Search NASA⌕ Search

SEARCH · Search NASA

Results for “Drop”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Urban NO x emissions around the world declined faster than anticipated between 2005 and 2019

Emission inventory development for air pollutants, by compiling records from individual emission sources, takes many years and involves extensive multi-national effort. A complementary method to estimate air pollution emissions is in the use of satellite remote sensing. In this study, NO 2 observations from the Ozone Monitoring Instrument are combined with re-analysis meteorology to estimate urban nitrogen oxide (NO X ) emissions for 80 global cities between 2005 and 2019. The global average downward trend in satellite-derived urban NO X emissions was 3.1%–4.0% yr -1 between 2009 and 2018 while inventories show a 0%–2.2% yr -1 drop over the same timeframe. This difference is primarily driven by discrepancies between satellite-derived urban NO X emissions and inventories in Africa, China, India, Latin America, and the Middle East. In North America, Europe, Korea, Japan, and Australasia, NO X emissions dropped similarly as reported in the inventories. In Europe, Korea, and Japan only, the temporal trends match the inventories well, but the satellite estimate is consistently larger over time. While many of the discrepancies between satellite-based and inventory emissions estimates represent real differences, some of the discrepancies might be related to the assumptions made to compare the satellite-based estimates with inventory estimates, such as the spatial disaggregation of emissions inventories. Overall, our work identifies that the three largest uncertainties in the satellite estimate are the tropospheric column measurements, wind speed and direction, and spatial definition of each city.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Process-based climate change assessment for European winds using EURO-CORDEX and global models

Wind energy is an important pillar of decarbonization strategies and potentially vulnerable to climate change. Existing wind climate change assessments rely on climate models but a systematic investigation of the global-to-regional climate modeling chain is missing. In this study, I highlight key limitations, namely (a) the differing representation of land use change in global and regional climate models which compromises comparability, and (b) the consistency of large-scale features along the global-to-regional climate modeling chain. To this end, I analyze the large European Coordinated Downscaling Experiment (EURO-CORDEX) ensemble (rcp85: N = 49; rcp45: N= 18; rcp26: N = 22) along with the driving global models (rcp85: N = 7; rcp45: N = 5; rcp26: N = 7), finding evidence that climate change reduces mean wind speeds by up to -0.8 ms -1 (offshore) and -0.3 ms -1 (onshore). I provide physical explanations for these changes by identifying two key drivers. First, onshore wind speeds drop in the driving global models in regions and scenarios with strong land use change but show no drop in EURO-CORDEX where land use is held constant. Second, offshore wind reductions follow decreases in the equator-to-pole temperature gradient remarkably well with correlations reaching around 0.9 in resource-rich European countries like Ireland, the United Kingdom and Norway, implying that arctic amplification is a severe risk for European offshore wind energy. My results suggest that earlier conclusions of negligible climate change impacts on wind energy might be premature if either land use changes strongly or polar amplification is at or above the range sampled in global climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Status of the LCLS-II Cryogenic Distribution System

The LINAC Coherent Light Source II (LCLS-II) located at SLAC National Accelerator Laboratory (SLAC) in Menlo Park, CA, is a U.S. Department of Energy project tasked to design and build a world-class x-ray free-electron laser facility for scientific research. The Linac has superconducting radio frequency cryomodules that are connected to the cryogenic plant by the Cryogenic Distribution System (CDS), which consists of distribution boxes with heat exchangers and reliefs, feed caps, end caps, and surface, vertical, and bypass transfer lines. The CDS components were designed and built to specification by industry. The components have been delivered and their installation at SLAC will be discussed. The as-built relief system design will be presented, showing minimization of relief inlet pressure drops while meeting capacity requirements. The relieving flow pressure drops along the lengths of the CDS to centrally located reliefs at the distribution box were analysed to satisfy Pressure Vessel and Process Piping Code criteria to ensure relief performance. The sub-atmospheric 2 K circuit relieving approach will be discussed, which includes a three-way diverter isolation valve suitable for sub-atmospheric service. The component anchoring load design approach and installation into concrete floor will be discussed. This addresses loading, including seismic loading, along the component’s load path to floor anchoring system.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Integrated Biorefinery for Valorization of Engineered Bioenergy Crops—A Review

Biorefinery allows production of multiple bioproducts from various biomass and streams using suitable unit operations to improve the economics of process while minimizing waste generation. Biorefinery holds importance in the biofuel industry because multiple coproducts can allow to produce biofuels at a price which is competitive of fossil fuels. Newer generations of cellulosic biomasses are being developed to accumulate lipids and pigments. Such crops, which can be cultivated on land unsuitable for row crops, are aimed to provide drop-in fuels to reduce dependency on fossil fuels and food crops. This review describes the potential of recovery and value addition to different constituents of engineered crops besides producing drop-in fuels. As a result, the work also provides the market value of different products which can be obtained from engineered crops to make an informed decision.

