SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
NREL's dynamic hosting capacity analysis can help you better understand the thresholds at which new distributed photovoltaic (DPV) systems will trigger upgrades to the electrical distribution system. This fact sheet is for PV developers.
NREL's dynamic hosting capacity analysis can help you better understand the thresholds at which new distributed photovoltaic (DPV) systems will trigger upgrades to the electrical distribution system. This fact sheet details NREL's analysis for utilities.
NREL's dynamic hosting capacity analysis can help you better understand the thresholds at which new distributed photovoltaic (DPV) systems will trigger upgrades to the electrical distribution system. This fact sheet summarizes NREL's capabilities for policy makers.
This presentation gives a high-level overview of past and current results related to advanced PV inverter functions, such as volt/var control, and how such functions enable higher PV hosting capacity levels in distribution systems.
This fact sheet focuses specifically on one element of the long-term planning process, the capacity expansion model. It highlights the key advances in these models to enable planning for systems with growing shared of renewable energy and storage.
Interest in defect engineering for lithium-ion battery (LIB) materials is sparked by its ability to tailor electrical conductivity and introduce extra active sites for electrochemical reactions. However, harvesting excessive intrinsic defects in the bulk of the electrodes rather than near their surface remains a long-standing challenge. Here, a versatile strategy of quenching is demonstrated, which is exercised in lithium titanate (Li 4 Ti 5 O 12 , LTO), a renowned anode for LIBs, to achieve off-stoichiometry in the interior region. In situ synchrotron analysis and atomic-resolution microscopy reveal the enriched oxygen vacancies and cation redistribution after ice-water quenching, which can facilitate the native unextractable Li ions to participate in reversible cycling. Further, the fabricated LTO anode delivers a sustained capacity of 202 mAh g -1 in the 1.0–2.5 V range with excellent rate capability and overcomes the poor cycling stability seen in conventional defective electrodes. The feasibility of tuning the degree of structural defectiveness via quenching agents is also proven, which can open up an intriguing avenue of research to harness the intrinsic defects for improving the energy density of rechargeable batteries.
Abstract High‐throughput computational studies for discovery of metal–organic frameworks (MOFs) for separations and storage applications are often limited by the costs of computing thermodynamic quantities. Recent such studies at the time of writing may use ab initio results for a narrow selection of MOFs or empirical force‐field methods for larger selections. Here, a proof‐of‐concept study is conducted using Bayesian optimization on CH 4 uptake capacity of hypothetical MOFs for an existing dataset (Wilmer et al., Nature Chem. 2012, 4 , 83). It is shown that less than 0.1% of the database needs to be screened with the Bayesian optimization approach to recover the top candidate MOFs. This opens the possibility for efficient screening of MOF databases using accurate ab initio calculations for future adsorption studies on a minimal subset of MOFs. Furthermore, Bayesian optimization and the surrogate model presented here can offer interpretable material design insights and the framework will be applicable in the context of other target properties.
Abstract Lithium metal is the key anode material for solid‐state‐batteries as its successful implementation will drastically increase their energy and power densities. However, anode contact loss during stripping leads to dendrites upon plating and subsequent cell failure. Design strategies to mitigate these issues are crucial to enable the use of lithium metal anodes. This paper reports the dissolution kinetics of composite anodes made of lithium metal and carbon nanotubes (CNTs) with a garnet‐type solid electrolyte (SE). In addition to an enhancement of the effective diffusion within the anode, its dissolution is fundamentally changed from being 2D to 3D. By maintaining contact with the SE, the CNTs facilitate lithium transport to the interface, which yields more than 20 mAh cm −2 discharge capacity at 100 µ A cm −2 without the application of external stack pressure ( > 1 MPa). Conclusions drawn from electrochemical data on the anode microstructure are validated using cryo‐focused‐ion‐beam scanning electron microscopy and correlated with the mechanical properties. Micro‐indentation, acoustic analysis, and stress–strain testing show that mechanical properties of the anode, like yield strength and hardness, are adjustable. Overall, it is shown that the mechanical and electrochemical properties of Li–CNT composite electrodes can be tailored to suit the requirements of a practical cell.
Abstract High‐efficiency separation of C 6 alkanes, particularly the mono‐ and dibranched isomers by using porous solids, is of paramount significance in the petrochemical industry and, remains a daunting challenge. In this work, we report the complete separation of linear/monobranched hexanes from their dibranched isomers through selective size‐exclusion by a microporous MOF, Zn‐tcpt (H 3 tcpt=2,4,6‐tris(4‐carboxyphenoxy)‐1,3,5‐triazine), with a two‐fold interpenetrated structure of hms nets. Importantly, its adsorption capacity and selectivity are notably higher than those of the previously reported adsorbents that can split mono‐ and dibranched alkane isomers. Dynamic breakthrough measurements verify the excellent separation of C 6 alkane isomers by Zn‐tcpt, and the size‐exclusion based separation mechanism has been confirmed by ab initio materials modeling. The high‐efficiency separation of alkane isomers by Zn‐tcpt can be attributed to its optimal pore dimensions as well as high porosity.
