Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cu surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Biomineralization of Cu 2 S Nanoparticles by Geobacter sulfurreducens

Biomineralization of Cu has been shown to control contaminant dynamics and transport in soils. However, very little is known about the role that subsurface microorganisms may play in the biogeochemical cycling of Cu. In this study, we investigate the bioreduction of Cu(II) by the subsurface metal-reducing bacterium Geobacter sulfurreducens. Rapid removal of Cu from solution was observed in cell suspensions of G. sulfurreducens when Cu(II) was supplied, while transmission electron microscopy (TEM) analyses showed the formation of electron-dense nanoparticles associated with the cell surface. Energy-dispersive X-ray spectroscopy (EDX) point analysis and EDX spectrum image maps revealed that the nanoparticles are rich in both Cu and S. This finding was confirmed by X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) analyses, which identified the nanoparticles as Cu 2 S. Biomineralization of Cu x S nanoparticles in soils has been reported to enhance the colloidal transport of a number of contaminants, including Pb, Cd, and Hg. However, formation of these Cu x S nanoparticles has only been observed under sulfate-reducing conditions and could not be repeated using isolates of implicated organisms. As G. sulfurreducens is unable to respire sulfate, and no reducible sulfur was supplied to the cells, these data suggest a novel mechanism for the biomineralization of Cu 2 S under anoxic conditions. The implications of these findings for the biogeochemical cycling of Cu and other metals as well as the green production of Cu catalysts are discussed.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Electrochemically-assisted removal of cadmium ions by redox active Cu-based metal-organic framework

An electrochemically-assisted wastewater treatment using Faradaic materials offers a promising technique for the selective removal of hazardous substances. Here, we demonstrate the reversible capture and release of cadmium ions in aqueous solutions, using a redox-active metal-organic framework (MOF) electrode. As-synthesized copper-based MOF (Cu-MOF-74; copper 2,5-dihydroxyterephthalate) is a highly attractive candidate for Faradaic electrosorption due to its large surface area, water stability, and redox-active metal nodes. Our work demonstrates the reversible capture and release of Cd 2+ ions assisted by the electrochemical redox reaction of Cu 2+ /Cu + within the MOF structure. Combined material characterization and electrosorption tests were carried out to determine the operational conditions for maximizing adsorption capacity, energy efficiency, and material stability, thus leading to excellent electrosorption (>100 mg g -1 ) and regeneration efficiency (>90%). This study demonstrates the feasibility of leveraging MOFs containing redox-active metal nodes for the selective separation of toxic cations, and paves the way for promising future applications of these 3-D porous structures for wastewater treatment and environmental remediation.

42 ENGINEERING↗
DOE OSTI2021

Heterogeneous photo-Fenton-like degradation of emerging pharmaceutical contaminants in wastewater using Cu-doped MgO nanoparticles

In this study, a facile thermal decomposition method was utilized to synthesize Cu-doped MgO nanoparticles possessing mesoporosity. These mesoporous Cu doped MgO nanoparticles were shown to be efficient photo-Fenton-like catalysts for the degradation of emerging pharmaceutical contaminants in wastewater and were able to completely oxidize salicylic acid within 1 hour under optimized conditions. Tetracycline was shown to be converted to other intermediates with a large portion of it undergoing full mineralization. Batch experiments were conducted to demonstrate the effects of Cu loading on MgO, overall catalyst loading, and H 2 O 2 concentration on the salicylic acid and tetracycline conversion and rate constants. Quenching experiments revealed that both •OH radicals or HO 2 •/•O 2 - radicals were involved in the reaction, with the latter showing a higher contribution. The surface dissolution of MgO was shown to facilitate a high pH environment which completely prevented Cu from leaching out of the catalyst while retaining high activity. The catalyst reusability was shown to be satisfactory with high activity and conversion being preserved over five cycles.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2026

Jahn–Teller distortion controls electron transfer in photoexcited Cu( I ) donor–acceptor systems

