Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distillates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Sol-gel reaction stability studied: Influence in the formation temperature and properties of ferroelectric thin films

Lead zirconium titanate (PZT) sol-gel solutions were prepared based on distilled lead acetate precursor solutions. A detailed analysis of the distillation effect on the lead precursor and the final PZT solution were carried out by Infrared and Raman techniques. It was found that the increase in the number of distillation steps experienced by the lead precursor solutions removes the constitutional water and increases the lead acetate-2-methoxyethanol interconnectivity; thus improving stability and avoiding the aging effect of the resulting PZT solutions. The thermal decomposition process of the PZT solutions was analyzed based on the thermogravimetric (TG) and differential thermogravimetric analysis (DTA) measurements. It was found that as the number of distillation steps in the lead precursor solutions increases, the decomposition rate increases and the formation temperature of pure perovskite PZT films decreases. X-ray diffraction (XRD) technique was used to study the film phase formation. A pure perovskite phase at 500 deg. C was found by the XRD analysis after the second distillation step. Scanning electron microscope technique was used to carry out the microstructural analysis. Dense microstructure was found in all analyzed films and an incipient columnar grain growth was revealed in PZT films prepared based on lead precursor solution with more than three distillation steps. The dependence of the dielectric, ferroelectric and piezoelectric properties on the number of distillation steps was revealed and a correlation between the distillation process, film microstructure properties and electrical performance was established.

36 MATERIALS SCIENCE↗

Advancing the Renewable Industry in Minnesota

This report deals with seven topics: 1. "Utilizing Ash Wastes as a Nutrient Source for Corn": As forms of gasification and combustion grow in the area of renewable energy in Minnesota the question arises regarding the utilization/application of the ash co product produced from these processes. Currently there are four facilities in Minnesota producing an ash co product (three ethanol facilities and one combusting biomass to produce energy). These ash wastes are generated from using ethanol by-products as a fuel or heating source for fermentation. Other ash wastes from agricultural sources include turkey litter ash. When applied to agricultural fields, ash wastes can be a source of nutrients for agricultural crops. Chemical analyses of ash wastes vary, but 200 to 300 lb of P 2 O 5 and K 2 O per ton of ash is typical. The value of ash wastes as a fertilizer has increased because commercial fertilizer prices have increased significantly over the last few years. Specifically: Compaction/Agglomeration research- Research included development of an appropriate product for use in current delivery systems by densifying the ash into the form of pellets or briquettes which may reduce fertilizer input cost to farmers. The initiative addresses the use of phosphorus and potassium from co-firing or gasification processes as a fertilizer source. 2. "Use of Glycerol as a Corn Replacement in Calf Starter Diets": Glycerol is a sugar alcohol by-product of bio-diesel production. About 1 gallon of glycerin is produced for every 10 gallons of bio-diesel of which the glycerol content may vary between 63 and almost 100%. There is some uncertainty of the exact energy value of glycerol as an ingredient for animal feed but it has been successfully used as a replacement for corn up to 10% of the diet dry matter for lactating dairy cows. There is a lack of information on incorporating glycerol into diets for pre- and post weaned dairy heifer calves which has the potential to expand the market for this by product. Preliminary work at SROC indicates that there are no palatability problems using glycerol up to 6% of the mix in post weaning pellets for group fed dairy heifers. 3. "Intervention Strategies for Reduction of Food-borne Pathogens in Cattle Fed Ethanol Byproducts": Ethanol plants and cattle producers create a symbiotic relationship: The use of wet and dry distiller’s grains in beef cattle rations provides significant improvement in overall feedlot performance for many producers in Minnesota and the Upper Midwest. Distiller’s grain is the coproduct that remains following the distillation of ethanol. It may be dehydrated to produce dried distiller’s grain (DDG) which is then commonly used as livestock feed. The use of distiller’s grains in livestock rations has been the subject of numerous research projects over the past ten years. Recently published research data conducted at Kansas State University (K-State) has created controversy over the feeding of distiller’s grains in beef cattle rations. The research indicates that cattle fed distiller’s grain may have an increased probability of Escherichia coli O157 in their hindgut. Specifically: This research assessment was a two part project consisting of feeding trials conducted at the University of Minnesota and an intervention study conducted at Kansas State University. This report is the Kansas State University portion. This report is a task-level final technical report. 4. "Impact of Distillers' Grains and Glycerin on Cattle Fecal Shedding of Escherichia coli O157:H7" 5. "Study Assessing the Opportunities and Potential of Soybean Based Products and Technologies": Based on demand/market potential, economic feasibility, stage of development and strength of institutional support, Informa Economics, Inc. ("Informa") narrowed down a list of more than 100 emerging soybean products and to 8 of the most promising for soybean, considered to have the greatest potential to add significant value to Minnesota's soybean commodity production. However, as with the potential of any biobased product or technology, the development of these emerging soybean products and technologies will be heavily reliant on future market price environments (especially for petroleum) and government policies. This report identifies what the contractor believes are the top 8 products and technologies for soybeans at the time of publishing. 6. "Study Assessing the Opportunities and Potential of Corn-Based Products and Technologies": Based on demand/market potential, economic feasibility, stage of development and strength of institutional support, Informa Economics, Inc. ("Informa") narrowed down a list of more than 100 emerging corn products and technologies to 8 of the most promising for corn, considered to have the greatest potential to add significant value to Minnesota's corn commodity production. However, as with the potential of any biobased product or technology, the development of these emerging corn products and technologies will be heavily reliant on future market price environments (especially for petroleum) and government policies. This report identifies what the contractor believes are the top 8 products and technologies for corn at the time of publishing. 7. "Distributed Power Generation Technology (Roseau Gasification)."

