Search NASA⌕ Search

SEARCH · Search NASA

Results for “DECOUPLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Controls design with crossfeeds for hovering rotorcraft using quantitative feedback theory

This work is extending the research accomplished on project NCC2-751. A newly implemented helicopter model has been used to simulate 25 flight configurations near hover for the UH-60 RASCAL aircraft. A new engine model has been installed in the FORECAST simulation (alias UMGENHEL) for the better prediction of the yaw and heave responses. By applying the decoupling metric from project NCC 751 it was determined that the aileron to pitch and the elevator to yaw responses do not indicate the need for crossfeeds since both of them have a decoupling metric value over 20 dB (less than 10 percent coupling). In the case of the aileron to heave and the elevator to heave responses, the large size and the overlapping of the templates indicate that a low-order dynamic crossfeed cannot be found. The low-order dynamic crossfeed selection is proceeding, however, for the remaining eight crossfeeds. Note that most of them have successfully decoupled the system by 20 dB or more, except for the rudder to heave crossfeed (18.2 dB). It is probable that the engine model needs more accuracy to further improve the heave to yaw crossfeed decoupling metric value. To see how the new low-order dynamic crossfeeds perform, a simulation was accomplished using MATLAB SIMULINK.

Biezad, Daniel J.↗
DOE OSTI2023

Heterogeneity or illusion? Track the carbon Kuznets curve of global residential building operations

Residential buildings, the “last mile” sector in the global decarbonization, have become the most significant uncertain factor hindering carbon neutrality with increasing household energy demand. To track the operational carbon in buildings, this study investigates the carbon Kuznets curve (CKC) and the corresponding decoupling status of residential building operations at four emission scales by using the data of 30 countries from 2000 to 2019. The results show that (1) the CKC model can fit more than half of the samples. Most curves have an inverted U-shape, with 76% of emission per household and 82% of total emissions. (2) In the presence of the CKC, over four-fifths of global residential buildings peak regardless of any emission scale. The analysis denotes that the carbon emissions of developed countries reach their peaks earlier. In the total emissions, the samples’ peaking proportion is 20% and 25% with income per capita < 20,000 United States dollars (USD) and 20,000–40,000 USD, respectively. (3) The Tapio decoupling analysis and the threshold regression effectively verify the robustness and the heterogeneity of CKCs, respectively. Strong decoupling effects of CKCs in most countries are demonstrated at the scales of emission per floor space and the total emissions, and the heterogeneity proves the classic inverted U-shaped relationship between economy and emissions doesn’t exist in all emitters. Overall, this study tracks the historical carbon emission trajectories of residential building operations at a global scale, providing reference for different economies to simulate the dynamic of building carbon emissions along with the economic booming.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Light Dark Matter from Entropy Dilution

We show that a thermal relic which decouples from the standard model (SM) plasma while relativistic can be a viable dark matter (DM) candidate, if the decoupling is followed by a period of entropy dilution that heats up the SM, but not the dark sector. Such diluted hot relics can be as light as few keV, while accounting for the entirety of the DM, and not conflicting with cosmological and astrophysical measurements. The requisite dilution can be achieved via decays of a heavy state that dominates the energy budget of the universe in the early matter dominated era. The heavy state decays into the SM particles, heats up the SM plasma, and dilutes the hidden sector. The interaction required to equilibrate the two sectors in the early universe places a bound on the maximum possible dilution as a function of the decoupling temperature. As an example of diluted hot relic DM we consider a light Dirac fermion with a heavy dark photon mediator. We present constraints on the model from terrestrial experiments (current and future), astrophysics, and cosmology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

The gravitational index of 5d black holes and black strings

The supersymmetric index of 5d black strings and spinning black holes in M-theory is related to that of 4d black holes in type IIA supergravity when both theories are compactified on the same Calabi-Yau threefold. We find the finite-temperature saddles for the 5d gravitational supersymmetric index by uplifting the recently found attractor saddles of the corresponding 4d index. We study uplifts for two types of geometries: 5d black holes and 5d black strings. For 5d black holes, the uplift guarantees that the index of 4d and 5d black holes match. For 5d black strings, the saddle reproduces the microscopic index at leading order in G N , even without the conventional decoupling limit taken in AdS/CFT. In particular, when the temperature is set to be finite in the 5d flat space region, the black string index is computed from an asymptotically flat solution where the AdS throat is absent. Further, as the temperature is lowered and eventually becomes infinitesimally small in the flat space region, the solution admits a novel decoupling limit in which the AdS 3 throat takes the form of a finite-temperature BTZ black hole that is known to compute the index in AdS 3 /CFT 2 . This represents the first step towards understanding holography for supersymmetric observables in flat space, away from the decoupling limit.

