Search NASA⌕ Search

SEARCH · Search NASA

Results for “CALCINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Investigations of element spatial correlation in Mn-promoted Co-based Fischer–Tropsch synthesis catalysts

Making connections between performance and structure in bimetallic catalysts requires knowledge of how the two elements are spatially associated. Elemental maps obtained by analytical TEM methods are an invaluable tool for identifying the location of different elements, but for many samples, visual inspection of elemental maps is insufficient for assessing the degree of element spatial correlation. This is particularly true for beam-sensitive materials where short mapping acquisition times lead to images with high noise and low color depth. In these situations, statistical analysis of elemental maps can be used to identify spatial correlations among the elements in a sample. In this work, the relationship between catalyst performance and bimetallic spatial association was explored using Mn-promoted Co-based Fischer-Tropsch synthesis catalysts prepared by different pretreatment methods. Mn was used as a catalyst additive to suppress methane formation. Catalysts that underwent calcination before reduction produced more methane and fewer long-chain hydrocarbons than catalysts that were directly reduced. The extent to which Co and Mn were spatially associated was assessed using correlation metrics, colocation plots, and histograms generated using data from STEM-EDS maps. Although both catalysts yielded visually similar elemental maps, the results of statistical analysis suggested that the calcined catalyst exhibited greater spatial segregation between the Co and Mn. These findings support the hypothesis that having Mn in close proximity to the Co is essential for the manifestation of Mn promotion effects in Co-based FTS catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalysts for selective hydrogenation of furfural derived from the double complex salt [Pd(NH 3 ) 4 ](ReO 4 ) 2 on γ-Al 2 O 3

The double complex salt [Pd(NH3)4](ReO4)2 was employed as precursor of supported bimetallic catalysts for selective hydrogenation of furfural. Direct reduction of [Pd(NH3)4](ReO4)2 on γ-Al2O3 in flowing H2 at 400 °C yields bimetallic nanoparticles 1–2 nm in size that exhibit significant interaction between the metals, as evidenced by temperature-programmed hydride decomposition (complete suppression of β-PdHx formation), extended X-ray absorption fine structure spectroscopy at the Pd K and Re LIII edges (PdRe distance = 2.72 Å), and scanning transmission electron microscopy with energy dispersive X-ray analysis. In contrast, calcination of [Pd(NH3)4](ReO4)2 on γ-Al2O3 at 350 °C in air and subsequent reduction in H2 at 400 °C results in metal segregation and formation of large (>50 nm) supported Pd particles; Re species cover the Pd particles and γ-Al2O3 support. A PdRe 1:2 catalyst prepared by sequential impregnation and calcination using HReO4 and [Pd(NH3)4](NO3)2 has a similar morphology. The catalyst derived by direct reduction of [Pd(NH3)4](ReO4)2 on γ-Al2O3 exhibits remarkably high activity for selective hydrogenation of furfural to furfuryl alcohol (FAL) at 150 °C and 1 atm. Suppression of H2 chemisorption via elimination of Pd threefold sites, as evidenced by CO diffuse-reflectance infrared Fourier transform spectroscopy, correlates with increased FAL selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Creating Brønsted acidity at the SiO 2 -Nb 2 O 5 interface

Catalytically active acid sites associated with the silica-niobia interface were probed with a series of overcoated SiO 2 on Nb 2 O 5 (SiO 2 /Nb 2 O 5 ) mixed oxide materials prepared by deposition of tetraethyl orthosilicate onto niobic acid (Nb 2 O 5 nH 2 O) or calcined niobia (Nb 2 O 5 ). NH 3 TPD and pyridine DRIFTS studies indicated that the speciation of acid sites in the materials evolved as a function of SiO 2 loading, impacting the quantity and stability of Brønsted sites. Catalyst activity was highly dependent on SiO 2 loading in the liquid phase hydroalkoxylation of dihydropyran with n-octanol. At SiO 2 surface densities corresponding to approximately 1 Si per 2 surface Nb, the activity of these catalysts passed through a maximum approximately 20 times higher than the activity of calcined Nb 2 O 5 . We found that apparent reaction barriers measured over the most active SiO 2 /Nb 2 O 5 catalysts were 10 kJ/mol lower than those measured over niobic acid, suggesting that the OH features unique to the SiO 2 -Nb 2 O 5 interface were slightly more reactive than those on niobic acid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Densification of non-radioactive porous siliceous particles loaded with cesium potassium copper hexacyanoferrate by spark plasma sintering

