SEARCH · Search NASA

Results for “Atmosphere.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS2015

Ocean-Atmosphere Coupled Model Simulations of Precipitation in the Central Andes

The meridional extent and complex orography of the South American continent contributes to a wide diversity of climate regimes ranging from hyper-arid deserts to tropical rainforests to sub-polar highland regions. In addition, South American meteorology and climate are also made further complicated by ENSO, a powerful coupled ocean-atmosphere phenomenon. Modelling studies in this region have typically resorted to either atmospheric mesoscale or atmosphere-ocean coupled global climate models. The latter offers full physics and high spatial resolution, but it is computationally inefficient typically lack an interactive ocean, whereas the former offers high computational efficiency and ocean-atmosphere coupling, but it lacks adequate spatial and temporal resolution to adequate resolve the complex orography and explicitly simulate precipitation. Explicit simulation of precipitation is vital in the Central Andes where rainfall rates are light (0.5-5 mm hr-1), there is strong seasonality, and most precipitation is associated with weak mesoscale-organized convection. Recent increases in both computational power and model development have led to the advent of coupled ocean-atmosphere mesoscale models for both weather and climate study applications. These modelling systems, while computationally expensive, include two-way ocean-atmosphere coupling, high resolution, and explicit simulation of precipitation. In this study, we use the Coupled Ocean-Atmosphere-Wave-Sediment Transport (COAWST), a fully-coupled mesoscale atmosphere-ocean modeling system. Previous work has shown COAWST to reasonably simulate the entire 2003-2004 wet season (Dec-Feb) as validated against both satellite and model analysis data when ECMWF interim analysis data were used for boundary conditions on a 27-9-km grid configuration (Outer grid extent: 60.4S to 17.7N and 118.6W to 17.4W).

Regional Climate Model↗

NASA NTRS2016

Atmospheric Correction for Satellite Ocean Color Radiometry

This tutorial is an introduction to atmospheric correction in general and also documentation of the atmospheric correction algorithms currently implemented by the NASA Ocean Biology Processing Group (OBPG) for processing ocean color data from satellite-borne sensors such as MODIS and VIIRS. The intended audience is graduate students or others who are encountering this topic for the first time. The tutorial is in two parts. Part I discusses the generic atmospheric correction problem. The magnitude and nature of the problem are first illustrated with numerical results generated by a coupled ocean-atmosphere radiative transfer model. That code allow the various contributions (Rayleigh and aerosol path radiance, surface reflectance, water-leaving radiance, etc.) to the topof- the-atmosphere (TOA) radiance to be separated out. Particular attention is then paid to the definition, calculation, and interpretation of the so-called "exact normalized water-leaving radiance" and its equivalent reflectance. Part I ends with chapters on the calculation of direct and diffuse atmospheric transmittances, and on how vicarious calibration is performed. Part II then describes one by one the particular algorithms currently used by the OBPG to effect the various steps of the atmospheric correction process, viz. the corrections for absorption and scattering by gases and aerosols, Sun and sky reflectance by the sea surface and whitecaps, and finally corrections for sensor out-of-band response and polarization effects. One goal of the tutorial-guided by teaching needs- is to distill the results of dozens of papers published over several decades of research in atmospheric correction for ocean color remote sensing.

MODIS↗

NASA NTRS2016

B33C-0612: Evaluation of Simulated Biospheric Carbon Dioxide Fluxes and Atmospheric Concentrations Using Global in Situ Observations