The Jahn–Teller distortion (JTD) is a defining structural response to electronic excitation in Cu( I )-based transition metal complexes, yet its role in photoinduced electron transfer (PET) remains largely unexplored. Here, we demonstrate that the JTD governs charge separation (CS) through a vibronically controlled conical intersection in heteroleptic Cu( I ) bisphenanthroline–naphthalene diimide (CuHETPHEN-NDI) donor–acceptor dyads. Using 20-fs broadband transient absorption spectroscopy combined with coherent vibrational wavepacket (CVWP) analysis and quantum chemical calculations, we directly track nuclear motions that steer the system from the metal-to-ligand charge-transfer ( 1 MLCT) state to the CS state. Steric bulkiness of the pendant groups at the 2,9-positions of the phenanthroline ligand systematically slows both JTD and CS. Short-time Fourier transformation and Fourier filtering analyses identify two key vibrational signatures: a low-frequency breathing mode (∼100 cm −1 ) via a bond distance change between Cu and ligated Ns (Cu–N) that modulates the NDI anion absorption and acts as a vibronic coupling coordinate, and a higher-frequency mode (∼313 cm −1 ) that evolves along the PET trajectory. Normal mode analysis and potential energy surface calculations show that the JTD brings the 1 MLCT and CS states into degeneracy, while the Cu–N breathing motion dynamically modulates donor–acceptor electronic coupling to enable ultrafast nonadiabatic electron transfer. Steric hindrance exerted by the groups at the 2,9 positions of the phenanthroline ligands suppresses this vibronic coupling, leading to faster CVWP decoherence for the 313 cm −1 mode and slower CS. These findings unravel JTD-controlled vibronic coupling at conical intersection as a governing factor for CS and provide insight into designing Cu-based photosensitizers by harnessing structural dynamics to control PET.

Kim, Pyosang [Argonne National Laboratory (ANL), A↗
DOE OSTI2021

Synthesis of Core@Shell Cu-Ni@Pt-Cu Nano-Octahedra and Their Improved MOR Activity

Fabrication of 3d metal-based core@shell nanocatalysts with engineered Pt-surfaces provides an effective approach for improving the catalytic performance. The challenges in such preparation include shape control of the 3d metallic cores and thickness control of the Pt-based shells. Herein, we report a colloidal seed-mediated method to prepare octahedral CuNi@Pt-Cu core@shell nanocrystals using CuNi octahedral cores as the template. By precisely controlling the synthesis conditions including the deposition rate and diffusion rate of the shell-formation through tuning the capping ligand, reaction temperature, and heating rate, uniform Pt-based shells can be achieved with a thickness of < 1 nm. Furthermore, the resultant carbon-supported CuNi@Pt-Cu core@shell nano-octahedra showed superior activity in electrochemical methanol oxidation reaction (MOR) compared with the commercial Pt/C catalysts and carbon-supported CuNi@Pt-Cu nano-polyhedron counterparts, demonstrating that both the lattice strain and shape effects arising from the as-prepared CuNi@Pt-Cu octahedral nanocatalysts play a crucial role in MOR performance.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Investigation of synchrotron X-ray induced oxidation of Ag–Cu thin-film

Combinatorial Ag-Cu thin-films were irradiated by synchrotron X-ray in air to investigate the beam damage on the surface of the thin-film. The main effect was found to be oxidation with the oxidation state primarily depending on film composition: CuO formed on the pure Cu film, whereas Cu 2 O formed in the presence of Ag. Meanwhile, formation of crystalline Ag 2 O 2 was favored and preferentially in the Ag-rich area. Lastly, these results are of great importance in studying the oxidation of noble metal nano-film, and in the characterization of nano-films using synchrotron X-ray.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Understanding the Effect of Single Atom Cationic Defect Sites in an Al 2 O 3 (012) Surface on Altering Selenate and Sulfate Adsorption: An Ab Initio Study

