Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALKYLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Dyes, dye-sensitized solar cells, and methods of making and using the same

Provided herein are dyes, dye-sensitized solar cells, and sequential series multijunction dye-sensitized solar cell devices. The dyes include an electron deficient acceptor moiety, a medium electron density π-bridge moiety, and an electron rich donor moiety comprising a biaryl, a substituted biaryl, or an R 1 , R 2 , R 3 substituted phenyl where each of R 1 , R 2 , and R 3 independently comprises H, aryl, multiaryl, alkyl substituted aryl, alkoxy substituted aryl, alkyl substituted multiaryl, alkoxy substituted multiaryl, OR 4 , N(R 5 ) 2 , or a combination thereof; each R 4 independently comprises H, alkyl, aryl, alkyl substituted aryl, alkoxy substituted aryl, or a combination thereof; and each R 5 independently comprises aryl, multiaryl, alkyl substituted aryl, alkoxy substituted aryl, alkyl substituted multiaryl, alkoxy substituted multiaryl, or a combination thereof. The solar cells include a glass substrate, a dye-sensitized active layer, and a redox shuttle. The devices include at least two dye-sensitized solar cells connected in series.

Delcamp, Jared Heath↗

Advances in Process Intensification through Multifunctional Reactor Engineering

This project was designed to advance the art of process intensification leading to a new generation of multifunctional chemical reactors utilizing pulse flow. Experimental testing was performed in order to fully characterize the hydrodynamic operating regimes associated with pulse flow for implementation in commercial applications. Sandia National Laboratories (SNL) operated a pilot-scale multifunctional reactor experiment for operation with and investigation of pulse flow operation. Validation-quality data sets of the fluid dynamics, heat and mass transfer, and chemical kinetics were acquired and shared with Chemical Research and Licensing (CR&L). Experiments in a two-phase air-water system examined the effects of bead diameter in the packing, and viscosity. Pressure signals were used to detect pulsing. Three-phase experiments used immiscible organic and aqueous liquids, and air or nitrogen as the gas phase. Hydrodynamic studies of flow regimes and holdup were performed for different types of packing, and mass transfer measurements were performed for a woven packing. These studies substantiated the improvements in mass transfer anticipated for pulse flow in multifunctional reactors for the acid-catalyzed C4 paraffin/olefin alkylation process. CR&L developed packings for this alkylation process, utilizing their alkylation process pilot facilities in Pasadena, TX. These packings were evaluated in the pilot-scale multifunctional reactor experiments established by Sandia to develop a more fundamental understanding of their role in process intensification. Lummus utilized the alkylation technology developed by CR&L to design and optimize the full commercial process utilizing multifunctional reactors containing the packings developed by CR&L and evaluated by Sandia. This hydrodynamic information has been developed for multifunctional chemical reactors utilizing pulse flow, for the acid-catalyzed C4 paraffin/olefin alkylation process, and is now accessible for use in other technologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Advances in Process Intensification through Multifunctional Reactor Engineering

This project was designed to advance the art of process intensification leading to a new generation of multifunctional chemical reactors utilizing pulse flow. Experimental testing was performed in order to fully characterize the hydrodynamic operating regimes associated with pulse flow for implementation in commercial applications. Sandia National Laboratories (SNL) operated a pilot-scale multifunctional reactor experiment for operation with and investigation of pulse flow operation. Validation-quality data sets of the fluid dynamics, heat and mass transfer, and chemical kinetics were acquired and shared with Chemical Research and Licensing (CR&L). Experiments in a two-phase air-water system examined the effects of bead diameter in the packing, and viscosity. Pressure signals were used to detect pulsing. Three-phase experiments used immiscible organic and aqueous liquids, and air or nitrogen as the gas phase. Hydrodynamic studies of flow regimes and holdup were performed for different types of packing, and mass transfer measurements were performed for a woven packing. These studies substantiated the improvements in mass transfer anticipated for pulse flow in multifunctional reactors for the acid-catalyzed C4 paraffin/olefin alkylation process. CR&L developed packings for this alkylation process, utilizing their alkylation process pilot facilities in Pasadena, TX. These packings were evaluated in the pilot-scale multifunctional reactor experiments established by Sandia to develop a more fundamental understanding of their role in process intensification. Lummus utilized the alkylation technology developed by CR&L to design and optimize the full commercial process utilizing multifunctional reactors containing the packings developed by CR&L and evaluated by Sandia. This hydrodynamic information has been developed for multifunctional chemical reactors utilizing pulse flow, for the acid-catalyzed C4 paraffin/olefin alkylation process, and is now accessible for use in other technologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Copper‐Catalyzed C(sp 3 )−H α‐Acetylation: Generation of Quaternary Centers

