Search NASA⌕ Search

SEARCH · Search NASA

Results for “AIRFOILS - CASCADES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Experimental investigations on airfoils with different geometries in the domain of high angles of attack-flow separation

Wind tunnel tests were conducted on airfoil models in order to study the flow separation phenomena occurring for high angles of attack. Pressure distribution on wings of different geometries were measured. Results show that for three-dimensional airfoils layout and span lift play a role. Separation effects on airfoils with moderate extension are three-dimensional. The flow domains separated from the air foil must be treated three-dimensionally. The rolling-up of separated vortex layers increases with angle in intensity and induction effect and shows strong nonlinearities. Boundary layer material moves perpendicularly to the flow direction due to the pressure gradients at the airfoil; this has a stabilizing effect. The separation starts earlier with increasing pointed profiles.

Keil, J.↗
NASA NTRS1985

Progress in development of a Navier-Stokes solver for evaluation of iced airfoil performance

A method is being developed for evaluation of the flow field behavior about an airfoil with significant ice accretion on the leading edge. The computer code, being evaluated for this purpose, solves the Navier-Stokes equations in a body-fitted curvilinear coordinate system. This requires the use of a grid generation code to transform the x-y coordinates of the physical space into xi-eta coordinates of the computational space. Evaluation of the suitability of these two codes for predicting iced airfoil performance is presently being carried out in anticipation of use in an overall icing analysis effort. Results of this evaluation to date indicate good correlation with known information on clean airfoils. Preliminary results for rime and glaze, iced airfoil shapes are also presented.

Potapczuk, M. G.↗
NASA NTRS1985

Time-dependent Navier-Stokes computations of separated flows over airfoils

The application of both a central-difference and an upwind implicit approximate factorization Navier-Stokes algorithm to highly separated flow is described. Using the thin-layer approximation, both algorithms are employed to solve the low Reynolds number laminar flow around a circular cylinder with periodic shedding. Results agree with experimental Strouhal numbers to within about 10 percent. A grid refinement study is conducted using the upwind code for both the thin-layer and complete Navier-Stokes approximations. The circular cylinder solution is shown to be highly dependent upon both grid density outward from the body and grid extent. Finally, the thin-layer central-difference code is used to predict the time-accurate unsteady flow about two stalled airfoils. The NACA 0012 airfoil turbulent solutions are periodic with Strouhal numbers of about 0.1; a strong vortex is periodically shed from the leading edge. The LS(1)-0417 airfoil turbulent solution shows a high frequency oscillatory trailing edge separation. The 20 degree NACA 0012 airfoil solution is massively separated, but shows no evidence of periodicity.

Rumsey, C. L.↗
NASA NTRS1985

The computation of viscid/inviscid interaction on airfoils with separated flow

Attention is given to the computation of viscous subsonic and transonic flow over two-dimensional airfoils at high Reynolds numbers, where the boundary layers are thin and turbulent over most of the airfoil and its wake. An attempt is made to develop a fast viscid/inviscid interaction method for the computation of viscous flows over airfoils with extensive low separation regions, which can be used as the basis of predictions of the stalling characteristics of airfoils with reasonable accuracy. These insights are applied in the form of changes to the GRUMFOIL computer code, in order to improve separated flow prediction capabilities.

Melnik, R. E.↗
NASA NTRS1986

Aerodynamic Characteristics of NACA 16-Series Airfoils

Standard data from literature incorporated into program. Comprehensive and easily-accessible data bank of aerodynamic characteristics of NACA 16series airfoils incorporated into AIRFOIL program for use in propeller performance research. Low-drag, high-critical-speed airfoils effective in advanced turbo-prop designs currently under investigation. AIRFOIL written in FORTRAN IV for batch execution.