09 BIOMASS FUELS↗

Development Of Sustainable Biobased Products And Bioenergy In Cooperation With The Midwest Consortium For Sustainable Biobased Products And Energy

Collaborative efforts of Midwest Consortium have been put forth to add value to distiller's grains by further processing them into fermentable sugars, ethanol, and a protein rich co-product consistent with a pathway to a biorenewables industry (Schell et al, 2008). These studies were recently published in the enclosed special edition (Volume 99, Issue 12) of Bioresource Technology journal. Part of them have demonstrated the utilization of distillers grains as additional feedstock for increased ethanol production in the current dry grind process (Kim et al., 2008a, b; Dien et al.,2008, Ladisch et al., 2008a, b). Results showed that both liquid hot water (LHW) pretreatment and ammonia fiber expansion (AFEX) were effective for enhancing digestibility of distiller's grains. Enzymatic digestion of distiller's grains resulted in more than 90% glucose yield under standard assay conditions, although the yield tends to drop as the concentration of dry solids increases. Simulated process mass balances estimated that hydrolysis and fermentation of distillers grains can increase the ethanol yield by 14% in the current dry milling process (Kim et al., 2008c). Resulting co-products from the modified process are richer in protein and oil contents than conventional distiller's grains, as determined both experimentally and computationally. Other research topics in the special edition include water solubilization of DDGS by transesterification reaction with phosphite esters (Oshel el al., 2008) to improve reactivity of the DDGS to enzymes, hydrolysis of soluble oligomers derived from DDGS using functionalized mesoporous solid catalysts (Bootsma et al., 2008), and ABE (acetone, butanol, ethanol) production from DDGS by solventogenic Clostridia (Ezeji and Blaschek, 2008). Economic analysis of a modified dry milling process, where the fiber and residual starch is extracted and fermented to produce more ethanol from the distillers grains while producing highly concentrated protein co-product, has shown that the process is economically viable resulting in an increase in net present value (Perkis et al., 2008). According to the study, the revenue is expected to increase further with improved amino acid profile of the protein rich co-products and lower cost of cellulase enzyme mixture. Also, Kim and Dale (2008) discuss using life cycle analysis to enhance the environmental performance of the corn based ethanol. On the second phase of the research, concerted efforts were directed on assessing compositional variability of dry milling co-products collected from 4 different dry grind ethanol plants has been measured and its effect on enzymatic digestibility and fermentability. Fermentation utilized a recombinant glucose/xylose co-fermenting yeast (Saccharomyces cerevisiae 424A (LNH-ST)). No significant compositional variability among the samples was found. Simultaneous saccharification and glucose/xylose co-fermentation of the pretreated distillers grains at solids and cellulase loadings of 150 g dry solids per liter and 6.4 mg protein per g dry substrate, respectively, yielded 74-801% of theoretical maximum ethanol concentration using recombinant Saccharomyces cerevisiae 424A (LNH-ST). The paper summarizing the results from the second phase of the Midwest Consortium is currently submitted to Bioresource Technology journal. The copy of the paper submitted is enclosed.