In the development of a conditioning process for cesium-bearing sorbents from the decontamination of aqueous waste streams, the treatment of a granular material composed of (Cs,K) 2 CuFe(CN) 6 loaded onto mesoporous silica particles has been investigated in an additive-free two-step conditioning process involving (i) calcination at 1000 °C to remove volatile species and (ii) densification by spark plasma sintering. A 92.0 % dense pellet was obtained after 10 min sintering at 850 °C under 100 MPa. Density and microstructural measurements indicate that densification is first driven by the viscous flow of a vitreous phase containing Cs, formed during calcination. Additionally, the density of the sample then increases further during sintering by grain boundary diffusion. However, a limited but non negligible part of cesium is lost during densification.

36 MATERIALS SCIENCE↗

Zinc aluminate (ZnAl 2 O 4 ) refractory aggregates: Dilatometric sintering studies and thermal expansion coefficient

ZnAl 2 O 4 has recently been reported to enhance thermomechanical properties and slag corrosion resistance of refractory castables. The pore generation and deleterious expansion during in situ ZnAl 2 O 4 formation can limit their amount in a refractory composition. A comprehensive dilatometric study is presented, identifying the optimum raw materials and processing conditions. Preformed ZnAl 2 O 4 refractory aggregates were synthesized from industrial ZnO and reactive Al 2 O 3 by two-stage firing at 1050 °C and 1700 °C resulting in 0% open porosity. The ZnAl 2 O 4 powder calcined at 1050 °C is also a good refractory matrix material as it has better sinterability than preformed refractory-grade MgAl 2 O 4 and calcined alumina. The thermal expansion coefficient of ZnAl 2 O 4 aggregate in the range of 70–1600 °C was found to be 10.7 × 10 –6 K –1 , which is similar to tabular Al 2 O 3 (10.3 × 10 –6 K –1 ) and MgAl 2 O 4 (10.3 × 10 –6 K –1 ), but lower than dead burned MgO (16.4 × 10 –6 K –1 ), creating the possibility of developing thermal shock resistant refractories by utilizing this mismatch.

36 MATERIALS SCIENCE↗

Efficacy of a Solution-Based Approach for Making Sodalite Waste Forms for an Oxide Reduction Salt Utilized in the Reprocessing of Used Uranium Oxide Fuel

This paper describes various approaches for making sodalite with a LiCl-Li2O oxide reduction salt used to recover uranium from used oxide fuel. The approaches include sol-gel and solution-based synthesis processes. As-made products were mixed with 5 and 10 mass% of a Na2O-B2O3-SiO2 glass binder and these, along with product without a binder, were heated using either a cold-press-and-sinter method or hot uniaxial pressing. The results demonstrate the limitation of sodalite yield due to the fast intermediate reactions between Na+ and Cl- to form halite in solution and Li2O and SiO2 to form lithium silicates (e.g., Li2SiO3 or Li2Si2O5) in the calcined and sintered pellets. The results show that pellets can be made with high sodalite fractions (~92 mass%) and low porosities using a solution-based approach and this LiCl-Li2O salt.