Maksymiuk, C. M.↗
NASA NTRS1985

Pressure distributions from high Reynolds number tests of a Boeing BAC 1 airfoil in the Langley 0.3-meter transonic cryogenic tunnel

A wind-tunnel investigation designed to test a Boeing advanced-technology airfoil from low to flight-equivalent Reynolds numbers has been completed in the Langley 0.3-Meter Transonic Cryogenic Tunnel. This investigation represents the first in a series of NASA/U.S. industry two-dimensional airfoil studies to be completed in the Advanced Technology Airfoil Test program. Test temperature was varied from ambient to about 100 K at pressures ranging from about 1.2 to 6.0 atm. Mach number was varied from about 0.40 to 0.80. These variables provided a Reynolds number (based on airfoil chord) range from 4.4 X 10 to the 6th power to 50.0 X 10 to the 6th power. All the test objectives were met. The pressure data are presented without analysis in plotted and tabulated formats for use in conjunction with the aerodynamic coefficient data published as NASA TM-81922. At the time of the test, these pressure data were considered proprietary and have only recently been made available by Boeing for general release. Data are included which demonstrate the effects of fixed transition. Also included are remarks on the model design, the model structural integrity, and the overall test experience.

Johnson, W. G., Jr.↗
NASA NTRS1985

Numerical simulation of transonic flow over porous airfoils

A numerical study was made to examine the effect of a porous surface on the aerodynamic performance of a transonic airfoil. The pressure jump across the normal shock wave on the upper surface of the airfoil was reduced by making the surface below the shock porous. The weakened shock is preceded by an oblique shock at the upstream end of the porous surface where air is blown out of the cavity. The lambda shock structure shown in the numerical result qualitatively agrees with that observed in the wind tunnel. According to the present analysis, the porous airfoil has a smaller drag and a higher lift than the solid airfoil.

Chow, C.-Y.↗
NASA NTRS1986

Airfoil aerodynamics in icing conditions

Methods of analyzing and experimentally measuring the effect of ice accretion on airfoil sections are presented. Empirical and analytical methods for predicting airfoil performance degradation due to ice are discussed. Ice simulation techniques for aerodynamic testing are presented and compared to data with actual ice accretions. The results show that simulation techniques to imitate the effect of ice on airfoil performance work well in most cases. Comparisons between predicted and measured airfoil performance with ice accretions are presented. For rime ice cases, the predictions compared well with experiments; but for glaze ice, a need for improved methods are seen.

Bragg, M. B.↗
NASA NTRS1986

An experimental study of the aerodynamics of a NACA 0012 airfoil with a simulated glaze ice accretion

An experimental study was conducted in the Ohio State University subsonic wind tunnel to measure the detailed aerodynamic characteristics of an airfoil with a simulated glaze ice accretion. A NACA 0012 model with interchangeable leading edges and pressure taps every one percent chord was used. Surface pressure and wake data were taken on the airfoil clean, with forced transition and with a simulated glaze ice shape. Lift and drag penalties due to the ice shape were found and the surface pressure clearly showed that large separation bubbles were present. Both total pressure and split-film probes were used to measure velocity profiles, both for the clean model and for the model with a simulated ice accretion. A large region of flow separation was seen in the velocity profiles and was correlated to the pressure measurements. Clean airfoil data were found to compare well to existing airfoil analysis methods.

Bragg, M. B.↗
NASA NTRS1987

High Reynolds Number tests of the NASA SC(2)-0012 airfoil in the Langley 0.3-meter transonic cryogenic tunnel

A wind-tunnel investigation of the NASA SC(2)-0012 airfoil has been conducted in the Langley 0.3-Meter Transonic Cryogenic Tunnel. This investigation supplements the two-dimensional airfoil studies of the Advanced Technology Airfoil Test Program. The Mach number was varied from 0.60 to 0.84. The stagnation temperature and pressure were varied to provide a Reynolds number range from 6 to 40 x 10 to the 6th power based on a 6.0-in. (15.24-cm) airfoil chord. No corrections for wind-tunnel wall interference have been made to the data. The aerodynamic results are presented as integrated force and moment coefficients and pressure distributions without any analysis.