09 BIOMASS FUELS↗

Methods for separating components

Method for concentrating components through a distillation column are disclosed. A process stream is provided containing hydrocarbons, carbon dioxide, and water. The process stream is passed into the distillation column at a bottom portion of the distillation column. The process stream is fractionally distilled in the distillation column, forming an overhead vapor stream, a middle fluid stream, and a bottoms liquid stream. The middle fluid stream is removed from a middle location of the distillation column. The bottoms liquid stream is removed from the distillation column. The overhead vapor stream is removed from the distillation column. The middle fluid stream consists of a first portion of the carbon dioxide and a first portion of the hydrocarbons. The bottoms liquid stream consists of a second portion of the hydrocarbons as a first phase and substantially all the water as a second phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superhydrophobic coated micro-porous carbon foam membrane and method for solar-thermal driven desalination

A solar membrane distillation apparatus includes a housing comprising a light transmitting wall. A solar distillation membrane is positioned in the housing to receive solar radiation transmitted through the light transmitting wall. The solar distillation membrane includes a porous graphitic foam and a coating of a hydrophobic composition on the surface and pores of the graphitic foam. A water chamber within the housing is provided for retaining water adjacent to the solar distillation membrane. A vapor chamber is provided for collecting water vapor distilling through the solar distillation membrane. A condenser is provided for condensing distilled water vapor from the vapor chamber into liquid water. A separation membrane and a method of solar distillation are also disclosed.

Jang, Gyoung Gug↗

Thermal desalination via supercritical CO 2 Brayton cycle: Optimal system design and techno-economic analysis without reduction in cycle efficiency

The supercritical carbon dioxide (sCO 2 ) Brayton cycle is an upcoming power cycle potentially providing higher energy efficiency and more compact turbomachinery compared to traditionally used Brayton and Rankine cycles. The heat rejected from the sCO 2 Brayton cycle is quite hot (>70 degrees C) and must be cooled before flowing back to the compressor. However, this heat is ideal for producing fresh water with a thermal desalination system. This paper focuses on integrating multi-effect distillation (MED) with the sCO 2 stream exiting the recuperator. A new methodology for integration of MED with the sCO 2 Brayton cycle is proposed for simultaneous production of power and fresh water. The distillate produced does not affect the sCO 2 cycle efficiency, i.e., distillate is produced without being a parasitic load to the power plant compared to conventional integration of MED with steam Rankine cycle. To maximize the energy recovery from the waste heat stream exiting the sCO 2 cycle, a new methodology is formulated and discussed in the Appendix. Integration of MED with a 115 MW e sCO 2 power plant (49.2% efficient) produces 2813 m3/day of distillate and the cost of distilled water is 1.1 $/m 3 . Further, to enhance the distillate production, an innovative MED configuration is proposed, and for the same cycle operating condition with an electrical output 115 MW e , the net distillate production increases by 59% to 4472 m 3 /day at 1 $/m 3 . The cost of desalinated water for the integrated system is 17.8% lower than that of a standalone reverse-osmosis plant having the same capacity. Parametric analysis is performed to calculate the optimal design parameters for the integrated MED-sCO 2 system.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

An experimental study on thermo-catalytic pyrolysis of plastic waste using a continuous pyrolyser

Highlights: • Thermo-catalytic pyrolysis of plastic waste in a bench scale continuous feed unit. • Utilizing RDC temperature profile to enhance oil product selectivity towards diesel. • Mesoporosity is a critical factor for coke deposition on catalyst. • Pelletised catalysts, not powder catalysts, provided higher selectivity towards diesel. - Abstract: A bench scale, two-stage, thermo-catalytic reactor equipped with a continuous feeding system was used to pyrolyse pure and waste plastics. Experiments using five zeolitic and clay-based catalysts of different forms (pellet and powders) and different plastic feedstocks – virgin HDPE, HDPE w1aste and mixed plastic waste (MPW) were compared to the control experiments – pyrolysis without catalyst. Results indicated that the two pelletized catalysts were the most promising for the conditions employed. Of these two, one with higher acidity and surface area was highly selective for the gasoline fraction (C{sub 5}–C{sub 11}) giving 80% from the total medium distillate conversion using virgin HDPE as feedstock. It also produced the least amount of olefins (17% for virgin HDPE, 4% for HDPE waste and 2% for MPW) and coke (<1% for virgin HDPE, 3% for HDPE waste and 5% for MPW), and the highest aromatics content (22% for virgin HDPE from un-distilled medium distillate, 5% for HDPE and 13% for MPW both from distilled medium distillate). The second pelletized catalyst exhibited high selectivity for the diesel fraction (C{sub 12}–C{sub 25}) giving 63% from the total medium distillate conversion using virgin HDPE as feedstock. The amount of coke deposited on the catalyst surface depended mainly on the mesopore volume, with less coke deposited as the mesopore volume increased. The variation in catalyst selectivity with acidity strength due to Lewis sites on the catalyst surface controls selectivity towards carbon chain length.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