High-efficiency separation of C 6 alkanes, particularly the mono- and dibranched isomers by using porous solids, is of paramount significance in the petrochemical industry and, remains a daunting challenge. In this work, we report the complete separation of linear/monobranched hexanes from their dibranched isomers through selective size-exclusion by a microporous MOF, Zn-tcpt (H3tcpt=2,4,6-tris(4-carboxyphenoxy)-1,3,5-triazine), with a two-fold interpenetrated structure of hms nets. Importantly, its adsorption capacity and selectivity are notably higher than those of the previously reported adsorbents that can split mono- and dibranched alkane isomers. Dynamic breakthrough measurements verify the excellent separation of C 6 alkane isomers by Zn-tcpt, and the size-exclusion based separation mechanism has been confirmed by ab initio materials modeling. Furthermore, the high-efficiency separation of alkane isomers by Zn-tcpt can be attributed to its optimal pore dimensions as well as high porosity.
Lithium metal batteries suffer from dendrite formation and the associated safety hazards of thermal runaway reactions. In this study, we report the performances of a highly concentrated electrolyte (HCE) and a dilute LiPF6 electrolyte in lithium metal cells using LiNi 0.8 Co 0.1 Mn0.1O 2 . While the HCE exhibits lower bulk ionic conductivity than the dilute LiPF6 electrolyte, the cell conductivity is higher for the HCE system, indicating higher thermodynamic stability of the electrolyte against the electrodes. Full cell cycling demonstrates higher capacity for the HCE system, which declines as a function of cycle number due to the formation of decomposition products, similar to the dilute LiPF 6 system. The origin of the enhanced performance is the higher stability of the HCE against a Li metal anode as compared to the dilute LiPF 6 electrolyte. Cycling at higher temperatures further enhances the performance of the HCE, which is more thermally stable than the dilute LiPF 6 electrolyte.
Abstract Metal‐based non‐aqueous redox flow batteries have the potential for long‐term energy storage if stability requirements can be achieved. One such stability issue in metal coordination complexes arises from ligand shedding in the anolyte upon reduction. Recognizing that the free ligands are relatively more stable than the metal coordination complex under highly reducing conditions, we evaluated a family of metal‐free bipyridinium materials as flow battery anolytes with the corresponding iron coordination complex as the catholyte. Bipyridinium compounds were functionalized for increased electrochemical stability, cycled in flow cells to understand efficiencies, and analyzed for degradation products. Methylation of the bipyridine nitrogens increased electrochemical stability yet left the reduced molecule susceptible to radical‐induced bond cleavage. Subsequent functionalization of bipyridine with carbomethoxy groups resulted in good battery performance with 96 % Coulombic and 90 % voltage efficiency, and improved cycling stability over a methoxy‐substituted anolyte with 14 % vs 36 % capacity fade in the first charge‐discharge cycle.
Lithium (Li)-excess transition metal oxide materials which crystallize in the cation-disordered rock salt (DRX) structure are promising cathodes for realizing low-cost, high-energy-density Li batteries. However, the state-of-the-art electrolytes for Li-ion batteries cannot meet the high-voltage stability requirement for high-voltage DRX cathodes, thus new electrolytes are urgently demanded. It has been reported that the solvation structures and properties of the electrolytes critically influence the performance and stability of the batteries. In this study, the structure–property relationships of various electrolytes with different solvent-to-diluent ratios are systematically investigated through a combination of theoretical calculations and experimental tests and analyses. This approach guides the development of electrolytes with unique solvation structures and characteristics, exhibiting high voltage stability, and enhancing the formation of stable electrode/electrolyte interphases. These electrolytes enable the realization of Li||Li 1.094 Mn 0.676 Ti 0.228 O 2 (LMTO) DRX cells with improved performance compared to the conventional electrolyte. Specifically, Li||LMTO cells with the optimized advanced controlled-solvation electrolyte deliver higher specific capacity and longer cycle life compared to cells with the conventional electrolyte. Additionally, the investigation into the structure–property relationship provides a foundational basis for designing advanced electrolytes, which are crucial for the stable cycling of emerging high-voltage cathodes.
