be prevented by the use of the heat from the engine-exhaust gas. Various spanwise duct systems were tested in a 6-foot-chord N.A.C.A. 23012 wing model. The formation of ice over the entire wing chord was prevented by the direct heating of the forward 10 percent of the wing by hot air, which was passed through leading-edge ducts. Under dry conditions, enough heat to maintain the temperature of the forward 10 percent of the wing at about 200 degrees Fahrenheit above that of the ambient air was required for the prevention of ice formation. The air temperature in the ducts that was necessary to produce these skin temperatures varied from 360 degrees to 834 degrees Fahrenheit; the corresponding air velocities in the duct were 152 and 45 feet per second. Ice formations at the leading edge were locally prevented by air that passed over the interior of the wing surface at a velocity of 30 feet per second and a temperature of 122 degrees Fahrenheit.

Rodert, Lewis A↗
NASA NTRS2022

Constraining Arctic Climate Projections of Wintertime Warming With Surface Turbulent Flux Observations and Representation of Surface-Atmosphere Coupling

The drivers of rapid Arctic climate change—record sea ice loss, warming SSTs, and a lengthening of the sea ice melt season—compel us to understand how this complex system operates and use this knowledge to enhance Arctic predictability. Changing energy flows sparked by sea ice decline, spotlight atmosphere-surface coupling processes as central to Arctic system function and its climate change response. Despite this, the representation of surface turbulent flux parameterizations in models has not kept pace with our understanding. The large uncertainty in Arctic climate change projections, the central role of atmosphere-surface coupling, and the large discrepancy in model representation of surface turbulent fluxes indicates that these processes may serve as useful observational constraints on projected Arctic climate change. This possibility requires an evaluation of surface turbulent fluxes and their sensitivity to controlling factors (surface-air temperature and moisture differences, sea ice, and winds) within contemporary climate models (here Coupled Model Intercomparison Project 6). The influence of individual controlling factors and their interactions is diagnosed using a multi-linear regression approach. This evaluation is done for four sea ice loss regimes, determined from observational sea ice loss trends, to control for the confounding effects of natural variability between models and observations. The comparisons between satellite- and model-derived surface turbulent fluxes illustrate that while models capture the general sensitivity of surface turbulent fluxes to declining sea ice and to surface-air gradients of temperature and moisture, substantial mean state biases exist. Specifically, the central Arctic is too weak of a heat sink to the winter atmosphere compared to observations, with implications to the simulated atmospheric circulation variability and thermodynamic profiles. Models were found to be about 50% more efficient at turning an air-sea temperature gradient anomaly into a sensible heat flux anomaly relative to observations. Further, the influence of sea ice concentration on the sensible heat flux is underestimated in models compared to observations. The opposite is found for the latent heat flux variability in models; where the latent heat flux is too sensitive to a sea ice concentration anomaly. Lastly, the results suggest that present-day trends in sea ice retreat regions may serve as suitable observational constraints of projected Arctic warming.

turbulent fluxes↗
NASA NTRS2005

Giovanni: A System for Rapid Access, Visualization and Analysis of Earth Science Data Online

Collecting data and understanding data structures traditionally are the first steps that a user must take, before the core investigation can begin. This is a time-consuming and challenging task, especially when science objectives require users to deal with large multi-sensor data that are usually in different formats and internal structures. The Goddard Earth Sciences Data and Information Services Center (GES DISC) has created the GES DISC Interactive Online Visualization and ANalysis Infrastructure, Giovanni, to enable Web-based visualization and analysis of satellite remotely sensed meteorological, oceanographic, and hydrologic data sets, without users having to download data. The current operational Giovanni interfaces provide the capability to process a number of important satellite measurements, such as (1) ozone and other trace gases from TOMS, OMI, HALOE, and MLS; (2) air temperature, water vapor, and geopotential height from AIRS; (3) aerosols from MODIS TerrdAqua, and GOCART model; (4) precipitation from TRMM and ground measurements; (5) chlorophyll and other ocean color products from SeaWiFS and MODIS Aqua; and (6) sea surface temperature from MODIS Aqua. Depending on the input data structure, the system provides simple statistical analysis and creates time-averaged area plot, area-averaged time series, animations, Hovmoller latitude vs. time and longitude vs. time plots, as well as vertical profiles. The inter-comparison interfaces allow a user to compare observations from different instruments, to conduct anomaly analysis, and to study basic relationships between physical parameters. Giovanni handles data with different temporal and spatial resolutions and, thus, enables both regional and global long-term climate research and short-term special events investigation, as well as data validations and assessments. Because of its simplicity of usage, Giovanni is powerful and versatile, able to assist a wide range of users, from the discipline scientists conducting preliminary research in various fields, to students in the classroom learning about weather, climate, and other natural phenomena. Giovanni can be accessed from: http://disc. esfc.nasa.gov/techlab/giovanni/index.shtml

