SEARCH · Search NASA

Results for “Calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Unsteady laminar boundary-layer calculations on oscillating configurations including backflow. Part 1: Flat plate, oscillating in its own plane

A finite difference method has been developed to calculate the unsteady boundary layer over an oscillating flat plate. Low- and high frequency approximations were used for comparison with numerical results. Special emphasis was placed on the behavior of the flow and on the numerical calculation procedure as soon as reversed flow has occurred over part of the oscillation cycle. The numerical method displayed neither problems nor singular behavior at the beginning of or within the reversed flow region. Calculations, however, came to a limit where the back-flow region reached the plate's leading edge in the case of high oscillation amplitudes. It is assumed that this limit is caused by the special behavior of the flow at the plate's leading edge where the boundary layer equations are not valid.

Geissler, W.↗

NASA NTRS1982

Multiple scattering calculations of rain effects

The multiple scattering calculations of rain effects are studied on the basis of calculating the incoherent intensity at 30, 60, 90, and 120 GHz. The Mie solution and the Laws-Parsons distribution are used to determine scattering and absorption characteristics. The equation of transfer and the Stokes parameters are used to determine incoherent intensities for the horizontal and vertical polarizations. The ratio of the copolarized incoherent intensity to the copolarized coherent intensity is defined as the incoherent copolarized discrimination. The ratio of the cross-polarized incoherent intensity is defined as the incoherent cross-polarized discrimination. These ratios are calculated in terms of copolarized attenuation, rain rate, and field of view. The results show that multiple scattering effects may become significant during heavy rains.

Ishimaru, A.↗

NASA NTRS1982

Calculation of exact vibration modes for plane grillages by the dynamic stiffness method

A dynamic stiffness method is developed for the calculation of the exact modal parameters for plane grillages which consist of straight and uniform beams with coincident elastic and inertial axes. Elementary bending-torsion beam theory is utilized, and bending translation is restricted to one direction. The exact bending-torsion dynamic stiffness matrix is obtained for a straight and uniform beam element with coincident elastic and inertial axes. The element stiffness matrices are assembled using the standard procedure of the static stiffness method to form the dynamic stiffness matrix of the complete grillage. The exact natural frequencies, mode shapes, and generalized masses of the grillage are then calculated by solving a nonlinear eigenvalue problem based on the dynamic stiffness matrix. The exact modal solutions for an example grillage are calculated and compared with the approximate solutions obtained by using the finite element method.

Hallauer, W. L., Jr.↗

NASA NTRS1983

Calculation of viscous supersonic flows over finned bodies

The parabolized Navier-Stokes (PNS) equations are used to calculate the viscous, supersonic flow fields about a six-finned projectile and a generic four-finned missile at angles of attack. Since current computer speeds and storage preclude a fully three-dimensional calculation using the unsteady, Reynolds-averaged, Navier-Stokes equations, the applicability of the PNS equations to the above flow fields is of considerable interest. Two important aspects of the calculation are grid generation and the type of smoothing used to prevent nonphysical solutions. This paper includes a description of the grid-generation process. Results in the form of density contours and velocity vector plots are presented for the two configurations. The applicability of the PNS equations to the complicated flow fields considered is successfully demonstrated.

Rai, M. M.↗

NASA NTRS1983

Quasi-three-dimensional turbomachinery flow calculations on multiple hub-to-shroud stream surfaces

Results are presented from a quasi-three-dimensional calculation of steady (relative), inviscid, adiabatic, subsonic/shock-free transonic flow on multiple hub-to-shroud stream surfaces through turbomachinery blade rows. The quasi-three-dimensional technique incorporates some three-dimensional effects while retaining much of the simplicity of two-dimensional computational methods. Three typical turbomachinery flowfield calculations are presented including an axial-flow compressor rotor, a turbine stator vane cascade, and a radial-inflow turbine rotor. The calculations were performed using quasi-three-dimensional extensions of existing two-dimensional methods. The current results represent an intermediate step in the complete quasi-three-dimensional solution process. However, the results demonstrate the usefulness of the quasi-three-dimensional technique in complementing and extending the applicability of the two-dimensional methods of turbomachinery flow analysis.

Thompson, H. D.↗

NASA NTRS1983

Calculation of the polarization potential for e-N2 collisions

A polarization potential V(pol) for e-N2 collisions is calculated by the generalization of the static part of the method of polarized orbitals to molecular targets. Partial differential equations (PDE) are derived for polarized orbitals, which are functions of the distance (r) from the molecular center and angle (theta) from the molecular axis. The equations are solved with the use of the noniterative PDE technique. From the polarized orbitals a polarization potential can be constructed whose r and theta dependence is found to be significantly different from the well-known phenomenological one. The two potentials are further compared by carrying out limited hybrid-theory scattering calculations. Only those scattering results based on the calculated V(pol) are in satisfactory accord with experiment.