Atmospheric mixing ratios of carbon dioxide (CO2) are largely controlled by anthropogenic emission sources and biospheric sources/sinks. Global biospheric fluxes of CO2 are controlled by complex processes facilitating the exchange of carbon between terrestrial ecosystems and the atmosphere. These processes which play a key role in these terrestrial ecosystem-atmosphere carbon exchanges are currently not fully understood, resulting in large uncertainties in the quantification of biospheric CO2 fluxes. Current models with these inherent deficiencies have difficulties simulating the global carbon cycle with high accuracy. We are developing a new modeling platform, GEOS-Chem-CASA by integrating the year-specific NASA-CASA (National Aeronautics and Space Administration - Carnegie Ames Stanford Approach) biosphere model with the GEOS-Chem (Goddard Earth Observation System-Chemistry) chemical transport model to improve the simulation of atmosphere-terrestrial ecosystem carbon exchange. We use NASA-CASA to explicitly represent the exchange of CO2 between terrestrial ecosystem and atmosphere by replacing the baseline GEOS-Chem land net CO2 flux and forest biomass burning CO2 emissions. We will present the estimation and evaluation of these "bottom-up" land CO2 fluxes, simulated atmospheric mixing ratios, and forest disturbance changes over the last decade. In addition, we will present our initial comparison of atmospheric column-mean dry air mole fraction of CO2 predicted by the model and those retrieved from NASA's OCO-2 (Orbiting Carbon Observatory-2) satellite instrument and model-predicted surface CO2 mixing ratios with global in situ observations. This evaluation is the first step necessary for our future work planned to constrain the estimates of biospheric carbon fluxes through "top-down" inverse modeling, which will improve our understanding of the processes controlling atmosphere-terrestrial ecosystem greenhouse gas exchanges, especially over regions which lack in situ observations.

in situ observations↗

NASA NTRS2017

Sonora: A New Generation Model Atmosphere Grid for Brown Dwarfs and Young Extrasolar Giant Planets

Brown dwarf and giant planet atmospheric structure and composition has been studied both by forward models and, increasingly so, by retrieval methods. While indisputably informative, retrieval methods are of greatest value when judged in the context of grid model predictions. Meanwhile retrieval models can test the assumptions inherent in the forward modeling procedure. In order to provide a new, systematic survey of brown dwarf atmospheric structure, emergent spectra, and evolution, we have constructed a new grid of brown dwarf model atmospheres. We ultimately aim for our grid to span substantial ranges of atmospheric metallilcity, C/O ratios, cloud properties, atmospheric mixing, and other parameters. Spectra predicted by our modeling grid can be compared to both observations and retrieval results to aid in the interpretation and planning of future telescopic observations. We thus present Sonora, a new generation of substellar atmosphere models, appropriate for application to studies of L, T, and Y-type brown dwarfs and young extrasolar giant planets. The models describe the expected temperature-pressure profile and emergent spectra of an atmosphere in radiative-convective equilibrium for ranges of effective temperatures and gravities encompassing 200 less than or equal to T(sub eff) less than or equal to 2400 K and 2.5 less than or equal to log g less than or equal to 5.5. In our poster we briefly describe our modeling methodology, enumerate various updates since our group's previous models, and present our initial tranche of models for cloudless, solar metallicity, and solar carbon-to-oxygen ratio, chemical equilibrium atmospheres. These models will be available online and will be updated as opacities and cloud modeling methods continue to improve.

emergent spectra↗

NASA NTRS2018

Photochemical Haze Formation in the Atmospheres of Super-Earths and Mini-Neptunes

UV (ultraviolet) radiation can induce photochemical processes in the atmospheres of exoplanet and produce haze particles. Recent transmission spectra of super-Earths and mini-Neptunes have demonstrated the possibility that exoplanets have haze/cloud layers at high altitudes in their atmospheres. Haze particles play an important role in planetary atmospheres because they affect the chemistry, dynamics, and radiation flux in planetary atmospheres, and may provide a source of organic material to the surface which may impact the origin or evolution of life. However, very little information is known about photochemical processes in cool, high-metallicity exoplanetary atmospheres. We present here photochemical haze formation in laboratory simulation experiments with UV radiation; we explored temperatures ranging from 300 to 600 degrees Kelvin and a range of atmospheric metallicities (100 times, 1000 times, and 10000 times solar metallicity). We find that photochemical hazes are generated in all simulated atmospheres, but the haze production rates appear to be temperature dependent: the particles produced in each metallicity group decrease as the temperature increases. The images taken with an atomic force microscope (AFM) show that the particle size (15 nanometers to 190 nanometers) varies with temperature and metallicity. Our results provide useful laboratory data on the photochemical haze formation and particle properties, which can serve as critical inputs for exoplanet atmosphere modeling, and guide future observations of exoplanets with the Transiting Exoplanet Survey Satellite (TESS), the James Webb Space Telescope (JWST), and the Wide-Field Infrared Survey Telescope (WFIRST).

