Search NASA⌕ Search

SEARCH · Search NASA

Results for “CORROSIVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Microencapsulation of Corrosion Indicators for Smart Coatings

A multifunctional smart coating for the autonomous detection, indication, and control of corrosion is been developed based on microencapsulation technology. This paper summarizes the development, optimization, and testing of microcapsules specifically designed for early detection and indication of corrosion when incorporated into a smart coating. Results from experiments designed to test the ability of the microcapsules to detect and indicate corrosion, when blended into several paint systems, show that these experimental coatings generate a color change, indicative of spot specific corrosion events, that can be observed with the naked eye within hours rather than the hundreds of hours or months typical of the standard accelerated corrosion test protocols.. Key words: smart coating, corrosion detection, microencapsulation, microcapsule, pH-sensitive microcapsule, corrosion indicator, corrosion sensing paint

Li, Wenyan↗

PH and Electrochemical Responsive Materials for Corrosion Smart Coating Applications

Corrosion is a costly issue for military operations and civil industries. While most corrosion initiates from localized corrosion form, such as pitting, failure directly caused by localized corrosion is the most dangerous kind, because it is difficult to anticipate and prevent, occurs very suddenly and can be catastrophic. One way of preventing these failures is with a coating that can detect and heal localized corrosion. pH and other electrochemical changes are often associated with localized corrosion, so it is expected that materials that are pH or otherwise electrochemical responsive can be used to detect and control corrosion. This paper will review various pH and electrochemical responsive materials and their potential applications in corrosion smart coatings. Current research results in this field will also be reported.

Li, Wenyan↗

pH Responsive Microcapsules for Corrosion Control

The best coatings for corrosion protection provide not only barriers to the environment, but also a controlled release of a corrosion inhibitor, as demanded by the presence of corrosion or mechanical damage. NASA has developed pH sensitive microcapsules (patent pending) that can release their core contents when corrosion starts. The objectives of the research presented here were to encapsulate non-toxic corrosion inhibitors, to incorporate the encapsulated inhibitors into paint formulations, and to test the ability of the paints to control corrosion. Results showed that the encapsulated corrosion inhibitors, specifically Ce(NO3)3 , are effective to control corrosion over long periods of time when incorporated at relatively high pigment volume concentrations into a paint formulation.

Calle, Luz Marina↗

Corrosion of Ferrous Alloys by Organic Compounds in Simulated Bio-Oils

Bio-oils derived from biomass contain organic species and acids that can be corrosive to steel-based structural materials used for pipelines and storage tanks. It is, therefore, important to assess corrosivity of organic constituents in bio-oils and identify ferrous alloys with sufficient corrosion resistance. In this work, lactobionic acid, formic acid and catechol were selected for corrosive constituents in bio-oils and used to formulate simulated bio-oils where 4 ferrous alloys, including 2.25Cr-1Mo steel and type 410, 201 and 316 stainless steels, were tested by Electrochemical Impedance Spectroscopy (EIS). The corrosivity of each simulated bio-oils was assessed using R2, a charge transfer limiting resistance fitted from EIS spectra. Whie 2.25Cr-1Mo steel exhibited active corrosion with low R2 values, the stainless steels showed high R2 values associated with passive state. The values of R2, considered proportional to the stability of the passive film, appeared lower in lactobionic acid than the other simulated bio-oils for the stainless steels, suggesting that lactobionic acid could be more aggressive to passive film than the other constituents of bio-oils. The overall goal of this work is to use EIS to systematically study the impact of bio-oil constituents on corrosion of candidate structural materials for bio-oil production, transport, and storage, as well as provide feedback for potential optimization of bio-oil chemistries to reduce the risk of corrosion.

