Search NASA⌕ Search

SEARCH · Search NASA

Results for “Anionic Redox”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Sequential Capacitive Deposition of Ionic Liquids for Conformal Thin Film Coatings on Oxygen Reduction Reaction Electrocatalysts

Ionic liquid (IL)-modified carbon-supported catalysts have demonstrated significant improvements in oxygen reduction reaction (ORR) activity. However, transition of this result from the half-cell to the proton exchange membrane fuel cell (PEMFC) has been challenging. Presented here is a processing methodology that yields the formation of a thin (<2 nm) conformal IL coating on the surface of both three-dimensional electrocatalysts and bulk single crystals through the sequential capacitive deposition (SCD) of anionic and cationic components and their subsequent condensation into a hydrophobic, protic IL. In conclusion, SCD shows promise for IL incorporation into preformed PEMFC catalyst layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Pathways for the Photoreduction of Fumarate on ZnS

Semiconductor mineral particles can act as photocatalysts for organic redox reactions that occur enzymatically in modern biological metabolic pathways. Semiconductor mineral-mediated photocatalysis may have contributed to the prebiotic synthesis of organic acids on the early Earth, but assessing the plausibility of this hypothesis is impeded by the lack of knowledge about the mechanisms for light-driven organic redox reactions on mineral surfaces. We selected one step in the reverse tricarboxylic acid (rTCA) cycle, the reduction of fumarate to succinate, that has been shown to be photocatalyzed by zinc sulfide (ZnS). Using static and time-resolved optical emission and absorption spectroscopy, we studied the adsorption of fumarate and the rates and pathways for charge transfer. We find that ZnS transfers photoexcited electrons to bound and dissolved fumarate on a wide range of time scales but not to succinate, supporting the concept that ZnS mediated photoreduction of fumarate could have operated in oceans of the early Earth. Optical transient absorption (TA) spectroscopy identified a signature tentatively attributed to the fumarate radical anion that is stable for at least 8 ns, providing evidence that fumarate photoreduction under solar illumination levels occurs by successive photoelectron transfer. Finally, the model for electronic excitation, relaxation, and interfacial charge-transfer processes in ZnS provided here will inform all future studies of the photochemical reactions of this mineral.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Kinetics of Radiation-induced Cr( II ) and Cr( III ) Redox Chemistry in Molten LiCl-KCl Eutectic

Chromium (Cr) is a frequent constituent of the metal alloys proposed for molten salt nuclear reactor (MSR) applications, and is typically the least noble metal ion present. Consequently, chromium is preferentially corroded into molten salt solutions. Here, the redox poise and redox cycling of chromium ions in the salt can greatly influence its corrosivity towards structural alloys, ultimately impacting the longevity of MSR systems. Radiation-induced chemistry is expected to play a significant role in determining the chromium oxidation state distribution during MSR operations. In the present research, electron pulse radiolysis techniques were employed to characterize the reactivity of Cr(II) and Cr(III) ions with primary radiolysis products in molten lithium chloride–potassium chloride (LiCl–KCl) eutectic over a temperature range of 400–600 °C. Both chromium oxidation states were found to rapidly react with the primary products of molten chloride salt radiolysis, i.e., the solvated electron (e S - ) and the dichlorine radical anion (Cl 2 ˙ - ). For reactions with the e S - , second-order rate coefficients (k) of k = (4.1 ± 0.2) and (6.1 ± 0.3) × 10 10 M -1 s -1 at 400 °C for Cr(II) and Cr(III), respectively, were determined. Temperature-dependent measurements allowed for the derivation of activation parameters for electron capture by Cr(II) and Cr(III). Both chromium ions also react with Cl 2 ˙ - , k = (7.2 ± 0.3) and (1.4 ± 0.1) × 10 9 M -1 s -1 at 400 °C for Cr(II) and Cr(III), respectively.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2020

Determination of the N–H Bond Dissociation Free Energy in a Pyridine(diimine)molybdenum Complex Prepared by Proton-Coupled Electron Transfer