He, Chao↗

NASA NTRS2017

Atmospheric Instrument Systems and Technology in the Goddard Earth Sciences Division

Studies of the Earth’s atmosphere require a comprehensive set of observations that rely on instruments flown on spacecraft, aircraft, and balloons as well as those deployed on the surface. Within NASA’s Goddard Space Flight Center (GSFC) Earth Sciences Division-Atmospheres, laboratories and offices maintain an active program of instrument system development and observational studies that provide: 1) information leading to a basic understanding of atmospheric processes and their relationships with the Earth’s climate system, 2) prototypes for future flight instruments, 3) instruments to serve as calibration references for satellite missions, and 4) instruments for future field validation campaigns that support ongoing space missions. Our scientists participate in all aspects of instrument activity, including component and system design, calibration techniques, retrieval algorithm development, and data processing systems. The Atmospheres Program has well-equipped labs and test equipment to support the development and testing of instrument systems, such as a radiometric calibration and development facility to support the calibration of ultraviolet and visible (UV/VIS), space-borne solar backscatter instruments. This document summarizes the features and characteristics of 46 instrument systems that currently exist or are under development. The report is organized according to active, passive, or in situ remote sensing across the electromagnetic spectrum. Most of the systems are considered operational in that they have demonstrated performance in the field and are capable of being deployed on relatively short notice. Other systems are under study or of low technical readiness level (TRL). The systems described herein are designed mainly for surface or airborne platforms. However, two Cubesat systems also have been developed through collaborative efforts. The Solar Disk Sextant (SDS) is the single balloon-borne instrument. The lidar systems described herein are designed to retrieve clouds, aerosols, methane, water vapor pressure, temperature, and winds. Most of the lasers operate at some wavelength combination of 355, 532, and 1064 nm. The various systems provide high sensitivity measurements based on returns from backscatter or Raman scattering including intensity and polarization. Measurements of the frequency (Doppler) shift of light scattered from various atmospheric constitutes can also be made. Microwave sensors consist of both active (radar) and passive (radiometer) systems. These systems are important for studying processes involving water in various forms. The dielectric properties of water affect microwave brightness temperatures, which are used to retrieve atmospheric parameters such as rainfall rate and other key elements of the hydrological cycle. Atmosphere radar systems operate in the range from 9.6 GHz to 94 GHz and have measurement accuracies from -5 to 1 dBZ; radiometers operate in the 50 GHz to 874 GHz range with accuracies from 0.5 to 1 degree K; conical and cross-track scan modes are used. Our passive optical sensors, consisting of radiometers and spectrometers, collectively operate from the UV into the infrared. These systems measure energy fluxes and atmospheric parameters such as trace gases, aerosols, cloud properties, or altitude profiles of various species. Imager spatial resolution varies from 37 m to 400 m depending on altitude; spectral resolution is as small as 0.5 nm. Many of the airborne systems have been developed to fly on multiple aircraft.

Platnick, Steven E.↗

NASA NTRS2019

Earth's Early Reduced Atmospheres

Earth’s early atmosphere evolved in response to cosmic impacts, photochemistry generated by the copious extreme ultraviolet radiation emitted by the young Sun, hydrogen escape, mineral redox buffering, the evolution of iron in the mantle, and the character of crustal weathering and subduction. No single chemical composition, surface pressure, or temperature was typical. After the biggest impacts the temperature likely rose above 3000 K and the atmosphere held rock vapor. As the atmosphere cooled its constituents rained out: first the silicates, then the geochemical volatiles (such as salt), and last the water. Depending on the size of the impact, cooling took thousands to millions of years. Between impacts the atmosphere was thick with gases like CO2, H2, and CH4 that do not condense at Earth but provide greenhouse warming that could easily have maintained surface temperatures in excess of 500 K. At some point the early atmosphere must have been conducive to the evolution of organic chemistry and the origin of life. It was therefore --- at times --- dominated by reduced gases like hydrogen and methane. Hydrogen-methane atmospheres are easily formed thermochemically after major impacts if H2O and CO2 were present on Earth in quantities consistent with their inventories on Earth today – the key is high pressure. Hydrogen-methane atmospheres slowly break down over millions of years by hydrogen escape and photochemistry. At first methane decomposes into tars and nitriles that precipitate, but later as the atmosphere grows more oxidized from hydrogen escape the methane oxidizes to CO and CO2, with a small fraction going to HCN. Impacts can also produce NH3 directly from N2 and H2O, which is expected to rain out with the H2O. As impacts grew infrequent the climate cooled in response to the fixing of CO2 as carbonate and carbonate subduction. Eventually the CO2 was mostly removed to the mantle and the surface mostly frozen.

