Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Influence of processing route on electrical properties of Bi{sub 4}Ti{sub 3}O{sub 12} ceramics obtained by tape-casting technology

Highlights: • Bi{sub 4}Ti{sub 3}O{sub 12} thick films were obtained by SSR and PPM methods. • Both systems crystallize in an orthorhombic structure. • Textured characteristics were evidenced. • Grain morphology affects the P–E loops. - Abstract: Bismuth titanate powders (Bi{sub 4}Ti{sub 3}O{sub 12}-BIT) were fabricated by solid state reaction (SSR) and polymeric precursor method (PPM). From these powders, Bi{sub 4}Ti{sub 3}O{sub 12} pellets were obtained by tape-casting using plate-like templates particles prepared by a molten salt method. The BIT phase crystallizes in an orthorhombic structure type with space group Fmmm. Agglomeration of the particles, which affects the densification of the ceramic, electrical conduction and leakage current at high electric fields, was monitored by transmission electronic microscopy (TEM) analyses. FEG-SEM indicated that different shape of grains of BIT ceramics was influenced by the processing route. Both SSR and PPM methods lead to unsaturated P–E loops of BIT ceramics originating from the highly c-axis orientation and high conductivity which was affected by charge carriers flowing normally to the grain boundary of the crystal lattice.

36 MATERIALS SCIENCE↗

Comparative study of changes in electrical properties of silicon and silicon carbide upon proton irradiation

Rates of carrier removal from the conduction band in n-type FZ-Si and 4H-SiC irradiated with 8- and 15-MeV protons at room temperature are discussed. Calculated rates of formation of primary radiation defects (Frenkel pairs) in these materials are presented and compared with the corresponding experimental values. Protons create defects in collision cascades involving recoil atoms formed in the crystal lattice itself. The results are compared with similar data previously obtained in irradiation of n-type FZ-Si and 4H-SiC with 900-keV electrons, in which case isolated so-called close Frenkel pairs are absolutely dominant among primary radiation defects. It has been found that the E-center model adequately describing the decrease in the electrical conductivity of n-FZ-Si upon electron irradiation is inapplicable to interpretation of experimental data for proton-irradiated materials. It is suggested that a pronounced annealing of 'simple' radiation defects of the type of close Frenkel pairs occurs during irradiation at room temperature.

36 MATERIALS SCIENCE↗

The Electrical Properties of Biphenylenes

The effect of the partial antiaromaticity of biphenylene on its substitution chemistry, its oxidation potential, and its single-molecule conductance is explored. Biphenylene and fluorene molecules with linkers of two amino groups or two cyclic thioether groups were synthesized and their conduction properties were investigated using scanning tunneling microscopy (STM) break-junction techniques and DFT calculations. Despite the partial antiaromaticity of biphenylene, which causes the biphenylenes to be much more easily oxidizable, no significant increase in molecular conductance was found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect Chemistry and Electrical Properties of (La0.8Ca0.2)(0.95)FeO3-delta

A–site deficient calcium doped lanthanum ferrite (LCF) powders are synthesized and tested to characterize their electrochemical properties for use as cathode materials in single–step co–fired solid oxide fuel cells (SOFCs). Four–probe conductivity and oxygen permeability tests show superior performance compared to conventional SOFC cathode materials. A point–defect model is applied to interpret the experimental data yielding concentrations of the predominant defects as a function of pO2 and temperature.

30 DIRECT ENERGY CONVERSION↗

Doping effects of Li-Sb content on the structure and electrical properties of [(Na{sub 0.5}K{sub 0.5}){sub 1-x}(Li){sub x}(Sb){sub x}(Nb){sub 1} {sub -x}O{sub 3}] lead-free piezoelectric ceramics