Jun, Jiheon↗

Long-Term Corrosion Studies Of Pine Derived Bio-Oil And Blends With Heavy Fuel Oil

Biomass derived liquid fuels offer a means to reduce greenhouse gas emissions compared to those produced by combustion of petroleum derived liquid fuels. However, the corrosivity of bio-oils toward the less expensive structural materials creates a material selection problem for designers of storage tanks and combustion systems. Samples of candidate structural materials are being exposed for thousands of hours in multiple fast pyrolysis bio-oils and conditions to evaluate the corrosion resistance of these materials. One method to mitigate the corrosivity of bio-oils and speed their adoption, while also decreasing the pollution issues associated with low quality petroleum derived fuels, is to utilize blends of bio-oil and heavy fuel oil in engines currently solely burning a petroleum-based fuel. In addition to the corrosion studies conducted in 100% bio-oil, studies were also conducted with blends of the fast pyrolysis bio-oil produced from pine tree components with a heavy fuel oil that is used in ocean-going ships. This bio-oil had a very high carboxylic acid content which made it very corrosive to carbon and 2¼ Cr-1 Mo steel and even 409 stainless steel. The heavy fuel oil was not corrosive to carbon steel, but its sulfur content makes it a significant pollution producer and particularly undesirable for use near coastlines. Corrosion tests were conducted with the individual components and with various blends of the two liquid fuels. Studies showed a significantly lower corrosivity of the blends than would be projected assuming linear mixing behavior. Adoption of such blends holds the potential to reduce production of sulfur-containing exhaust gases as well as carbon dioxide from non-renewable fuels.

Keiser, Jim↗

Effect of Drying on Corrosion Mitigation of Hanford Transfer Lines

Radioactive waste is stored in underground, carbon-steel double-shell tanks at the Department of Energy Hanford site. The waste is transferred between the tanks and other assets using the transfer lines spanning throughout the various tank farms at Hanford. The transfer lines consist of a pipe-in-pipe design, small diameter pipes, and are not piggable. Recent inspection data of the transfer lines have shown areas with corrosion on both interior of the encasements and exterior of the primary pipes, with nearly 50 percent wall loss on the primary pipes and nearly 25% wall loss on the encasement pipes due to pitting corrosion. The visual inspections of the transfer lines have shown presence of corrosion products near the pipeline risers and beyond. It has been hypothesized that the corrosion is predominantly due to the high humidity conditions and in some cases is driven by the presence of residual hydrotest water in the encasement and the associated contact with the safety significant primary pipe. Therefore, drying of the transfer lines could lead to corrosion mitigation. Experimental studies are being conducted to understand the effect of environmental conditions, especially, relative humidity and temperature, on transfer line grade carbon steel corrosion and on mitigating corrosion. The experimental conditions are selected based on the seasonal temperature changes, and relative humidity conditions ranging from 30 to 100 percent. The experimental data will be used as guidance for maintaining a dry environment that will help mitigate the transfer-line corrosion caused by the high humidity conditions.

Shukla, Pavan K.↗

Influences of Quench Cooling Rate on Microstructure and Corrosion Resistance of Al-Cu-Mg Alloy Based on the End-Quenching Test

To investigate the effects of the quench cooling rate on corrosion resistance of Al-Cu-Mg alloy, an end-quenching test was conducted and the microstructures at different cooling rates were observed by SEM and TEM. Additionally, the corrosion resistance was characterized by an intergranular corrosion test and electrochemical test. Moreover, the finite element method was applied to simulate the end quenching process. The results indicate that the actual end quenching process can be approximated as one-dimensional heat transfer, and the cooling rate varies at different cooling distances. By affecting the microstructures, decreasing the cooling rate leads to a decline in the corrosion properties. Low cooling rates coarsen the constituent particles and grain boundary particles, resulting in a wide precipitation-free zone and an increase in the intensity of corrosion reactions. A high cooling rate concentrates on the intragranular precipitant, which can reduce the pitting depth and represents a conversion from localized corrosion to general corrosion.

36 MATERIALS SCIENCE↗

Corrosion Behavior of Weathering Steel Under Thin Electrolyte Layer at Different Relative Humidity

The corrosion behavior of weathering steel under thin electrolyte layer (TEL) at different relative humidity (RH) was investigated by cathodic polarization, electrochemical impedance spectroscopy, electrochemical noise, SEM/EDS, XRD and Raman spectroscopy. The results indicate that during the initial stage, the corrosion rate increases as the RH decreases when the initial thickness of TEL is above 100 μm. During the middle and final corrosion stages, the corrosion behavior of weathering steel is influenced by RH, the initial thickness of TEL and corrosion product. The TEL corrosion is divided into three types, and a weathering steel corrosion model under TEL and bulk solution is also proposed.