Zahnle, Kevin↗

NASA NTRS2003

Laboratory for Atmospheres 2002 Technical Highlights

How can we improve our ability to predict the weather-tomorrow, next week, and into the future? How is the Earth's climate changing? What causes such change? And what are its costs? What can the atmospheres of distant planets teach us about our own planet and its evolution? The Laboratory for Atmospheres is helping to answer these and other scientific questions about our planet and its neighbors. The Laboratory conducts a broad theoretical and experimental research program studying all aspects of the atmospheres of the Earth and other planets, including their structural, dynamical, radiative, and chemical properties, with the overarching goal to provide better understanding and to improve prediction of the Earth's climate. Vigorous research is central to NASA's exploration of the frontiers of knowledge. NASA scientists play a key role in conceiving new space missions, providing mission requirements, and carrying out research to explore the behavior of planetary systems, including, notably, the Earth's. Our Laboratory's scientists also supply outside scientists with technical assistance and scientific data to further investigations not immediately addressed by NASA itself. Laboratory scientists submit competitive research proposals with diverse scientific or technological approaches to NASA and other Federal agencies to acquire research support. The Laboratory management strives to provide a working environment that promotes creativity, competition, and openness. The Laboratory for Atmospheres is a vital participant in NASA's research program. Our Laboratory often has relatively large programs, sizable satellite missions, or observational campaigns that require the cooperative and collaborative efforts of many scientists. We ensure an appropriate balance between our scientists' responsibility for these large collaborative projects and their need for an active individual research agenda. This balance allows members of the Laboratory to continuously improve their scientific credentials. The Laboratory places high importance on promoting and measuring quality in its scientific research. We strive to assure high quality through peer-review funding processes that support approximately 90% of the work in the Laboratory. The overall quality of our scientific efforts is evaluated periodically by committees of advisors from the external scientific community, as detailed in Appendix 2 of this document. Members of the Laboratory interact with the general public to support a wide range of interests in the atmospheric sciences. Among other activities, the Laboratory raises the public's awareness of atmospheric science by presenting public lectures and demonstrations, by making scientific data available to wide audiences, by teaching, and by mentoring students and teachers. Section 6 presents details of the Laboratory's outreach activities during 2002. The Laboratory is also committed to addressing the demographic imbalances that exist today in the atmospheric and space sciences. We must address these imbalances for our field to enjoy the full benefit of all of the Nation's talent. The Laboratory makes substantial efforts to attract new scientists to the fields of atmospheric and space sciences. We strongly encourage the establishment of partnerships with Federal and state agencies that have operational responsibilities to promote the societal application of Earth sciences.

Steven E. Platnick↗

NASA NTRS2020

Investigation of Atmospheric Boundary-Layer Effects on Launch-Vehicle Ground Wind Loads

