Search NASA⌕ Search

SEARCH · Search NASA

Results for “ANNUAL MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Agroecosystem model simulations reveal spatial variability in relative productivity in biomass sorghum and maize in Iowa, USA

Biomass sorghum (Sorghum bicolor L. Moench) is an annual C 4 grass that has emerged as a candidate bioenergy crop but has not been widely grown in the United States. Corn (Zea mays L.), another annual C 4 grass, has been produced on a large scale in the United States for biofuels. Iowa leads the nation in both corn and ethanol production. The high productivity of corn in Iowa creates the research question: could biomass sorghum be as or more productive than corn in the state in terms of bioenergy? Efforts to use crop models to fill the gaps left by field experimentation on biomass sorghum have also been limited thus far. To address our research question, we collected biophysical data on biomass sorghum grown in Iowa for two growing seasons, used them to develop a biomass sorghum module in an agroecosystem model (Agro-IBIS), and predict the potential performance of biomass sorghum across Iowa compared to maize. Despite dry conditions in 2019 and 2020, average biomass sorghum yields were 17.20 Mg ha –1 . By comparison, average corn aboveground biomass was higher in 2020 (22.02 Mg ha –1 ). Soil cores indicated average belowground biomass of 1.46 Mg ha –1 , with roots concentrated near the surface (73% of biomass above 50 cm in a 1 m core). When biomass sorghum model parameters were calibrated with measured values, model output was in close agreement with measured biomass (slope = 0.932, R 2 = 0.91) and evapotranspiration (slope = 0.757, R 2 = 0.64). Subsequent regional simulations revealed a notable latitudinal gradient in biomass sorghum yield, with a strong linear relationship between yield and seasonal growing degree-days (R 2 = 0.89). When these yields were compared to simulated corn aboveground biomass yields, only 3.4% of the state had biomass sorghum yields that were significantly higher than corn. This number was reduced to 0.3% when comparing the crops in terms of energy ethanol yield. Thus, we conclude biomass sorghum must be improved to be competitive with corn as an annual biofuel crop in Iowa. This study provides a baseline against which to compare advancements in sorghum breeding for biomass and stress tolerance in Iowa.

Agro-IBIS↗

The Holy Grail of Resource Assessment: Low Cost Ground-Based Measurements with Good Accuracy

Using performance data from some of the millions of installed photovoltaic (PV) modules with micro-inverters may afford the opportunity to provide ground-based solar resource data critical for developing PV projects. The method used back-solves for the direct normal irradiance (DNI) and the diffuse horizontal irradiance (DHI) from the micro-inverter ac production data. When the derived values of DNI and DHI were then used to model the performance of other PV systems, the annual mean bias deviations were within +/-4%, and only 1% greater than when the PV performance was modeled using high quality irradiance measurements. An uncertainty analysis shows the method better suited for modeling PV performance than using satellite-based global horizontal irradiance.

14 SOLAR ENERGY↗

The Holy Grail of Resource Assessment: Low Cost Ground-Based Measurements with Good Accuracy

Using performance data from some of the millions of installed photovoltaic (PV) modules with micro-inverters may afford the opportunity to provide ground-based solar resource data critical for developing PV projects. The method used back-solves for the direct normal irradiance (DNI) and the diffuse horizontal irradiance (DHI) from the micro-inverter ac production data. When the derived values of DNI and DHI were then used to model the performance of other PV systems, the annual mean bias deviations were within +/- 4%, and only 1% greater than when the PV performance was modeled using high quality irradiance measurements. An uncertainty analysis shows the method better suited for modeling PV performance than using satellite-based global horizontal irradiance.

14 SOLAR ENERGY↗

The Holy Grail of Resource Assessment: Low Cost Ground-Based Measurements with Good Accuracy: Preprint

Using performance data from some of the millions of installed photovoltaic (PV) modules with micro-inverters may afford the opportunity to provide ground-based solar resource data critical for developing PV projects. The method used back-solves for the direct normal irradiance (DNI) and the diffuse horizontal irradiance (DHI) from the micro-inverter ac production data. When the derived values of DNI and DHI were then used to model the performance of other PV systems, the annual mean bias deviations were within plus or minus 4 percent, and only 1 percent greater than when the PV performance was modeled using high quality irradiance measurements. An uncertainty analysis shows the method better suited for modeling PV performance than using satellite-based global horizontal irradiance.