AdS-CFT correspondence↗
DOE OSTI2018

Heavy Higgs boson decays in the alignment limit of the 2HDM

The Standard Model (SM)-like couplings of the observed Higgs boson impose strong constraints on the structure of any extended Higgs sector. We consider the theoretical properties and the phenomenological implications of a generic two Higgs doublet model (2HDM). This model constitutes a simple and attractive extension of the SM that is consistent with the observation of the SM-like Higgs boson and precision electroweak observables, while providing a potential new source of CP-violation. In this paper we focus on the so-called Higgs alignment limit of the generic 2HDM, where the neutral scalar field H 1 , with the tree-level couplings of the SM Higgs boson, is a mass eigenstate that is aligned in field space with the direction of the Higgs vacuum expectation value. Tihe properties of the two other heavier neutral Higgs scalars, H 2 and H 3 , in the alignment limit of the 2HDM are also elucidated. It is shown that the couplings of H 2 and H 3 in the alignment limit are tightly constrained and correlated. For example, in the exact alignment limit at tree level, for bosonic final states BR( H 2,3 → W + W - , ZZ, H 1 Z ) = 0 and BR( H ± → W ± H 1 ) = 0, whereas for fermionic final states Γ( H 2 → ff ¯) / Γ( H 3 → ff ¯) ~ M 2 /M 3 (where M α is the mass of H α ). In some cases, the results of the alignment limit differ depending on whether or not alignment is achieved via the decoupling of heavy scalar states. In particular, in the exact alignment limit without decoupling BR( H 2,3 → H 1 H 1 ) = 0, whereas these branching ratios are nonzero in the decoupling regime. Observables that could be used to test the alignment scenario at the LHC are defined and discussed. The couplings of the Higgs bosons away from their exact alignment values are determined to leading order, and some consequences are elucidated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Solid-State, Single-Ion Conducting, Polymer Blend Electrolytes with Enhanced Li + Conduction, Electrochemical Stability, and Limiting Current Density

The development of solid-state polymer electrolytes with high lithium conductivity is crucial to improve lithium-ion battery performance and ameliorate the safety challenges associated with current solvent-based electrolytes. Unfortunately, sluggish polymer segmental dynamics are known to constrain conductivity enhancements in solid-state polymer electrolyte systems, limiting overall performance. In this work, a glassy single-ion-conducting polymer, poly[lithium sulfonyl(trifluoromethane sulfonyl)imide methacrylate] (PLiMTFSI), was blended with a flexible polymer, poly(oligo-oxyethylene methyl ether methacrylate) (POEM), and the impact of PLiMTFSI molecular weight and ion concentration on the thermal and ion-conducting behavior of blend electrolytes was investigated. High ionic conductivities approaching 1 × 10 -2 S/cm at 150 °C were realized in this polymer blend electrolyte system as a result of decoupling Li + transport from polymer segmental dynamics. The decoupled ion transport was attributed to the packing frustration of the glassy PLiMTFSI – sufficient percolating free volume was generated to produce effective ion diffusion pathways. This decoupling was tunable as the ion transport could be altered from being closely coupled to the polymer segmental dynamics (Vogel–Tammann–Fulcher-like) to hopping (Arrhenius-like) by increasing the PLiMTFSI molecular weight and ion concentration. Moreover, the immobilized TFSI anion resulted in high Li + selectivity (Li + transference number = 0.9), high electrochemical stability (up to 4.7 V against Li + / Li), and limiting current density of 1.8 mA/cm 2 (electrolyte thickness = 0.05 cm). These features suggest that this single-ion-conducting, polymer blend electrolyte might be a promising alternative to a benchmark system – salt-doped polyethylene oxide. Moreover, the above characteristics can support the battery operation at higher voltages using energy-dense Li metal anodes, with faster charging rates and enhanced energy/power densities. Altogether, the results suggest that polymer chain packing frustration can be exploited to overcome the constraints of slow polymer segmental relaxations to achieve rapid and highly selective ion transport and enhanced performance in solid-state polymer electrolytes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A second order yield-temperature relation for accurate inference of burn-averaged quantities in multi-species plasmas