Adsorption is a promising under-the-sink selenate remediation technique for distributed water systems. Recently it was shown that adsorption induced water network rearrangement control adsorption energetics on the α-Al 2 O 3 (012) surface. Here, we aim to elucidate the relative importance of the water network effects and surface cation identity on controlling selenate and sulfate adsorption energy using density functional theory calculations. Density functional theory (DFT) calculations predicted the adsorption energies of selenate and sulfate on nine transition metal cations (Sc–Cu) and two alkali metal cations (Ga and In) in the α-Al 2 O 3 (012) surface under simulated acidic and neutral pH conditions. We find that the water network effects had a larger impact on the adsorption energy than the cationic identity. However, cation identity secondarily controlled adsorption. Most cations decreased the adsorption energy, weakening the overall performance, the larger Sc and In cations enabled inner-sphere adsorption in acidic conditions because they relaxed outward from the surface, providing more space for adsorption. Additionally, only Ti induced Se selectivity over S by reducing the adsorbing selenate to selenite but not reducing the sulfate. Altogether, this study indicates that tuning water network structure will likely have a larger impact than tuning cation–selenate interactions for increasing adsorbate effectiveness.

Adsorption↗
DOE OSTI2021

Unusual layer-by-layer growth of epitaxial oxide islands during Cu oxidation

Elucidating metal oxide growth mechanisms is essential for precisely designing and fabricating nanostructured oxides with broad applications in energy and electronics. However, current epitaxial oxide growth methods are based on macroscopic empirical knowledge, lacking fundamental guidance at the nanoscale. Using correlated in situ environmental transmission electron microscopy, statistically-validated quantitative analysis, and density functional theory calculations, we show epitaxial Cu 2 O nano-island growth on Cu is layer-by-layer along Cu 2 O(110) planes, regardless of substrate orientation, contradicting classical models that predict multi-layer growth parallel to substrate surfaces. Growth kinetics show cubic relationships with time, indicating individual oxide monolayers follow Frank-van der Merwe growth whereas oxide islands follow Stranski-Krastanov growth. Cu sources for island growth transition from step edges to bulk substrates during oxidation, contrasting with classical corrosion theories which assume subsurface sources predominate. Our results resolve alternative epitaxial island growth mechanisms, improving the understanding of oxidation dynamics critical for advanced manufacturing at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Electrochemical behavior of SnCl 2 and influence of Cu and Ni ions in molten LiCl−KCl−CaCl 2 eutectic

Reliable transport and thermodynamic data for multivalent ions in complex molten salts are scarce, limiting model fidelity for electrorefining and impurity control. Here, we report a comprehensive electrochemical characterization of SnCl₂ in LiCl–KCl–CaCl₂ (50.5–44.2–5.3 mol%) at 685 K, including the effects of Ni 2+ and Cu + impurities. Using cyclic voltammetry (CV), chronoamperometry (CA), and chronopotentiometry (CP), we quantified Sn 2+ and Ni 2+ diffusion with exceptional agreement across methods: Sn 2+ averaged (1.03 ± 0.10) × 10 −5 cm 2 s −1 , and Ni 2+ averaged (0.75 ± 0.19) × 10 −5 cm 2 s −1 . The tight confidence-interval overlap across CV, CA, and CP strengthens confidence in these values and is uncommon in molten chloride studies. Open-circuit-potential measurements provided standard apparent reduction potentials that closely match LiCl–KCl literature, indicating minimal shift with CaCl₂ present. The Sn 2+ /Sn couple behaves as a reversible two-electron soluble–insoluble process at 685 K; the Sn 4+ /Sn 2+ couple transitions to soluble–soluble behavior near 788 K, which may correlate with the decomposition of surface bound chlorostannates, though direct characterization remains to be established. In mixed systems, Cu+/Cu overlaps Sn 2+ /Sn, limiting Cusingle bondSn electroseparation, whereas the larger potential gap between Ni 2+ /Ni and Sn 2+ /Sn supports selective Ni removal. These internally consistent transport and thermodynamic data establish a validated basis for process modeling and optimization of Sn electrorefining and impurity management in LiCl–KCl–CaCl₂.