electrochemical↗

Optical vibrational spectra and proposed crystal structure of ε-UO 3

ε-UO 3 is an exotic polymorph in the uranium trioxide system with an undetermined crystal structure and limited optical vibrational spectroscopic data. To improve understanding of this compound, we synthesize and investigate the crystal structure and optical vibrational spectra of ε-UO 3 . Infrared spectra collected for ε-UO 3 are in good agreement with previously published results, and our studies extend the available data into the low-energy (600–100 cm –1 ) regime. For the first time, Raman spectra are presented for ε-UO 3 using both 785 and 532 nm excitation wavelengths. Previous reports suggest an impurity phase may be present in ε-UO 3 produced by calcination of U 3 O 8 ; however, spectral center-of-mass calculations, principal component analyses, and Raman spectroscopic mapping employed to investigate this possibility indicate that the product of U 3 O 8 calcined in O 3 (g) in this work is likely phase-pure. A possible novel structure solution for ε-UO 3 is determined via Rietveld refinement of powder X-ray diffraction data and is triclinic, P-1, with a = 4.01 Å, b = 3.85 Å, c = 4.18 Å, and α = 98.26°, β = 90.41°, γ = 120.46° (R wp = 8.30%). The asymmetric unit of ε-UO 3 consists of U(VI) in hexagonal bipyramidal coordination with displaced equatorial oxygen. Further analysis reveals that the structure of ε-UO3 is best described by a 2 × 1 × 2 supercell structure in P-1 with a = 8.03 Å, b = 3.86 Å, c = 8.37 Å with α = 98.26°, β = 90.41°, and γ = 120.46°, although a higher-symmetry structure is possible. Optical vibrational spectroscopic and structural measurements of ε-UO 3 presented here furthers our understanding of this complex uranium oxide and clarifies the origin of reported structural similarity to U 3 O 8 .

-UO3↗

Optical vibrational spectroscopic signatures related to U 3 O 8 production processes

Uranium ore concentrates are materials found early within the nuclear fuel cycle and contain high concentrations of uranium in an easily transported form, making the concentrates a likely target for illegal diversion. These concentrates are typically converted to U 3 O 8 for further processing and, therefore, may lose specific physicochemical characteristics in determining the materials’ source and processing history. In this work, we explore the Raman spectra of eight oxide samples produced from various uranium ore concentrates and processing pathways to examine the presence of spectroscopic signatures relating to each sample's process history. Samples produced from amine extraction and dialkylphosphoric acid extraction processes show unique characteristics due to high concentrations of α-UO 3 , whereas samples calcinated from metallic diuranates do not form pure α-U 3 O 8 because of metallic ion inclusions. Pure α-U 3 O 8 oxide samples are obtained through calcination of ammonium diuranate, ammonium uranyl carbonate, and metastudtite intermediates. The Raman spectra of these oxide samples show close agreement with pristine α-U 3 O 8 spectra. However, deviations from the pristine spectra are observed in the 300–460 cm -1 spectral range. In conclusion, these deviations are unique identifying signatures that were likely created by lasting effects from the process history. Spectral center of mass calculations indicate grouping of samples based on processing history.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

La and Al co-doped CaMnO 3 perovskite oxides: From interplay of surface properties to anion exchange membrane fuel cell performance

This work reports the first account of perovskite oxide and carbon composite oxygen reduction reaction (ORR) catalysts integrated into anion exchange membrane fuel cells (AEMFCs). Perovskite oxides with a theoretical stoichiometry of Ca 0.9 La 0.1 Al 0.1 Mn 0.9 O 3-δ are synthesized by an aerogel method and calcined at various temperatures, resulting in a set of materials with varied surface chemistry and surface area. Material composition is evaluated by X-ray diffraction, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The perovskite oxide calcined at 800 degrees C shows the importance of balance between surface area, purity of the perovskite phase, and surface composition, resulting in the highest ORR mass activity when evaluated in rotating disk electrodes. Integration of this catalyst into AEMFCs reveals that the best AEMFC performance is obtained when using composites with 30:70 perovskite oxide:carbon composition. Doubling the loading leads to an increase in the power density from 30 to 76 mW cm -2 . The AEMFC prepared with a composite based on perovskite oxide and N-carbon achieves a power density of 44 mW cm -2 , demonstrating an ~50% increase when compared to the highest performing composite with undoped carbon at the same loading.