Measured yields and ion temperatures inferred from the fusion product energy spectra can be used as metrics for the performance of an ICF implosion. This can be used to infer species separation, thermal decoupling, flows, or other effects that can cause the inferred ion temperatures to deviate from the true underlying thermal temperature and the yield ratio to deviate from the expected value. Direct inference of the impact of these effects on observed temperatures and yields can be difficult to uncover due to the underlying dependence on the shape and time evolution of the temperature and density profiles of the fusing plasma. Due to differences in the temperature dependence of the reactivities, different fusion products are emitted from different regions and times within the implosion. In order to properly account for this, a second-order analytical expression relating the apparent temperatures and yield ratios is developed. This expression can be coupled to models of yield and/or temperature altering effects to infer their burn-averaged impact on an implosion. The second-order expression shows significant improvement over lower-order expressions in synthetic data studies. Demonstrations of its applications to synthetic data coupled with models of ion thermal decoupling and radial flows are presented. In the case of thermal decoupling, both first and second-order expressions show reasonable levels of accuracy. To consistently infer the amplitude of radial flow with a <10% error, the second-order equation is required.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Molecular dynamics based study on the effects of cation size on the local structure and diffusion in polymerized ionic liquids

We have used coarse-grained molecular dynamics simulations to understand the effect of cation size on ion diffusion in polymerized ionic liquids at temperatures well above the glass transition temperature of the polymers. We investigated dependencies of the diffusion constant on the cation radius and static dielectric constant and interpreted these results in terms of underlying structural changes, and decoupling phenomenon. We have found non-monotonic effects of the cation radius on the diffusion constant, with a maximum at an intermediate radius resulting from two different size dependent effects. Changes in the radial distribution functions characterizing spatial distribution of cations with respect to anions result in a monotonic increase in the coordination number. This yields an increase in the effective interaction energy as a function of cation radius, which can explain the decrease in the diffusion constant. This increase is counteracted at small cation radii by a corresponding increase in decoupling of cation and anion dynamics. In addition, the diffusion constant is found to increase on increasing the static dielectric constant for all radii of the cations. These results highlight the significant role of decoupling in designing polymerized ionic liquids with an enhanced diffusion constant of cations.

Gillespie, Colin [ORNL] (ORCID:0000000320287080)↗
DOE OSTI2018

Neutron poison burnout and effects on SNS moderator performance

Detailed neutron absorber burnup calculations were performed for the poison plate and decoupler layers of the decoupled ambient water and liquid hydrogen moderators of SNS. Although local poison burnout was identified for the water moderator at 32 GWh and local decoupler burnout was becomes apparent at the hydrogen moderator at 37 GWh delivered proton beam energy, both moderators see major impacts to the moderator performance by increases of pulse widths and spectral changes only past the stated burnout energies.

Gallmeier, Franz X.↗
DOE OSTI2026

MATEY: multiscale adaptive transformer models for spatiotemporal physical systems

Accurate representation of the multiscale features in spatiotemporal physical systems using vision transformer architectures requires extremely long, computationally prohibitive token sequences. To address this issue, we propose two novel adaptive tokenization schemes that dynamically adjust patch sizes based on local features: one ensures convergent behavior to uniform patch refinement, while the other offers better computational efficiency. Moreover, we present a set of spatiotemporal attention schemes, where the temporal or axial spatial dimensions are decoupled, to evaluate their baseline computational and data efficiencies and to determine whether adaptive tokenization can improve this performance. We assess the performance of the proposed multiscale adaptive model, MATEY, in a sequence of experiments. Compared to a full spatiotemporal attention scheme or a scheme that decouples only the temporal dimension, we find that fully decoupled axial attention is less efficient and expressive, requiring more training time and model parameters to achieve the same accuracy. The experiments on the adaptive tokenization schemes show that, compared to a uniformly refined model, the proposed schemes achieve comparable or improved accuracy at a much lower cost in the tested two-dimensional settings. While the asymptotic analysis suggests the potential for favorable scaling, empirical validation at substantially longer sequence lengths remains to be performed in future work. Finally, we demonstrate in two fine-tuning tasks featuring different physics that models pretrained on PDEBench data outperform the ones trained from scratch, especially in the low data regime with frozen attention.