36 MATERIALS SCIENCE↗

Microstructure, Phase Occurrence, and Corrosion Behavior of As-Solidified and As-Annealed Al-Pd Alloys

In the present work, we studied the microstructure, phase constitution, and corrosion performance of Al{sub 88}Pd{sub 12}, Al{sub 77}Pd{sub 23}, Al{sub 72}Pd{sub 28}, and Al{sub 67}Pd{sub 33} alloys (metal concentrations are given in at.%). The alloys were prepared by repeated arc melting of Al and Pd granules in argon atmosphere. The as-solidified samples were further annealed at 700 °C for 500 h. The microstructure and phase constitution of the as-solidified and as-annealed alloys were studied by scanning electron microscopy, energy-dispersive x-ray spectroscopy, and x-ray diffraction. The alloys were found to consist of (Al), ε{sub n} (~ Al{sub 3}Pd), and δ (Al{sub 3}Pd{sub 2}) in various fractions. The corrosion testing of the alloys was performed in aqueous NaCl (0.6 M) using a standard 3-electrode cell monitored by potentiostat. The corrosion current densities and corrosion potentials were determined by Tafel extrapolation. The corrosion potentials of the alloys were found between − 763 and − 841 mV versus Ag/AgCl. An active alloy dissolution has been observed, and it has been found that (Al) was excavated, whereas Al in ε{sub n} was de-alloyed. The effects of bulk chemical composition, phase occurrence and microstructure on the corrosion behavior are evaluated. The local nobilities of ε{sub n} and δ are discussed. Finally, the conclusions about the alloy’s corrosion resistance in saline solutions are provided.

36 MATERIALS SCIENCE↗

Influence of Surface Pretreatment on the Corrosion Resistance of Cold-Sprayed Nickel Coatings in Acidic Chloride Solution

Corrosion resistance of the cold-sprayed nickel coatings deposited on the Ni surface (substrate) without and with abrasive grit-blasting treatment of the substrate was investigated. The corundum powder with different grain sizes was used. The corrosive environment contained an acidic chloride solution. The mechanism of the corrosion of nickel was suggested and discussed. Corrosion electrochemical parameters were determined by electrochemical methods. The corrosion effect of a nickel coating depends on the grain size used to prepare the substrate. The nickel coating after the medium grit-blasting treatment of the substrate was found to be the most corrosion resistant. However, the smallest resistance on the corrosion effect should be attributed to the nickel coating on the substrate after the coarse grit-blasting treatment.

36 MATERIALS SCIENCE↗

Corrosion Behavior of Nano-/Ultrafine-Grained Al-0.2 wt.% Sc Alloy Produced by Accumulative Roll Bonding (ARB)

The corrosion behavior of the Al-0.2 wt.% Sc alloy fabricated by the accumulative roll bonding (ARB) process in a 3.5 wt.% NaCl solution was studied using the electrochemical impedance spectroscopy and potentiodynamic polarization techniques. The effect of the microstructural parameters, such as dislocation density, texture, grain boundary, and lattice strain, on the corrosion behavior was also investigated in this study. The results demonstrated that the ARB process can significantly improve the corrosion resistance and modify the corrosion potential to attain higher positive potentials. In addition, the pitting corrosion changed into the lateral spreading of the pits at the seventh and tenth cycles of the ARB process with average grain size of 410 and 370 nm, respectively. The change in the fraction of the high-angle grain boundary during the ARB process is the most important parameter regarding the variation in corrosion type. The average grain size of 410 nm in seventh cycle, as the optimum average grain size, demonstrated the highest corrosion resistance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Anodic Role of Ni-Containing LPSO Phases During the Microgalvanic Corrosion of Mg{sub 98}Gd{sub 1.5}Ni{sub 0.5} Alloy