Berzins-Delahay↗
DOE OSTI2020

Nitrogen-doped graphene-wrapped Cu 2 S as a superior anode in sodium-ion batteries

Sodium-ion batteries (SIBs) have been attracting an ever-growing research interest, mainly ascribed to their cost-effectiveness. However, SIBs have been significantly hindered by lack of a suitable anode. Herein, an exceptional Cu 2 S-based composite anode is developed via a facile ball-milling method, in which Cu 2 S particles are wrapped by nitrogen-doped graphene sheets (Cu 2 S@NG). This Cu 2 S@NG composite anode enables extremely long cycling life, ultra-stable cyclability with high capacity, and excellent rate capability. The superior performance of the Cu 2 S@NG composite is owing to its intriguing core-shell structure and the exceptional properties of both the Cu 2 S and NG. In this study, it is found that the NG shell yields multiple merits in improving the performance of Cu 2 S: (i) mitigating the loss of active materials, (ii) constituting a stable interface, (iii) providing improved electrical conductivity and good ionic transfer, and (iv) enhancing mechanical integrity. Additionally, the vital effects of different voltage windows and a surface coating via atomic layer deposition on further enhancing performance are clarified. Significantly, the electrochemical mechanism of Cu 2 S during sodiation/desodiation is unveiled using advanced synchrotron-based in-situ X-ray diffraction and X-ray adsorption spectroscopy. This work represents a great advance in seeking high-performance anodes in SIBs.

25 ENERGY STORAGE↗
DOE OSTI2024

Observing Chemical and Morphological Changes in a Cu@TiO x Core@Shell Catalyst: Impact of Reversible Metal-Oxide Interactions on CO 2 Activation and Hydrogenation

A combination of several in-situ techniques (XRD, XAS, AP-XPS, E-TEM) was used to explore links between the structural and chemical properties of a Cu@TiO x catalyst under CO 2 hydrogenation conditions. The active phase of the catalyst involved an inverse oxide/metal configuration, but the initial core@shell motif was disrupted during the pre-treatment in H 2 . As a consequence of strong metal-support interactions, the titania shell cracked and Cu particles migrated from the core to on top of the oxide with the simultaneous formation of a Cu-Ti-O x phase. The generated Cu particles had a diameter of 20-40 nm and were decorated by small clusters of TiO x (< 5 nm in size). Results of in-situ XAS and XRD and images of E-TEM showed a very dynamic system, where the inverse oxide/metal configuration promoted the reactivity of the system towards CO 2 and H 2 . At room temperature, CO 2 oxidized the Cu nanoparticles (CO 2,gas → CO gas + O oxide ) inducing a redistribution of the TiO x clusters and big modifications in catalyst surface morphology. The generated oxide overlayer disappeared at elevated temperatures (> 180 °C) upon exposure to H 2 , producing a transient surface that was very active for the reverse water-gas shift reaction (CO 2 + H 2 → CO + H 2 O) but was not stable at 250 °C. When oxidation and reduction occurred at the same time, under a mixture of CO 2 and H 2 , the surface structure evolved toward a dynamic equilibrium that strongly depended on the temperature. Neither CO 2 nor H 2 can be considered as passive reactants. In the Cu@TiO x system, morphological changes were linked to variations in the composition of metal-oxide interfaces which were reversible with temperature or chemical environment and affected the catalytic activity of the system. Finally, the present study illustrates the dynamic nature of phenomena associated with the trapping and conversion of CO 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

A Micelle Electrolyte Enabled by Fluorinated Ether Additives for Polysulfide Suppression and Li Metal Stabilization in Li-S Battery

The Li-S battery is a promising next-generation technology due to its high theoretical energy density (2600 Wh kg -1 ) and low active material cost. However, poor cycling stability and coulombic efficiency caused by polysulfide dissolution have proven to be major obstacles for a practical Li-S battery implementation. In this work, we develop a novel strategy to suppress polysulfide dissolution using hydrofluoroethers (HFEs) with bi-functional, amphiphlic surfactant-like design: a polar lithiophilic "head" attached to a fluorinated lithiophobic "tail." A unique solvation mechanism is proposed for these solvents whereby dissociated lithium ions are readily coordinated with lithiophilic "head" to induce self-assembly into micelle-like complex structures. Complex formation is verified experimentally by changing the additive structure and concentration using small angle X-ray scattering (SAXS). These HFE-based electrolytes are found to prevent polysulfide dissolution and to have excellent chemical compatibility with lithium metal: Li||Cu stripping/plating tests reveal high coulombic efficiency (>99.5%), modest polarization, and smooth surface morphology of the uniformly deposited lithium. Li-S cells are demonstrated with 1395 mAh g-1 initial capacity and 71.9% retention over 100 cycles at >99.5% efficiency-evidence that the micelle structure of the amphiphilic additives in HFEs can prohibit polysulfide dissolution while enabling facile Li + transport and anode passivation.