Abstract α‐substituted ketones are important chemical targets as synthetic intermediates as well as functionalities in natural products and pharmaceuticals. We report the α‐acetylation of C(sp 3 )−H substrates R−H with arylmethyl ketones ArC(O)Me to provide α‐alkylated ketones ArC(O)CH 2 R at RT with t BuOO t Bu as oxidant via copper(I) ‐diketiminato catalysts. Proceeding via alkyl radicals R•, this method enables α‐substitution with bulky substituents without competing elimination that occurs in more traditional alkylation reactions between enolates and alkyl electrophiles. DFT studies suggest the intermediacy of copper(II) enolates [Cu II ](CH 2 C(O)Ar) that capture alkyl radicals R• to give R−CH 2 C(O)Ar outcompeting dimerization of the copper(II) enolate to give the 1,4‐diketone ArC(O)CH 2 CH 2 C(O)Ar.

Okoromoba, Otome E.↗

Copper‐Catalyzed C(sp 3 )−H α‐Acetylation: Generation of Quaternary Centers

Abstract α‐substituted ketones are important chemical targets as synthetic intermediates as well as functionalities in natural products and pharmaceuticals. We report the α‐acetylation of C(sp 3 )−H substrates R−H with arylmethyl ketones ArC(O)Me to provide α‐alkylated ketones ArC(O)CH 2 R at RT with t BuOO t Bu as oxidant via copper(I) ‐diketiminato catalysts. Proceeding via alkyl radicals R•, this method enables α‐substitution with bulky substituents without competing elimination that occurs in more traditional alkylation reactions between enolates and alkyl electrophiles. DFT studies suggest the intermediacy of copper(II) enolates [Cu II ](CH 2 C(O)Ar) that capture alkyl radicals R• to give R−CH 2 C(O)Ar outcompeting dimerization of the copper(II) enolate to give the 1,4‐diketone ArC(O)CH 2 CH 2 C(O)Ar.

Okoromoba, Otome E.↗

Selective Photo‐Oxygenation of Light Alkanes Using Iodine Oxides and Chloride

Abstract Partial oxidation of light alkanes to generate alkyl esters has been achieved under photochemical conditions using mixtures of iodine oxides and chloride salts in trifluoroacetic acid (HTFA). The reactions are catalytic in chloride and are successful using compact fluorescent light, but higher yields are obtained using a mercury lamp. In this photo‐initiated oxyesterification process, the robust alkyl ester products are resistant to over‐oxidation, and under optimized conditions yields for alkyl ester production of ∼50 % based on methane, ∼60 % based on ethane (with a total functionalized yield of EtX (X=TFA or Cl) of 80 %) and ∼30 % based on propane have been demonstrated. The reaction also proceeds in aqueous HTFA and dichloroacetic acid with lower yields. Mechanistic studies indicate that the process likely operates by a chlorine hydrogen atom abstraction pathway wherein alkyl radicals are generated, trapped by iodine, and converted to alkyl trifluoroacetates in situ .

Liebov, Nichole S.↗

High-resolution ultrahigh-pressure long column reversed-phase liquid chromatography for top-down proteomics

We report development of an approach providing high-resolution RPLC of proteins and its utility for mass spectrometry-based top-down proteomics. A chromatographic peak capacity of ~450 was achieved for proteins and large polypeptides having MWs up to 43 kDa in the context of proteomics applications. RPLC column lengths from 20 to 200 cm, particle sizes from 1.5 to 5 m, bonding alkyl chains from C1 to C2, C4, C8, and C18, and particle surface structures that spanned porous, superficially porous (porous shell, core-shell), and nonporous were investigated at pressures up to14K psi. Column length was found as the most important factor for >20 kDa proteins in gradient RPLC, and shortening column length degraded RPLC resolution and sensitivity regardless of the size and surface structure of the packing particles used. The alkyl chains bonded to the silica particle surface significantly affected the RPLC recovery and efficiency, and short alkyl C1-C4 phases provided higher sensitivity and resolution than C8 and C18 phases. Long gradient separations (e.g., >10 hours) with long columns (e.g., 100 cm) were particularly effective in conjunction with use of high accuracy mass spectrometers (e.g., the Orbitrap Elite) for top-down proteomics with improved proteoform coverage by allowing multiple HCD, CID, and ETD dissociation modes. It was also found that HCD produced small fragments useful for proteoform identification, while low energy CID and ETD often complemented HCD by providing large fragments.