09 BIOMASS FUELS↗
DOE OSTI2023

The effect of shear strain and shear localization on fault healing

The seismic cycle of repeated earthquake failure requires that faults regain frictional strength during the interseismic phase, when the fault is locked or undergoing quasi-static creep. Fault healing plays a central role in determining earthquake stress drop, recurrence interval, elastic radiation frequency and other source parameters. In particular, the longer a fault remains quasi-stationary, the stronger it becomes and the larger the potential stress drop can be for the next event. Here, we address the role of shear strain and strain localization on fault healing and healing rate. We performed slide-hold-slide friction experiments on quartz gouge in the double-direct shear configuration for shear strain up to 25 and hold times from 10 to 1000 s. The results show that both healing and healing rate increase nonlinearly with increasing shear strain. Frictional healing scales with volumetric strain within the laboratory fault zone. Using the volumetric strain upon reshear as a proxy for strain localization, we demonstrate that the capacity of a fault to heal is directly proportional to shear bandwidth and degree of strain localization. The more the deformation is localized, the higher are the healing and healing rate, and thus, the fault strength. Our data provide a framework for understanding variations in fault strength over the seismic cycle and the role of brecciation and strain localization on spatiotemporal variations in fault strength.

58 GEOSCIENCES↗
DOE OSTI2020

The phase-space structure of dark matter haloes

ABSTRACT The phase space structure of dark matter haloes can be used to measure the mass of the halo, infer mass accretion rates, and probe the effects of modified gravity. Previous studies showed that the splashback radius can be measured in position space using a sharp drop in the density profile. Using N-body simulations, we model the distribution of the kinematically distinct infalling and orbiting populations of subhaloes and haloes. We show that the two are mixed spatially all the way to redge, which extends past the splashback radius defined by the drop in the spherically averaged density profile. This edge radius can be interpreted as a radius that contains a fixed fraction of the apocentres of dark matter particles. Our results highlight the possibility of measuring the outer boundary of a dark matter halo using its phase space structure and provide a firm theoretical foundation to the satellite galaxy model adopted in the companion paper, where we analysed the phase space distribution of Sloan Digital Sky Survey redMaPPer clusters.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

22 K superconductivity in Ba Fe 2 As 2 exposed to F 2

Several previous reports on undoped AEFe 2 As 2 (AE = alkaline earth metal) point to drops in resistivity indicative of possible superconductivity and some degree of Meissner effect in the magnetic susceptibility. Also, based on both resistivity and magnetic susceptibility measurements, controlled exposure to water vapor has been shown to induce superconductivity in AEFe 2 As 2 . In our study, BaFe 2 As 2 single crystals grown using the self-flux method showed a full resistive drop around 22 K and magnetic shielding, when exposed to fluorine gas postgrowth. Our measurements indicate electron (donor) doping via atomic substitution of F for As is concurrent with the observed superconductivity, which sheds light on the likely effect of exposure to water vapor in previous work. Like doping experiments (such as substitution of Co for Fe, P for As, or K for Ba) in AEFe 2 As 2 to date, the present work is consistent with suppression of the spin density wave transition coincident with the appearance of T c . In addition to answering the puzzle of superconductivity in undoped or water vapor exposed AEF 2 As 2 , our results also represent a fast (20 min exposure to 5% F in He) and reliable method suitable for inducing superconductivity in thin films of AEFe 2 As 2 . As a result, some supportive work on BaFe 2 As 2 exposed to Cl 2 is also presented.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fast flavor instability in hypermassive neutron star disk outflows