Highlights: Black-Right-Pointing-Pointer [Na{sub 0.5}K{sub 0.5}]{sub 1-x}(Li){sub x}(Sb){sub x}(Nb){sub 1-x}O{sub 3} were prepared by solid-state reaction method. Black-Right-Pointing-Pointer XRD analysis of the powder suggests the formation of a single-phase material. Black-Right-Pointing-Pointer The crystal structure changes from orthorhombic to tetragonal with increase in x. Black-Right-Pointing-Pointer Dielectric studies show a diffuse phase transition at 100 Degree-Sign C and 330 Degree-Sign C. Black-Right-Pointing-Pointer The composition x = 0.050 shows maximum remanent polarization (Pr {approx} 0.66 C m{sup -2}). -- Abstract: Ceramic samples of [Na{sub 0.5}K{sub 0.5}]{sub 1-x}(Li){sub x}(Sb){sub x}(Nb){sub 1-x}O{sub 3} (NKNLS) (x = 0.04-0.06) were prepared by high temperature solid-state reaction method. X-ray diffraction analysis of the powder samples suggests the formation of a single-phase material with transformation from orthorhombic to tetragonal crystal structure with increase in Sb content. Dielectric studies show a diffuse phase transition about 100 Degree-Sign C and another phase ferroelectric-paraelectric transition at 330 Degree-Sign C. Polarization vs. electric field (P-E) hysteresis studies show maximum remanent polarization (Pr {approx} 0.66 C m{sup -2}) for composition x = 0.05. AC conductivity in the compound increases with increase in temperature which may be attributed due to oxygen vacancies and show negative temperature coefficient of resistance (NTCR) effect.

36 MATERIALS SCIENCE↗

Structure, magnetic and electrical properties of CeIrSb and its hydride CeIrSbH{sub 0.8}

The ternary antimonide CeIrSb absorbs hydrogen under moderate temperature and pressure conditions (4 MPa and 573 K), leading to the hydride CeIrSbH{sub 0.8}. The crystal structures of both compounds have been investigated by X-ray diffraction on powders and single crystals: TiNiSi type, space group Pnma, a=735.07(7), b=456.93(4), c=792.8(1) pm, R1/wR2=0.0206/0.0395, 601 F{sup 2} values for CeIrSb and a=728.16(14), b=460.35(6), c=825.87(2) pm, R1/wR2=0.0322/0.0735, 528 F{sup 2} values for CeIrSbH{sub 0.8} with 20 variables per refinement. Hydrogenation induces both an increase of the cell volume V (+4%) and a strongly anisotropic expansion of the unit cell with a maximum of 4.3% in the c direction, leading to a significant increase of the Ce-Ir and Ce-Ce distances in this direction. The H-insertion into CeIrSb leads to a magnetic transition from intermediate valence to antiferromagnetic behavior (T{sub N}=7.0 K) evidenced by magnetization, electrical resistivity and specific heat measurements. This transition can be explained on the basis of the Doniach diagram considering the J{sub cf} interaction between the 4f(Ce) and conduction electrons. - Graphical Abstract: Cerium coordination in CeIrSb and CeIrSbH{sub 0.8}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid-state synthesis and electrical properties of polyaniline/Cu-montmorillonite nanocomposite

In this paper, the solid-state synthesis of polyaniline/Cu-montmorillonite nanocomposite is reported. Mixture of anilinium chlorure and Cu exchanged montmorillonite was grinded at room temperature while we vary the molar rate of aniline to interlayer Cu{sup 2+} cations (R) from 0.5 to 6. The properties of the hybrid compounds are characterized by X-ray diffraction, thermogravimetric analysis, SEM, FTIR and impedance spectroscopy. The results showed that the structure and the conductivity of PANI in hybrid materials depend on R. The ac conduction showed a regime of constant dc conductivity at low frequencies and a crossover to a frequency-dependent regime of the type A {omega}{sup s} at high frequencies.

36 MATERIALS SCIENCE↗

Effect of spin configurations on first-principles-calculated structure and magneto-electric properties of BiFeO{sub 3}

Here we use density functional theory calculations to study the impact of various spin configurations of magnetic ions on structure and properties of BiFeO{sub 3} (BFO). Low-spin and intermediate-spin electronic configurations of Fe in tetragonal BFO impact on the c/a ratio according to the way the t{sub 2g}/e{sub g} orbitals are filled. Such metastable structures could enhance the magnetization in BFO and couple the ferroelectric and magnetic degrees of freedom in novel ways.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of 100 MeV swift heavy ions [silver (Ag{sup 8+})] on morphological and electrical properties of polypyrrole

Polypyrrole (PPY) films were prepared by the electrochemical polymerization technique. The fully undoped samples were irradiated with different fluences ranging from 10{sup 10} to 10{sup 12} ions/cm{sup 2} of 100 MeV silver (Ag{sup 8+}) ions. In order to explain the effect of these radiations, a comparative study of samples before and after irradiation was performed by using various techniques such as surface electron microscopy, atomic force microscopy, and X-ray diffraction. With an increase in fluence, the surface structure of PPY films becomes smoother, and the conductivity increases by two orders, which has been explained in light of reordering of polymer chains. The temperature dependence of the dc conductivity of irradiated as well as unirradiated samples has been investigated at 77-300 K. The charge transport properties before and after irradiation are retained although conductivity increases. It has been proposed that swift heavy ion irradiation affects the interchain conductivity. The conductivity of irradiated samples is stable under atmospheric conditions for more than 9 months. The present investigations open up the scope for the applicability of irradiated conducting polymers as microstructures with defined conductivity for sensor applications.