Shen, S.↗
NASA NTRS2021

Summer temperatures during the last glaciation (MIS 5c to MIS 3) inferred from a 50,000-year chironomid record from Füramoos, southern Germany

There is a sparsity of long, continuous palaeotemperature records for the last glacial period in central Europe, particularly for the interval corresponding to Marine Isotope Stages (MIS) 4 and 3. Here we present a new, ca. 50-thousand year (ka)-long chironomid record from Füramoos, southern Germany, covering the interval from MIS 5a to MIS 3 that we use to examine lake development and then to quantitatively reconstruct mean July air temperatures. Chironomid assemblages with high abundances of taxa such as Polypedilum nubeculosum-type, Microtendipes pedellus-type, Cladopelma lateralis-type and Dicrotendipes nervosus-type imply a shallow-lake setting for the majority of the examined interval, which is corroborated by other aquatic remains such as oribatid mites, Sialidae and Ceratopogonidae. Assemblages from the interval ca. 99 to 80 ka (in the region corresponding to the Brörup Interstadial, Stadial B and early Odderade Interstadial) are dominated by taxa such as Tanytarsus glabrescens-type and Tanytarsus mendax-type and indicate relatively warm temperatures. Assemblages from the interval covering ca. 80 to 54 ka (corresponding to the late Odderade, Stadial C, Dürnten Interstadial and Stadial D) are dominated by taxa such as Sergentia coracina-type and Tanytarsus lugens-type and are typical for cooler conditions. Reconstructed July temperatures for the early Würmian (Brörup to early Odderade; ca. 99–80 ka) are 13–14 °C. Values decline to <10 °C during the late Odderade and Stadial C (ca. 80–77 ka) around the MIS 5a/4 transition. This decrease is coeval with a pronounced decrease in Northern Hemisphere summer insolation. Values stay in the range of 9–11 °C during the Dürnten and Stadial D (ca. 54–74.5 ka) and increase again to 12.5 °C during the Bellamont 1 interstadial (ca. 54–46 ka). Reconstructed July temperatures track changes in arboreal pollen percentages at Füramoos and agree with a summer-temperature decrease during the early to mid-Würmian as reported by other palaeotemperature records from Europe and the North Atlantic. Our chironomid record from Füramoos provides valuable new insights into Würmian climate dynamics in Central Europe, and corroborates other temperature reconstructions from the early to mid-Würmian glacial period.

Chironomids↗
NASA NTRS1981

Autoignition characteristics of no. 2 diesel fuel

Parametric tests to map the ignition delay characteristics were conducted at pressures of 3, 4, and 5 atm, inlet air temperatures up to 1150 K and fuel air equivalence ratios ranging from 0.2 to 1.0. Ignition delay times in the range of 6 msec to 60 msec at freestream flow velocities ranging from 10 m/sec to 40 m/sec were obtained. The ignition delay times appeared to correlate with the inverse of pressure and the inverse exponent of temperature.

Tevelde, J. A.↗
NASA NTRS1985

Trends in the Southern Hemisphere

The station data of monthly mean sea level pressure, surface air temperature as well as monthly mean upper air rawinsonde observations were used to study the trends in the southern winter (June, July and August) and summer (December, January and February). This study covers the period 1951 to 1981. Most of the surface data have continuous 31 year records, however, for some high latitude stations, both surface and upper air records started in 1957 or even later. The normalized anomaly for a given variable Z is defined as the departure from the 1951 to 1981 grand mean divided by the standard deviation during the same period. To eliminate the large fluctuations in the data, the 1-3-1 smoothing was applied to the time series of normalized anomalies. The trends of monthly mean temperatures and height from the surface to 200 mb level is documented.