25 ENERGY STORAGE↗
DOE OSTI2020

Probing the surface of promoted CuO-Cr 2 O 3 -Fe 2 O 3 catalysts during CO 2 activation

The influence of basic oxide promoters on copper-chromium-iron oxide catalysts was investigated to determine the nature of surface oxygen species and structure-activity relationship for the reverse water-gas shift reaction. The catalysts were characterized with in situ XRD, in situ Raman, in situ XPS, in situ HS-LEIS and H 2 -TPR. Two surface oxygen sites with different reduction characteristics were found to be present. The overall CO 2 activation rate was found to correlate with both the number and reducibility of the more active oxygen species that were likely associated with the Cu-FeO x interfacial regions for enhanced hydrogen spillover. While addition of K 2 O somewhat preserved the interfacial regions and facilitated the reduction kinetics of surface oxygen, both Na 2 O and CaO significantly suppressed the availability of metallic Cu as well as the Cu-FeO x interfaces, leading to decreased reactivity. These findings provide a direction to promote the copper-iron catalysts by creating more metal-metal oxide interfacial sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Microstructural and physicochemical origins of electroless copper deposition on graphite enhanced by acid pretreatment

We report Acid treatment is the most widely used surface modification method for enhancing the electroless metal deposition (EMD) on carbon reinforcement materials (CRMs) for metal matrix nanocomposites. However, specific microstructural and physicochemical origins of the enhanced EMD on carbon surfaces by acid treatments have been rarely studied. Here, we investigated the effects of the nitric acid treatment on graphite, a prototypical combination of acid treatment and CRM, on the fidelity of Cu EMD and their structural and chemical origins. Complementary materials characterizations and density functional theory calculations revealed the acid-induced formation of broken C–C/C=C graphitic bonds and resulting surface micropores on graphite; this enabled a uniform dispersion of catalytic Sn/Pd nanoparticles during pre-EMD sensitization/activation processes via spontaneous binding of Sn and Pd ions and, consequently, a much more uniform Cu layer EMD compared to the untreated graphite. We proposed a general mechanism illustrating how the acid-induced microstructural and chemical modifications of carbon surface affected the spatial uniformity of catalytic metal reduction during EMD and, finally, the quality of deposited metal layer. The results clearly reveal the origins of the enhanced EMD on carbon materials by acid treatments, providing guidelines for optimizing EMD on general CRMs for high-performance metal matrix nanocomposites.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Assessing the roles of Cu- and Ag-deficient layers in chalcopyrite-based solar cells through first principles calculations

Chalcopyrites are a demonstrated material platform for realizing efficient thin-film photovoltaics, with the most well known Cu(In,Ga)Se 2 (CIGS)-based solar cells exceeding 23%. Several factors, including flexibility in tuning the absorber bandgap, enhanced surface treatments, and the electrically benign nature of common defects are responsible for the existing high performance and future promise in chalcopyrite-based photovoltaic devices. The introduction of Cu-poor phases (also known as ordered-vacancy compounds or OVCs) between the absorber and buffer layers in CIGS solar cells is known to enhance device performance; however, the overall properties and role of OVCs remain poorly understood. Using first principles calculations based on the density functional theory with screened hybrid functionals, here we explore the electronic structure and stability of OVCs and their band offsets with defect-free chalcopyrite layers in Cu- and Ag-based compounds (ABX 2 where A=Cu, Ag; B=In, Ga, Al; and X=S, Se). Using AB 3 X 5 and AB 5 X 8 stoichiometries as model OVC systems, we report on the variation of the bandgap with the A/B ratio and discuss the trends in other Cu- and Ag-based chalcopyrites beyond CuInSe 2 . We find that the valence and conduction bands are lower in energy in OVCs with respect to the parent ABX 2 chalcopyrite owing to a reduced p–d interaction between X and A atoms. We additionally perform device-level simulations to assess the implications of the results, finding that the valence band offsets of OVCs are favorable, while the conduction band offsets of chalcopyrites beyond CuInSe 2 -based absorbers may be detrimental in conventional solar cell device designs.

