Search NASA⌕ Search

SEARCH · Search NASA

Results for “EFFECTIVE MASS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

In-plane g factor of low-density two-dimensional holes in a Ge quantum well.

High-mobility two-dimensional (2D) holes residing in a Ge quantum well are a new electronic system with potentials in quantum computing and spintronics. Since for any electronic material, the effective mass and the g factor are two fundamental material parameters that determine the material response to electric and magnetic fields, measuring these two parameters in this material system is thus an important task that needs to be completed urgently. Because of the quantum confinement in the crystal growth direction (z), the biaxial strain of epitaxial Ge on SiGe, and the valance band nature, both the effective mass and the g factor can show very strong anisotropy. In particular, the in-plane g factor (g ip ) can be vanishingly small while the perpendicular g factor (g z ) can be much larger than 2. Here we report the measurement of g ip at very low hole densities using in-plane magneto-resistance measurement performed at the NHMFL.

36 MATERIALS SCIENCE↗

Quasiparticle self-consistent GW band structures and phase transitions of LiAlO 2 in tetrahedrally and octahedrally coordinated structures

In this work, a first-principles computational study is presented of various phases of LiAlO 2 . The relative total energies and equations of state of the α, β, and γ phases are determined after structural relaxation of each phase. The β and γ tetrahedral phases are found to be very close in energy and lattice volume with the γ phase having the lowest energy. The octahedral α phase is a high-pressure phase and the transition pressure from the γ and β phases to α is determined to be about 1 GPa. The electronic band structures of each phase at their own equilibrium volume are determined using the quasiparticle self-consistent (QS) GW method as well as using the 0.8 Σ approach in which the QS GW self-energy is reduced by a factor of 0.8 to correct for the underscreening of W in QS GW. The effective masses of the band edges and the nature of the band gaps are presented. The lowest energy γ phase is found to have a pseudodirect gap of 7.69 eV. The gap is direct at Γ but corresponds to a dipole forbidden transition. The imaginary part of the dielectric function and the absorption coefficient are calculated in the long-wavelength limit and the random phase approximation, without local field or electron-hole interaction effects for each phase, and their anisotropies are discussed. Si doping on the Al site is investigated as a possible n-type dopant in γ-LiAlO 2 using a 128-atom supercell corresponding to 3.125% Si on the Al sublattice in the generalized gradient approximation and a smaller 16-atom cell with 25% Si in the QS GW approximation. The Si is found to significantly perturb the conduction band and lower the gap but a clearly separated deep donor defect level is not found. However, the donor binding energy is still expected to be relatively deep, on the order of a few tenths eV in the hydrogenic effective mass approximation.

36 MATERIALS SCIENCE↗

Ideal magnetohydrodynamic theory for localized interchange modes in toroidal anisotropic plasmas

Ideal magnetohydrodynamic theory for localized interchange modes is developed for toroidal plasmas with anisotropic pressure. The work extends the existing theories of Johnson and Hastie [Phys. Fluids 31, 1609 (1988)], etc., to the low n mode case, where n is the toroidal mode number. Also, the plasma compressibility is included, so that the coupling of the parallel motion to perpendicular one, i.e., the so-called apparent mass effect, is investigated in the anisotropic pressure case. Lastly, the singular layer equation is obtained, and the generalized Mercier's criterion is derived.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First-Principles Design and Analysis of an Efficient, Pb-Free Ferroelectric Photovoltaic Absorber Derived from ZnSnO 3

Ferroelectric oxides, which exhibit a spontaneous and reversible electric polarization, have recently gained interest for photovoltaic applications, because this polarization can potentially facilitate exciton separation and carrier extraction while also generating open-circuit voltages orders-of-magnitude larger than the band gap. However, photovoltaic efficiencies in these materials are often limited by large band gaps and high hole effective masses. Developing a means to simultaneously reduce both without destroying the ferroelectric polarization could revolutionize photovoltaic technologies. In this work, we use first-principles computations to describe how chemical substitution of oxygen in the recently characterized ferroelectric ZnSnO 3 with sulfur to form ZnSnS 3 reduces the band gap to a near-optimal 1.3 eV while leaving the polarization virtually unchanged. Furthermore, we show that other key photovoltaic materials characteristics, such as hole effective mass, dielectric constant, and absorption coefficient, are also dramatically improved by sulfur substitution. Finally, we demonstrate that the well-known semiconductor GaN provides an excellent substrate on which to grow ZnSnS 3 , forming a strongly bound interface that is free of intrinsic midgap states and exhibits an ideal band alignment for efficient carrier extraction. Finally, this work advances the search for an Earth-abundant, nontoxic, ferroelectric material exhibiting strong solar absorption, and may enable the development of solar cells with both high photovoltage and photocurrent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Finding the hidden valence band of N = 7 armchair graphene nanoribbons with angle-resolved photoemission spectroscopy

