Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cloud Layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Jupiter's Turbulent Power Spectra from Hubble Space Telescope

Turbulence in Jupiter's atmosphere was investigated with archival and ongoing observations from the Hubble Space Telescope. Data sets that include one full rotation (360° longitude coverage) were used to produce complete maps of the planet's upper cloud layer. The global maps were analyzed to generate the passive tracer power spectrum of cloud features for single rotation observations, while successive rotations produced pairs of maps such that zonal winds were calculated. An atmosphere's dimensionality and dynamics are reflected in the slopes of such turbulent power spectra. Many of the retrieved passive tracer power spectra have a shallow spectral index over wave numbers k∼1 − 30 and transition to the well‐known Kolmogorov k(exp −5/3) relation at smaller scales between wave numbers k∼30 − 1,000. The transition scale is similar to the number of jets in Jupiter's zonal wind profile and is related to the Rhines scale and the beta effect induced anisotropy scale. We also report on differences found in anticyclonic and cyclonic shear region power spectra and how they correlate to latitudinal changes in the zonal wind profile. We found that properties of Jupiter's power spectra are consistent with quasi‐geostrophic turbulence for shallow fluids.

Richard G. Cosentino↗

Venus cloud structure and water vapor abundance from Mariner 10 observations

Observations of the Venus atmosphere with the infrared radiometer on Mariner 10 have been analyzed by Taylor (1975) in terms of the vertical distribution of opacity at wavelengths near 11 microns and 45 microns in the thermal infrared. In this paper, we discuss models of the Venus atmosphere which are consistent with the inferred opacity structure. Either a two-layer cloud structure, or a single cloud deck overlaid by a layer containing approximately 40 precipitable microns of water vapor, would have the required limb-darkening characteristics at the wavelengths of observation.

Taylor, F. W.↗

A Data Library of Liquid Clouds Modelled With a Large Eddy Simulation Framework

We describe a library of atmospheric large eddy simulations (LES) of liquid-phase boundary layer clouds constructed to enable aerosol–cloud–turbulence interaction studies, support parameterization evaluation and development, and provide training data for machine learning applications. The simulations use a modern LES framework designed for high numerical accuracy, coupled to a detailed spectral bin microphysical scheme. Case studies are configured to represent observed conditions in four key global cloud regions—the Northeastern Atlantic, Northeastern Pacific, Continental United States and Southern Ocean—following a semi-idealised approach. The library also includes aerosol concentration halving and doubling experiments to expose the sensitivities of the case studies to aerosol perturbations. Simulation results are compared to observations on a case-by-case basis, then the library's coverage is evaluated in terms of spreads in meteorological factors and atmospheric boundary layer attributes.

aerosol↗

Local variation of haze thickness on the equatorial region of Venus

The horizontal distribution of haze particles in the equatorial region of Venus was investigated using selected polarimetry maps obtained by the Orbiter Cloud Photopolarimeter (OCP) aboard the Pioneer Venus Orbiter, with five of these maps having been acquired on five consecutive terrestrial days. Nine sets of OCP polarimetry maps (PM) similar to PM 16 employed by Kawabata et al. (1980) were selected, and 935 nm data points were extracted to construct a cloud-haze model, from which the haze fraction f(h) within the cloud and the corresponding optical thickness tau(h) were determined for the period from December 1978 to October 1980. The results indicate that, in this period, the upper cloud layer of Venus had haze layers with tau(h) of about 0.02. Furthermore, the submicron particles present within the principal cloud contributed approximately 6 percent to the total scattering cross section per unit volume. Although no systematic time variations in the derived values of tau(h) and f(h) were noticeable, the consecutive five day observations indicated a presence of a large-scale horizontal inhomogeneity in haze particle distribution.

Kawabata, Kiyoshi↗

Optimized MODIS Channel Selection to Improve the NASA CERES FluxByCloudType Product Fluxes