In situ recovery of bio-based carboxylic acids

The economics of chemical and biological processes is often dominated by the expense of downstream product separations from dilute product streams. Continuous separation techniques, such as in situ product recovery (ISPR), are attractive in that they can concentrate products from a reactor and minimize solvent loss, thereby increasing purity and sustainability of the process. In bioprocesses, ISPR can have an additional advantage of increasing productivity by alleviating product inhibition on the microorganism. In this work, we developed a liquid–liquid extraction (LLE)-based ISPR system integrated with downstream distillation to selectively purify free carboxylic acids, which were selected as exemplary bioproducts due to their ability to be produced at industrially relevant titers and productivities. Equilibrium constants for the extraction of carboxylic acids into a phosphine-oxide based organic phase were experimentally determined. Complete recovery of acids from the extractant and recyclability of the organic phase were demonstrated through multiple extraction–distillation cycles. Using these data, an equilibrium model was developed to predict the acid loading in the organic phase as a function of the extraction equilibrium constant, initial aqueous acid concentration, pH, organic to aqueous volume ratio, and temperature. A distillation process model was then used to predict the energy input required to distill neat acid from an organic phase as a function of the acid loading in the organic phase feed. The heat integrated distillation train can achieve neat recovery of acetic acid with an energy input of 2.6 MJ kg -1 of acetic acid. This LLE-based ISPR system integrated with downstream distillation has an estimated carbon footprint of less than 0.36 kg CO 2 per kg of acetic acid, and provides a green approach to enable both new industrial bioprocesses, and process intensification of existing industrial operations by (1) increasing the productivity and titer of the bioprocess via decreasing end-product inhibition, (2) minimizing downstream separation energy input to less than 20% of the heating value of the product, and (3) generating no waste products.

09 BIOMASS FUELS↗

Depleted Argon from Underground Sources

Argon is a strong scintillator and an ideal target for Dark Matter detection; however {sup 39}Ar contamination in atmospheric argon from cosmic ray interactions limits the size of liquid argon dark matter detectors due to pile-up. Argon from deep underground is depleted in {sup 39}Ar due to the cosmic ray shielding of the earth. In Cortez, Colorado, a CO{sub 2} well has been discovered to contain approximately 600 ppm of argon as a contamination in the CO{sub 2}. We first concentrate the argon locally to 3% in an Ar, N{sub 2}, and He mixture, from the CO{sub 2} through chromatographic gas separation, and then the N{sub 2} and He will be removed by continuous distillation to purify the argon. We have collected 26 kg of argon from the CO{sub 2} facility and a cryogenic distillation column is under construction at Fermilab to further purify the argon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-Step Conversion of Ethanol to n-Butene over Ag-ZrO2/SiO2 Catalysts