Here, we examine the effect of neutrino flavor transformation by the fast flavor instability (FFI) on long-term mass ejection from accretion disks formed after neutron star mergers. Neutrino emission and absorption in the disk set the composition of the disk ejecta, which subsequently undergoes r-process nucleosynthesis upon expansion and cooling. Here we perform 28 time-dependent, axisymmetric, viscous-hydrodynamic simulations of accretion disks around hypermassive neutron stars (HMNSs) of variable lifetime, using a 3-species neutrino leakage scheme for emission and an annular-lightbulb scheme for absorption. We include neutrino flavor transformation due the FFI in a parametric way, by modifying the absorbed neutrino fluxes and temperatures, allowing for flavor mixing at various levels of flavor equilibration, and also in a way that aims to respect the lepton-number preserving symmetry of the neutrino self-interaction Hamiltonian. We find that for a promptly-formed black hole (BH), the FFI lowers the average electron fraction of the disk outflow due to a decrease in neutrino absorption, driven primarily by a drop in electron neutrino/antineutrino flux upon flavor mixing. For a long-lived HMNS, the disk emits more heavy lepton neutrinos and reabsorbs more electron neutrinos than for a BH, with a smaller drop in flux compensated by a higher neutrino temperature upon flavor mixing. The resulting outflow has a broader electron fraction distribution, a more proton-rich peak, and undergoes stronger radiative driving. Disks with intermediate HMNS lifetimes show results that fall in between these two limits. In most cases, the impact of the FFI on the outflow is moderate, with changes in mass ejection, average velocity, and average electron fraction of order ~10%, and changes in the lanthanide/actinide mass fraction of up to a factor ~2.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Electron acceleration at oblique angles via stimulated Raman scattering at laser irradiance >10 16 W cm –2 μm 2

The generation of hot, directional electrons via laser-driven stimulated Raman scattering (SRS) is a topic of great importance in inertial confinement fusion (ICF) schemes. Little recent research has been dedicated to this process at high laser intensity, in which back, side, and forward scatter simultaneously occur in high energy density plasmas, of relevance to, for example, shock ignition ICF. In this paper, we present an experimental and particle-in-cell (PIC) investigation of hot electron production from SRS in the forward and near-forward directions from a single speckle laser of wavelength λ 0 = 1.053μm, peak laser intensities in the range I 0 = 0.2–1.0×10 17 Wcm –2 and target electron densities between ne = 0.3–1.6% n c , where n c is the plasma critical density. As the intensity and density are increased, the hot electron spectrum changes from a sharp cutoff to an extended spectrum with a slope temperature T = 34 ± 1 keV and maximum measured energy of 350 keV experimentally. Multidimensional PIC simulations indicate that the high energy electrons are primarily generated from SRS-driven electron plasma wave phase fronts with k vectors angled ~50° with respect to the laser axis. These results are consistent with analytical arguments that the spatial gain is maximized at an angle which balances the tendency for the growth rate to be larger for larger scattered light wave angles until the kinetic damping of the plasma wave becomes important. The efficiency of generated high energy electrons drops significantly with a reduction in either laser intensity or target electron density, which is a result of the rapid drop in growth rate of Raman scattering at angles in the forward direction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Torque and Angular-Momentum Transfer in Merging Rotating Bose-Einstein Condensates

When rotating classical fluid drops merge together, angular momentum can be advected from one to another due to the viscous shear flow at the drop interface. It remains elusive what the corresponding mechanism is in inviscid quantum fluids such as Bose-Einstein condensates (BECs). In this work, we report our theoretical study of an initially static BEC merging with a rotating BECin three-dimensional space along the rotational axis. We show that a solitonlike sheet, resembling a corkscrew, spontaneously emerges at the interface. Furthermore, rapid angular momentum transfer at a constant rate universally proportional to the initial angular-momentum density is observed. Strikingly, this transfer does not necessarily involve fluid advection or drifting of the quantized vortices. We reveal that the corkscrew structure can exert a torque that directly creates angular momentum in the static BEC and annihilates angular momentum in the rotating BEC. Uncovering this intriguing angular momentum transport mechanism may benefit our understanding of various coherent matter-wave systems, spanning from atomtronics on chips to dark matter BECs at cosmic scales.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Localization Effect in Photoelectron Transport Induced by Alloy Disorder in Nitride Semiconductor Compounds