14 SOLAR ENERGY↗

TU-H-207A-01: Development of Conversion Factors to Account for Different CTDI Phantom Setups On a Wide-Beam CT Scanner

Purpose: A fundamental measure performed during an annual physics CT evaluation confirms that system displayed CTDIvol nearly matches the independently measured value in phantom. For wide-beam (z-direction) CT scanners, AAPM Report 111 defined an ideal measurement method; however, the method often lacks practicality. The purpose of this preliminary study is to develop a set of conversion factors for a wide-beam CT scanner, relating the CTDIvol measured with a conventional setup (single CTDI phantom) versus the AAPM Report 111 approach (three abutting CTDI phantoms). Methods: For both the body CTDI and head CTDI, two acquisition setups were used: A) conventional single phantom and B) triple phantom. Of primary concern were the larger nominal beam widths for which a standard CTDI phantom setup would not provide adequate scatter conditions. Nominal beam width (160 or 120 mm) and kVp (100, 120, 140) were modulated based on the underlying clinical protocol. Exposure measurements were taken using a CT pencil ion chamber in the center and 12 o’clock position, and CTDIvol was calculated with ‘nT’ limited to 100 mm. A conversion factor (CF) was calculated as the ratio of CTDIvol measured in setup B versus setup A. Results: For body CTDI, the CF ranged from 1.04 up to 1.10, indicating a 4–10% difference between usage of one and three phantoms. For a nominal beam width of 160 mm, the CF did vary with selected kVp. For head CTDI at nominal beam widths of 120 and 160 mm, the CF was 1.00 and 1.05, respectively, independent of the kVp used (100, 120, and 140). Conclusions: A clear understanding of the manufacturer method of estimating the displayed CTDIvol is important when interpreting annual test results, as the acquisition setup may lead to an error of up to 10%. With appropriately defined CF, single phantom use is feasible.

07 ISOTOPE AND RADIATION SOURCES↗

Estimating and parameterizing mismatch power loss in bifacial photovoltaic systems

Nonuniform irradiance on the rear side of bifacial photovoltaic (PV) systems can cause additional mismatch loss, which may not be appropriately captured in PV energy production estimates and software. We evaluated several scenarios including horizontal single-axis tracking (HSAT) over natural ground-cover and rooftop-mounted systems over high albedo reflective roofs. We found mismatch losses of up to 1.5% annual loss for very close-mounted (0.15 m) rooftop systems, but losses for HSAT systems and high-ground-clearance rooftop systems were lower (<0.5%). A simplified empirical relationship was found that links the spatial variation of irradiance (specifically, the mean absolute difference of irradiance) to the resulting mismatch loss factor, with an R 2 better than .99. Furthermore, this approximate relationship was experimentally validated on mismatched PV modules, and it provides a basis for rapidly estimating bifacial mismatch loss factors for use in hourly PV performance simulations such as PVSyst or SAM. Additional parameters investigated include (a) climate dependence and module orientation, which were not found to have a strong impact on bifacial mismatch losses and (b) PV module fill factor and bifaciality ratio, which did have a strong linear impact on mismatch losses.

14 SOLAR ENERGY↗

Impact of Atmospheric Rivers on Surface Hydrological Processes in Western U.S. Watersheds

Atmospheric rivers (ARs) can significantly modulate surface hydrological processes through the extreme precipitation they produce. Previously, studies have investigated the impact of ARs on individual hydrological processes, but a comprehensive evaluation of ARs’ impact on surface hydrology is lacking. This study used a high-resolution regional climate simulation to quantify the impact of ARs on surface hydrological processes across the western U.S. watersheds. The model performance is evaluated through extensive comparison against observations. Our analysis indicates that ARs produce heavy precipitation but suppress evapotranspiration. Snowpack ablates more during ARs, which is mainly driven by warmer air temperature and increased downward longwave radiation. At the 0oC to 10oC temperature range, ARs increase the probability of snow ablation from 0.33 to 0.57. Soil moisture responds similarly to AR and non-AR precipitation events. The runoff-to-precipitation ratio almost doubles due to modulation by heavy precipitation in the southwestern watersheds or intensification of snow ablation in the northwestern watersheds during AR events compared to non-AR events. From analysis of the relationship between the hydrological responses and different meteorological factors, precipitation, temperature and radiation were identified as the key drivers that distinguish the hydrologic responses between AR and non-AR events. Lastly, analysis of ARs and total runoff at annual scale and April 1st snowpack and winter precipitation shows that ARs explain 30% to 60% of the interannual variance and sharpen the seasonality of water resources availability in the west coast mountain watersheds.