The NASA Clouds and the Earth’s Radiant Energy System (CERES) project has provided the climate community more than a 20-year record of top of the atmosphere (TOA) reflected shortwave (SW) and emitted longwave (LW) fluxes. The fluxes used to monitor the Earth’s energy balance as well as for climate model validation and cloud feedback studies. One of the largest uncertainties in climate models is the response of clouds in feedback studies. To reduce this uncertainty requires more stringently validation of model generated fluxes by cloud-type. Rather than relying on radiative transfer model generated fluxes from observed cloud-type retrievals, the CERES FluxByCloudType (FBCT) product, relies on MODIS empirical narrowband to broadband relationships to convert the cloudy portions of the CERES footprints into fluxes. The overcast footprint and sub-footprint cloud layer fluxes are then stratified by 7 pressure layers and 6 optical depth bins and temporally averaged into daily and monthly regional cloud-type fluxes. The CERES project analyzed a total of 19 MODIS channels for use in the next generation FBCT product narrowband to broadband conversion. This was accomplished by comparing the narrowband to broadband RMS errors from all possible 5-channel combinations. The SW and LW optimized channels were selected by also considering analogous geostationary, MODIS and VIIRS imager channels as well as channel combinations that provided the lowest RMS errors across all surface types. The optimized channel combinations will be tested in the FBCT algorithm to investigate any cloud fraction, effective pressure, optical depth, PW, solar and view angle, surface type and regional narrowband to broadband dependencies.

CERES↗

Three-Channel Sunphotometer Cloud Mode Value-Added Product Report

A primary source of uncertainty in Earth system model (ESM) predictions is the representation of cloud processes and associated cloud feedback. Several fundamental cloud properties critical to the understanding of aerosol-cloud interactions are poorly constrained by observations, with key deficiencies in our observations of cloud and precipitation droplet sizes and cloud optical depth. Observations of these cloud properties are often challenging to estimate from remote-sensing platforms and costly to obtain from in situ aircraft. Nevertheless, observations of boundary-layer clouds, and improved knowledge of stratocumulus cloud (Sc) processes, are especially important to ESM advancement. This is because these clouds have extensive coverage and exert controls on boundary-layer dynamics and the global radiative energy balance.

54 ENVIRONMENTAL SCIENCES↗

On the dynamics of stratocumulus formation and dissipation

Results obtained with a mixed layer model are used to study the dynamics of stratocumulus formation and dissipation in subtropical marine stratocumulus cloud regimes. The model used allows entrainment to be driven by shear as well as buoyancy, and includes a very crude parameterization of the partial blackness of thin cloud layers. Model results show that for some values of the large-scale divergence there are three equilibrium mixed layer structures, two of which are stable. One of the stable equilibria is cloudy, deep, and buoyancy-driven, while the other is clear, shallow, and shear-driven. It is found that as a result of hysteresis effects a transient increase in the large-scale divergence can produce a long-lasting break in the clouds.

Randall, D. A.↗

Aerosol Radiative Effects over Ascension Island Using LASIC Observations and MERRA-2

Marine boundary layer clouds, including the transition from stratocumulus to cumulus, are poorly represented in numerical weather prediction and general circulation models. In many cases, the complex physical relationships between marine boundary cloud morphology and the environmental conditions in which the clouds exist are not well understood. Such uncertainties arise in the presence of biomass burning carbonaceous aerosol, as is the case over the southeast Atlantic Ocean. It is likely that the absorbing and heating properties of these aerosols influence the microphysical composition and macrophysical arrangement of marine stratocumulus and trade cumulus in this region; however, this has yet to be quantified. The deployment of the Atmospheric Radiation Measurement Mobile Facility #1 (AMF1) in support of LASIC (Layered Atlantic Smoke Interactions with Clouds) provided a unique opportunity to collect observations of cloud and aerosol properties during two consecutive biomass burning seasons during July through October of 2016 and 2017 over Ascension Island (7.96 S, 14.35 W). Thermodynamic profiles will be analyzed through the unique combination of sounding data from radiosonde launches and microwave profiling radiometers, giving observations of additional quantities important for cloud development such as CAPE and CIN at a fine temporal resolution. The thermodynamic profiles will be presented in conjunction with detailed observations of the cloud structure over the site from a K-band cloud radar, micropulse lidar, and laser ceilometer. Finally, the observed thermodynamic and cloud profiles will be used as input forcing, alongside aerosols from the Modern Era Retrospective analysis for Research and Applications, version 2 (MERRA-2), for the Rapid Radiative Transfer Model (RRTM) to gain information regarding the radiative heating profiles. Idealized experiments using RRTM with and without aerosols will be used to quantify the impact of biomass burning carbonaceous aerosol plumes as they pass over the site.

Collow, Allie↗

Light Transfers Through a Koch Shape Cloud

Abstract Modeling radiative transfer in a 3D cloudy atmosphere is critical to climate projections. A recently developed fast 3D radiation parameterization scheme gains some success in quantifying horizontal radiative transfer through cloud sides using cloud area fraction. Based on 3D Monte Carlo simulations of radiative transfer through an idealized single‐layer cloud with Koch‐shaped fractal geometry edges, here we show that radiative energy transport through cloud sides correlates more significantly with cloud area fraction than with cloud perimeter length. The results exemplify the importance of accounting for the horizontal radiative energy exchanges between cloud‐free and cloudy regions with cloud area fraction. Results from additional sensitivity simulations show that increased cloud vertical extent often enhances cloud‐side sunlight leak more significantly than cloud‐side sunlight interception. At low sun elevations, cloud‐side sunlight interception is enhanced more than cloud‐side sunlight leak does with the increase of cloud mass.