The pyridine(diimine) molybdenum bis(imido) complex, ( iPr PDI)Mo(=NTol) 2 (Tol = 4-methylphenyl) was synthesized by addition of two equivalents of 4-methylphenylazide to a corresponding molybdenum benzene derivative, ( iPr PDI)Mo(η 6 -C 6 H 6 ) ( iPr PDI = 2,6-(2,6-iPr 2 C 6 H 3 N=CMe) 2 C 5 H 3 N). Protonation of ( iPr PDI)Mo(=NTol) 2 with 2,6-lutinidum triflate yielded a cationic molybdenum amido complex, [( iPr PDI)Mo(NHTol)(=NTol)][OTf], which was further transformed into the neutral molybdenum amido complex, ( iPr PDI)Mo(NHTol)(=NTol) by reduction with zinc powder. A series of spectroscopic, synthetic and pK a determination studies along with electrochemical measurements by the protonation-reduction pathway were used to establish an N–H bond dissociation free energy (BDFE) between 65-69 kcal/mol for the molybdenum imido-amido compound, ( iPr PDI)Mo(NHTol)(=NTol). Full molecule DFT studies provided a computed value of 61 kcal/mol. By contrast, reduction of ( iPr PDI)Mo(=NTol) 2 with KC 8 afforded the corresponding anionic molybdenum complex, K[( iPr PDI)Mo(=NTol) 2 ] that has a potassium cation intercalated with the pyridine and the tolyl groups. Protonation of K[( iPr PDI)Mo(=NTol) 2 ] with the weak amidinium acids [TBD(H)][BArF 24 ] (TBD = triazabicyclodecene, BArF 24 = B[3,5-(CF 3 ) 2 C 6 H 3 ] 4 ) also produced the neutral molybdenum amido complex, ( iPr PDI)Mo(NHTol)(=NTol). Measurement of the pKa and oxidation potential of K[( iPr PDI)Mo(=NTol) 2 ] provided a range of 69-73 kcal/mol for the N–H BDFE of ( iPr PDI)Mo(NHTol)(=NTol), in good agreement with the protonation-reduction route and completing the square scheme. The similar pK a and redox potentials obtained from each pathway demonstrate that both sequences are energetically feasible for PCET events. This study on the determination of N–H BDFE of the molybdenum amido complex renders fundamental insight into the N 2 reduction cycle by proton-coupled electron transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Regulating the Third Metal to Design and Engineer Multilayered NiFeM (M: Co, Mn, and Cu) Nanofoam Anode Catalysts for Anion-Exchange Membrane Water Electrolyzers

In this study, alkaline anion-exchange membrane water electrolyzers (AEMWEs) for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant platinum group metal (PGM)-free catalysts. Herein, the third metal is incorporated into NiFe-based catalysts to regulate their electronic structures and morphologies, aiming to achieve sufficient oxygen evolution reaction (OER) activity and performance in AEMWEs. The ternary NiFeM (M: Cu, Co, or Mn) catalysts are featured with multiple layered structures and nanofoam network morphologies, consisting of highly OER-active amorphous Ni-rich oxide shells and electrically conductive metallic alloy cores. The physical and electronic perturbations to the NiFe induced by a third element lead to a fine-tuning of the redox ability of the metal sites at the reaction centers, which breaks the scaling relationship between OH* and O* intermediates at the reaction centers. Thus, the unique structural configuration and electronic regulation simultaneously benefit catalytic activity and performance improvements. These NiFeM nanofoam catalysts demonstrated promising anode performance in actual AEMWEs, comparable to the IrO 2 reference, especially at high current densities. Notably, using various electrolytes (e.g., KOH solution or pure water) for AEMWEs exhibited a different performance trend among studied NiFeM catalysts, likely due to dynamic changes of catalysts under various OER environments.

25 ENERGY STORAGE↗
DOE OSTI2023

Understanding the mechanisms of anisotropic dissolution in metal oxides by applying radiolysis simulations to liquid-phase TEM

Iron-based redox-active minerals are ubiquitous in soils, sediments, and aquatic systems. Their dissolution is of great importance for microbial impacts on carbon cycling and the biogeochemistry of the lithosphere and hydrosphere. Despite its widespread significance and extensive prior study, the atomic-to-nanoscale mechanisms of dissolution remain poorly understood, particularly the interplay between acidic and reductive processes. Here, we use in situ liquid-phase-transmission electron microscopy (LP-TEM) and simulations of radiolysis to probe and control acidic versus reductive dissolution of akaganeite (β–FeOOH) nanorods. Informed by crystal structure and surface chemistry, the balance between acidic dissolution at rod tips and reductive dissolution at rod sides was systematically varied using pH buffers, background chloride anions, and electron beam dose. We find that buffers, such as bis-tris, effectively inhibited dissolution by consuming radiolytic acidic and reducing species such as superoxides and aqueous electrons. In contrast, chloride anions simultaneously suppressed dissolution at rod tips by stabilizing structural elements while promoting dissolution at rod sides through surface complexation. Dissolution behaviors were systematically varied by shifting the balance between acidic and reductive attacks. The findings show LP-TEM combined with simulations of radiolysis effects can provide a unique and versatile platform for quantitatively investigating dissolution mechanisms, with implications for understanding metal cycling in natural environments and the development of tailored nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Oxidative Addition of Aryl Halides to a Ni(I)-Bipyridine Complex