columns and stationary phases↗

Impact of common clandestine structural modifications on synthetic cathinone “bath salt” pharmacokinetics

Since 2009, the synthetic cathinones (“bath salts”) have risen in popularity as drugs of abuse. However, there are a paucity of studies that have determined the impact of functional group modifications in the synthetic cathinone chemical structures on plasma and central nervous system (CNS) pharmacokinetics. In the present study, we investigated the in vivo plasma and CNS pharmacokinetics of three synthetic cathinones whose structures differ by lengthening of the α-alkyl chain: methylone (-CH{sub 3}), butylone (-CH{sub 2}CH{sub 3}), and pentylone (-CH{sub 2}CH{sub 2}CH{sub 3}). Male Sprague-Dawley rats were treated with a 20 mg/kg subcutaneous dose of the individual synthetic cathinone. Blood samples were obtained at specific times from a jugular vein cannula over an 8 hour period. Over a separate three-hour period, CNS samples were obtained using a microdialysis cannula surgically implanted into the lateral ventricle. In the plasma, pentylone, with the longest α-alkyl chain, displayed the highest C{sub max} and AUC{sub 0–∞}, and the longest t{sub 1/2.} Decreasing the α-alkyl chain length as in butylone and methylone significantly decreased the C{sub max}, AUC{sub 0–∞}, and t{sub 1/2}. The plasma pharmacokinetic values are consistent with the greater lipophilicity associated with α-alkyl side chain lengthening. Conversely, in the CNS, methylone and butylone displayed higher C{sub max} and AUC{sub 0–∞} values than pentylone. These contrary findings in the CNS and plasma demonstrate that lengthening of the α-alkyl chain of methylone, butylone, and pentylone yields differential pharmacokinetic properties in the CNS as compared to the plasma. - Highlights: • Adding α-methyl groups increase synthetic cathinone plasma C{sub max}, AUC{sub 0–∞,} t{sub 1/2.} • Adding α-methyl groups decrease synthetic cathinone CNS C{sub max}, AUC{sub 0–∞,} t{sub 1/2.} • The CNS has greater exposure to the synthetic cathinones as compared to the plasma.

60 APPLIED LIFE SCIENCES↗

Azobenzene-based organic salts with ionic liquid and liquid crystalline properties

Two sets of new azobenzene-based bromide salts are synthesized, and their thermal photochromic properties are studied. Both sets are based on the imidazolium cation. The first set (1) features a symmetric biscation where two imidazolium head groups (Im) with different alkyl chains (Cn) are connected to a central azobenzene unit (Azo): [Azo(C1-Im-Cn) 2 ]; n = 6, 8, 10, 12, 14. The other one contains an n-alkyl-imidazolium cation (Cn-Im) bearing a terminal azobenzene unit (C1-Azo) substituted with an alkoxy chain (O-Cm) of either two (2) or six (3) carbon atoms: [C1-Azo-O-Cm-Im-Cn]; m = 2, n = 8, 10, 12 and m = 6, n = 8, 10, 12, 14, 16. For both cation classes, the influence of alkyl chains of varying length on the thermal phase behavior was investigated by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). For five compounds (Azo(-C1-Im-C12) 2 (1d), Azo(-C1-Im-C12) 2 (1e), C1-Azo-O-C2-Im-C10 (2b), C1-Azo-O-C2-Im-C12 (2c), and C1-Azo-O-C6-Im-C16 (3e)), the formation of a liquid crystalline phase was observed. The biscationic salts (1) are all comparatively high melting organic salts (180–240 °C), and only the two representatives with long alkylchains (C12 and C14) exhibit liquid crystallinity. The monocationic salts with an O–C2 bridge (2) melt between 140 and 170 °C depending on the alkyl chain length, but from an alkyl chain of 10 and more carbon atoms on they form a smectic A liquid crystalline phase. The representatives of the third set with a O–C6 bridge qualify as ionic liquids with melting points less than 100 °C. However, only the representative with a hexadecyl chain forms a liquid crystalline phase. Representative single crystals for all sets of cations could be grown that allowed for single crystal structure analysis. Together with small-angle X-ray scattering experiments they allow for a more detailed understanding of the thermal properties. As a result, through irradiation with UV-light (320–366 nm) all compounds undergo trans–cis isomerization, which reverses under visible light (440 nm).