To understand the optical and transport properties of graphene nanoribbons, an unambiguous determination of their electronic band structure is needed. In this work we demonstrate that the photoemission intensity of each valence sub-band, formed due to the quantum confinement in quasi-one-dimensional (1D) graphene nanoribbons, is a peaked function of the two-dimensional (2D) momentum. We resolve the long-standing discrepancy regarding the valence band effective mass (m* VB ) of armchair graphene nanoribbons with a width of N = 7 carbon atoms (7-AGNRs). In particular, angle-resolved photoemission spectroscopy (ARPES) and scanning tunneling spectroscopy report m* VB ≈0.2 and ≈0.4 of the free electron mass (m e ), respectively. ARPES mapping in the full 2D momentum space identifies the experimental conditions for obtaining a large intensity for each of the three highest valence 1D sub-bands. Our detail map reveals that previous ARPES experiments have incorrectly assigned the second sub-band as the frontier one. The correct frontier valence sub-band for 7-AGNRs is only visible in a narrow range of emission angles. For this band we obtain an ARPES derived effective mass of 0.4 m e , a charge carrier velocity in the linear part of the band of 0.63 x 10 6 m s -1 and an energy separation of only ≈60 meV to the second sub-band. Lastly, our results are of importance not only for the growing research field of graphene nanoribbons but also for the community, which studies quantum confined systems.

36 MATERIALS SCIENCE↗

First-principles study on doping and temperature dependence of thermoelectric property of Bi{sub 2}S{sub 3} thermoelectric material

Graphical abstract: The direction-induced ZT is found. At ZZ direction and n = 1.47 × 10{sup 19} cm{sup −3}, the ZT can reach maximal value, 0.36, which is three times as much as maximal laboratorial value. This result matches well the analysis of electron effective mass. Highlights: ► Electrical transportations of Bi{sub 2}S{sub 3} depend on the concentration and temperature. ► The direction-induced ZT is found. ► At ZZ direction and n = 1.47 × 10{sup 19} cm{sup −3}, the ZT can reach maximal value, 0.36. ► The maximal ZT value is three times as much as maximal laboratorial value. ► By doping and temperature tuning, Bi{sub 2}S{sub 3} is a promising thermoelectric material. - Abstract: The electronic structure and thermoelectric property of Bi{sub 2}S{sub 3} are investigated. The electron and hole effective mass of Bi{sub 2}S{sub 3} is analyzed in detail, from which we find that the thermoelectric transportation varies in different directions in Bi{sub 2}S{sub 3} crystal. Along ac plane the higher figure of merit (ZT) could be achieved. For n-type doped Bi{sub 2}S{sub 3}, the optimal doping concentration is found in the range of (1.0–5.0) × 10{sup 19} cm{sup −3}, in which the maximal ZT reaches 0.21 at 900 K, but along ZZ direction, the maximal ZT reaches 0.36. These findings provide a new understanding of thermoelectricity-dependent structure factors and improving ZT ways. The donor concentration N increases as T increases at one bar of pressure under a suitable chemical potential μ, but above this chemical potential μ, the donor concentration N keeps a constant.

36 MATERIALS SCIENCE↗

Computationally Guided Discovery of Axis-Dependent Conduction Polarity in NaSnAs Crystals

Most electronic materials exhibit a single dominant charge carrier type, either holes or electrons, along all crystallographic directions. However, there are a small number of compounds, mostly metals, that exhibit simultaneous p-type and n-type conduction behavior along different crystallographic directions. We demonstrate that the experimental discovery of semiconductors with this axis-dependent conduction polarity can be facilitated by identifying a large anisotropy of either the electron or hole effective masses (m*) or both, providing the electron and hole masses dominate along different crystallographic directions. We calculated the layered semiconductor NaSnAs to have a lower electron m* in-plane than the cross-plane and a very large hole m* in-plane and small hole m* cross-plane. We established the growth of >3 mm-sized NaSnAs crystals via Sn flux and confirmed the band gap to be 0.65 eV, in agreement with theory. NaSnAs exhibits p-type thermopowers cross-plane and n-type thermopowers in-plane, confirming that the large anisotropy in the effective mass at the band edges is an excellent indicator for axis-dependent conduction polarity. Altogether, this work shows that the discovery of semiconductors with such a phenomenon can be accelerated by computationally evaluating the anisotropic curvatures of the band edges, paving the way for their future discovery and application.