Mineck, Raymond E.↗
NASA NTRS1987

Application of an upwind Navier-Stokes code to two-dimensional transonic airfoil flow

An upwind-biased implicit approximate factorization Navier-Stokes algorithm is applied to a variety of steady transonic airfoil cases, using the NACA 0012, RAE 2822, and Jones supercritical airfoils. The thin-layer form of the compressible Navier-Stokes equations is used. Both the CYBER 205 and CRAY 2 supercomputers are utilized, with average computational speeds of about 18 and 16 microsec/gridpoint/iteration, respectively. Lift curves, drag polars, and variations in drag coefficient with Mach number are determined for the NACA 0012 and Jones supercritical airfoils. Also, several cases are computed for comparison with experiment. The effect of grid density and grid extent on a typical turbulent airfoil solution is shown. An algebraic eddy-viscosity turbulence model is used for all of the computations.

Rumsey, Christopher L.↗
NASA NTRS1987

Effect of a round airfoil nose on leading-edge suction

Kulfan (1979) assumed that the angle of attack for initial vortex separation on a slender wing with rounded leading edges could be obtained by equating the leading-edge suction (LES) and nose drag coefficients. In the present study, this assumption is examined and is shown to predict reasonably well the initial angle of attack at which laminar separation occurs near the airfoil nose. However, the assumption is shown to be slightly less accurate for thick or cambered airfoils. Attainable LES estimated by Kulfan's method seemed to agree well with that obtained from an airfoil aerodynamics code and experimental data on a NACA 64A009 airfoil at M = 0.4 and Re = 0.86 x 10 to the 6th.

Lan, C. Edward↗
NASA NTRS1987

A natural low frequency oscillation in the wake of an airfoil near stalling conditions

An unusually low frequency oscillation in the flow over an airfoil was explored experimentally. Wind tunnel measurements were carried out with a two dimensional airfoil model at a chord Reynolds number of 100,000. During deep stall the usual bluff-body shedding occurred at a Strouhal number. But at the onset of stall a low frequency periodic oscillation occurred, the corresponding Strouhal number being an order of magnitude lower. The phenomenon occurred in relatively unclean flow when the freestream turbulence was raised to 0.4 percent, but did not in the cleaner flow with turbulence intensity of 0.1 percent. It could also be produced by certain high frequency acoustic excitation. Details of the flow field are compared between a case of low frequency oscillation at alpha = 15 deg and a case of bluff-body shedding at alpha = 22.5 deg. The origin of the low frequency oscillation traces to the upper surface of the airfoil and is seemingly associated with the periodic formation and breakdown of a large separation bubble. The intense flow fluctuations impart significant unsteady forces to the airfoil but diminish rapidly within a distance of one chord from the trailing edge.

Zaman, K. B. M. Q.↗
NASA NTRS1988

Measurement of local convective heat transfer coefficients from a smooth and roughened NACA-0012 airfoil: Flight test data

Wind tunnels typically have higher free stream turbulence levels than are found in flight. Turbulence intensity was measured to be 0.5 percent in the NASA Lewis Icing Research Tunnel (IRT) with the cloud making sprays off and around 2 percent with cloud making equipment on. Turbulence intensity for flight conditions was found to be too low to make meaningful measurements for smooth air. This difference between free stream and wing tunnel conditions has raised questions as to the validity of results obtained in the IRT. One objective of these tests was to determine the effect of free stream turbulence on convective heat transfer for the NASA Lewis LEWICE ice growth prediction code. These tests provide in-flight heat transfer data for a NASA-0012 airfoil with a 533 cm chord. Future tests will measure heat transfer data from the same airfoil in the Lewis Icing Research Tunnel. Roughness was obtained by the attachment of small, 2 mm diameter hemispheres of uniform size to the airfoil in three different patterns. Heat transfer measurements were recorded in flight on the NASA Lewis Twin Otter Icing Research Aircraft. Measurements were taken for the smooth and roughened surfaces at various aircraft speeds and angles of attack up to four degrees. Results are presented as Frossling number versus position on the airfoil for various roughnesses and angles of attack.