Mo, K. C.↗
NASA NTRS2022

Processing Tomato Production Is Expected to Decrease By 2050 Due to the Projected Increase in Temperature

The global processing tomato production is concentrated in a small number of regions where climate change will have a significant impact on the future supply. Process-based tomato models project that the production in the three main producing countries (the United States, Italy, and China, representing 65% of global production) will decrease 6% by 2050, compared to the baseline period of 1980-2009. The predicted reduction in processing tomato production is due to a simulated increase in air temperature. Under an ensemble of projected climate scenarios, California and Italy might not be able to sustain the current levels of processing tomato production due to water resources constraints. Cooler producing regions, such as China and the northern parts of California, stand to improve their competitive advantage. The projected environmental changes indicate that the main growing regions of processing tomatoes might change in the coming decades.

Tomato production↗
NASA NTRS2008

Heat Transfer in a Superelliptic Transition Duct

Local heat transfer measurements were experimentally mapped using a transient liquid-crystal heat transfer technique on the surface of a circular-to-rectangular transition duct. The transition duct had a length-to-diameter ratio of 1.5 and an exit-plane aspect ratio of 3. The crosssectional geometry was defined by the equation of a superellipse. The cross-sectional area was the same at the inlet and exit but varied up to 15 percent higher through the transition. The duct was preheated to a uniform temperature (nominally 64 C) before allowing room temperature air to be suddenly drawn through it. As the surface cooled, the resulting isothermal contours on the duct surface were revealed using a surface coating of thermochromic liquid crystals that display distinctive colors at particular temperatures. A video record was made of the surface temperature and time data for all points on the duct surfaces during each test. Using this surface temperature-time data together with the temperature of the air flowing through the model and the initial temperature of the model wall, the heat transfer coefficient was calculated by employing the classic one-dimensional, semi-infinite wall heat transfer conduction model. Test results are reported for inlet diameter-based Reynolds numbers ranging from 0.4x106 to 2.4x106 and two grid-generated freestream turbulence intensities of about 1 percent, which is typical of wind tunnels, and up to 16 percent, which may be more typical of real engine conditions.

Poinsatte, Philip↗
NASA NTRS1975

Evaluation of thermal X/5-detector Skylab S-192 data for estimating evapotranspiration and thermal properties of soils for irrigation management

An energy budget approach to evaluating the SKYLAB X/5-detector S-192 data for prediction of soil moisture and evapotranspiration rate was pursued. A test site which included both irrigated and dryland agriculture in Southern Texas was selected for the SL-4 SKYLAB mission. Both vegetated and fallow fields were included. Data for a multistage analysis including ground, NC-130B aircraft, RB-57F aircraft, and SKYLAB altitudes were collected. The ground data included such measurements as gravimetric soil moisture, percent of the ground covered by green vegetation, soil texture, net radiation, soil temperature gradients, surface emittance, soil heat flux, air temperature and humidity gradients, and cultural practices. Ground data were used to characterize energy budgets and to evaluate the utility of an energy budget approach for determining soil moisture differences among twelve specific agricultural fields.

Moore, D. G.↗
NASA NTRS1981

A study of atmospheric diffusion from the LANDSAT imagery

LANDSAT multispectral scanner data of the smoke plumes which originated in eastern Cabo Frio, Brazil and crossed over into the Atlantic Ocean, are analyzed to illustrate how high resolution LANDSAT imagery can aid meteorologists in evaluating specific air pollution events. The eleven LANDSAT images selected are for different months and years. The results show that diffusion is governed primarily by water and air temperature differences. With colder water, low level air is very stable and the vertical diffusion is minimal; but water warmer than the air induces vigorous diffusion. The applicability of three empirical methods for determining the horizontal eddy diffusivity coefficient in the Gaussian plume formula was evaluated with the estimated standard deviation of the crosswind distribution of material in the plume from the LANDSAT imagery. The vertical diffusion coefficient in stable conditions is estimated using Weinstock's formulation. These results form a data base for use in the development and validation of meso scale atmospheric diffusion models.

Dejesusparada, N.↗
NASA NTRS1984

System for indicating fuel-efficient aircraft altitude

A method and apparatus are provided for indicating the altitude at which an aircraft should fly so the W/d ratio (weight of the aircraft divided by the density of air) more closely approaches the optimum W/d for the aircraft. A passive microwave radiometer on the aircraft is directed at different angles with respect to the horizon to determine the air temperature, and therefore the density of the air, at different altitudes. The weight of the aircraft is known. The altitude of the aircraft is changed to fly the aircraft at an altitude at which is W/d ratio more closely approaches the optimum W/d ratio for that aircraft.

Gary, B. L.↗