Onda, K.↗

NASA NTRS1984

The calculation of theoretical chromospheric models and the interpretation of solar spectra from rockets and spacecraft

Models and spectra of sunspots were studied, because they are important to energy balance and variability discussions. Sunspot observations in the ultraviolet region 140 to 168 nn was obtained by the NRL High Resolution Telescope and Spectrograph. Extensive photometric observations of sunspot umbrae and prenumbrae in 10 chanels covering the wavelength region 387 to 3800 nm were made. Cool star opacities and model atmospheres were computed. The Sun is the first testcase, both to check the opacity calculations against the observed solar spectrum, and to check the purely theoretical model calculation against the observed solar energy distribution. Line lists were finally completed for all the molecules that are important in computing statistical opacities for energy balance and for radiative rate calculations in the Sun (except perhaps for sunspots). Because many of these bands are incompletely analyzed in the laboratory, the energy levels are not well enough known to predict wavelengths accurately for spectrum synthesis and for detailed comparison with the observations.

Avrett, E. H.↗

NASA NTRS1984

Calculating C-grids with fine and embedded mesh regions

A program for calculating a C-type mesh around airfoil like shapes is described. The Jameson/Caughey approach is used: a parabolic transformation coupled with a shearing transformation. The algebraic algorithm is capable of efficiently generating nearly orthogonal grids. A high degree of grid control is possible. The user may specify grid boundaries, number of grid lines, and location of (and spacing in) trailing edge and leading edge fine mesh areas. The capability of embedding fine mesh regions, for use with new adaptive grid techniques, is being developed. Grids generated by the program were used in Euler flow flow calculatons by W. Usab. Results superior to results calculated on previous O-type grids were obtained. Specifically, calculations converged faster using C-grids rather than 0-grids, total pressure loss spikes at the trailing edge of the airfoil were eliminated, and the Ni method converged with zero artificial smoothing for a subcritical case (resulting overall total pressure loss was then nearly zero). These improvements were attributed to higher grid orthogonality, especially at the trailing edge. The program itself is fairly straightforward. Roughly half of the 800 code lines are comment lines.

Loyd, B.↗

NASA NTRS1984

An assessment of the capability to calculate tilting prop-rotor aircraft performance, loads and stability

Calculated performance, loads, and stability of the XV-15 tilt rotor research aircraft are compared with wind tunnel and flight measurements, to define the level of the current analytical capability for tilting prop rotor aircraft, and to define the requirements for additional experimental data and further analysis development. The correlation between calculated and measured behavior is generally good, although there are some significant discrepancies. Based on this correlation, the analysis is assessed overall as being adequate for the design, evaluation, and testing of tilting prop rotor aircraft. A general assessment of the state of the art of tilt rotor predictive capability is given. Specific areas are identified where improvements in the capability to calculate performance, loads, and stability are desirable. Requirements for more accurate and detailed data which support the development of improved analytical models are identified as well.

Johnson, W.↗

NASA NTRS1984

Static and dynamic structural-sensitivity derivative calculations in the finite-element-based Engineering Analysis Language (EAL) system

The implementation of static and dynamic structural-sensitivity derivative calculations in a general purpose, finite-element computer program denoted the Engineering Analysis Language (EAL) System is described. Derivatives are calculated with respect to structural parameters, specifically, member sectional properties including thicknesses, cross-sectional areas, and moments of inertia. Derivatives are obtained for displacements, stresses, vibration frequencies and mode shapes, and buckling loads and mode shapes. Three methods for calculating derivatives are implemented (analytical, semianalytical, and finite differences), and comparisons of computer time and accuracy are made. Results are presented for four examples: a swept wing, a box beam, a stiffened cylinder with a cutout, and a space radiometer-antenna truss.

Camarda, C. J.↗

NASA NTRS1983

Unsteady laminar boundary-layer calculations on oscillating configurations including backflow. Part 2: Airfoil in high-amplitude pitching motion. Dynamic stall

A previously developed finite-difference procedure for calculating unsteady, incompressible, laminar boundary layers on an oscillating flat plate is applied to a wing section undergoing high-amplitude pitching oscillations about various mean incidences. To start the entire boundary-layer calculation, appropriate initial conditions and outer boundary conditions are specified, using a stagnation-point fixed frame of reference. The breakdown of the numerical calculation procedure in the x,t-domain is interpreted to coincide with unsteady separation. Details of the boundary-layer behavior in the vicinity of separation are investigated, and a close analogy between the present results and those for a three-dimensional steady separation is found.

Geissler, W.↗

NASA NTRS1984

Unsteady transonic aerodynamic and aeroelastic calculations about airfoils and wings

The development and application of transonic small disturbance codes for computing two dimensional flows, using the code ATRAN2, and for computing three dimensional flows, using the code ATRAN3S, are described. Calculated and experimental results are compared for unsteady flows about airfoils and wings, including several of the cases from the AGARD Standard Aeroelastic Configurations. In two dimensions, the results include AGARD priority cases for the NACA 64A006, NACA 64A010, NACA 0012, and MBB-A3 airfoils. In three dimensions, the results include flows about the F-5 wing, a typical wing, and the AGARD rectangular wings. Viscous corrections are included in some calculations, including those for the AGARD rectangular wing. For several cases, the aerodynamic and aeroelastic calculations are compared with experimental results.