14 SOLAR ENERGY↗
DOE OSTI2022

Interfacial engineering of plasmonic nanoparticle metasurfaces

This paper reports how the interfacial engineering of plasmonic nanoparticle (NP) lattices with desired surface characteristics can control plasmon-molecule interactions for tunable nanolasing thresholds. Compared to bare Cu NP lattices, graphene-coated Cu NPs surrounded by aromatic dye molecules gain support lasing with lower thresholds and at lower dye concentrations. This lasing enhancement is attributed to favorable molecular arrangements in electromagnetic hotspots through π–π interactions between graphene and IR-140 (5,5'-dichloro-11-diphenylamine-3,3'-diethyl-10,12-ethylene-thiatricarbocyanine-perchlorate) and 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) dyes. Besides the chemical interactions mediated by few-layer graphene, nanoscale dielectric layers such as fluoropolymer and alumina can also tailor the thresholds by modifying the spatial overlap of the dye near the NP surface. Our work lays the foundation for interfacial engineering of the surface of resonator units in plasmonic metasurfaces for exquisite control of light-matter interactions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Effect of redox promoters (CeO x and CuO x ) and surface sulfates on the selective catalytic reduction (SCR) of NO with NH 3 by supported V 2 O 5 -WO 3 /TiO 2 catalysts

A series of TiO 2 -supported MO x catalysts (M=V, W, Ce, Cu and S) were investigated for their SCR activity. In situ Raman spectroscopy indicated that the supported MO x phases were completely dispersed as surface sites on the TiO 2 support. In situ IR revealed that surface VO x , WO x and SO x sites anchored at both CeO x /CuO x and TiO 2 sites. The number of surface Lewis acid sites decreased with the addition of basic (CeO x /CuO x ) and acidic (VO x /WO x ) sites in all catalysts, and acidic SO x in the unpromoted and Ce-promoted catalysts. The surface VO x , WO x and SO x sites introduced surface Brønsted acid sites. The redox promoters increased the NO conversion, but SO x impregnation inhibited their effect due to acid (SO x )-base (CeO x /CuO x ) interactions. Finally, the SCR reaction was shown to efficiently proceed via either surface NH 3 * or NH 4 +* species, resolving the long-standing dispute on the involvement of these species in the SCR reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Theoretical Investigation of the Adsorbate and Potential–Induced Stability of Cu Facets During Electrochemical CO 2 and CO Reduction

The activity and product selectivity of electrocatalysts for reactions like the carbon dioxide reduction reaction (CO 2 RR) are intimately dependent on the catalyst's structure and composition. While engineering catalytic surfaces can improve performance, discovering the key sets of rational design principles remains challenging due to limitations in modeling catalyst stability under operating conditions. Herein, we perform first-principles density functional calculations adopting implicit solvation methods with potential control to study the influence of adsorbates and applied potential on the stability of different facets of model Cu electrocatalysts. Using coverage dependencies extracted from microkinetic models, we describe an approach for calculating potential and adsorbate-dependent contributions to surface energies under reaction conditions, where Wulff constructions are used to understand the morphological evolution of Cu electrocatalysts under CO 2 RR conditions. Here we identify that CO*, a key reaction intermediate, exhibits higher kinetically and thermodynamically accessible coverages on (100) relative to (111) facets, which can translate into an increased relative stabilization of the (100) facet during CO 2 RR. Our results support the known tendency for increased (111) faceting of Cu nanoparticles under more reducing conditions and that the relative increase in (100) faceting observed under CO 2 RR conditions is likely attributed to differences in CO* coverage between these facets.

30 DIRECT ENERGY CONVERSION↗