Near-band-gap photoemission spectroscopy experiments were performed on p-GaN and p-InGaN/GaN photocathodes activated to negative electron affinity. Here, the photoemission quantum yield of the InGaN samples with more than 5% of indium drops by more than 1 order of magnitude when the temperature is decreased while it remains constant for lower indium content. This drop is attributed to a freezing of photoelectron transport in p-InGaN due to electron localization in the fluctuating potential induced by the alloy disorder. This interpretation is supported by the disappearance at low temperature of the peak in the photoemission spectrum that corresponds to the contribution of the photoelectrons relaxed at the bottom of the InGaN conduction band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Isostructural Phase Transition of Fe 2 ⁢O 3 under Laser Shock Compression

We present in situ x-ray diffraction and velocity measurements of Fe 2⁢ O 3 under laser shock compression at pressures between 38–122 GPa. None of the high-pressure phases reported by static compression studies were observed. Instead, we observed an isostructural phase transition from 𝛼−Fe 2⁢ O 3 to a new 𝛼′−Fe 2 ⁢O 3 phase at a pressure of 50–62 GPa. The 𝛼′−Fe 2⁢ O 3 phase differs from 𝛼−Fe 2 ⁢O 3 by an 11% volume drop and a different unit cell compressibility. We further observed a two-wave structure in the velocity profile, which can be related to an intermediate regime where both 𝛼 and 𝛼′ phases coexist. Furthermore, density functional theory calculations with a Hubbard parameter indicate that the observed unit cell volume drop can be associated with a spin transition following a magnetic collapse.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Interfacial thermal transport in spin caloritronic material systems

Interfaces often govern the thermal performance of nanoscale devices and nanostructured materials. As a result, accurate knowledge of thermal interface conductance is necessary to model the temperature response of nanoscale devices or nanostructured materials to heating. Here, we report the thermal boundary conductance between metals and insulators that are commonly used in spin-caloritronic experiments. We use time-domain thermoreflectance to measure the interface conductance between metals such as Au, Pt, Ta, Cu, and Al with garnet and oxide substrates, e.g., NiO, yttrium iron garnet (YIG), thulium iron garnet (TmIG), Cr 2 O 3 , and sapphire. We find that, at room temperature, the interface conductance in these types of material systems range from 50 to 300 MW m –2 K –1 . Furthermore, we also measure the interface conductance between Pt and YIG at temperatures between 80 and 350 K. At room temperature, the interface conductance of Pt/YIG is 170 MW m –2 K –1 and the Kapitza length is ~40 nm. A Kapitza length of 40 nm means that, in the presence of a steady-state heat current, the temperature drop at the Pt/YIG interface is equal to the temperature drop across a 40-nm-thick layer of YIG. At 80 K, the interface conductance of Pt/YIG is 60 MW m –2 K –1 , corresponding to a Kapitza length of ~300 nm.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Open-source electrochemical cell for in situ X-ray absorption spectroscopy in transmission and fluorescence modes

X-ray spectroscopy is a valuable technique for the study of many materials systems. Characterizing reactions in situ and operando can reveal complex reaction kinetics, which is crucial to understanding active site composition and reaction mechanisms. In this project, the design, fabrication and testing of an open-source and easy-to-fabricate electrochemical cell for in situ electrochemistry compatible with X-ray absorption spectroscopy in both transmission and fluorescence modes are accomplished via windows with large opening angles on both the upstream and downstream sides of the cell. Using a hobbyist computer numerical control machine and free 3D CAD software, anyone can make a reliable electrochemical cell using this design. Onion-like carbon nanoparticles, with a 1:3 iron-to-cobalt ratio, were drop-coated onto carbon paper for testing in situ X-ray absorption spectroscopy. Cyclic voltammetry of the carbon paper showed the expected behavior, with no increased ohmic drop, even in sandwiched cells. Chronoamperometry was used to apply 0.4 V versus reversible hydrogen electrode, with and without 15 min of oxygen purging to ensure that the electrochemical cell does not provide any artefacts due to gas purging. The XANES and EXAFS spectra showed no differences with and without oxygen, as expected at 0.4 V, without any artefacts due to gas purging. The development of this open-source electrochemical cell design allows for improved collection of in situ X-ray absorption spectroscopy data and enables researchers to perform both transmission and fluorescence simultaneously. It additionally addresses key practical considerations including gas purging, reduced ionic resistance and leak prevention.