54 ENVIRONMENTAL SCIENCES↗

MO-G-18A-01: Radiation Dose Reducing Strategies in CT, Fluoroscopy and Radiography

Advances in medical x-ray imaging have provided significant benefits to patient care. According to NCRP 160, there are more than 400 million x-ray procedures performed annually in the United States alone that contributes to nearly half of all the radiation exposure to the US population. Similar growth trends in medical x-ray imaging are observed worldwide. Apparent increase in number of medical x-ray imaging procedures, new protocols and the associated radiation dose and risk has drawn considerable attention. This has led to a number of technological innovations such as tube current modulation, iterative reconstruction algorithms, dose alerts, dose displays, flat panel digital detectors, high efficient digital detectors, storage phosphor radiography, variable filters, etc. that are enabling users to acquire medical x-ray images at a much lower radiation dose. Along with these, there are number of radiation dose optimization strategies that users can adapt to effectively lower radiation dose in medical x-ray procedures. The main objectives of this SAM course are to provide information and how to implement the various radiation dose optimization strategies in CT, Fluoroscopy and Radiography. Learning Objectives: To update impact of technological advances on dose optimization in medical imaging. To identify radiation optimization strategies in computed tomography. To describe strategies for configuring fluoroscopic equipment that yields optimal images at reasonable radiation dose. To assess ways to configure digital radiography systems and recommend ways to improve image quality at optimal dose.

60 APPLIED LIFE SCIENCES↗

Bifacial PV System Mismatch Loss Estimation & Parameterization

Non-uniform irradiance on the rear-side of bifacial PV systems can cause additional mismatch loss which may not be appropriately captured in PV energy production estimates and software. We have evaluated several rooftop mounted systems over high albedo reflective roofs. Mismatch losses of up to 2% annual loss for very close-mounted (0.15 m) rooftop systems were found, but losses for high ground-clearance rooftop systems were lower (<0.5%). A simplified empirical relationship was found that links the spatial variation of irradiance (specifically the mean absolute difference of irradiance) to the resulting mismatch loss factor, with a R2 fit better than 0.985. This approximate relationship has been validated by experiments on mismatched PV modules, and provides a basis for fast estimation of bifacial mismatch loss factors for use in hourly PV performance simulations such as PVSyst or SAM.

14 SOLAR ENERGY↗

Hybrid photovoltaic/thermal (PV/T) solar systems simulation with Simulink/Matlab

The purpose of this work consists in thermodynamic modeling of hybrid photovoltaic-thermal (PV/T) solar systems, pursuing a modular strategy approach provided by Simulink/Matlab. PV/T solar systems are a recently emerging solar technology that allows for the simultaneous conversion of solar energy into both electricity and heat. This type of technology present some interesting advantages over the conventional ''side-by-side'' thermal and PV solar systems, such as higher combined electrical/thermal energy outputs per unit area, and a more uniform and aesthetical pleasant roof area. Despite the fact that early research on PV/T systems can be traced back to the seventies, only recently it has gained a renewed impetus. In this work, parametric studies and annual transient simulations of PV/T systems are undertaken in Simulink/Matlab. The obtained results show an average annual solar fraction of 67%, and a global overall efficiency of 24% (i.e. 15% thermal and 9% electrical), for a typical four-person single-family residence in Lisbon, with p-Si cells, and a collector area of 6 m{sup 2}. A sensitivity analysis performed on the PV/T collector suggests that the most important variable that should be addressed to improve thermal performance is the photovoltaic (PV) module emittance. Based on those results, some additional improvements are proposed, such as the use of vacuum, or a noble gas at low-pressure, to allow for the removal of PV cells encapsulation without air oxidation and degradation, and thus reducing the PV module emittance. Preliminary results show that this option allows for an 8% increase on optical thermal efficiency, and a substantial reduction of thermal losses, suggesting the possibility of working at higher fluid temperatures. The higher working temperatures negative effect in electrical efficiency was negligible, due to compensation by improved optical properties. The simulation results are compared with experimental data obtained from other authors and perform reasonably well. The Simulink modeling platform has been mainly used worldwide on simulation of control systems, digital signal processing and electric circuits, but there are very few examples of application to solar energy systems modeling. This work uses the modular environment of Simulink/Matlab to model individual PV/T system components, and to assemble the entire installation layout. The results show that the modular approach strategy provided by Matlab/Simulink environment is applicable to solar systems modeling, providing good code scalability, faster developing time, and simpler integration with external computational tools, when compared with traditional imperative-oriented programming languages. (author)