Goorjian, P. M.↗

NASA NTRS1984

Comparison of measured and calculated airloads on an energy efficient transport wing model equipped with oscillating control surfaces

Wind-tunnel measurements of steady and unsteady pressures for a high-aspect-ratio supercritical wing model are compared with calculations by the linear unsteady aerodynamic lifting-surface theory, known as the Doublet Lattice method, at Mach numbers of 0.650 (subsonic) and 0.78 (transonic). The steady-pressure data comparisons are made for incremental changes in angle of attack and control-surface deflection. The unsteady-pressure data comparisons are made for oscillating control-surface deflections. Some differences between the measured and calculated aerodynamics are attributed to viscous and transonic effects that are not accounted for in the Doublet Lattice analysis. Comparisons of the transonic unsteady-pressure data for the oscillating control surfaces are improved by applying empirical corrections based on the steady-pressure measurements to the unsteady Doublet Lattice calculations.

Mccain, W. E.↗

NASA NTRS1984

Calculation of nonequilibrium radiation in the flight regimes of aeroassisted orbital transfer vehicles

A computer code has been developed that calculates radiative properties of nonequilibrium air in the low-density regimes expected during the flight of aeroassisted, orbital transfer vehicles. From the given nonequilibrium thermodynamic state variables, the code calculates number densities of internal states and the accompanying emission and absorption characteristics. In addition, the code calculates the number density of the hypothetical gas in radiative equilibrium that produces the same radiation emission as the given nonequilibrium gas. Sample results are shown to demonstrate how the code predicts the nonlinear variation of radiation with density at low densities.

Park, C.↗

NASA NTRS1984

Calculations of turbulent mass transport in a bluff-body diffusion-flame combustor

Experimental measurements of turbulent mass transit in a bluff-body diffusion-flame combustor (using CO2 instead of fuel) are analyzed to evaluate the accuracy of physical models used in flow computations. The data of Lightman and Magill (1981), Lightman et al. (1983), and Roquemore et al. (1983) are used to calculate apparent turbulent Schmidt numbers (TSN) for a series of flow conditions by a modified TEACH viscous-flow code. The modeling principles, calculation grid, and boundary conditions are discussed, and the results are presented in graphs comparing calculated and measured values. It is shown that models such as the two-equation (K - epsilon) model which use a single value of the TSN are inappropriate for conditions typical of gas-turbine combustors: local TSN variations due to turbulence behavior must be taken into account in improved models.

Sturgess, G. J.↗

NASA NTRS1984

Calculation of steady and oscillating airfoil flow fields via the Navier Stokes equations

A Navier-Stokes calculation procedure is applied to high Reynolds number flow about steady and unsteady airfoils. The procedure solves the ensemble averaged governing equations via a linearized block implicit (LBI) technique which in general converges to a nominal steady flow within 120 time steps. The grid used in the computation is highly stretched thus resolving the turbulent boundary layers. Calculations have been compared with data for both NACA 4412 airfoil at high incidence and an NACA 0012 airfoil oscillating in dynamic stall. In both cases, good agreement is noted between measured and calculated surface pressure distributions.

Shamroth, S. J.↗

NASA NTRS1982

Model calculations of lightning electric fields

Calculated time-domain waveforms and frequency spectra are presented for three of the most important processes in a lightning discharge to ground: the return stroke, the stepped leader, and the preliminary breakdown. For each of these processes, the model calculations are given for 200 m and 50 km. The calculations are compared with available time and frequency domain measurements.

Master, M. J.↗

NASA NTRS1984

Statistical mechanics of light elements at high pressure. VI - Liquid-state calculations with Thomas-Fermi-Dirac theory

A model free energy is developed for hydrogen-helium mixtures based on solid-state Thomas-Fermi-Dirac calculations at pressures relevant to the interiors of giant planets. Using a model potential similar to that for a two-component plasma, effective charges for the nuclei (which are in general smaller than the actual charges because of screening effects) are parameterized, being constrained by calculations at a number of densities, compositions, and lattice structures. These model potentials are then used to compute the equilibrium properties of H-He fluids using a charged hard-sphere model. The results find critical temperatures of about 0 K, 500 K, and 1500 K, for pressures of 10, 100, and 1000 Mbar, respectively. These phase separation temperatures are considerably lower (approximately 6,000-10,000 K) than those found from calculations using free electron perturbation theory, and suggest that H-He solutions should be stable against phase separation in the metallic zones of Jupiter and Saturn.

Macfarlane, J. J.↗