Ethanol is a promising platform molecule for production of a variety of fuels and chemicals. Of particular interest is producing middle distillate fuels (i.e., jet and diesel blendstock) from renewable ethanol feedstock. State-of-the-art alcohol-to-jet technology requires multiple process steps based on catalytic dehydration of ethanol to form ethylene, followed by sometimes a multi-step oligomerization, and then hydrotreatment and distillation. Here we report on a new catalytic route in which ethanol is directly converted to n-butene (1- and 2-butene mixtures) over Ag-ZrO2/SBA-16, thus offering the potential for a reduction in the number of required processing steps versus conventional alcohol-to-jet technology. This catalyst system provides the balanced metal and Lewis acid sites required to selectively facilitate a cascading sequence of reactions that includes dehydrogenation, aldol condensation, Meerwein–Ponndorf–Verley reduction, dehydration, and hydrogenation. High conversion and selectivity toward either n-butene or 1,3-butadiene is achieved by tuning the hydrogen feed partial pressure and other process/catalyst parameters. With sufficient hydrogen partial pressure 1,3-butadiene is completely and selectively hydrogenated to form n-butene. The reaction mechanism was elucidated through operando-nuclear magnetic resonance investigations coupled with reactivity measurements. Combined experimental-computational investigation reveals how changes in silver and zirconium composition and the silver oxidation state affects reactivity under controlled hydrogen partial pressures and after prolonged run times. Finally, catalyst effectiveness also was demonstrated when using wet ethanol feed, thus highlighting process flexibility in terms of feedstock purity requirements. This work was financially supported by the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy, Bioenergy Technologies Office, and was performed at the Pacific Northwest National Laboratory (PNNL) under Contract No. DE-AC05-76RL01830 and the National Renewable Energy Laboratory under Contract No. DE-AC36- 08GO28308. Part of the work conducted by S. A. Akhade was performed under the auspices of the U.S. DOE at Lawrence Livermore National Laboratory under Contract No. DE-AC52-07NA27344. This work was partly supported through the PNNL-WSU Distinguished Graduate Research Program for ADW. NMR and XPS experiments were performed using EMSL (grid.436923.9), a DOE Office of Science User Facility sponsored by the Office of Biological and Environmental Research

Dagle, Vanessa↗

"An Economic Process for Coal Liquefaction to Liquid Fuels" SBIR Phase II -- Final Scientific/Technical Report

The current commercial processes for direct coal liquefaction utilize expensive backmix-flow reactor system and conventional catalysts resulting in incomplete and retrogressive reactions that produce low distillate liquid yield and high gas yield, with high hydrogen consumption. The new process we have developed, which uses a less expensive reactor system and highly active special catalysts, resulted in high distillate liquid yield, low gas yield and low hydrogen consumption. The new reactor system using the special catalyst can be operated smoothly for direct catalytic coal liquefaction. Due to high hydrogenation and hydrocracking activities of the special catalysts, moderate temperatures and high residence time in each stage of the reactor system resulted in high distillate yield in the C 4 -650°F range with no 650°F + product formed except for the remaining unconverted coal residue. The C 4 -650°F distillate is more valuable than the light petroleum crude. Since there is no 650°F + liquid product, simple reforming and hydrotreating of the C 4 -650°F product will produce the commercial grade light liquid fuels. There is no need for further refinement using catalytic cracking process that is currently used in petroleum refining. The special catalysts prepared and used in the experimental runs had surface area between 40-155 m 2 /gm. The liquid distillate yield in the new process is >20 w% higher than that in the current commercial process. Coal conversion in the experimental runs was moderate, in the range of 88 - 94 w% maf-coal. Though coal conversion can be increased by adjustment in operating conditions, the purpose of limiting coal conversion to moderate amounts in the process was to use the remaining unconverted coal for hydrogen production by steam reforming. Hydrogen consumption was in the range of 4.0 - 6.0 w% maf-coal. A preliminary economic analysis of the new coal liquefaction process was carried out by comparing the design and costs of the current commercial plant of the Shenhua Corporation in Erdos, Inner Mongolia. The cost of producing synthetic crude oil from coal in the current commercial process was estimated to be $50.5 per barrel compared to the estimated cost of 41.7 per barrel in the new process. As mentioned earlier, the light distillate product in the new process is of higher quality and value than the C 4 -975°F product in the current commercial process adopted by the Shenhua Corporation. In sum, the new coal liquefaction process is superior and less capital intensive to current commercial process, and has a high potential for commercialization.