30 DIRECT ENERGY CONVERSION↗

Boron phosphide as a p-type transparent conductor: Optical absorption and transport through electron-phonon coupling

Boron phosphide has recently been identified as a potential high-hole-mobility transparent conducting material. This promise arises from its low hole effective masses. However, boron phosphide has a relatively small, 2 eV, indirect bandgap which will affect its transparency. In this study, we computationally study both optical absorption across the indirect gap and phonon-limited electronic transport to quantify the potential of boron phosphide as a p-type transparent conductor. We find that phonon-mediated indirect optical absorption is weak in the visible spectrum and that the phonon-limited hole mobility is very high (around 900 cm 2 /Vs) at room temperature. This exceptional mobility comes from the combination of a low hole effective mass and very weak scattering by polar phonon modes. We rationalize the weak scattering by the less ionic bonding in boron phosphide compared to oxides. We suggest that this could be a general advantage of nonoxides for p-type transparent conducting applications. Using our computed properties, we assess the transparent conductor figure of merit of boron phosphide and show that it exceeds by one order of magnitude that of established p-type transparent conductors, confirming the potential of this material.

36 MATERIALS SCIENCE↗

Structural and electronic properties of Sr{sub x}Ba{sub 1-x}SnO{sub 3} from first principles calculations

Neutron diffraction data for Sr{sub x}Ba{sub 1-x}SnO{sub 3} (x=0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) solid solutions were used as inputs to obtain optimized geometries and electronic properties using the density functional theory (DFT) formalism considering both the local density and generalized gradient approximations, LDA and GGA, respectively. The crystal structures and SnO{sub 6} octahedra tilting angles found after total energy minimization agree well with experiment, specially for the GGA data. Elastic constants were also obtained and compared with theoretical and experimental results for cubic BaSnO{sub 3}. While the alloys with cubic unit cell have an indirect band gap, tetragonal and orthorhombic alloys exhibit direct band gaps (exception made to x=1.0). The Kohn-Sham minimum electronic band gap oscillates from 1.52 eV (cubic x=0.0, LDA) to 2.61 eV (orthorhombic x=1.0, LDA), and from 0.74 eV (cubic BaSnO{sub 3}, GGA) to 1.97 eV (orthorhombic SrSnO{sub 3}, GGA). Parabolic interpolation of bands has allowed us to estimate the effective masses for charge carriers, which are shown to be anisotropic and larger for holes. - Graphical Abstract: Highlights: Black-Right-Pointing-Pointer DFT calculations were performed on Sr{sub x}Ba{sub 1-x}SnO{sub 3} solid solutions. Black-Right-Pointing-Pointer Calculated crystal structures agree well with experiment. Black-Right-Pointing-Pointer Alloys have direct or indirect gaps depending on the Sr molar fraction. Black-Right-Pointing-Pointer The Kohn-Sham gap variation from x=0.0 to x=1.0 is close to the experimental value. Black-Right-Pointing-Pointer Carrier effective masses are very anisotropic, specially for holes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Quark-Meson Coupling model as a description of dense matter

Quantum Hadrodynamics provides a useful framework for investigating dense matter, yet it breaks down easily when strangeness carrying baryons are introduced into the calculations, as the baryon effective masses become negative due to large meson field potentials. The Quark-Meson Coupling model overcomes this issue by incorporating the quark structure of the nucleon, thus allowing for a feedback between the the nuclei and the interaction with the meson fields. With the inclusion of this feature, QMC provides a successful description of finite nuclei and nuclear matter. We present the latest parameterization of QMC and discuss the predictions for dense nuclear matter and 'neutron' stars.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Can magnetic resonance imaging differentiate among transurethral bulking agent, urethral diverticulum, and periurethral cyst?