36 MATERIALS SCIENCE↗

Preparation and characterization of mesoporous N-doped and sulfuric acid treated anatase TiO{sub 2} catalysts and their photocatalytic activity under UV and Vis illumination

Nitrogen-doped TiO{sub 2} catalysts were prepared by a precipitation method. The samples were calcined at 400 deg. C for 4 h in air. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), low temperature N{sub 2}-adsorption was used for structural characterization and UV-diffuse reflectance (UV-DR) was applied to investigate the optical properties of the as-prepared samples. It was found that microporous N-doped catalysts have solely anatase crystalline structure. Acidic treatment of the calcined samples was performed using sulfuric acid agitation. The crystalline structure remained unchanged due to surface treatment, while the porosity and the surface areas (a{sub BET}{sup S}) were decreased dramatically. Optical characterization of the doped catalysts showed that they could be excited by visible light photons in the 400-500 nm wavelength range (lambda{sub g,1}={approx}390 nm, lambda{sub g,2}={approx}510 nm). It was also established that surface treatment enhances the Vis-light absorption of the N-TiO{sub 2} powders. Finally the catalysts were tested in the photocatalytic degradation of phenol in aqueous suspensions. Two different light sources were used; one of them was a UV-rich high pressure Hg-lamp, while the other was a tubular visible light source. We found that using visible light illumination N-doped, acid treated TiO{sub 2} samples were more catalytically active than non-doped TiO{sub 2} catalysts. - Graphical abstract: The effect of the acid treatment on the visible-light-driven photocatalytic activity of the N-doped, anatase TiO{sub 2} catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and release behavior of composites of camptothecin and layered double hydroxide

A simple method, reconstruction of calcinated layered double hydroxides (CLDH) in an organic (ethanol)-water mixed solvent medium containing drug, was developed to intercalate partially a non-ionic and poorly water-soluble drug (camptothecin) into the gallery of layered double hydroxides (LDHs) to form the drug-LDH composites. The purpose of choosing organic-water mixed solvent is to increase remarkably the solubility of camptothecin (CPT) in the reconstruction medium. A probable morphology of CPT molecules in the gallery of LDHs is that CPT molecules arrange as monolayer with the long axis parallel to the LDH layers. The in vitro drug release from the composites was remarkably lower than that from the corresponding physical mixture, which shows these drug-inorganic composites can be used as a potential drug delivery system. - Graphical abstract: A simple method, reconstruction of calcinated LDHs in an organic-water medium containing drug, was developed to intercalate non-ionic and poorly water-soluble camptothecin into the gallery of LDHs.

36 MATERIALS SCIENCE↗

TPR investigations on the reducibility of Cu supported on Al{sub 2}O{sub 3}, zeolite Y and SAPO-5

Reducibility of Cu supported on Al{sub 2}O{sub 3}, zeolite Y and silicoaluminophosphate SAPO-5 has been investigated in dependence on the Cu content using a method combining conventional temperature programmed reduction (TPR) by hydrogen with reoxidation in N{sub 2}O followed by a second the so-called surface-TPR (s-TPR). The method enables discrimination and a quantitative estimation of the Cu oxidation states +2, +1 and 0. The quantitative results show that the initial oxidation state of Cu after calcination in air at 400 deg. C, independent on the nature of the support, is predominantly +2. Cu{sup 2+} supported on Al{sub 2}O{sub 3} is quantitatively reduced by hydrogen to metallic Cu{sup 0}. Comparing the TPR of the samples calcined in air and that of samples additionally pre-treated in argon reveals that in zeolite Y and SAPO-5 Cu{sup 2+} cations are stabilized as weakly and strongly forms. In both systems, strongly stabilized Cu{sup 2+} ions are not auto-reduced by pre-treatment in argon at 650 deg. C, but are reduced in hydrogen to form Cu{sup +}. The weakly stabilized Cu{sup 2+} ions, in contrast, may be auto-reduced by pre-treatment in argon at 650 deg. C forming Cu{sup +} but are reduced in hydrogen to metallic Cu{sup 0}. - Graphical Abstract: TPR, TPR-(act), s-TPR and s-TPR-(act) profiles of (1.36)Cu/SAPO-5 (A), (4.55)Cu/SAPO-5 (B) and (9.19)Cu/SAPO-5 (C) samples. The intensities of TCD signals in (A) and (B) are multiplied by 4.5 and 2, respectively. Highlights: > Cu supported on SAPO-5, alumina and zeolite Y was investigated by TPR and s-TPR. > Cu oxidation states can be discriminated and quantitatively determined. > In zeolite Y and SAPO-5 Cu{sup 2+} cations are stabilized at weak and strong forms. > Strongly stabilized Cu{sup 2+} cannot be auto-reduced in argon at 650 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth of oriented vanadium pentaoxide nanostructures on transparent conducting substrates and their applications in photocatalysis