01 COAL, LIGNITE, AND PEAT↗

Thermal Desalination as Cooling for a Supercritical Carbon Dioxide Brayton Cycle

Multi-effect distillation (MED) is commonly used for seawater desalination. MED offers numerous advantages over other existing thermal desalination systems. MED systems are commonly integrated with a steam-Rankine power cycle, for simultaneous production of power and freshwater. Low-pressure steam is extracted from the power cycle to act as a heat source for the MED. The operating temperature of the low-pressure steam must be high enough to drive the MED system. This necessitates an increase in the operating pressure on the power-cycle condenser, resulting in a decrease in power production. Hence, integration of MED with the steam-Rankine cycle is a parasitic load for the power plant. The supercritical carbon dioxide (sCO2) Brayton cycle is being pursued as a new power cycle because of its potential for higher energy efficiency and compact turbomachinery. The sCO2 exiting the low-temperature recuperator is quite hot and is cooled as a sensible-heat fluid before flowing back to the compressor. This heat is sufficiently hot to drive an MED system, rather than being rejected to the environment. Such a thermal integration could lead to simultaneous production of power and potable water without affecting the sCO2 Brayton cycle efficiency. The objective of the present study is to maximize the distillate production from MED without acting as a parasitic load. Optimal feed configuration for the MED is identified for maximizing the distillate concentration. Techno-economic analysis showed the cost of distillate for MED is about 30% lower than distillate produced by reverse osmosis (RO).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Combustion dynamics of crude and upgraded Thermal DeOxygenation oils in a compression ignition engine

Thermal DeOxygenation (TDO) is a robust thermochemical conversion scheme to produce hydrocarbons from biomass feedstock. The process targets the carbohydrate fraction of biomass to yield a broad mixture of primarily aromatic hydrocarbons within a boiling point range of 348–798 K with low oxygen content (<4 wt%). The resulting materials are amenable to traditional hydrotreating and distillation processes with approximately 70% by mass in the distillate fuel range. The simple conversion scheme combined with commercially viable upgrading routes makes TDO oils a feasible alternative fuel for transportation applications. Here this paper is the first systematic treatment of fit-for-purpose testing of TDO oils in a compression ignition engine. Blends of partially upgraded TDO oils (e.g. whole oil, distilled oil, hydrotreated oil and hydrotreated-distilled oil) are prepared with certified ultra-low sulfur diesel at 5%, 10%, 15% and 20% by volume. The resulting fuels are analyzed for fuel characteristics and combustion dynamics in an instrumented single-cylinder compression ignition engine. All fuel blends at 10% blend level by volume exhibited adequate engine performance. Hydrotreating of the oils is a necessary step to meet cetane number and EPA soot emissions requirements at 20% blend volume. Combined distillation and hydrotreatment meet or exceed all fuel specification and engine performance benchmarks. Partially upgraded TDO oils are suitable fuel options for compression ignition applications.

42 ENGINEERING↗

Optimized Co-Processing of Algae Bio-Crude through a Petroleum Refinery

A middle distillate algal oil blend and red diesel algal oil blend from Sapphire Energy, Inc. were hydrotreated and distilled. The middle distillate feedstock blend was 8.0 wt.% biocrude and 92.0 wt.% middle distillate. The red diesel feedstock blend was 12.6 wt.% biocrude and 87.4 wt.% red diesel. During steady state, 151.4 kilograms of hydrotreated middle distillate/algal oil blend product was collected. During steady state, 312.6 kilograms of red diesel/algal oil blend hydrotreated product was collected. From the liquid product of the hydrotreated middle distillate/algal oil blend, 9.75 wt.% of the jet fuel cut is estimated to be from the algal oil. From the liquid product of the hydrotreated red diesel/algal oil blend, 11.3 wt.% of the diesel cut is estimated to be from the algal oil. The jet fuel cut of the middle distillate algal oil blend hydrotreated liquid product was analyzed using ASTM D1655, Standard Specification for Aviation Turbine Fuels. The diesel cut of the red diesel algal oil blend hydrotreated liquid product was analyzed using ASTM D975, Standard Specification for Diesel Fuel Oils.

09 BIOMASS FUELS↗

An Integrated Supercritical System for Efficient Produced Water Treatment and Power Generation