In the present study, the corrosion characteristics of cast Mg{sub 98}Gd{sub 1.5}Ni{sub 0.5} alloy with Ni-containing long-period stacking ordered (LPSO) structures were investigated. The results reveal that the Ni-containing LPSO phases were more active than the Mg matrix and preferentially eroded during the immersion process. This behavior indicates that the Ni-containing LPSO phases could have acted as microanodes, in contrast to the cathodic role of the Ni-free LPSO phases in other Mg alloys. Furthermore, the potential difference of approximately 600 mV between the phases accelerated the dissolution rate of the LPSO phase. Corrosion of the Mg matrix also occurred due to the inhomogeneous microstructure of the matrix. The synergetic corrosion between the Ni-containing LPSO phases and the enrichment of Cl{sup −} in the thick corrosion product films dominated the propagation of corrosion, which substantially deteriorated the corrosion resistance and accelerated the corrosion process of the Mg{sub 98}Gd{sub 1.5}Ni{sub 0.5} alloy.

36 MATERIALS SCIENCE↗

Corrosion and Electrochemical Behavior of Sn-2Ag-0.5Cu Lead-Free Solders Solidified with Magnet Stirring

In this study, permanent magnet stirring (PMS) was applied to modify the crystallographic texture and corrosion resistance of Sn-2Ag-0.5Cu (SAC205) solders. The results indicate that PMS transforms the lamellar structure into equiaxed grains. Following the initiation corrosion process, the crystallographic texture shows a new class of grains that consists of single-crystal morphology with {111}{sub Sn} facets before applying PMS. This could result in severe corrosion of β-Sn crystals with non-uniform corrosion rate caused by the orientation effect of (111). The corrosion rate for SAC205 solder, measured by immersion tests in 3.5% NaCl solution at 25 °C, was significantly decreased from 31 to 8 mpy after applying PMS. This change in corrosion resistance of SAC205 solder can be attributed to the improved anodic and cathodic reaction activities caused by the modification of microstructure and crystallographic texture. The mechanism of pitting and sequential corrosion events is fully explained and discussed.

36 MATERIALS SCIENCE↗

A review on molten sulfate salts induced hot corrosion

Hot corrosion has been extensively observed in various high temperature applications, which might cause large economic losses. Here, to deepen the insight and understanding of hot corrosion, we provide a detailed discussion on hot corrosion induced by molten sulfate salt, in which Na 2 SO 4 is the main chemical reactant. The hot corrosion is triggered and sustained by the negative solubility gradient of protective oxide from the oxide/salt interface to salt/gas interface. In this work, we reviewed several key factors, including temperature, gas composition, molten salt composition, alloy element and external stress, influencing the hot corrosion of alloy beneath the molten salt. The application of anti-corrosion coating seems to be the most effective and commercial mothed to mitigate hot corrosion. Therefore, the progress of the development of effective coatings, e.g., Ni-Cr coatings, aluminide coatings, silicide coatings and MCrAlY(X) coatings, has also been summarized.

36 MATERIALS SCIENCE↗

Development of hydrothermal corrosion model and BWR metal coating for CVD SiC in light water reactors

SiC/SiC fiber composites with CVD SiC overcoats are potential candidates for light water reactor advanced accident tolerant cladding materials. Understanding its corrosion kinetics in Light Water Reactor (LWR) conditions is essential to evaluate the concept's viability. Existing models only account for the temperature and oxygen concentration effect on the hydrothermal corrosion behavior applicable to LWR operating conditions. However, the development of a general corrosion rate for CVD SiC that accounts for the impact of irradiated microstructure, flow rate, electrical resistivity, pH, and surface roughness is critical for the practical realization of SiC/SiC-based cladding concepts. After a rigorous experimental campaign, this work updates the existing hydrothermal corrosion model to predict hydrothermal corrosion in LWRs. Numerical radiation and coolant chemistry analysis for LWRs conducted based on the updated corrosion kinetic models suggests that CVD SiC is likely a viable environmental barrier coating for Pressurized Water Reactors while questionable for Boiling Water Reactors (BWR) when the effect of irradiation damage on SiC corrosion is considered. An effective mitigation strategy for the double-layer metal coating is proposed for BWR applications. The double-layer metal coating comprising a FeCrAl overcoat with an intermediate Cr bond coating was observed to provide a stable protective barrier against SiC dissolution in BWR conditions. Finally, the proposed metal coating was also fully adherent following quench and burst tests.