adaptive tokenization↗
DOE OSTI2023

Confronting interacting dark radiation scenarios with cosmological data

Dark radiation (DR) is generally predicted in new physics scenarios that address fundamental puzzles of the Standard Model or tensions in the cosmological data. Cosmological data have the sensitivity to constrain not only the energy density of DR but also whether it is interacting. In this paper, we present a systematic study of five types of interacting DR (free-streaming, fluid, decoupling, instantaneous decoupling, and recoupling DR) and their impact on cosmological observables. We modify the Boltzmann hierarchy to describe all these types of interacting DR under the relaxation time approximation. We, for the first time, robustly calculate the collision terms for recoupling scalar DR and provide a better estimation of the recoupling transition redshift. We demonstrate the distinct features of each type of DR on the cosmic microwave background and matter power spectra. We perform Markov-chain Monte Carlo scans using the Planck 2018 data and baryon acoustic oscillation data. Assuming no new physics in the standard model neutrino sector, we find no statistically significant constraints on the couplings of DR, although there is a slight preference for the fluidlike limit of all the cases. In the case of instantaneous decoupling DR, this limit corresponds to a late transition redshift around recombination. Furthermore, the ΔN eff constraint varies marginally depending on the type of DR.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Developing a Reduced 240-Bus WECC Dynamic Model for Frequency Response Study of High Renewable Integration

The ongoing changes in the generation resource mix, driven by the rapid adoption of inverter-based resources (IBR) as well as the early retirement of synchronous generators, are bringing new challenges to the planning and operation of bulk electric power systems. Consequently, there is an increasing need to understand, design, and quantify the reliability service provision from IBRs by performing integrated scheduling and dynamic simulations. However, test systems that have consistent scheduling and dynamic models rarely exist largely because of the decoupled nature of the two simulations on a synchronous generator-dominated system. This paper develops the dynamic model of a reduced Western Electricity Coordinating Council (WECC) system. In conjunction with the existing scheduling model, it is suitable for integrating scheduling and dynamic simulations. The reduced 240-bus WECC model reflects the generation resource mix of the Western Interconnection as of 2018. Moreover, the developed dynamic model is validated against field frequency events measured by FNET/GridEye and preserves the dominant inter-area oscillation mode in WECC.

dynamic simulation↗
DOE OSTI2020

An Integrated Indexing and Search Service for Distributed File Systems

Data services such as search, discovery, and management in scalable distributed environments have traditionally been decoupled from the underlying file systems, and are often deployed using external databases and indexing services. However, modern data production rates, looming data movement costs, and the lack of metadata, entail revisiting the decoupled file system-data services design philosophy. In this article, we present TagIt, a scalable data management service framework aimed at scientific datasets, which can be integrated into prevalent distributed file system architectures. A key feature of TagIt is a scalable, distributed metadata indexing framework, which facilitates a flexible tagging capability to support data discovery. Furthermore, the tags can also be associated with an active operator, for pre-processing, filtering, or automatic metadata extraction, which we seamlessly offload to file servers in a load-aware fashion. We have integrated TagIt into two popular distributed file systems, i.e., GlusterFS and CephFS. Our evaluation demonstrates that TagIt can expedite data search operation by up to 10× over the extant decoupled approach.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Lu-Hf and Sm-Nd geochronological constraints on the influence of subduction metamorphism in controlling the Hf-Nd terrestrial array: Evidence from the world’s orogenic belts