36 MATERIALS SCIENCE↗

Synthesis of Cu{sub 2}O from CuO thin films: Optical and electrical properties

Hole conducting, optically transparent Cu{sub 2}O thin films on glass substrates have been synthesized by vacuum annealing (5×10{sup −6} mbar at 700 K for 1 hour) of magnetron sputtered (at 300 K) CuO thin films. The Cu{sub 2}O thin films are p-type and show enhanced properties: grain size (54.7 nm), optical transmission 72% (at 600 nm) and Hall mobility 51 cm{sup 2}/Vs. The bulk and surface Valence band spectra of Cu{sub 2}O and CuO thin films are studied by temperature dependent Hall effect and Ultra violet photo electron Spectroscopy (UPS). CuO thin films show a significant band bending downwards (due to higher hole concentration) than Cu{sub 2}O thin films.

36 MATERIALS SCIENCE↗

Study on aggregation and electric properties in the micro-region of functionalized dithieno[2, 3-b: 3′, 2′-d]thiophene (DTT) oligomers

Three kinds of 2,5,-diphenyl-dithienol[2, 3-b: 3′, 2′-d]thiophene (DP-DTT), 2,5,-distyryl-dithienol[2, 3-b: 3′, 2′-d]thiophene (DEP-DTT) and 2,5,-thienyl-dithienol[2, 3-b: 3′, 2′-d]thiophene (DET-DTT) micro-region structure and electronic properties were studied. Thin films of these functionalized DTT oligomers were prepared in a one-step drop-casting deposition onto highly oriented pyrolytic graphite substrates. The surface structure of these films was characterized by atomic force microscopy (AFM). Conducting probe atomic force microscope (C-AFM) and Kelvin probe force microscope (KFM) were both used to characterize the electronic transport behavior and surface potential distribution. The substituents of DTT oligomers can greatly affect their aggregation and the hopping conductance mechanism was used to explain the Au-DTTs-HOPG junctions. KFM investigation revealed that these oligomers with different substituents have different highest occupied molecular orbital energy levels. The corresponding theoretical analysis reveals similar result to KFM characterization. The I-V results indicated that the aggregates of molecules were the dominating factor to their micro-region electrical transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studies of the Magnetocaloric and Electrical Properties of La{sub 0.7}Er{sub 0.05}Sr{sub 0.15}Ca{sub 0.1}Mn{sub 1−x}In{sub x}O{sub 3} (0 ≤ x ≤ 0.30)

We report on the study of In substitution for Mn on the magnetic and transport properties of layered manganese oxides La{sub 0.7}Er{sub 0.05}Sr{sub 0.15}Ca{sub 0.1}Mn{sub 1−x}In{sub x}O{sub 3} (0 ≤ x ≤ 0.30) synthesized via sol-gel method. For all the samples, all peaks are satisfactorily indexed in the rhombohedra structure with R 3-bar c space group. Magnetic data, under a magnetic field of 0.05 T, revealed that our compounds exhibit a continuous (second-order) transition from a ferromagnetic (FM) to a paramagnetic (PM) state upon decreasing the temperature. Also, magnetic entropy change and relative cooling power for magnetic field variation were predicted. Then, we have fitted the experimental data of resistivity using non-linear curve fitting, a typical mathematical function (Gauss function). This function can describe the carrier transport behavior of manganites as a function of temperature around the electrical phase transition. The obtained results were discussed. These predicted parameters agree with the experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and electrical properties of organic stilbazolium single crystal of DSCHS