58 GEOSCIENCES↗

Impact on cloud properties of reduced-sulphur shipping fuel in the Eastern North Atlantic

The global reduction in shipping fuel sulphur that culminated in 2020 with an ∼ 80 % reduction has created a large-scale natural experiment on the role of aerosol-cloud interaction (ACI) in the climate system. We compare observations from the Atmospheric Radiation Measurement program's Eastern North Atlantic site (ARM-ENA; 39.1° N, 28.0° W) during two June to September periods: 2016–2018 (pre-2020) and 2021–2023 (post-2020). We find a significant (∼ 15 %) decrease in cloud condensation nuclei concentrations post-2020, which resulted in a decrease in cloud droplet number (N d ) and an increase in effective radius (r e ) of marine boundary layer clouds. However, cloud liquid water path (LWP) increased post-2020. The increase in LWP offset the increase in r e , resulting in insignificant changes to optical depth. MODIS and CERES data in the vicinity of ENA during these periods produce similar results also with negligible change in albedo and optical depth. Regional cloud occurrence declined in line with changes in the large-scale meteorology. Our results highlight the complex interplay of factors that modulate cloud feedbacks in the Eastern North Atlantic.

Mace, Gerald G. [Univ. of Utah, Salt Lake City, UT↗

Spectral absorption of solar radiation in cloudy atmospheres A 20/cm model

A radiative transfer model based on both LOWTRAN transmission functions (at a 20/cm resolution), and Monte Carlo simulations of wavelength distributions, is used to determine the spectral absorption of solar radiation in typical water clouds. This yields the relative absorption by the vapor and droplets within each cloud. The results obtained indicate a slightly lower absorption than had previously been found, with boundary layer clouds typically absorbing 9 percent of the terrestrial insolation for an overhead sun. This absorption is strongly dependent on the presence of water vapor above the cloud top and solar zenith angle. Droplets, rather than vapor, are shown to be the dominant absorbers within the cloud except in the absence of water vapor above the cloud top.

Davies, R.↗

The Influence of Thermodynamic Phase on the Retrieval of Mixed-Phase Cloud Microphysical and Optical Properties in the Visible and Near Infrared Region

Cloud microphysical and optical properties are inferred from the bidirectional reflectances simulated for a single-layered cloud consisting of an external mixture of ice particles and liquid droplets. The reflectances are calculated with a rigorous discrete ordinates radiative transfer model and are functions of the cloud effective particle size, the cloud optical thickness, and the values of the ice fraction in the cloud (i.e., the ratio of ice water content to total water content). In the present light scattering and radiative transfer simulations, the ice fraction is assumed to be vertically homogeneous; the habit (shape) percentage as a function of ice particle size is consistent with that used for the Moderate Resolution Imaging Spectroradiometer (MODIS) operational (Collection 4 and earlier) cloud products; and the surface is assumed to be Lambertian with an albedo of 0.03. Furthermore, error analyses pertaining to the inference of the effective particle sizes and optical thicknesses of mixed-phase clouds are performed. Errors are calculated with respect to the assumption of a cloud containing solely liquid or ice phase particles. The analyses suggest that the effective particle size inferred for a mixed-phase cloud can be underestimated (or overestimated) if pure liquid phase (or pure ice phase) is assumed for the cloud, whereas the corresponding cloud optical thickness can be overestimated (or underestimated).

Lee, Joonsuk↗

Height Distribution Between Cloud and Aerosol Layers from the GLAS Spaceborne Lidar in the Indian Ocean Region

The Geoscience Laser Altimeter System (GLAS), a nadir pointing lidar on the Ice Cloud and land Elevation Satellite (ICESat) launched in 2003, now provides important new global measurements of the relationship between the height distribution of cloud and aerosol layers. GLAS data have the capability to detect, locate, and distinguish between cloud and aerosol layers in the atmosphere up to 40 km altitude. The data product algorithm tests the product of the maximum attenuated backscatter coefficient b'(r) and the vertical gradient of b'(r) within a layer against a predetermined threshold. An initial case result for the critical Indian Ocean region is presented. From the results the relative height distribution between collocated aerosol and cloud shows extensive regions where cloud formation is well within dense aerosol scattering layers at the surface. Citation: Hart, W. D., J. D. Spinhime, S. P. Palm, and D. L. Hlavka (2005), Height distribution between cloud and aerosol layers from the GLAS spaceborne lidar in the Indian Ocean region,