To create a better understanding of the influence of subduction metamorphism on the Hf-Nd terrestrial array, this study examines all of the available Lu-Hf and Sm-Nd garnet isochron ages from the world’s orogenic eclogites and amphi bolites. The garnet isochron y-intercept values provide a record of each sample’s epsilon Hf ( ε Hf) and Nd ( ε Nd) at the age recorded by the isochron, which in the case of most orogenic eclogites and amphibolites is the time of prograde metamorphism during subduction. It is further possible to assess the extent to which each sample’s Lu-Hf and Sm-Nd isotope systematics have remained undisturbed since the date recorded by the isochron by comparison of the bulk-rock isotope systematics with the isochron initial value. This approach provides a means of understanding the Lu-Hf and Sm-Nd systematics of post-subduction metamorphic oceanic crust. On a global scale, the coupled Lu-Hf and Sm-Nd isotope systematics of this crust closely align with the Hf-Nd terrestrial array and have average 176 Lu/ 177 Hf and 147 Sm/ 144 Nd ratios within error of the chondritic uniform reservoir values. This is an important finding because it suggests that a reservoir of deeply subducted oceanic crust, possibly residing at the core-mantle boundary, is unlikely to be significantly fractionated from the Hf-Nd terrestrial array. In contrast to the samples of subduction-metamorphosed oceanic crust, metamorphic rocks with a continental crustal protolith demonstrate garnet isochron initial values and bulk-rock Lu-Hf and Sm-Nd isotope systematics indicating significant decoupling from the Hf-Nd terrestrial array. However, because this material is not readily subducted, this strongly decoupled signature is unlikely to be transferred into deep Earth. Mixing calculations aimed at developing a clearer understanding of what factors control decoupling of a sample’s Lu-Hf and Sm-Nd systematics from the Hf-Nd terrestrial array highlight the complexity of mass-transfer regimes operating in the subduction environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The Roles of Westward-Propagating Waves and the QBO in Limiting MJO Propagation

Abstract A recent study categorized the Madden–Julian oscillation (MJO) during boreal winter season into four types called stand, jump, slow, and fast MJO. This study focuses on the stand and jump MJO. Based on whether their convection penetrates the Maritime Continent (MC), stand and jump MJOs are seen as non-penetrating (NP) MJOs, while the other two are seen as eastward-penetrating (EP) MJOs. Results reveal the relative roles of the westward-propagating wave (WPW), as well as the QBO and ENSO, in limiting MJO propagation. Lack of the premoistening over the southern sea surface of the MC stops NP MJO from penetrating the MC. The active convection of the WPWs hinders the descending branch of the NP MJO circulation and therefore leads to the insufficient meridional advective moistening over the southern sea surface of the MC. The independent convection over the Pacific for jump MJOs is influenced by a combined effect of the QBO and ENSO. The tropopause instability induced by the MJO is found to significantly decouple from its convection over the Pacific in westerly QBO (QBOW) winters more than in easterly QBO (QBOE) winters. For jump MJOs, the independent convection over the central Pacific comes from local WPWs whose amplification and further development into deep convection are correlated to jump the MJOs’ decoupled tropopause instability. For stand MJOs, however, the seasonal-mean La Niña–like cool SST anomalies weaken the WPW activity over the central Pacific and confine WPWs within the western Pacific. Therefore, the decoupled tropopause instability of stand MJOs is out phase of WPWs and fails to induce an independent convection over the central Pacific.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Lagrangian Evolution of the Northeast Pacific Marine Boundary Layer Structure and Cloud during CSET

Flight data from the Cloud System Evolution over the Trades (CSET) campaign over the Pacific stratocumulus-to-cumulus transition are organized into 18 Lagrangian cases suitable for study and future modeling, made possible by the use of a track-and-resample flight strategy. Analysis of these cases shows that 2-day Lagrangian coherence of long-lived species (CO and O 3 ) is high ($r$ = 0.93 and 0.73, respectively), but that of subcloud aerosol, MBL depth, and cloud properties is limited. Although they span a wide range in meteorological conditions, most sampled air masses show a clear transition when considering 2-day changes in cloudiness (−31% averaged over all cases), MBL depth (+560 m), estimated inversion strength (EIS; −2.2 K), and decoupling, agreeing with previous satellite studies and theory. Changes in precipitation and droplet number were less consistent. The aircraft-based analysis is augmented by geostationary satellite retrievals and reanalysis data along Lagrangian trajectories between aircraft sampling times, documenting the evolution of cloud fraction, cloud droplet number concentration, EIS, and MBL depth. An expanded trajectory set spanning the summer of 2015 is used to show that the CSET-sampled air masses were representative of the season, with respect to EIS and cloud fraction. Two Lagrangian case studies attractive for future modeling are presented with aircraft and satellite data. The first features a clear Sc–Cu transition involving MBL deepening and decoupling with decreasing cloud fraction, and the second undergoes a much slower cloud evolution despite a greater initial depth and decoupling state. Finally, potential causes for the differences in evolution are explored, including free-tropospheric humidity, subsidence, surface fluxes, and microphysics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A Multidisciplinary Approach to Integrated Energy Systems: Advanced Nuclear Plants with Thermal Storage for Dynamic and Flexible Operation in Diverse Markets