14 SOLAR ENERGY↗

Plant, microbial and ecosystem carbon use efficiencies interact to stabilize microbial growth as a fraction of gross primary production

Summary The carbon use efficiency of plants ( CUE a ) and microorganisms ( CUE h ) determines rates of biomass turnover and soil carbon sequestration. We evaluated the hypothesis that CUE a and CUE h counterbalance at a large scale, stabilizing microbial growth (μ) as a fraction of gross primary production ( GPP ). Collating data from published studies, we correlated annual CUE a , estimated from satellite imagery, with locally determined soil CUE h for 100 globally distributed sites. Ecosystem CUE e , the ratio of net ecosystem production ( NEP ) to GPP , was estimated for each site using published models. At the ecosystem scale, CUE a and CUE h were inversely related. At the global scale, the apparent temperature sensitivity of CUE h with respect to mean annual temperature ( MAT ) was similar for organic and mineral soils (0.029°C −1 ). CUE a and CUE e were inversely related to MAT , with apparent sensitivities of −0.009 and −0.032°C −1 , respectively. These trends constrain the ratio μ : GPP (= (CUE a × CUE h )/(1 − CUE e )) with respect to MAT by counterbalancing the apparent temperature sensitivities of the component processes. At the ecosystem scale, the counterbalance is effected by modulating soil organic matter stocks. The results suggest that a μ : GPP value of c . 0.13 is a homeostatic steady state for ecosystem carbon fluxes at a large scale.

Sinsabaugh, Robert L.↗

Enriched East Asian oxygen isotope of precipitation indicates reduced summer seasonality in regional climate and westerlies

Speleothem oxygen isotope records over East Asia reveal apparently large and rapid paleoclimate changes over the last several hundred thousand years. However, what the isotopic variation actually represent in terms of the regional climate and circulation is debated. We present an answer that emerges from an analysis of the interannual variation in amount-weighted annual δ 18 O of precipitation over East Asia as simulated by an isotope-enabled model constrained by large-scale atmospheric reanalysis fields. 18 O-enriched years have reduced summer seasonality both in terms of precipitation isotopes and in the large-scale circulation. Changes occur between June and October, where the δ 18 O of precipitation (δ 18 O p ) transitions from the isotopically heavier winter to the lighter summer regime. For 18 O-enriched years, this transition is less pronounced. Variations in precipitation amount alone are insufficient to explain the amount-weighted annual δ 18 O p between 18 O-enriched and 18 O-depleted years. Reduced summer seasonality is also expressed in the low-level monsoonal southerlies and upper-level westerlies; for the latter, the northward migration across the Tibetan Plateau in the summer is less pronounced. Our result thus implicates the westerlies across the plateau as the proximate cause of East Asian paleomonsoon changes, manifested as a modulation of its summer peak.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of Models and Measurements to Estimate Solar Radiation for 1-Axis Tracking Modules at NREL's SRRL: Preprint

Solar radiation reaching photovoltaic (PV) modules on a 1-axis tracking system can be measured by reference cells or thermopiles. The former is often biased due to the reflection of solar radiation by the glass cover of the PV. The uncertainty can be moderated by applying a correction factor, as a function of solar incident angle and the refractive index of the glass, to the measurement. On the other hand, solar radiation on the inclined PV panels can be computed by transposition models using global horizontal irradiance (GHI) observations from thermopiles. This study examines the models and measurements to estimate solar radiation for 1-axis tracking modules at National Renewable Energy Laboratory’s (NREL’s) Solar Radiation Research Laboratory (SRRL). The 1-minute plane-of-array (POA) irradiances in 2019 are computed using the observed GHIs and a transposition model developed by Perez et al. The POA irradiances are compared with the observation by an IMT reference cell and a Kipp & Zonen CM Pyranometer 22 (CMP22) thermopile. For SRRL’s 1-axis tracking system with the annual solar energy of 2323.9 kWh/m2, the POA irradiance is overestimated by ~70 kWh/m2 using the transposition model. This bias is reduced by more than 50% using the IMT measurements calibrated by a correction factor for a PV surface of antireflection coated glass.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Modulation of hydroxyl variability by ENSO in the absence of external forcing