The vast chemical space of high entropy alloys (HEAs) makes trial-and-error experimental approaches for materials discovery intractable and often necessitates data-driven and/or first principles computational insights to successfully target materials with desired properties. In the context of materials discovery for hydrogen storage applications, a theoretical prediction-experimental validation approach can vastly accelerate the search for substitution strategies to destabilize high-capacity hydrides based on benchmark HEAs, e.g. TiVNbCr alloys. Here, in this study, machine learning predictions, corroborated by density functional theory calculations, predict substantial hydride destabilization with increasing substitution of earth-abundant Fe content in the (TiVNb) 75 Cr 25-x Fe x system. The as-prepared alloys crystallize in a single-phase bcc lattice for limited Fe content x < 7, while larger Fe content favors the formation of a secondary C14 Laves phase intermetallic. Short range order for alloys with x < 7 can be well described by a random distribution of atoms within the bcc lattice without lattice distortion. Hydrogen absorption experiments performed on selected alloys validate the predicted thermodynamic destabilization of the corresponding fcc hydrides and demonstrate promising lifecycle performance through reversible absorption/desorption. This demonstrates the potential of computationally expedited hydride discovery and points to further opportunities for optimizing bcc alloy ↔ fcc hydrides for practical hydrogen storage applications.
Beavers ( Castor ) stand out among mammals for their unique capacity to fell trees using their large, ever-growing incisors. This routine consumption of resistant fodder induces prodigious wear in the lower incisors, despite this blunting effect the incisors maintain a remarkably sharp cutting edge. Notably, the enamel edges of their incisors show a highly complex two-part microstructure of which the biomechanical import is unknown. Here, using fracture analysis, nanoindentation, and wear testing on North American beaver ( C. canadensis ) incisors we test the microstructure's possible contribution to maintaining incisal sharpness. Although comparable in hardness, the inner enamel preferentially fails and readily wears at 2.5 times the rate of the outer enamel. The outer microstructure redirects all fractures in parallel, decreasing fracture coalescence. Conversely, the inner microstructure facilitates crack coalescence increasing the wear rate by isolating layers of enamel prisms that readily fragment. Together these two architectures form a microstructurally driven self-sharpening mechanism contained entirely within the thin enamel shell. Here, our results demonstrate that enamel microstructures exposed at the occlusal surface can markedly influence both enamel crest shape and surface texture in wearing dentitions. The methods introduced here open the door to exploring the biomechanical functionality and evolution of enamel microstructures throughout Mammalia.
Nannochloropsis oceanica CCMP1779 is an oleaginous heterokont microalga that is particularly amenable to synthetic biology approaches. The underlying complex genetic engineering often requires the expression of multiple transgenes (gene stacking). We integrated several techniques into a vector toolkit for multi-gene expression, including: multiple resistance marker genes, bidirectional promoters, and assembly of multiple expression cassettes into a single vector. We developed a series of gateway entry and destination vectors for assembly of two bidirectional promoter expression cassettes, which facilitates combinatorial high-capacity gene stacking. Several endogenous bidirectional promoters were demonstrated to be effective for driving transgene expression, with a dual-luciferase reporter system used to monitor transgene expression under different environmental conditions. The bidirectional promoter between the nitrate reductase and the nitrate transporter genes drives nitrogen source dependent transcription, enabling conditional transgene expression. Lethal concentrations of the antibiotics, Blasticidin, G418, and Nourseothricin, were determined and the corresponding marker genes used for genomic transformation selection.
Copper exchanged chabazites are among the state-of-the-art catalyst materials being studied for selective catalytic reduction of NOx, however, there is still a need to understand how these materials store ammonia after aging. In this work, studies are performed to assess the ammonia storage capacity of Cu-SSZ-13 as a function of concentration, temperature, and extent of hydrothermal aging. Ammonia binds at three difference sites: (i) a Cu site bound at 1 framework Al (Z 1 Cu site), (ii) a Cu site bound at 2 framework Al (Z 2 Cu site), and (iii) a Brønsted acid site (ZH site). Results show that a 3-site model can accurately capture ammonia storage across all conditions. Impacts for hydrothermal aging are considered via 3 aging reactions that change the site densities of each identified adsorption site. Model assessment shows that during aging there is a significant loss in Brønsted acid sites.
This study presents an innovative configuration of a thermoelectric subcooler (TES) integrated with an air-source heat pump (ASHP). The TES is installed in the liquid line, where it absorbs heat from the refrigerant. On its hot side, it discharges heat to the return air in heating mode or to the supply air in cooling mode, enabling year-round operation. The ASHP–TES system was evaluated under various conditions to reduce supplemental heating needs and improve dehumidification. Experimental heating tests revealed that activating the TES increased the heating capacity by 12%–20%. However, this occurred with a 7.6%–10% reduction in heating coefficient of performance (COP). In cooling mode, TES operation significantly improved moisture removal. The TES reduced the sensible heat ratio (SHR) and enhanced dehumidification, removing 20%–50% more moisture than a conventional system when meeting the same sensible load. The TES can be turned off to use the refrigerant subcooler for reheat supply air or turned on to substantially boost dehumidification. When meeting the same latent load, the ASHP–TES system achieved up to 33% energy savings compared with a conventional ASHP using resistance heating. Relative to a conventional ASHP paired with a whole-house dehumidifier, the ASHP–TES system provided up to 20% energy savings. These findings underscore the potential of TES integration to improve latent load control and enhance overall energy efficiency in hybrid ASHP systems, especially in cold and humid climates.