A novel, hydrothermal and hard-template-free method was developed for the first time to grow oriented, single-crystalline monoclinic VO{sub 2} (B) flower-like nanorod films on transparent conductive fluorine-doped tin oxide (FTO) substrates. The length and morphology of the nanorods can be tuned by changing the growth parameters, such as growth time and initial precursor concentration. The flower-like V{sub 2}O{sub 5} films were obtained after post-calcination treatment of VO{sub 2} (B) films. The photocatalytic activity of V{sub 2}O{sub 5} films was investigated by the degradation of methylene blue (MB) under UV and visible light. The prepared V{sub 2}O{sub 5} film exhibited good photocatalytic performance (74.6% and 63% under UV and visible light for 210 min, respectively) and more practical application in industry. - Graphical abstract: Flower nanostructured vanadium oxide film was prepared by hydrothermal reaction for photocatalysis application. - Highlights: • Monoclinic VO{sub 2} nanorod array and flower-like nanostructure were directly grown on FTO substrate by hydrothermal reaction. • The growth mechanism was analyzed by FESEM at different time. • V{sub 2}O{sub 5} flower-like nanostructure film was obtained after calcining VO{sub 2} film. • V{sub 2}O{sub 5} film exhibited good light activity and potential application in photocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis of Bismuth(III) coordination polymer and its transformation to nano α-Bi{sub 2}O{sub 3} for photocatalytic degradation

A new Bi(III) coordination polymer Bi{sub 2}(Hpdc){sub 2}(pdc){sub 2}·2H{sub 2}O (H{sub 2}pdc=pyridine-2,6-dicarboxylic acid) was synthesized by hydrothermal method. Solid state thermal decomposition of this complex under 500 °C for 1 h led to the foliated Bi{sub 2}O{sub 3} nanoparticles, which were then characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Comparative study on their photocatalytic activity toward the degradation of rhodamine B (RhB), methylene blue (MB) and methyl orange (MO) in polluted water was explored, and the mechanism of these photocatalytic degradation was discussed. These results provided some interesting insights into their photocatalytic applications. - Graphical abstract: We regard Bi{sub 2}(Hpdc){sub 2}(pdc){sub 2}·2H{sub 2}O with 1D chain structures as the precursor, then calcinate the complex to prepare nano-powder α-Bi{sub 2}O{sub 3}. The photochemical experiment indicates that Bi{sub 2}(Hpdc){sub 2}(pdc){sub 2}·2H{sub 2}O can be used as an efficient photocatalyst for the degradation of RhB and MB. Interestingly, nano α-Bi{sub 2}O{sub 3} shows higher activity than the commercial Bi{sub 2}O{sub 3} for the degradation of RhB, MB or MO. Display Omitted - Highlights: • A novel dinuclear Bi(III) coordination polymer is hydrothermally synthesized. • Calcinating the precursor Bi-CP will result in the nano Bi{sub 2}O{sub 3} with foliated morphology. • Nano Bi{sub 2}O{sub 3} shows higher activity than the commercial Bi{sub 2}O{sub 3} for the degradation of dyes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Speciation of residual carbon contained in UO{sub 2}

UO{sub 2} powders were synthesized thanks to oxalic precipitation (platelet morphology) and sol-gel route and completely characterized. A secondary phase was found depending on the calcination atmospheres. This phase has been identified by Raman spectroscopy as graphitic material (i.e. carbon-based secondary compound) and quantified by thermogravimetric analyses. Its amount varies with the calcination atmosphere. The presence of this secondary phase has no significant effect on the lattice parameter and its specific surface area. - Graphical abstract: Figure 2: Raman spectroscopy of the three UO{sub 2} powders and of the dissolution residues.