Purpose: To evaluate magnetic resonance imaging findings that differentiate among periurethral bulking agents (primarily collagen), urethral diverticulum, and periurethral cyst. Methods: We searched our radiologic database retrospectively from 2001 to 2017 for periurethral cystic lesions, identifying a total of 50 patients with 68 lesions. Final diagnoses in 68 lesions were bulking agents (27), urethral diverticula (29), and periurethral cysts (12). Two abdominal radiologists, blinded to clinical history, independently evaluated T1, T2, and post-contrast images. The readers assessed number, morphological features, location, connection to urethra and mass effect, signal intensity, and enhancement for each lesion. Fisher exact test and logistic regression analysis were performed for each univariate significant feature. The operative and pathologic reports were the reference standard. Results: Magnetic resonance imaging features found more often in bulking agents versus urethral diverticulum were multiple lesions (P = 0.011), upper or upper-mid-urethral location (P ≤ 0.0001), lack of internal fluid/fluid level (P = 0.002), no urethral connection (P = 0.005), T1 isointensity, and T2 mild hyperintensity compared to muscles but lower T2 signal than urine (P < 0.0001). Most cases of urethral diverticula and periurethral cysts were detected at mid- and lower urethra. Urethral diverticula were larger than bulking agents and periurethral cysts (P = 0.005 and P = 0.023) (mean diameter = 24, 16, 15 mm, respectively). Most bulking agents (93%) and urethral diverticula (90%) showed mass effect on urethra, while periurethral cysts (75%) did not (P < 0.0001). Conclusion: Signal intensity and lesion characterization on magnetic resonance imaging can significantly differentiate bulking agent from urethral diverticulum and periurethral cyst. Radiologists should consider differential diagnosis of a bulking agent, especially when distinguishing characteristics described here are present to prevent incorrect diagnosis and ultimately unnecessary surgical intervention.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Structural, optoelectronic, infrared and Raman spectra of orthorhombic SrSnO{sub 3} from DFT calculations

Orthorhombic SrSnO{sub 3} was investigated using density functional theory (DFT) considering both the local density and generalized gradient approximations, LDA and GGA, respectively. The electronic band structure, density of states, complex dielectric function, optical absorption, and the infrared and Raman spectra were computed. Calculated lattice parameters are close to the experimental measurements, and an indirect band gap E(S{yields}{Gamma})=1.97eV (2.27 eV) was obtained within the GGA (LDA) level of calculation. Effective masses for holes and electrons were estimated, being very anisotropic in comparison with similar results for orthorhombic CaSnO{sub 3}. The complex dielectric function and the optical absorption of SrSnO{sub 3} were shown to be sensitive to the plane of polarization of the incident light. The infrared spectrum between 100 and 600 cm{sup -1} was obtained, with its main peaks being assigned, and a nice agreement between experimental and theoretical peaks of the Raman spectrum of orthorhombic SrSnO{sub 3} was achieved. -- Graphical abstract: Orthorhombic SrSnO{sub 3}: a view of the unit cell (left) and plots showing the calculated and experimental Raman spectra (right). Display Omitted Research highlights: {yields} We have performed DFT calculations on orthorhombic SrSnO{sub 3} crystals, obtaining their structural, electronical and optical properties. {yields} An indirect band gap was obtained, and anisotropic effective masses were found for both electrons and holes. {yields} The complex dielectric function and the optical absorption of SrSnO{sub 3} were shown to be very sensitive to the plane of polarization of the incident light. {yields} The infrared spectrum between 100 and 600 cm{sup -1} was obtained, with its main peaks being assigned, and a nice agreement between experimental and theoretical peaks of the Raman spectrum was achieved.

36 MATERIALS SCIENCE↗

Wurtzite materials in alloys of rock salt compounds

Materials with crystal structures containing tetrahedral motifs are preferable for optoelectronic applications because they often have direct band gaps and low electron effective masses. However, crystal structures of manganese chalcogenides typically contain octahedral motifs, such as in rocksalt (RS) MnS and MnSe materials. Here we experimentally show that MnS 1-x Se x alloys with tetrahedrally-bonded wurtzite (WZ) structure can form between MnSe and MnS parent compounds with octahedral RS structures, at S-rich compositions (x<0.4) and low synthesis temperatures (~300°C). The calculated mixing enthalpies of MnS1-xSex alloys in RS and WZ structures cannot explain this experimental observation, so we hypothesize that WZ stabilization may be related to smaller structure density and lower surface energy compared to RS. The resulting WZ MnS 1-x Se x alloys have 3.0-3.2 eV optical absorption onset and lower electrical conductivity (<0.0001 S/cm) compared to the parent RS compounds. These experimental measurement result are consistent with computationally predicted band gaps and effective masses.