The oxidative addition of aryl halides to bipyridine- or phenanthroline-ligated nickel(I) is a commonly proposed step in nickel catalysis. However, there is a scarcity of complexes of this type that both are well-defined and undergo oxidative addition with aryl halides, hampering organometallic studies of this process. Here, we report the synthesis of a well-defined Ni(I) complex, [( CO 2 Et bpy)Ni I Cl] 4 . Its solution-phase speciation is characterized by a significant population of monomer and a redox equilibrium that can be perturbed by π-acceptors and σ-donors. 1 reacts readily with aryl bromides, and mechanistic studies are consistent with a pathway proceeding through an initial Ni(I) → Ni(III) oxidative addition to form a Ni(III) aryl species. Such a process was demonstrated stoichiometrically for the first time, affording a structurally characterized Ni(III) aryl complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Radiation‐Induced Defects in Uranyl Trinitrate Solids

Abstract Actinides are inherently radioactive; thus, ionizing radiation is emitted by these elements can have profound effects on its surrounding chemical environment through the formation of free radical species. While previous work has noted that the presence of free radicals in the system impacts the redox state of the actinides, there is little atomistic understanding of how these metal cations interact with free radicals. Herein, we explore the effects of radiation (UV and γ) on three U(VI) trinitrate complexes, M[UO 2 (NO 3 ) 3 ] (where M=K + , Rb + , Cs + ), and their respective nitrate salts in the solid state via electron paramagnetic resonance (EPR) and Raman spectroscopy paired with Density Functional Theory (DFT) methods. We find that the alkali salts form nitrate radicals under UV and γ irradiation, but also note the presence of additional degradation products. M[UO 2 (NO 3 ) 3 ] solids also form nitrate radicals and additional DFT calculations indicate the species corresponds to a change from the bidentate bound nitrate anion into a monodentate NO 3 • radical. Computational studies also highlight the need to include the second sphere coordination environment around the [UO 2 (NO 3 ) 3 ] 0,1 species to gain agreement between the experimental and predicted EPR signatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A System Engineering Approach in the Analysis of Ionic Liquids Properties [Thesis]

Room temperature ionic liquids (RTIL) are ionic compounds, comprised of a cation and anion, in the liquid state at temperatures below 100 ⁰C. There are estimated 10 18 anion and cation combinations, which can create RTILs with unique properties. While the ionic character of RTILs made them attractive in a wide variety of electrochemical applications, their behaviors under electrochemical conditions are not well understood. In this research, we developed a RTIL testbed to investigate how RTILs differ from molecular solvents and electrolytes in electrochemical systems through the study of the effects of their morphology and chemical properties on the electron transfer processes. The test bed is composed of three modules: Electrochemistry, Material characterization, Computational. All modules have been completely developed, verified, and integrated and two of them, i.e., Electrochemistry and Material characterization have been validated in this dissertation. To evaluate the proposed system, experiments were performed on solutions of a redox active species in RTILs. It was found that it is possible to investigate the RTIL's morphology and chemical properties' impact on the electron transfer processes of the solute based on the outcomes and evaluations of tests performed by the RTIL testbed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Electrocatalytic Study of the Oxygen Reduction Reaction at Gold Nanoparticles in the Absence and Presence of Interactions with SnO x Supports