A launch vehicle ground-wind-loads program is underway at the NASA Langley Transonic Dynamics Tunnel. The objectives are to quantify key aerodynamic and structural characteristics that impact the occurrence of large wind-induced oscillations of a launch vehicle when exposed to ground winds prior to launch. Of particular interest is the dynamic response of a launch vehicle when a von Kármán vortex street forms in the wake of the vehicle resulting in quasiperiodic lift and drag forces. Vehicle response to these quasiperiodic forces can become quite large when the frequency of vortex shedding nears that of a lowly-damped structural mode thereby exciting a resonant response. Wind approaching the vehicle can be characterized by a varying speed with height and turbulence content. The combination of both the varying speed and turbulence content is referred to herein as the atmospheric boundary-layer. The importance of the atmospheric boundary-layer upon launch vehicle wind-induced oscillation response has long been questioned, and its effects are not well understood. Although there are several facilities around the world dedicated to replicating atmospheric boundary layers, the development of such a boundary layer in a wind tunnel capable of producing flight-representative Reynolds numbers for aeroelastically-scaled launch vehicle models has only recently been accomplished. The NASA Langley Transonic Dynamics Tunnel is capable of simulating flight-representative Reynolds numbers of launch vehicles on the pad and is uniquely capable of replicating many fluid-structure scaling parameters typical of aeroelastic tests. Recent test efforts successfully developed representative atmospheric boundary-layers for three launch sites in the Transonic Dynamics Tunnel, thereby allowing all known aerodynamic and fluid-structure coupling parameters to be simultaneously simulated for those sites. Dynamic aeroelastically-scaled models representative of typical large launch vehicles were constructed for testing. Aeroelastic scaling includes matching geometry, mode shapes, reduced frequencies, damping, running mass ratios, and running stiffness ratios. The models were tested in smooth uniform flow and then immersed in the atmospheric boundary-layer for comparison of these effects. Dynamic data were acquired measuring unsteady pressure, acceleration, and base bending moment. It was discovered that peak dynamic loads resulting from resonant wind-induced oscillation response are similar when acquired in either smooth uniform flow or an atmospheric boundary-layer. This indicates that resonant lock-in events are minimally impacted by representative turbulence and/or wind profile. Alternately, nonresonant wind-induced oscillation response events are stronger when acquired in an atmospheric boundary-layer. This indicates that a lowly-damped structural response will increase when exposed to an increased magnitude of random excitation, which is consistent with historical comparisons. Loads created by the resonant response events were substantially stronger than those from the nonresonant response events. Therefore, if testing is done to simply identify worst-case conditions and load magnitude, then smooth uniform flow is likely an adequate test technique. However, if nonresonant response loads are of primary interest, then atmospheric boundary-layer simulation is required.

Thomas G Ivanco↗

NASA NTRSDate not supplied

The Search for New Molecular Species in the Atmosphere of Titan

The atmosphere of Saturn’s moon, Titan, contains a vast array of minor molecular constituents originating from the dissociation of its primary compounds, N2and CH4. The extent of Titan’s photochemical network was revealed by ionospheric measurements from the Cassini orbiter, leaving substantial gaps in the corresponding neutral inventory typically probed through infrared spectroscopy. Utilizing the unprecedented sensitivity and high spectral resolution of the Atacama Large Millimeter/submillimeter Array (ALMA) at longer wavelengths, we searched for additional trace gases in Titan’s atmosphere during 2016, 2017,and 2019to further characterize Titan’s atmospheric and surface composition. These observations have resulted in the spectroscopic detections of the small cyclic molecule, cyclopropenylidene (c-C3H2), and the largest nitrile to date, methyl cyanoacetylene (CH3C3N), for the first time in Titan’s atmosphere –or anywhere else in the Solar System. We employed radiative transfer models to determine the volume mixing ratio of both species in Titan’s middle and upper atmosphere (altitudes > 350 km)and constrained the total column densities for the incorporation into future photochemical models of Titan’s atmosphere. Discrepancies between these results and current models necessitates the need for dedicated laboratory and modeling studies regarding the production pathways for trace complex organics in Titan’s atmosphere. Additionally, the measurement of previously undetected molecular species provides further incentive for the study of planetary atmospheres in the (sub)millimeter regime with facilities such as ALMA.