36 MATERIALS SCIENCE↗

Molecular dynamics and charge transport in organic semiconductors: a classical approach to modeling electron transfer

Organic photovoltaics (OPVs) are a promising carbon-neutral energy conversion technology, with recent improvements pushing power conversion efficiencies over 10%. A major factor limiting OPV performance is inefficiency of charge transport in organic semiconducting materials (OSCs). Due to strong coupling with lattice degrees of freedom, the charges form polarons, localized quasi-particles comprised of charges dressed with phonons. These polarons can be conceptualized as pseudo-atoms with a greater effective mass than a bare charge. Here we propose that due to this increased mass, polarons can be modeled with Langevin molecular dynamics (LMD), a classical approach with a computational cost much lower than most quantum mechanical methods. Here we present LMD simulations of charge transfer between a pair of fullerene molecules, which commonly serve as electron acceptors in OSCs. We find transfer rates consistent with experimental measurements of charge mobility, suggesting that this method may provide quantitative predictions of efficiency when used to simulate materials on the device scale. Our approach also offers information that is not captured in the overall transfer rate or mobility: in the simulation data, we observe exactly when and why intermolecular transfer events occur. In addition, we demonstrate that these simulations can shed light on the properties of polarons in OSCs. In conclusion, much remains to be learned about these quasi-particles, and there are no widely accepted methods for calculating properties such as effective mass and friction. Lastly, our model offers a promising approach to exploring mass and friction as well as providing insight into the details of polaron transport in OSCs.

14 SOLAR ENERGY↗

Room-temperature fabrication of a delafossite CuCrO 2 hole transport layer for perovskite solar cells

Delafossite oxides are promising hole transport layer (HTL) candidates for perovskite solar cells, due to their wide band gap, favorable energy band alignment relative to the perovskite absorber and simplicity of processing. In this paper, we investigate the properties of CuCrO2 (CCO) delafossite films using an integration of experimental and computational techniques. Phase-pure CCO films are deposited at room temperature by spin-casting suspensions of hydrothermally-synthesized nanoparticles, for use in a glass/ITO/CCO/CH3NH3PbI3/C60/BCP/Ag device structure. Although density functional theory (DFT) calculations predict an elevated hole effective mass along certain crystallographic directions, the nearly isotropic shape and small size of the CCO nanoparticles preserves transport properties within the films by randomizing particle orientation, preventing these unfavorable directions from dominating the film conductivity. Experimental measurements confirm that the CCO films display appropriate optical and electrical properties for use as an HTL, in good agreement with the DFT calculations. Solar cells made using these films exhibit stabilized power conversion efficiencies exceeding 14%, with only minor hysteresis in the current–voltage characteristics.

Dunlap-Shohl, Wiley A.↗

A practical field guide to thermoelectrics: Fundamentals, synthesis, and characterization

The study of thermoelectric materials spans condensed matter physics, materials science and engineering, and solid-state chemistry. The diversity of the participants and the inherent complexity of the topic mean that it is difficult, if not impossible, for a researcher to be fluent in all aspects of the field. This review, which grew out of a one-week summer school for graduate students, aims to provide an introduction and practical guidance for selected conceptual, synthetic, and characterization approaches and to craft a common umbrella of language, theory, and experimental practice for those engaged in the field of thermoelectric materials. This review does not attempt to cover all major aspects of thermoelectric materials research or review state-of-the-art thermoelectric materials. Rather, the topics discussed herein reflect the expertise and experience of the authors. We begin by discussing a universal approach to modeling electronic transport using Landauer theory. The core sections of the review are focused on bulk inorganic materials and include a discussion of effective strategies for powder and single crystal synthesis, the use of national synchrotron sources to characterize crystalline materials, error analysis, and modeling of transport data using an effective mass model, and characterization of phonon behavior using inelastic neutron scattering and ultrasonic speed of sound measurements. The final core section discusses the challenges faced when synthesizing carbon-based samples and the measuring or interpretation of their transport properties. We conclude this review with a brief discussion of some of the grand challenges and opportunities that remain to be addressed in the study of thermoelectrics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Operation and Performance of a Mass-Selective Cryogenic Linear Ion Trap

We report on the performance of a cryogenic 2D linear ion trap (cryoLIT) that is shown to be mass-selective in the temperature range of 17–295 K. As the cryoLIT is cooled, the ejection voltages during the mass instability scan decrease, which results in an effective mass shift to lower m/z relative to room temperature. This is attributed to a decrease in trap radius caused by thermal contraction. Additionally, the cryoLIT generates reproducible mass spectra from day-to-day, and is capable of performing stored waveform inverse Fourier transform (SWIFT) mass isolation of fragile N{sub 2}-tagged ions for the purpose of background-free infrared dissociation spectroscopy. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