Hart, William D.↗

Multilayered Clouds Identification and Retrieval for CERES Using MODIS

Traditionally, analyses of satellite data have been limited to interpreting the radiances in terms of single layer clouds. Generally, this results in significant errors in the retrieved properties for multilayered cloud systems. Two techniques for detecting overlapped clouds and retrieving the cloud properties using satellite data are explored to help address the need for better quantification of cloud vertical structure. The first technique was developed using multispectral imager data with secondary imager products (infrared brightness temperature differences, BTD). The other method uses microwave (MWR) data. The use of BTD, the 11-12 micrometer brightness temperature difference, in conjunction with tau, the retrieved visible optical depth, was suggested by Kawamoto et al. (2001) and used by Pavlonis et al. (2004) as a means to detect multilayered clouds. Combining visible (VIS; 0.65 micrometer) and infrared (IR) retrievals of cloud properties with microwave (MW) retrievals of cloud water temperature Tw and liquid water path LWP retrieved from satellite microwave imagers appears to be a fruitful approach for detecting and retrieving overlapped clouds (Lin et al., 1998, Ho et al., 2003, Huang et al., 2005). The BTD method is limited to optically thin cirrus over low clouds, while the MWR method is limited to ocean areas only. With the availability of VIS and IR data from the Moderate Resolution Imaging Spectroradiometer (MODIS) and MW data from the Advanced Microwave Scanning Radiometer EOS (AMSR-E), both on Aqua, it is now possible to examine both approaches simultaneously. This paper explores the use of the BTD method as applied to MODIS and AMSR-E data taken from the Aqua satellite over non-polar ocean surfaces.

Sun-Mack, Sunny↗

Airborne lidar observations of Arctic polar stratospheric clouds

Polar stratospheric clouds (PSC's) have been detected repeatedly during Arctic and Antarctic winters since 1978/1979 by the SAM II (Stratospheric Aerosol Measurement II) instrument aboard the NIMBUS-7 satellite. PSC's are believed to form when supercooled sulfuric acid droplets freeze, and subsequently grow by deposition of ambient water vapor as the local stratospheric temperature falls below the frost point. In order to study the characteristics of PSC's at higher spatial and temporal resolution than that possible from the satellite observations, aircraft missions were conducted within the Arctic polar night vortex in Jan. 1984 and Jan. 1986 using the NASA Langley Research Center airborne dual polarization ruby lidar system. A synopsis of the 1984 and 1986 PSC observations is presented illustrating short range spatial changes in cloud structure, the variation of backscatter ratio with temperature, and the depolarization characterics of cloud layers. Implications are noted with regard to PSC particle characteristics and the physical process by which the clouds are thougth to form.

Poole, L. R.↗

Multiwavelength scanning radiometer for airborne measurements of scattered radiation within clouds

A multi-wavelength scanning radiometer has been developed for measuring the angular distribution of scattered radiation deep within a cloud layer. The purpose of the instrument is to provide measurements from which the single scattering albedo of clouds can be derived as a function of wavelength. The radiometer has a 1-deg field of view and scans in the vertical plane from 5 deg before zenith to 5 deg past nadir (190 deg aperture). The thirteen channels of the cloud absorption radiometer are located between 0.5 and 2.3 microns and were selected to avoid the molecular absorption bands in the near-infrared. The first seven channels of the radiometer are simultaneously and continuously sampled, while the eighth registered channel is selected from among the six channels on a filter wheel. This paper describes the optical, mechanical and electrical design of the instrument and presents some early results obtained from measurements taken aboard the University of Washington's B-23 aircraft to illustrate the performance of the instrument.

King, Michael D.↗

Vertical aerosol structure of Neptune - Constraints from center-to-limb profiles

New center-to-limb (CTL) equatorial region profiles of Neptune have been extracted from spatially well-resolved images. The 8900-A CTL profile entails the presence of material above the 5-mbar level whose optical depth is less than 0.5. CH4-band data admit of thin scattering hazes in the 0.4-1.5 bar pressure level, although optical depths must be lower than 0.05; so thin a haze falls short of the reflected flux at 6340 A, thereby implying the presence of another scattering layer deeper than 1.5 bars. A good fit to the observed reflectivity is obtained by a bright cloud layer with an optical depth of 3.0.

Hammel, H. B.↗