Newton, James E.↗
NASA NTRS1986

Design and experimental evaluation of a swept supercritical Laminar Flow Control (LFC) airfoil

A large chord swept supercritical laminar flow control (LFC) airfoil was designed, constructed, and tested in the NASA Langley 8-ft Transonic Pressure Tunnel (TPT). The LFC airfoil experiment was established to provide basic information concerning the design and compatibility of high-performance supercritical airfoils with suction boundary layer control achieved through discrete fine slots or porous surface concepts. It was aimed at validating prediction techniques and establishing a technology base for future transport designs and drag reduction. Good agreement was obtained between measured and theoretically designed shockless pressure distributions. Suction laminarization was maintained over an extensive supercritical zone up to high Reynolds numbers before transition gradually moved forward. Full-chord laminar flow was maintained on the upper and lower surfaces at M sub infinity = 0.82 up to R sub c is less than or equal to 12 x 10 to the 6th power. When accounting for both the suction and wake drag, the total drag could be reducted by at least one-half of that for an equivalent turbulent airfoil. Specific objectives for the LFC experiment are given.

Harvey, W. D.↗
NASA NTRS1987

The further development of circulation control airfoils

The performance trends of circulation control airfoils are reviewed and observations are made as to where improvements in performance and expansion of the flight envelope may be feasible. A new analytically defined family of airfoils is suggested, all of which maintain the fore and aft symmetry required for stopped rotor application. It is important to recognize that any improvements in section capabilities may not be totally applicable to the present vehicle operation. It remains for the designers of the rotor system to reappraise the three dimensional operating environment in view of the different airfoil operating characteristics and for the airfoil definitions to be flexible while maintaining satisfactory levels of performance.

Wood, N. J.↗
NASA NTRS1988

Comparison of pressure distributions on model and full-scale NACA 64-621 airfoils with ailerons for wind turbine application

The aerodynamic similarity between a small (4-inch chord) wind tunnel model and a full-scale wind turbine blade (24-foot tip section with a 36-inch chord) was evaluated by comparing selected pressure distributions around the geometrically similar cross sections. The airfoils were NACA 64-621 sections, including trailing-edge ailerons with a width equal to 38 percent of the airfoil chord. The model airfoil was tested in the OSU 6- by 12-inch High Reynolds Number Wind Tunnel; the full-scale blade section was tested in the NASA Langley Research Center 30- by 60-foot Subsonic Wind Tunnel. The model airfoil contained 61 pressure taps connected by embedded tubes to pressure transducers. A belt containing 29 pressure taps was fixed to the full-scale section at midspan to obtain surface pressure data. Lift coefficients were obtained by integrating pressures, and corrections were made for the 3-D effects of blade twist and downwash in the blade tip section. The results of the two different experimental methods correlated well for angles of attack from minus 4 to 36 degrees and aileron reflections from 0 to 90 degrees.

Gregorek, G. M.↗
NASA NTRS1986

High-flaps for natural laminar flow airfoils

A review of the NACA and NASA low-drag airfoil research is presented with particular emphasis given to the development of mechanical high-lift flap systems and their application to general aviation aircraft. These flap systems include split, plain, single-slotted, and double-slotted trailing-edge flaps plus slat and Krueger leading-edge devices. The recently developed continuous variable-camber high-lift mechanism is also described. The state-of-the-art of theoretical methods for the design and analysis of multi-component airfoils in two-dimensional subsonic flow is discussed, and a detailed description of the Langley MCARF (Multi-Component Airfoil Analysis Program) computer code is presented. The results of a recent effort to design a single- and double-slotted flap system for the NASA high speed natural laminar flow (HSNLF) (1)-0213 airfoil using the MCARF code are presented to demonstrate the capabilities and limitations of the code.

Morgan, Harry L.↗