36 MATERIALS SCIENCE↗

Titania nanotube powders obtained by rapid breakdown anodization in perchloric acid electrolytes

Titania nanotube (TNT) powders are prepared by rapid break down anodization (RBA) in a 0.1 M perchloric acid (HClO{sub 4}) solution (Process 1), and ethylene glycol (EG) mixture with HClO{sub 4} and water (Process 2). A study of the as-prepared and calcined TNT powders obtained by both processes is implemented to evaluate and compare the morphology, crystal structure, specific surface area, and the composition of the nanotubes. Longer TNTs are formed in Process 1, while comparatively larger pore diameter and wall thickness are obtained for the nanotubes prepared by Process 2. The TNTs obtained by Process 1 are converted to nanorods at 350 °C, while nanotubes obtained by Process 2 preserve tubular morphology till 350 °C. In addition, the TNTs prepared by an aqueous electrolyte have a crystalline structure, whereas the TNTs obtained by Process 2 are amorphous. Samples calcined till 450 °C have XRD peaks from the anatase phase, while the rutile phase appears at 550 °C for the TNTs prepared by both processes. The Raman spectra also show clear anatase peaks for all samples except the as-prepared sample obtained by Process 2, thus supporting the XRD findings. FTIR spectra reveal the presence of O-H groups in the structure for the TNTs obtained by both processes. However, the presence is less prominent for annealed samples. Additionally, TNTs obtained by Process 2 have a carbonaceous impurity present in the structure attributed to the electrolyte used in that process. While a negligible weight loss is typical for TNTs prepared from aqueous electrolytes, a weight loss of 38.6% in the temperature range of 25–600 °C is found for TNTs prepared in EG electrolyte (Process 2). A large specific surface area of 179.2 m{sup 2} g{sup −1} is obtained for TNTs prepared by Process 1, whereas Process 2 produces nanotubes with a lower specific surface area. The difference appears to correspond to the dimensions of the nanotubes obtained by the two processes. - Graphical abstract: Titania nanotube powders prepared by Process 1 and Process 2 have different crystal structure and specific surface area. - Highlights: • Titania nanotube (TNT) powder is prepared in low water organic electrolyte. • Characterization of TNT powders prepared from aqueous and organic electrolyte. • TNTs prepared by Process 1 are crystalline with higher specific surface area. • TNTs obtained by Process 2 have carbonaceous impurities in the structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoporous Ag/In{sub 2}O{sub 3} composite derived from indium organic framework as high performance formaldehyde sensor

Mesoporous Ag/In{sub 2}O{sub 3} composite materials with different concentrations of Ag particles have been prepared by the calcination of Ag{sup +}-entrapped indium-organic frameworks (InOFs). The structures and components of these MOF-derived Mesoporous Ag/In{sub 2}O{sub 3} composite materials have been characterized thoroughly. Gas sensing measurements indicated that the incorporation of metallic Ag particles into the mesoporous structure significantly improves the gas-sensing properties of In{sub 2}O{sub 3}. Specially, the response of 5% Ag-loaded In{sub 2}O{sub 3} sensor to 50 ppm formaldehyde is 5 times higher than that of pure In{sub 2}O{sub 3} particles at 210 °C, which is among the best formaldehyde sensor materials reported to date. Also, Ag/In{sub 2}O{sub 3} composite sensor exhibit short response time (~22 s) and excellent recovery. These results indicated that the InOF-derived mesoporous Ag/In{sub 2}O{sub 3} materials maybe can be used to fabricate high performance formaldehyde sensors in practice. - Graphical abstract: Mesoporous Ag/In{sub 2}O{sub 3} materials have been produced by calcining indium-organic frameworks showing very fast and extremely high response towards HCHO. - Highlights: • Thermal decomposition of indium-organic framework. • Ag-loaded mesoporous In{sub 2}O{sub 3} materials. • Fast and high responses to HCHO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