08 HYDROGEN↗
DOE OSTI2023

Enhanced Large-Signal Stability Method for Grid-Forming Inverters During Current Limiting: Preprint

Grid-forming (GFM) inverters are a promising technology for the widespread integration of renewable energy sources in future power systems. As a key element of GFM inverter control, the primary controller governs the internal reference voltage and angle. During contingencies in the grid---such as faults, voltage drops, or frequency and phase jumps---an inverter can be forced into a current-limiting mode of operation modulating inverter dynamics, and, as a result, it is prone to losing synchronism with the grid. In this paper, we propose a novel GFM primary control method with an additional synchronization term that naturally activates during contingencies to improve the dynamic response. The method allows the inverter to remain synchronized with the grid, which improves the inverter's dynamic behavior both during and after current-limiting grid conditions and enhances grid support, including voltage support using full current capacity. The method is demonstrated for voltage, frequency, and phase jumps both in a single-machine-to-infinite-bus and a network-wide electromagnetic transient simulation of the IEEE 14-bus system with 5 GFM inverters. The simulations provide insights into the proposed synchronization method and confirm the high potential of the method, which robustly secures synchronism under severe contingencies.

current limiting↗
DOE OSTI2020

CCM vs. CRM Design Optimization of a Boost-derived Parallel Active Power Decoupler for Microinverter Applications

Single-phase inverter or rectifier systems often make use of an auxiliary active power decoupler (APD) to balance the mismatch between steady DC power and fluctuating AC power. This paper deals with efficiency and size optimization of a parallel boost-type APD circuit for PV microinverter applications. Specifically, design of an eGaNFET-based, 400 W APD circuit, employing planar inductor and operating in either continuous conduction mode (CCM) or critical conduction mode (CRM) is considered. Available design variables including inductance value, inductor core geometry, capacitor voltage, switching frequency, and modulation scheme (CCM vs. CRM) are explored to identify Pareto-optimal configurations, which can achieve low California Energy Commission (CEC) efficiency drop while also reducing the footprint area of the inductor. The theoretical study predicts that the optimal CRM design can achieve 37% reduced inductor size, while operating with similar efficiency drop, compared to the optimal CCM design. Experimental results, obtained using two separate 40 V, 400 W hardware prototypes for CCM and CRM, are presented to verify the analyses.

14 SOLAR ENERGY↗
DOE OSTI2022

New Hybrid Model for Evaluating the Frequency-Dependent Leakage Inductance of a Variable Inductance Transformer (VIT)

Skin and proximity effects can cause a significant drop in the effective leakage inductance of a transformer when the operating frequency is increased. Although the magnetic image method-based double-2-D model can calculate the lowfrequency leakage inductance with sufficient accuracy, it is inherently a frequency-independent model. While Dowell’s 1-D model uses frequency-dependent relations to account for both skin and proximity effects, its accuracy is severely affected by the assumed winding geometry. In this paper, a hybrid model is proposed that uses superposition to combine a modified Dowell’s model with the double-2-D model. The proposed model is investigated on a variable inductance transformer (VIT)—a partially-filled transformer whose leakage inductance can be varied by moving one of the windings mechanically. The frequency-dependent leakage inductances of the VIT evaluated using the hybrid model are in excellent agreement with the corresponding finite element method (FEM) simulated and experimentally measured values, thereby validating the proposed hybrid model.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Surface Merging Technique to Design GA-Optimized Heat Sinks

High-power density inverters require efficient and small heat dissipation systems. For liquid cooling systems, an effective heat sink design is important to enable higher heat transfer and keep the pressure drop within reasonable limits. A heat sink geometry generated from an extruded, 1D fast Fourier transform can achieve more even temperature distribution and improved heat transfer than a conventional heat sink. Building on this concept, this paper proposes a new heat sink geometry creation algorithm. Instead of one plane profile being extruded, multiple plane profiles, each created from the fast Fourier transform method, are subsequently merged by smooth surfaces along the flow direction of the heat sink. Thus, a 3D heat sink geometry is created that enables 3D coolant flow and efficient heat transfer. The volume of this design was reduced by 50% compared with pin fin heat sinks. Compared with extruded 1D fast Fourier transform heat sinks, the proposed design showed an approximately 5% device temperature reduction and a 20% pressure drop reduction.

Barua, Himel↗