36 MATERIALS SCIENCE↗

Understanding Trends in Autoignition of Biofuels: Homologous Series of Oxygenated C5 Molecules

Oxygenated biofuels provide a renewable, domestic source of energy that can enable adoption of advanced, high-efficiency internal combustion engines, such as those based on homogeneously charged compression ignition (HCCI). Of key importance to such engines is the cetane number (CN) of the fuel, which is determined by the autoignition of the fuel under compression at relatively low temperatures (550-800 K). For the plethora of oxygenated biofuels possible, it is desirable to know the ignition delay times and the CN of these fuels to help guide conversion strategies so as to focus efforts on the most desirable fuels. For alkanes, the chemical pathways leading to radical chain-branching reactions giving rise to low-temperature autoignition are well-known and are highly coincident with the buildup of reactive radicals such as OH. Key in the mechanisms leading to chain branching are the addition of molecular oxygen to alkyl radicals and the rearrangement and dissociation of the resulting peroxy radials. Prediction of the temperature and pressure dependence of reactions that lead to the buildup of reactive radicals requires a detailed understanding of the potential energy surfaces (PESs) of these reactions. In this study, we used quantum mechanical modeling to systematically compare the effects of oxygen functionalities on these PESs and associated kinetics so as to understand how they affect experimental trends in autoignition and CN. The molecules studied here include pentane, pentanol, pentanal, 2-heptanone, methylpentyl ether, methyl hexanoate, and pentyl acetate. All have a saturated five-carbon alkyl chain with an oxygen functional group attached to the terminal carbon atom. The results of our systematic comparison may be summarized as follows: (1) Oxygen functionalities activate C-H bonds by lowering the bond dissociation energy (BDE) relative to alkanes. (2) The R-OO bonds in peroxy radicals adjacent to carbonyl groups are weaker than corresponding alkyl systems, leading to dissociation of ROO radicals and reducing reactivity and hence CN. (3) Hydrogen atom transfer in peroxy radicals is important in autoignition, and low barriers for ethers and aldehydes lead to high CN. (4) Peroxy radicals formed from alcohols have low barriers to form aldehydes, which reduce the reactivity of the alkyl radical. In conclusion, these findings for the formation and reaction of alkyl radicals with molecular oxygen explain the trend in CN for these common biofuel functional groups.

09 BIOMASS FUELS↗

Complementary Semiconducting Polymer Blends: Influence of Side Chains of Matrix Polymers

The concept of complementary semiconducting polymer blends (c-SPBs) has been recently proposed to achieve enhanced solution processability and/or melt-processing capability for organic electronics. In the previous study, we demonstrated the impact of conjugation-break spacers of matrix polymers. In the current work, we explore the influence of the side chains of the matrix polymer on the physical properties of the pure polymers and their corresponding c-SPBs, including electrical properties and phase transition behaviors. Specifically, six diketopyrrolopyrrole (DPP)-based polymers with pentamethylene conjugation-break spacers (CBSs) and various side chains, including branched-alkyl, triethylene glycol (TEG), and siloxaneterminated side chains, were synthesized and characterized. The UV–vis spectra show that the side chains have a noticeable impact on the intermolecular interactions in the solid states. In addition, side chains also have a significant influence on the thermal behaviors of the polymers. Polymers with asymmetric side chains attached to the same DPP unit exhibit lower melting points compared to the congeners with symmetric side chains. The polymer with both branched-alkyl and TEG side chain exhibits the lowest melting point of 104 °C. As for charge transport properties, polymers with branched-alkyl and/or siloxaneterminated side chains give hole mobilities on the same order of magnitude, whereas the polymers with TEG side chains exhibits much lower mobilities. When c-SPBs with a fully conjugated polymer with branched-alkyl side chains are concerned, the c-SPBs of all polymers, except for the polymer with only TEG side chains (TEG-DPP-C5), show hole mobilities 2 orders of magnitude higher than the corresponding pure matrix polymers. In contrast, TEG-DPP-C5 merely presents an improvement of 20 times, which resulted from the incompatibility of TEG side chains from the matrix polymer and the alkyl side chains from the tie chain polymer. These results provide new insights into structural design for semiconducting materials with both high performance and better processability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Why Two Metals Are Better Than One for Heterodinuclear Cobalt–Zirconium-Catalyzed Kumada Coupling