A E Thelen↗

NASA NTRS2021

L 98-59: A Benchmark System of Small Planets for Future Atmospheric Characterization

The M3V dwarf star L 98-59 hosts three small (R < 1.6 Rꚛ) planets. The host star is bright (K = 7.1) and nearby (10.6 pc), making the system a prime target for follow-up characterization with the Hubble Space Telescope (HST) and the upcoming James Webb Space Telescope (JWST). Herein, we use simulated transmission spectroscopy to evaluate the detectability of spectral features with HST and JWST assuming diverse atmospheric scenarios (e.g., atmospheres dominated by H2, H2O, CO2, or O2). We find that H2O and CH4 present in a low mean molecular weight atmosphere could be detected with HST in one transit for the two outermost planets, while H2O in a clear steam atmosphere could be detected in six transits or fewer with HST for all three planets. We predict that observations using JWST/NIRISS would be capable of detecting a clear steam atmosphere in one transit for each planet and H2O absorption in a hazy steam atmosphere in two transits or less. In a clear, desiccated atmosphere, O2 absorption may be detectable for all three planets with NIRISS. If the L 98-59 planets possess a clear, Venus-like atmosphere, NIRSpec could detect CO2 within 26 transits for each planet, but the presence of H2SO4 clouds would significantly suppress CO2 absorption. The L 98-59 system is an excellent laboratory for comparative planetary studies of transiting multiplanet systems, and observations of the system via HST and JWST would present a unique opportunity to test the accuracy of the models presented in this study.

Daria Pidhorodetska↗

NASA NTRS2022

The TRAPPIST-1 Habitable Atmosphere Intercomparison (THAI). I. Dry Cases—The Fellowship of the GCMs

With the commissioning of powerful, new-generation telescopes such as the James Webb Space Telescope (JWST) and the ground-based Extremely Large Telescopes, the first characterization of a high molecular weight atmosphere around a temperate rocky exoplanet is imminent. Atmospheric simulations and synthetic observables of target exoplanets are essential to prepare and interpret these observations. Here we report the results of the first part of the TRAPPIST-1 Habitable Atmosphere Intercomparison (THAI) project, which compares 3D numerical simulations performed with four state-of-the-art global climate models (ExoCAM, LMD-Generic, ROCKE-3D, Unified Model) for the potentially habitable target TRAPPIST-1e. In this first part, we present the results of dry atmospheric simulations. These simulations serve as a benchmark to test how radiative transfer, subgrid-scale mixing (dry turbulence and convection), and large-scale dynamics impact the climate of TRAPPIST-1e and consequently the transit spectroscopy signature as seen by JWST. To first order, the four models give results in good agreement. The intermodel spread in the global mean surface temperature amounts to 7 K (6 K) for the N2-dominated (CO2-dominated) atmosphere. The radiative fluxes are also remarkably similar (intermodel variations less than 5%), from the surface (1 bar) up to atmospheric pressures ∼5 mbar. Moderate differences between the models appear in the atmospheric circulation pattern (winds) and the (stratospheric) thermal structure. These differences arise between the models from (1) large-scale dynamics, because TRAPPIST-1e lies at the tipping point between two different circulation regimes (fast and Rhines rotators) in which the models can be alternatively trapped, and (2) parameterizations used in the upper atmosphere such as numerical damping.

Martin Turbet↗

NASA NTRSDate not supplied

Simulating the Martian Middle and Upper Atmosphere with the NASA Ames Mars GCM.

The NASA Ames Mars Global Climate Model (MGCM) continues to be utilized to examine the dynamical coupling between the lower atmosphere and middle/upper atmosphere. This coupling impacts the transport of water, dust, and chemistry which augments the thermal structure and circulation. The interactions and coupling within the atmosphere are important for understanding the present-day and past atmosphere and climate. MGCM simulations are compared with observations from recent Mars missions to provide model constraints, and in turn, the simulations can then provide context to the observations. This cycle is important to move us forward in our understanding of planetary atmospheres. We will present on one of the fundamental atmospheric features, the thermal structure, and how the physics in the MGCM can elucidate the observed diurnal and seasonal behavior. Additionally, we will focus on the distribution of chemical species which influences the thermal structure and provides additional information on the coupling between the lower and middle/upper atmosphere. Lastly, we will provide a summary of the model capabilities, as the MGCM continues to be improved upon to properly simulate Mars’ atmosphere from the ground to ~250 km.