Energy supply, distribution, and demand are continuously evolving in accordance with the integration of new power generation sources. In the United States, there is a progressive shift toward incorporating fluctuating energy sources such as wind and solar into the energy mix, alongside the distributed generation. Simultaneously, we are seeing a revolution in consumer technologies such as electric vehicles, energy devices for both residential and commercial use, and industrial processes—all contributing to a fundamental change in energy consumption dynamics. These scenarios have led to huge demand for enhanced flexibility from nuclear power plants (NPPs), requiring them to operate with unprecedented adaptability. Furthermore, advanced NPPs (A-NPPs) could potentially apply to scenarios in which power generation flexibility is prioritized over its current and conventional baseload generation capacity for traditional demand patterns. The present work covers several configurations for coupling nuclear energy production with thermal energy storage (TES). Previous work evaluated systems entailing a simple nuclear-TES configuration that used steam as a heat source for the TES of three different advanced reactors (ARs), but its heat diversion ratio (HDR) for charging was limited. The present work proposes a new configuration that features full decoupling of the nuclear reactor and the power cycle, using reactor coolant (i.e., gas) as a heat source for the TES and offering a theoretically unlimited HDR. This configuration is, however, more complex, as both high- and low-temperature TES (HT-TES and LT-TES) systems are required in order to cover the extended temperature range. Although this configuration imposes certain limitations on the discharge system configuration, it also presents the opportunity to design a more efficient system. For this case in particular, a steam reheat cycle is advantageous. Conventional TES systems take advantage of nominal efficiency when discharging, whereas the reheat cycle in the fully decoupled TES system affords a significant efficiency increase over conventional cases. Material selection, component/equipment sizing, and costing analyses were performed, followed by economic dispatch and size optimization. Dynamic models were developed for the decoupled system in order to generate insights into aspects of off design operation (e.g., drops in cycle efficiency), and these models enable exploration of potential mitigation strategies for addressing such drops. The models also highlight the need to design fail-safes that ensure continuous operational stability and minimize the impact of power ramping on the reactor parameters.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Scaling of Turbulent Viscosity and Resistivity: Extracting a Scale-dependent Turbulent Magnetic Prandtl Number

Turbulent viscosity νt and resistivity ηt are perhaps the simplest models for turbulent transport of angular momentum and magnetic fields, respectively. The associated turbulent magnetic Prandtl number Pr t ≡ ν t /η t has been well recognized to determine the final magnetic configuration of accretion disks. Here, we present an approach to determining these "effective transport" coefficients acting at different length scales using coarse-graining and recent results on decoupled kinetic and magnetic energy cascades. By analyzing the kinetic and magnetic energy cascades from a suite of high-resolution simulations, we show that our definitions of ν t , η t , and Pr t have power-law scalings in the "decoupled range." We observe that Pr t ≈ 1–2 at the smallest inertial-inductive scales, increasing to ≈5 at the largest scales. Furthermore, based on physical considerations, our analysis suggests that Pr t has to become scale independent and of order unity in the decoupled range at sufficiently high Reynolds numbers (or grid resolution) and that the power-law scaling exponents of velocity and magnetic spectra become equal. In addition to implications for astrophysical systems, the scale-dependent turbulent transport coefficients offer a guide for large-eddy simulation modeling.

79 ASTRONOMY AND ASTROPHYSICS↗