Heterodinuclear transition metal complexes with a direct metal–metal interaction offer the potential of unique reactivity compared with mononuclear catalysts. Heterodinuclear Co–Zr complexes with phosphinoamide ligands bridging Co and Zr metal centers are effective precatalysts for Kumada C–C bond coupling reactions between alkyl halides and alkyl Grignards. On the other hand, the analogous mononuclear Co tris(phosphinoamine) complex without Zr provides very inefficient catalysis. Here we describe density functional theory calculations that reveal the mechanistic and reactivity impact of the Co–Zr metal–metal interaction and phosphinoamide ligands on alkyl halide–alkyl Grignard Kumada coupling catalysis. The Co–Zr interaction enables two-electron reduction of the precatalyst to form an active catalyst, which then allows a low-energy electron-transfer alkyl halide oxidative addition mechanism. The Co–Zr interaction and the phosphinoamide ligands bridging the metal centers provide a dialkyl intermediate with a low-energy C–C bond forming reductive elimination route through a phosphine dissociation pathway, which is not viable for an analogous mononuclear Co complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanism of Hydrocarbon Functionalization by an Iodate/Chloride System: The Role of Ester Protection

Mixtures of chloride and iodate salts for light alkane oxidation achieve > 20% yield of methyl trifluoroacetate (TFA) from methane with > 85% selectivity (J. Am. Chem. Soc. 2014, 136, 8393-8401). The mechanism of this C–H oxygenation has been probed by examining adamantane as a model substrate. These recent results lend support to the involvement of free radicals. Comparative studies between radical chlorination and iodate/chloride functionalization of adamantane afford statistically identical 3°:2° selectivities (~5.2:1) and kinetic isotope effects for C–H/C–D functionalization {kH/kD = 1.52(3) and 1.6(3)}. Alkane functionalization by iodate/chloride in HTFA is proposed to occur through H-atom abstraction by free radical species including Cl· to give alkyl radicals. Iodine, which forms by in situ reduction of iodate, traps the alkyl radicals as alkyl radicals that are subsequently converted to alkyl esters in HTFA solvent. Importantly, the alkyl ester products (RTFA) are quite stable to further oxidation under the oxidizing conditions due to the protecting nature of the ester moiety.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid Postgrafting Reaction to Prepare Quaternized Polycarbazoles

We report a rapid postgrafting reaction to prepare alkyl ammonium functionalized polycarbazoles from a commercially available monomer. This novel synthetic approach provides benefit to preparing the high molecular weight quaternized polycarbazoles within 1 h of Friedel–Crafts polycondensation, avoiding the synthesis and purification step to prepare a functionalized monomer. The postgrafting reaction produces hexyl alkyl ammonium functionalized polycarbazole with 100% grafting degree. However, the postgrafting reaction produced only 60% grafting with propyl alkyl ammonium due to the competitive elimination reaction because of the higher acidity of β-hydrogen in the propyl alkyl group resulting from the proximity of the bromide and ammonium groups. The hexyl alkyl ammonium functionalized polycarbazole has a high hydroxide conductivity of 103 mS cm –1 at 80 °C and showed excellent alkaline stability with less than 3% loss of ion group after 1 M NaOH treatment at 80 °C for 500 h. In conclusion, this study highlights that the postgrafting reaction provides a pathway for the scale-up synthesis of quaternized aryl ether-free polyaromatics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Stable, Anion Conductive, Comb-Shaped Copolymers for Alkaline Fuel Cells