Amanda Susanne Brecht↗

NASA NTRSDate not supplied

Argon Isotopic Constraints on Planetary Degassing and the Evolution of Earth's Atmosphere: Insights from K-bearing Phases

An enduring question in planetary science is the nature of volatile degassing from rocky planets during their evolution. The reactive nature of planetary volatiles (e.g. H2O, CO2, N, H) make them difficult to directly track through time. Noble gases, like argon, can act as passive tracers of planetary processes, with isotopic ratios providing clues on planetary volatile inventories and fluxes. Previous studies [e.g. 1, 2] use Earth’s argon degassing history to constrain the growth of continental crust. However, that record is limited to the modern 40Ar/36Ar ratio of 298.56 [3] and three time slices recorded in hydrothermal quartz of the Archean Dresser formation [1]: from ~143 (3.5 Ga) to ~212 (2.7 Ga). Due to the paucity of data, partly a result of using nominally K-free minerals, the temporal evolution of atmospheric 40Ar/36Ar remains poorly constrained. K-bearing phases from igneous rocks, forming at high temperature and upper mantle or crustal conditions, are rarely considered viable for recording ancient atmospheric 40Ar/36Ar values. We show that this possible and a potential path to more precise records of ancient atmosphere by leveraging the radiogenic endmember of isotope correlation diagrams. An isochron of coeval biotite grains from the Bushveld Complex [4], with little indication of alteration or excess 40Ar, yield an initial 40Ar/36Ar value that matches the atmospheric 40Ar/36Ar value of ~228 at 2055 Ma in the model of [2]. In addition, new multi-mineral data from the Palisade Sill also match the modelled 40Ar/36Ar value of ~293 at 202 Ma, providing another tie point in the late Triassic. Combined, the Bushveld and Palisades samples provide two new constraints on the ancient atmosphere and help define the history of planetary degassing. These results demonstrate the possibility of accurately and precisely obtaining atmospheric information from igneous rocks, not exclusively K-free phases, thus providing a surplus of ways to reconstruct planetary atmospheres and processes. A robust atmospheric 40Ar/36Ar history also has practical uses and we explore the systematic offsets that arise from using a modern 40Ar/36Ar value in 40Ar/39Ar age calculations of old samples.

J. B. Setera↗

NASA NTRSDate not supplied

Advancing Open Science in Atmospheric Research: Integrating Data Usability and Machine Learning

In the dynamic realm of atmospheric sciences, the convergence of data science methodologies and open data marks a transformative era, driving research advancements and nurturing aspiring scientists. This abstract highlights two pivotal projects that epitomize open science principles, aligning seamlessly with the session's objective of interdisciplinary synergy and the cultivation of emerging talent. As a NASA-certified data center, our foremost endeavor focuses on enhancing the visibility and traceability of NASA datasets within atmospheric science research. This initiative not only elevates these datasets' prominence but also establishes a robust framework ensuring their credibility in scholarly discourse. By bridging the gap between data sources and research publications, this project serves as an educational catalyst, nurturing a new generation of scholars in open collaboration and dataset authenticity. Concurrently, our second project pioneers an early warning system for flooding events, utilizing machine learning algorithms to predict flooded fractions. Through multi-source data fusion and predictive modeling, this initiative goes beyond forecasting; it embodies the core of open science by enabling proactive risk mitigation strategies. This project not only advances atmospheric sciences but also fosters an environment where young scholars engage in practical, data-driven solutions. These intertwined projects exemplify the fusion of data science with open data solutions, ensuring both the usability of quality datasets and the cultivation of scientific knowledge among emerging scholars. By spotlighting these impactful use cases, our aim is to foster discussions emphasizing the importance of open collaboration, data integrity, and the nurturing of scientific talent in atmospheric sciences." "In the dynamic realm of atmospheric sciences, the convergence of data science methodologies and open data marks a transformative era, driving research advancements and nurturing aspiring scientists. This abstract highlights two pivotal projects that epitomize open science principles, aligning seamlessly with the session's objective of interdisciplinary synergy and the cultivation of emerging talent. As a NASA-certified data center, our foremost endeavor focuses on enhancing the visibility and traceability of NASA datasets within atmospheric science research. This initiative not only elevates these datasets' prominence but also establishes a robust framework ensuring their credibility in scholarly discourse. By bridging the gap between data sources and research publications, this project serves as an educational catalyst, nurturing a new generation of scholars in open collaboration and dataset authenticity. Concurrently, our second project pioneers an early warning system for flooding events, utilizing machine learning algorithms to predict flooded fractions. Through multi-source data fusion and predictive modeling, this initiative goes beyond forecasting; it embodies the core of open science by enabling proactive risk mitigation strategies. This project not only advances atmospheric sciences but also fosters an environment where young scholars engage in practical, data-driven solutions. These intertwined projects exemplify the fusion of data science with open data solutions, ensuring both the usability of quality datasets and the cultivation of scientific knowledge among emerging scholars. By spotlighting these impactful use cases, our aim is to foster discussions emphasizing the importance of open collaboration, data integrity, and the nurturing of scientific talent in atmospheric sciences.