36 MATERIALS SCIENCE↗

Surface composition, microstructure and corrosion resistance of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam

High-intensity pulsed ion beam (HIPIB) irradiation of AZ31 magnesium alloy is performed and electrochemical corrosion experiment of irradiated samples is carried out by using potentiodynamic polarization technology in order to explore the effect of HIPIB irradiation on corrosion resistance of magnesium alloy. The surface composition, cross-sectional morphology and microstructure are characterized by using electron probe microanalyzer, optical microscope and transmission electron microscope, respectively. The results indicated that HIPIB irradiation leads to a significant improvement in corrosion resistance of magnesium alloy, in terms of the considerable increase in both corrosion potential and pitting breakdown potential. The microstructural refinement and surface purification induced by HIPIB irradiation are responsible for the improved corrosion resistance. - Research Highlights: {yields} A modified layer about 30 {mu}m thick is obtained by HIPIB irradiation. {yields} Selective ablation of element/impurity phase having lower melting point is observed. {yields} More importantly, microstructural refinement occurred on the irradiated surface. {yields} The modified layer exhibited a significantly improved corrosion resistance. {yields} Improved corrosion resistance is ascribed to the combined effect induced by HIPIB.

36 MATERIALS SCIENCE↗

Intergranular corrosion resistance of Zn modified 5××× series Al alloy during retrogression and re-aging treatment

Highlights: • Increase the strength due to precipitation hardening of T-Mg{sub 32}(AlZn){sub 49} phase in the Zn modified Al-Mg alloy. • Both high corrosion resistance and high strength are achieved by retrogression and re-aging treatment in Al-5Mg-3Zn alloy. • Large Mg and Zn content difference between GBP and PFZ results in relatively high IGC susceptibility. • The intergranular corrosion mechanism of Zn modified Al-Mg alloy during retrogression and re-aging treatment is clarified. - Abstract: The effects of retrogression and re-aging treatment on the intergranular corrosion behavior of Al-5.0Mg-3.0Zn alloys are systematically studied. The alloy's strength increases when retrogression temperature increases from 390 °C to 420 °C. Samples retrogressed at 390 °C then re-aged are very susceptible to intergranular corrosion and those retrogressed at 405 °C and 420 °C express good corrosion resistance. Then the alloy's corrosion susceptibility rises with increasing retrogression temperature. Grain boundary precipitates are coarsened and distributed discontinuously with decreasing retrogression temperature. Higher retrogression temperature results in higher Mg and Zn content difference and intergranular corrosion susceptibility.

36 MATERIALS SCIENCE↗

Atomistic Mechanisms of Stress-Dependent Molten Salt Corrosion in NiCr Alloys

Ni-based structural alloys in molten salt environments often experience simultaneous mechanical loading and corrosive attack, yet the mechanisms governing stress-corrosion interactions remain unclear. Prior studies largely emphasize tensile stress, while the role of compressive stress has received limited attention. Here, reactive molecular dynamics simulations are used to investigate the coupled effects of applied strain and corrosion in Ni 0.75 Cr 0.25 exposed to molten FLiNaK at 800 °C. A Σ5(210) grain boundary model is subjected to tensile (+4%) to compressive (−4%) uniaxial strains, and corrosion behavior is evaluated through fluorine adsorption, charge redistribution, and grain boundary evolution. Tensile strain accelerates intergranular corrosion susceptibility by reducing local atomic packing through elastic dilation and increasing excess free volume at the grain boundary, which enhances atomic mobility and salt infiltration. In contrast, compressive strain can suppress corrosion by promoting the formation of a ridge-like surface layer along the grain boundary, limiting salt access to the underlying alloy. These results provide atomistic insight into how stress states influence grain boundary corrosion in molten salts.

36 - MATERIALS SCIENCE↗