Here we report that density functional theory (DFT) can be used to accurately predict how Au nanoparticle (NP) catalysts cooperate with SnO x ( x = 1.9 or 2.0) supports to carry out the oxygen reduction reaction (ORR). Specifically, dendrimers were used to encapsulate AuNPs and prevent their interactions with the underlying SnO x supports. After removal of the dendrimers, however, the AuNPs are brought into direct contact with the support and hence feel its effect. The results show that both SnO 1.9 and SnO 2.0 supports strongly enhance the electrocatalytic properties of AuNPs for the ORR. In the case of AuNP interaction with a SnO 1.9 support, the number of electrons involved in the ORR ( n eff ) increases from 2.1 ± 0.2 to 2.9 ± 0.1 following removal of the dendrimers, indicating an increased preference for the desired four-electron product (water), while the overpotential decreases by 0.32 V. Similarly, direct interactions between AuNPs and a SnO 2.0 support result in an increase in n eff from 2.2 ± 0.1 to 3.1 ± 0.1 and a reduction of the overpotential by 0.28 V. These experimental results are in excellent agreement with the theoretically predicted onset potential shift of 0.30 V. According to the DFT calculations, the observed activity enhancements are attributed to the existence of anionic Au resulting from electron transfer from surface oxygen vacancies within the SnO x supports to the AuNPs. This theoretical finding was confirmed experimentally using X-ray photoelectron spectroscopy. Importantly, the calculations reported here were performed prior to the experiments. Furthermore, this study represents an unusual case of theory accurately predicting the electrocatalytic manifestation of strong metal support interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Poly(vinylferrocene) as an Ionomer and Sulfur-Confining Additive for Lithium–Sulfur Batteries

Lithium-sulfur (Li-S) batteries are promising owing to their high energy density, environmental benignity, and low cost. Most of the commonly used binders in Li-S battery cathodes are inert and have no significant effect on the challenges of sulfur as a cathode material, such as the polysulfide shuttle effect, low ionic/electronic conductivity, and a sluggish redox reaction. In this work, we demonstrate the use of poly(vinylferrocene) (PvFc) as a binder additive that can effectively increase the ionic conductivity of the cathode and act as a sulfide confining agent. Electrochemical tests performed with PvFc as part of the binder mixture used to cast the cathodes demonstrate an increase in rate capability and cycle life when compared to the baseline samples. Ionic conductivity measurements and X-ray photoelectron spectroscopy suggest that the π-cation molecular interaction between the cyclopentadienyl rings from ferrocene and Li + act like an ion couple with ferrocene acting as a static, covalently bound acceptor of Li + ions that enhances their mobility through the cathode. This coupled with the affinity between the ferrocenyl cations and the Li salt anions, which provides more distribution of counterions for Li + movement and improves accessibility to the cathode S reservoir, make PvFc a promising ionomer for Li-S batteries. In addition, the π-cation bonds between cyclopentadienyl and lithium polysulfides produce a sulfide confining effect that mitigates capacity fade through polysulfide dissolution. Furthermore, this work demonstrates an expansion in the utility of PvFc as a component in Li-ion batteries, which so far is mostly limited to use as an active material in organometallic batteries.

25 ENERGY STORAGE↗
DOE OSTI2019

Contra-thermodynamic Olefin Isomerization by Chain-Walking Hydrofunctionalization and Formal Retro-hydrofunctionalization

Here, we report a contra-thermodynamic isomerization of internal olefins to terminal olefins driven by redox reactions and formation of Si–F bonds. This process involves chain-walking hydrosilylation of internal olefins and subsequent formal retro-hydrosilylation. The process rests upon the high activities of platinum hydrosilylation catalysts for isomerization of metal alkyl intermediates and a new, metal-free process for the conversion of alkylsilanes to alkenes. By this approach, 1,2-disubstituted and trisubstituted olefins are converted to terminal olefins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Rh → Sb Interactions Supported by Tris(8-quinolyl)antimony Ligands

The study of ambiphilic systems combining L-type and Z-type ligands within the same construct has emerged as a field of active investigation, especially in the cases of ligands containing a group 13 element as a σ-acceptor for transition metals. (1) Parallel to these developments, several groups have investigated more atypical systems in which the Z-type ligand is a group 15 element. (2) Our contributions to this area have focused on the use of phosphinostibine ligands for the generation of transition metal complexes in which the antimony moiety acts as a Z-type ligand. (1d,3) We have shown that the magnitude of the resulting M → Sb interaction can be readily modulated by the oxidation state of the antimony atom (4) as well as its charge which can be manipulated by abstraction of anionic ligands. (5) Our work has also shown that these effects can be leveraged to enhance the catalytic properties of the transition metal center. (4,5) Some of the simplest systems that we have investigated are those resulting from the reaction of platinum dichloride with the bis- or tris-phosphinostibines ClSb(o-dppp) 2 and Sb(o-dppp) 3 , respectively (o-dppp = o-(Ph 2 P)C 6 H 4 ). These reactions proceed by oxidative insertion of the stibine into a Pt- Cl bond to produce complexes A and B, (6) respectively (Chart 1). Reasoning that the properties of these complexes may also be influenced by the nature of the L-type buttresses, we have now questioned whether stibines featuring nitrogen donor ligands could also display the redox noninnocence of their phosphine counterparts and support the formation of such complexes. Following up on some of our work with ambiphilic tellurium-quinoline ligands, (7) we now report on the reaction of tris-(8-quinolyl)stibines (8) toward (MeCN) 3 RhCl 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Semiconducting Zn x Mo 3 S 13 -GO Chalcocarbogel: A High-Capacity and Stable Sulfur-Equivalent Conversion-Based Electrode for Lithium-Ion Batteries