Significance The hydroxyl radical (OH) is central to tropospheric chemistry, but current measurements are insufficient to assess its effects on year-to-year changes in atmospheric methane. We use a 6,000-y control simulation in a global coupled chemistry-climate model to study the natural variability of OH. We find that natural OH variability can produce (unforced) methane trends as large as the observed changes in methane over the last few decades. Additionally, we find a link between OH and La Niña. While we cannot directly measure annual global mean OH, we can use what we know about La Niña to improve our understanding of OH. This may, in turn, improve our understanding of recent methane trends.

58 GEOSCIENCES↗

Annual BTMS Testing Section (SNL)

One of the first milestones of the Behind the Meter Storage (BTMS) program was to develop testing protocols so that the state-of-the-art cell chemistries and form factors could be evaluated against BTMS aggressive performance and lifetime metrics. To help guide this conversation, a pack estimation calculation was run. At the time the team was assuming a worst-case scenario in which the battery alone would need to charge an electric vehicle in 15 minutes with no support from the grid. This calculation varied the amount of current applied by each string or module in the storage system and estimated how many cells (and estimated cost) would be needed to charge an electric vehicle in 15 minutes under the current applied.

25 ENERGY STORAGE↗

Bifacial PV System Mismatch Loss Estimation and Parameterization: Preprint

Non-uniform irradiance on the rear-side of bifacial PV systems can cause additional mismatch loss which may not be appropriately captured in PV energy production estimates and software. We have evaluated several scenarios including horizontal single-axis tracking (HSAT) and rooftop mounted systems over high albedo reflective roofs. Mismatch losses of up to 2% annual loss for very close-mounted (0.15 m) rooftop systems were found, but losses for HSAT systems and high ground-clearance rooftop systems were lower (<0.5%). A simplified empirical relationship was found that links the spatial variation of irradiance (specifically the mean absolute difference of irradiance) to the resulting mismatch loss factor, with a R2 fit better than 0.985. This approximate relationship has been validated by experiments on mismatched PV modules, and provides a basis for fast estimation of bifacial mismatch loss factors for use in hourly PV performance simulations such as PVSyst or SAM.

14 SOLAR ENERGY↗

Evaluation of Models and Measurements to Estimate Solar Radiation for 1-Axis Tracking Modules at NREL’s SRRL

Solar radiation reaching photovoltaic (PV) modules on a 1-axis tracking system can be measured by reference cells or thermopiles. The former is often biased due to the reflection of solar radiation by the glass cover of the PV. The uncertainty can be moderated by applying a correction factor, as a function of solar incident angle and the refractive index of the glass, to the measurement. On the other hand, solar radiation on the inclined PV panels can be computed by transposition models using global horizontal irradiance (GHI) observations from thermopiles. This study examines the models and measurements to estimate solar radiation for 1-axis tracking modules at the National Renewable Energy Laboratory’s (NREL’s) Solar Radiation Research Laboratory (SRRL). The 1-minute plane-of-array (POA) irradiances from 2019 are computed using the observed GHIs and a transposition model developed by Perez et al. The POA irradiances are compared with the observation by an IMT reference cell and a Kipp & Zonen CM Pyranometer 22 (CMP22) thermopile. For the SRRL’s 1-axis tracking system with an annual solar energy of 2323.9 kWh/m 2 , the POA irradiance is overestimated by ~70 kWh/m 2 using the transposition model. This bias is reduced by more than 50% using the IMT measurements calibrated by a correction factor for a PV surface of antireflection coated glass.

POA irradiance↗

Developments in Physics-Based Modeling and Machine Learning for Environmental Effects in Nuclear Materials [Slides]

This presentation is part of an annual review for the new Advanced Materials and Manufacturing Technologies program under the Office of Nuclear Energy within the Department of Energy. This presentation covers advances in physics-based modeling and machine learning for environmental effects in nuclear materials. It discusses efforts in combining density functional theory with machine learning to predict material properties, studying irradiation defect recombination, and improving MOOSE-based tools for crystal plasticity modeling and the Stochastic Tools Module.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