Jennifer Wei↗

NASA NTRSDate not supplied

Assessing Huygens Probe Entry, Descent, and Landing at Titan Simulation using Dragonfly Atmosphere Model

Dragonfly is a New Frontiers Program mission that will deliver a rotorcraft to Saturn's moon, Titan. This mission follows Huygens as the previous mission that successfully landed a vehicle on Titan. A flight mechanics simulation of Dragonfly's Entry, Descent, and Landing sequence has been developed using the Program to Optimize Simulated Trajectories II. The simulation incorporates several subsystem models, including aerodynamics, gravity, and mass properties, to fully capture the multi-body six degree of freedom dynamics. Among all the subsystem models that inform the Entry, Descent, and Landing dynamics, the atmosphere model of Titan is a critical component. The atmosphere model characterizes the density, temperature, pressure, and winds that the entry vehicle experiences during the descent. This impacts several aspects of the descent such as the peak heating, aerodynamics, parachute release conditions, the dynamics of the vehicle and parachutes, and the landing ellipse. In the course of developing Dragonfly, an updated model of the Titan atmosphere has been created corresponding to Dragonfly's arrival in the mid-2030s, approximately one Titan year after the Huygens mission successfully landed a probe on Titan. This work leverages previous work done to investigate Huygens EDL sequence to assess the atmosphere model developed for Dragonfly. This is done by utilizing the updated Titan atmosphere model, the Dragonfly atmosphere model, within the Huygens POST2-based flight simulation with the goal of characterizing the differences between the atmospheric models and assessing how the Dragonfly atmosphere model impacts Huygens entry dynamics.

Huygens↗

NASA NTRSDate not supplied

Assessing Huygens Probe Entry, Descent, and Landing at Titan Simulation using Dragonfly Atmosphere Model

Entry Descent Landing↗

NASA NTRS2025

Rolling DICE to Advance Knowledge of Land-Atmosphere Interactions

The Diurnal Land-Atmosphere Coupling Experiment (DICE) aims to explore the complex interactions between the land surface and atmospheric boundary layer, which are generally not well understood and difficult to isolate in models. The project involves over 10 different models, combining expertise from both land surface and atmospheric boundary-layer modelling groups. A simple three-stage methodology is designed to assess land-atmosphere feedbacks. Stage 1: the individual components are assessed in isolation, driven and evaluated against observational data; stage 2: the impact of coupling is investigated; stage 3: the sensitivity of the stand-alone models to variations in driving data is explored. For this initial study, a three-day clear-sky period in the mid-west USA over, an assumed simple, predominantly grass surface was simulated using data from the CASES-99 field campaign. Key conclusions from the study include: (1) the memory of vegetation state within Land Surface Models (LSMs) needs attention; (2) the height of atmospheric forcing for LSMs is important, particularly for the nocturnal boundary layer, and this has implications for both observations and vertical resolution for atmospheric models; (3) land-atmosphere feedbacks reduce errors in simulated surface fluxes at the expense of the accuracy of the variables that the models are designed to simulate (e.g., temperature, humidity and wind speed); (4) problems remain in representing the stable boundary layer in atmospheric models; (5) the mixing of temperature and humidity within the boundary layer may need to be represented separately; (6) differences in daytime profiles of heat, moisture and momentum between models are mainly due to the way the models erode the inversion at the top of the boundary layer, rather than differences in the surface fluxes. Resultant variations in modelled boundary layer heights have a substantial impact on relative humidity and could partially explain variations in coupling strength between models in the GLACE experiment.

Martin Best↗