Lithium–sulfur batteries with a sulfur electrode offer a theoretical capacity of ∼1672 mAh g –1 , but rapid capacity loss mainly constrains their practical application. This work introduces a semiconducting and amorphous Zn x Mo 3 S 13 -GO (x = 0.5) chalcocarbogel sulfur-equivalent electrode with superior capacity and stability for lithium-ion batteries (LIBs). The Zn x Mo 3 S 13 -GO is synthesized in solution under ambient conditions, and its local structure contains S–S, M-Q (M = Mo, Zn; Q = S, O), C–S, and Mo–Mo bonding motifs with Mo coordination environment closely related to Mo 3 S 13 anions, as determined by X-ray photoelectron spectroscopy, synchrotron X-ray scattering, X-ray absorption spectroscopy, and ab initio molecular dynamics simulations. The Li/Zn x Mo 3 S 13 -GO cell offers an initial discharge capacity of 1019 mAh g –1 at a rate of C/3. After the activation cycles, the Li/Zn x Mo 3 S 13 -GO cell demonstrates good cycling stability, retaining a discharge capacity of 519.4 mAh g –1 after 250 cycles with ∼99.98% Coulombic efficiency and excellent rate capabilities. Moreover, it provides an initial discharge capacity of ∼574 mAh g –1 and maintains a retention capacity of 279 mAh g –1 at 1C after 625 cycles. The Lewis acidic Zn 2+ ion enhances the Lewis basic polysulfide anchoring ability and reduces the dissolution of polysulfides produced during the redox process through Zn–S covalent interaction, while the semiconducting and amorphous structure of the chalcocarbogel increases the electrical and ionic conductivity. Furthermore, this work highlights chalcocarbogels’ potential for developing high-capacity and stable electrodes for LIBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Potential-induced wetting and dewetting in pH-responsive block copolymer membranes for mass transport control

Wetting and dewetting behavior in channel-confined hydrophobic volumes is used in biological membranes to effect selective ion/molecular transport. Artificial biomimetic hydrophobic nanopores have been devised utilizing wetting and dewetting, however, tunable mass transport control utilizing multiple transport modes is required for applications such as controllable release/transport, water separation/purification and energy conversion. Here, we investigate the potential-induced wetting and dewetting behavior in a pH-responsive membrane composed of a polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) block copolymer (BCP) when fabricated as a hierarchically-organized sandwich structure on a nanopore electrode array (NEA), i.e. BCP@NEA. At pH < pK a (P4VP) (pK a ~ 4.8), the BCP acts as an anion-exchange membrane due to the hydrophilic, protonated P4VP cylindrical nanodomains, but at pH > pK a (P4VP), the P4VP domains exhibit charge-neutral, hydrophobic and collapsed structures, blocking mass transport via the hydrophobic membrane. However, when originally prepared in a dewetted condition, mass transport in the BCP membrane may be switched on if sufficiently negative potentials are applied to the BCP@NEA architecture. When the hydrophobic BCP membrane is introduced on top of 2-electrode-embedded nanopore arrays, electrolyte solution in the nanopores is introduced, then isolated, by exploiting the potential-induced wetting and dewetting transitions in the BCP membrane. The potential-induced wetting/dewetting transition and the effect on cyclic voltammetry in the BCP@NEA structures is characterized as a function of the potential, pH and ionic strength. Additionally chronoamperometry and redox cycling experiments are used to further characterize the potential response. The multi-modal mass transport system proposed in this work will be useful for ultrasensitive sensing and single-molecule studies, which require long-time monitoring to explore reaction dynamics as well as molecular heterogeneity in nanoconfined volumes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unveiling the Multielectron Acceptor Properties of π-Expanded Pyracylene: Reversible Boat to Chair Conversion