To produce an anion-conductive and durable polymer electrolyte for alkaline fuel cell applications, a series of quaternized poly(2,6-dimethyl phenylene oxide)s containing long alkyl side chains pendant to the nitrogen-centered cation were synthesized using a Menshutkin reaction to form comb-shaped structures. The pendant alkyl chains were responsible for the development of highly conductive ionic domains, as confirmed by small-angle X-ray scattering (SAXS). The comb-shaped polymers having one alkyl side chain showed higher hydroxide conductivities than those with benzyltrimethyl ammonium moieties or structures with more than one alkyl side chain per cationic site. The highest conductivity was observed for comb-shaped polymers with benzyldimethylhexadecyl ammonium cations. The chemical stabilities of the comb-shaped membranes were evaluated under severe, accelerated-aging conditions, and degradation was observed by measuring IEC and ion conductivity changes during aging. The comb-shaped membranes retained their high ion conductivity in 1 M NaOH at 80 degrees C for 2000 h. These cationic polymers were employed as ionomers in catalyst layers for alkaline fuel cells. The results indicated that the C-16 alkyl side chain ionomer had a slightly better initial performance, despite its low IEC value, but very poor durability in the fuel cell. In contrast, 90% of the initial performance was retained for the alkaline fuel cell with electrodes containing the C-6 side chain after 60 h of fuel cell operation.

Li, NW↗

Active species in chloroaluminate ionic liquids catalyzing low-temperature polyolefin deconstruction

Abstract Chloroaluminate ionic liquids selectively transform (waste) polyolefins into gasoline-range alkanes through tandem cracking-alkylation at temperatures below 100 °C. Further improvement of this process necessitates a deep understanding of the nature of the catalytically active species and the correlated performance in the catalyzing critical reactions for the tandem polyolefin deconstruction with isoalkanes at low temperatures. Here, we address this requirement by determining the nuclearity of the chloroaluminate ions and their interactions with reaction intermediates, combining in situ 27 Al magic-angle spinning nuclear magnetic resonance spectroscopy, in situ Raman spectroscopy, Al K-edge X-ray absorption near edge structure spectroscopy, and catalytic activity measurement. Cracking and alkylation are facilitated by carbenium ions initiated by AlCl 3 - tert -butyl chloride (TBC) adducts, which are formed by the dissociation of Al 2 Cl 7 − in the presence of TBC. The carbenium ions activate the alkane polymer strands and advance the alkylation cycle through multiple hydride transfer reactions. In situ 1 H NMR and operando infrared spectroscopy demonstrate that the cracking and alkylation processes occur synchronously; alkenes formed during cracking are rapidly incorporated into the carbenium ion-mediated alkylation cycle. The conclusions are further supported by ab initio molecular dynamics simulations coupled with an enhanced sampling method, and model experiments using n-hexadecane as a feed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Triazolium based ionic liquid crystals: Effect of asymmetric substitution

A new series of ten different asymmetrical 1-dodecyl-3-alkyl-triazolium bromides, [C 12 C n Tr][Br], has been synthesized and their mesomorphic behavior studied by DSC (differential scanning calorimetry), POM (polarizing optical microscopy) and SAXS (small angle X-ray scattering). The influence of the chain length of the triazolium salts is investigated to explore the effect of asymmetric substitution on the phase behaviour of these compounds. For that reason, the length of one alkyl chain was varied from 14 to 1 carbon atoms (n = 14, 12, 10, 8–4, 2, 1) while the other alkyl chain was kept at 12 carbon. Single crystal X-ray structure analysis of compounds [C 12 C 12 Tr][Br] and [C 12 C 5 Tr][Br] reveal that the cations adopt a U-shaped conformation with head-to-head arranged triazolium cores. In contrast, for [C 12 C 1 Tr][Br], a rod like shape of the cation with interdigitated alkyl chains is found. All investigated compounds are thermotropic liquid crystals. Higher ordered smectic phases, smectic C as well as smectic A phases were found depending on the chain length of the cation. Moreover, the clearing point temperature decreases with decreasing chain length with exception for the n-dodecyl-3-alkyltrizoliumbromides with the two shortest alkyl chains, [C 12 C 2 Tr][Br] and [C 12 C 1 Tr][Br], which present higher clearing temperatures (86 and 156 °C) and are structurally distinctly different.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