The main goal of this project was to evaluate the feasibility of an integrated supercritical (SC) water desalination and power generation system for treatment of produced waters from CO 2 sequestration, oil production, and coal-bed methane recovery. This system may offer a transformative approach to generating power from coal or natural gas (NG) and purifying saline water or produced water with high total dissolved solids (TDS) in a zero-liquid discharge plant. The closed-loop steam cycle of conventional power plants was replaced with an open-loop steam cycle that heated the pretreated produced water above the SC point of water (374 °C and 221 bar) to precipitate and separate the salts dissolved in the water. After separation of the precipitated salt, the SC steam required further treatment to reduce the salt content from ~100 mg/L (ppm) to <1 ppm to make it suitable for use in turbines for power generation. A SC membrane distillation unit was used to polish the SC steam, which could be sent through a series of turbines for power generation, and the steam exiting the low-pressure turbine could be condensed by cooling water to produce pure water. Project tasks included a process simulation and a techno-economic evaluation of the integrated system; design and assembly of SC salt precipitation and membrane distillation systems; development and characterization of advanced carbon membranes for SC membrane distillation; and pretreatment, desalination, and purification of different produced water samples with salt concentrations of 30,000–200,000 ppm to a high-purity (<1 ppm) level. Process simulations were performed for 550 MW SC coal-fired or NG baseline cases and various scenarios for the proposed integrated SC system using produced water as the water source and coal or NG as the fuel source. Simulation results indicated that the net plant efficiency loss of the proposed SC cogeneration process would be in the range of <1% to ~4%, in which NG and lower TDS produced water cases would have higher efficiencies. The proposed process for coal-fired cases could provide all water needs for the power generation process and generate additional pure water for beneficial use. A techno-economic analysis was performed to estimate the cost of produced water treatment (dollars /kgal of treated water) by conventional treatment processes compared with the proposed cogeneration process. The cost estimation for the proposed cogeneration system included the cost of pretreatment, the cost of power loss to integrate the water desalination process into the power generation system, and the cost of plant modification or retrofitting. The cost of produced water treatment was calculated by assuming three different scenarios in which converting a baseline power plant to the proposed cogeneration plant would increase the cost of the boiler and feed water system by 10%, 50%, and 100%. Results indicated that the cost of produced water treatment, even with a 100% cost increase, was in the range of $8.6–11.6 dollars per kgal, which is about half of the treatment cost by conventional methods. The cost of produced water treatment by the proposed cogeneration system could be further reduced or a considerable income could be generated if the values of saltwater and freshwater products are considered. Overall, the techno-economic analysis results indicated that the proposed integrated SC system could potentially treat produced water at a cost significantly lower than the cost of produced water treatment by conventional technologies. To evaluate the feasibility of the proposed treatment system at a laboratory scale, a SC salt precipitation and membrane distillation system was designed and fabricated to treat a simulated brine or pretreated produced water by precipitating salts and further polishing the SC steam containing ~100 ppm salts to a high-purity steam. Through baseline tests with NaCl solutions, with concentrations ranging from 30,000 to 200,000 ppm, it was demonstrated that concentrated feed solutions could be treated by precipitating salt at SC conditions to a TDS level of 130 ppm. Produced water samples were collected from a potential CO 2 sequestration site, a coal-bed methane site, and an oilfield in Illinois. Representative samples were characterized for various water quality parameters, including pH; turbidity; conductivity; and concentrations of selected anions, cations, alkalinity, dissolved organic carbon, total suspended solids, TDS, and total petroleum hydrocarbons. The produced water samples were first treated by conventional pretreatment methods to remove residual oil, dissolved organic matter, and scale-forming species. Pretreatment methods included coagulation, sedimentation, filtration, activated carbon adsorption, and ion-exchange adsorption. Pretreated produced waters were treated at SC conditions in which salts were precipitated. Analysis of treated samples revealed that the concentration of Na (the main cation) in produced waters was reduced dramatically from 14,000–47,400 ppm in the feed to 21–80 ppm in treated waters. Concentrations of other main cations (Ca, Mg, Sr, K) also decreased significantly from initial values of ~1,000–22,000 ppm to ~1 ppm or less. However, a significant increase in the concentrations of Fe, Ni, Cu, and Co was observed, mainly caused by leaching of these elements from the system (vessels, filters, tubing), which is manufactured from alloys containing Fe, Ni, Cu, and Co. To polish the SC steam containing a salt content of ~100 ppm to a high-purity level of <1 ppm, a SC membrane distillation treatment using carbon membranes was employed. Different types of self-standing or supported carbon membranes were developed from graphite, graphene, carbon nanotubes, carbon nanofibers, and pyrolytic carbon. Screening tests revealed that only a limited number of developed carbon membranes were suitable for the purification of steam at SC conditions. Membranes that were either fragile and lacked mechanical strength or had large pores and showed limited salt rejection (<20%) were found to be unsuitable for the purification of SC steam. Promising carbon membranes that were successfully tested for purifying SC steam included two graphite membranes (i.e., AF-5, a porous graphite material, and FGS, a flexible graphite sheet) and a carbon nanotube membrane grown on a Hastelloy substrate and then further modified using a proprietary method (i.e., membrane C). The AF-5 membrane exhibited a stable water flux of ~50 kg/m 2 ∙h and ~40% salt rejection. The FGS membrane had a high salt rejection of 95%–98% but a lower water flux of ~15 kg/m 2 ∙h. Membrane C showed an extremely high flux of 200-800 kg/m 2 ∙h, which is one order of magnitude higher than the water flux of conventional membranes. Membrane C also exhibited 87%–93% salt rejection. Overall, a two-stage or multistage polishing treatment by these membranes could lower the salt content of the SC steam from initial values of ~100–200 ppm to the steam quality of <1 ppm or to parts per billion levels required for the power cycle.