Organic nonlinear optical crystal 4-N, N-Dimethyl Amino-4’N’-Methyl-Stilbazolium 3-Carboxy-4-Hydroxy benzenesulfonate (DSCHS) has been successfully grown from aqueous methanol solution by adopting slow solvent evaporation technique. Chemical composition of the sample was confirmed by CHN analysis. Powder X-ray diffraction analysis was carried out and it shows that DSCHS crystal belongs to triclinic structure with Pl space group. It is found that this material exhibits positive photoconductivity. Dielectric studies were also carried out for different temperature by varying the frequency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical properties of PbTe single crystals with excess tellurium

The effects of excess (up to 0.1 at %) Te atoms and heat treatment at 473 and 573 K for 120 h on the conductivity {sigma}, thermopower {alpha}, and Hall coefficient R of PbTe single crystals are studied. It is shown that excess Te atoms and annealing strongly affect the values and character of the temperature dependences of these parameters and the signs of {alpha} and R at low temperatures, which is caused by the acceptor effect of these atoms and the formation of antisite defects due to localization of Te in vacancies of the lead sublattice upon annealing.

36 MATERIALS SCIENCE↗

Electrical properties of InAs/InGaAs quantum-dot laser heterostructures: A threshold effect

We present differential current-voltage characteristics of InGaAs/GaAs laser structures with InAs quantum dots in a quantum well and without dots. In both cases, there is a drop in differential resistance at the lasing threshold, but in the case of the quantum-dot laser the drop is incomplete, without saturation of the voltage applied to the nonlinear part of the diode. The observed current voltage behaviour is interpreted qualitatively in terms of series-connected barriers (series barriers model). (lasers)

36 MATERIALS SCIENCE↗

Composition And Electrical Properties Of Dust From Tokamak Compass

In spite of the fact that fusion is a subject of the study for many years, there are still a lot of open questions. One of the interesting topics in fusion research is a presence of dust grains in reactors. In the paper, dust grains born in tokamak Compass are studied and compared with samples of a spherical geometry and well known composition. A unique experimental setup was used for investigations of charging properties of such grains and the SEM and EDX spectroscopy was applied for a study of grain composition. We focus on the secondary emission because this process plays a prominent role when a portion of energetic electrons is present in surroundings of a particular grain. It was shown that depending on the grain size and material, energetic electrons charge the grains to positive potentials comparable with the energy of impinging electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural, magnetic and electrical properties of samarium substituted multiferroic bismuth ferrite

Polycrystalline Bi{sub 0.8}Sm{sub 0.2}FeO{sub 3} was synthesized by a simple co – precipitation route. Single phase of the prepared sample was confirmed by X-ray diffraction analysis which further reveals that it crystalizes as mixed crystal structure of rhombohedral with R3c space group and orthorhombic with Pnma space group. A considerable increase in magnetization was observed at room temperature VSM analysis and temperature dependent dielectric analysis shows an anomaly at the vicinity of Neel temperature (T{sub N}). Room temperature ferroelectric study explicitly authenticates the formation of a better loop due to the reduced leakage current and the suppression of oxygen deficiencies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructures, magnetic and electric properties of diluted magnetic semiconductors InTe{sub 1−x} Fe{sub x} (Co{sub x})

Highlights: ► The prepared InTe{sub 0.9}Fe{sub 0.1} was found to be ferromagnetic at room temperature and can be characterized as diluted magnetic semiconductors. ► The presence of staking faults, various types of defects, strained lattice, grain boundaries and the impurity of minor non-magnetic phase were suggested to participate in high temperature ferromagnetism. - Abstract: InTe compound doped by 10% of Fe or Co respectively was synthesized. X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), energy dispersive X-ray (EDX), vibrating sample magnetometer (VSM) and Kiethley electrometer were used for characterizing the prepared samples. XRD show the presence of InTe{sub 0.9}Fe{sub 0.1} or InTe{sub 0.9}Co{sub 0.1} together with minor In{sub 4}Te{sub 3} phase. InTe{sub 0.9}Fe{sub 0.1} is ferromagnetic with high Curie and high blocking temperature, while InTe{sub 0.9}Co{sub 0.1} is antiferromagnetic with two high Neels temperatures. σRT of InTe{sub 0.9}Fe{sub 0.1} and InTe{sub 0.9}Co{sub 0.1} are greater than those of InTe. The higher conductivity is due to the higher carrier's density obtained from the interaction of the sp-d orbitals, of the electric and magnetic system. The presence of In{sub 4}Te{sub 3} minor phase and different kinds of defects are taking major roles in the formation of high Tc ferromagnetism and antiferromagnetism.

36 MATERIALS SCIENCE↗