In this work, the chemical reduction of a hybrid pyracylene-hexa-peri-hexabenzocoronene (HPH) nanographene was investigated with different alkali metals (Na, K, Rb) to reveal its remarkable multielectron acceptor abilities. The UV–vis and 1 H NMR spectroscopy monitoring of the stepwise reduction reactions supports the existence of all intermediate reduction states up to the hexaanion for HPH. Tuning the experimental conditions enabled the synthesis of the HPH anions with gradually increasing reduction states (up to –5) isolated with different alkali metal ions as crystalline materials. The single-crystal X-ray diffraction structure analysis demonstrates that the highly negatively charged HPH anions (–4 and –5) exhibit a drastic geometry change from boat-shaped (observed in the neutral parent, mono- and dianions) to a chair conformation, which was proved to be fully reversible by NMR spectroscopy. DFT calculations show that this geometry change is induced by an enhanced interaction between the coordinated metal ions and negatively charged HPH core in the chair conformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Understanding the Stabilization and Tunability of Divalent Europium 2.2.2B Cryptates

Lanthanides such as europium with more accessible divalent states are useful for studying redox stability afforded by macrocyclic organic ligands. Substituted cryptands, such as 2.2.2B cryptand, that increase the oxidative stability of divalent europium also provide coordination environments that support synthetic alterations of Eu(II) cryptate complexes. Two single crystal structures were obtained containing nine-coordinate Eu(II) 2.2.2B cryptate complexes that differ by a single coordination site, the occupation of which is dictated by changes in reaction conditions. A crystal structure containing a [Eu(2.2.2B)Cl] + complex is obtained from a methanol–THF solvent mixture, while a methanol–acetonitrile solvent mixture affords a [Eu(2.2.2B)(CH 3 OH)] 2+ complex. While both crystals exhibit the typical blue emission observed in most Eu(II) containing compounds as a result of 4f 6 5d 1 to 4f 7 transitions, computational results show that the substitution of a Cl– anion in the place of a methanol molecule causes mixing of the 5d excited states in the Eu(II) 2.2.2B cryptate complex. Additionally, magnetism studies reveal the identity of the capping ligand in the Eu(II) 2.2.2B cryptate complex may also lead to exchange between Eu(II) metal centers facilitated by π-stacking interactions within the structure, slightly altering the anticipated magnetic moment. Finally, the synthetic control present in these systems makes them interesting candidates for studying less stable divalent lanthanides and the effects of precise modifications of the electronic structures of low valent lanthanide elements.

Anions↗
DOE OSTI2020

In-field bioreactors demonstrate dynamic shifts in microbial communities in response to geochemical perturbations

Subsurface microbial communities mediate the transformation and fate of redox sensitive materials including organic matter, metals and radionuclides. Few studies have explored how changing geochemical conditions influence the composition of groundwater microbial communities over time. We temporally monitored alterations in abiotic forces on microbial community structure using 1L in-field bioreactors receiving background and contaminated groundwater at the Oak Ridge Reservation, TN. Planktonic and biofilm microbial communities were initialized with background water for 4 days to establish communities in triplicate control reactors and triplicate test reactors and then fed filtered water for 14 days. On day 18, three reactors were switched to receive filtered groundwater from a contaminated well, enriched in total dissolved solids relative to the background site, particularly chloride, nitrate, uranium, and sulfate. Biological and geochemical data were collected throughout the experiment, including planktonic and biofilm DNA for 16S rRNA amplicon sequencing, cell counts, total protein, anions, cations, trace metals, organic acids, bicarbonate, pH, Eh, DO, and conductivity. We observed significant shifts in both planktonic and biofilm microbial communities receiving contaminated water. This included a loss of rare taxa, especially amongst members of the Bacteroidetes, Acidobacteria, Chloroflexi, and Betaproteobacteria, but enrichment in the Fe- and nitrate- reducing Ferribacterium and parasitic Bdellovibrio. These shifted communities were more similar to the contaminated well community, suggesting that geochemical forces substantially influence microbial community diversity and structure. These influences can only be captured through such comprehensive temporal studies, which also enable more robust and accurate predictive models to be developed.

59 BASIC BIOLOGICAL SCIENCES↗