20 FOSSIL-FUELED POWER PLANTS↗

A study of volatile contaminants in recovered water

The recovery and reuse of water during long term space flight is discussed. Particular attention was given to obtaining basic information on the volatile impurities in urine samples and in water recovered from urine by distillation. Data also cover laboratory distillation tests to determine the nature and extent of volatile constituents in the distillate and an evaluation of possible problems in distillation due to iodine used for control of microbial contamination. Efforts made to develop design criteria for distillation equipment to minimize the problems of volatile contaminants various methods which might be used for purification subsequent to recovery are included.

Mckee, H. C.↗

Air Stripping Designs and Reactive Water Purification Processes for the Lunar Surface

Air stripping designs are considered to reduce the presence of volatile organic compounds in the purified water. Components of the wastewater streams are ranked by Henry's Law Constant and the suitability of air stripping in the purification of wastewater in terms of component removal is evaluated. Distillation processes are modeled in tandem with air stripping to demonstrate the potential effectiveness and utility of these methods in recycling wastewater on the Moon. Scaling factors for distillation and air stripping columns are presented to account for the difference in the lunar gravitation environment. Commercially available distillation and air stripping units which are considered suitable for Exploration Life Support are presented. The advantages to the various designs are summarized with respect to water purity levels, power consumption, and processing rates. An evaluation of reactive distillation and air stripping is presented with regards to the reduction of volatile organic compounds in the contaminated water and air. Among the methods presented, an architecture is presented for the evaluation of the simultaneous oxidation of organics in air and water. These and other designs are presented in light of potential improvements in power consumptions and air and water purities for architectures which include catalytic activity integrated into the water processor. In particular, catalytic oxidation of organics may be useful as a tool to remove contaminants that more traditional distillation and/or air stripping columns may not remove. A review of the current leading edge at the commercial level and at the research frontier in catalytically active materials is presented. Themes and directions from the engineering developments in catalyst design are presented conceptually in light of developments in the nanoscale chemistry of a variety of catalyst materials.

Boul, Peter J.↗

Evaluation of the Maximum Soluble Water Recovery from Pretreated Urine Brines in Low Earth Orbit

The Urine Processor Assembly (UPA) on the International Space Station recovers water from pretreated urine by thin-film, vacuum compression distillation (VCD). A number of iterative improvements to the distiller assembly (DA) have enabled increases in on-orbit water recovery and improved distillate water quality at on-orbit recoveries up to 87% by volume relative to the volume of pretreated urine. The phosphoric acid-based pretreatment formulation has enabled these higher recoveries on-orbit since May of 2016. Application of simple empirical chemistry models have allowed water recovery of sulfuric-acid pretreated urine from the Russian Orbiting segment to be distilled with phosphoric acid pretreated urine from the U.S. Orbiting Segment. Returned liquid brine from brine filters in the UPA brine loop have enabled empirical measurement of gypsum solubility as a function of recovery, conductivity, or mass density in the real brines of ISS. Calculations of maximum soluble recovery, MSR, are based on preventing the precipitation of gypsum, which is the first mineral to precipitate for both types of pretreated urine. A statistical urine model of urine composition provides an estimate of worst-case urine from a crew of three during one year of operations on ISS. The MSR is defined based on the worst-case concentrations of urinary calcium and urinary sulfate that are pretreated, pooled, and distilled. The potential to increase water recoveries above 87% without gypsum precipitation are evaluated. The potential benefits and costs of the addition of a conductivity sensor or a Coriolis mass flow meter to the brine loop are evaluated.

Dean L Muirhead↗