Search NASA⌕ Search

SEARCH · Search NASA

Results for “Experiment Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

The Gravity Probe B `Niobium bird' experiment: Verifying the data reduction scheme for estimating the relativistic precession of Earth-orbiting gyroscopes

Gravity Probe B (GP-B) is a relatively gyroscope experiment begun at Stanford University in 1960 and supported by NASA since 1963. This experiment will check, for the first time, the relativistic precession of an Earth-orbiting gyroscope that was predicted by Einstein's General Theory of Relativity, to an accuracy of 1 milliarcsecond per year or better. A drag-free satellite will carry four gyroscopes in a polar orbit to observe their relativistic precession. The primary sensor for measuring the direction of gyroscope spin axis is the SQUID (superconducting quantum interference device) magnetometer. The data reduction scheme designed for the GP-B program processes the signal from the SQUID magnetometer and estimates the relativistic precession rates. We formulated the data reduction scheme and designed the Niobium bird experiment to verify the performance of the data reduction scheme experimentally with an actual SQUID magnetometer within the test loop. This paper reports the results from the first phase of the Niobium bird experiment, which used a commercially available SQUID magnetometer as its primary sensor, and adresses the issues they raised. The first phase resulted in a large, temperature-dependent bias drift in the insensitive design and a temperature regulation scheme.

Uemaatsu, Hirohiko↗

Earth feature identification for onboard multispectral data editing: Computational experiments

A computational model of the processes involved in multispectral remote sensing and data classification is developed as a tool for designing smart sensors which can process, edit, and classify the data that they acquire. An evaluation of sensor system performance and design tradeoffs involves classification rates and errors as a function of number and location of spectral channels, radiometric sensitivity and calibration accuracy, target discrimination assignments, and accuracy and frequency of compensation for imaging conditions. This model provides a link between the radiometric and statistical properties of the signals to be classified and the performance characteristics of electro-optical sensors and data processing devices. Preliminary computational results are presented which illustrate the editing performance of several remote sensing approaches.

Aherron, R. M.↗

Locating Damaged Members in a Truss Structure Using Modal Test Data: a Demonstration Experiment

On-orbit assessment of large flexible space truss structures can be accomplished, in principle, with dynamic response information, structural identification methods, and model correlation techniques which produce an adjusted mathematical model. In a previously developed approach for damage location, an optimal update of the structure model is formed using the response data, then examined to locate damaged members. An experiment designed to demonstrate and verify the performance of the on-orbit assessment approach uses a laboratory scale model truss structure which exhibits characteristics expected for large space truss structures. Vibration experiments were performed to generate response data for the damaged truss. The damage location approach, analytical work performed in support of the vibration tests, the measured response of the test article, and some preliminary results are described.

Smith, Suzanne Weaver↗

Data catalog of satellite experiments

This catalog is divided into three sections: data description contains descriptions of data available at or through NSSDC as well as descriptions of the experiments and spacecraft from which the data originated; and supporting data contains brief descriptions of space environment models and programs distributed by NSSDC. Section 3 is a series of indexes that contain: (1) a listing of all spacecraft, experiment, and data descriptions presented in Section 1 plus tables indicating the period for which each spacecraft was operational; (2) an index of all spacecraft described here, identified by common names and alternate names; (3) a listing of the original experiment institutions for all experiments described; (4) a listing of the investigators associated with the experiments and their current affiliations; and (5) an index of all experiments sorted by phenomenon measured.

Source record↗

Multidimensional analysis of data obtained in experiments with X-ray emulsion chambers and extensive air showers

Nonparametric statistical methods are used to carry out the quantitative comparison of the model and the experimental data. The same methods enable one to select the events initiated by the heavy nuclei and to calculate the portion of the corresponding events. For this purpose it is necessary to have the data on artificial events describing the experiment sufficiently well established. At present, the model with the small scaling violation in the fragmentation region is the closest to the experiments. Therefore, the treatment of gamma families obtained in the Pamir' experiment is being carried out at present with the application of these models.

Chilingaryan, A. A.↗

Locating damaged members in a truss structure using modal test data - A demonstration experiment

An experiment is designed to demonstrate and verify the performance of the on-orbit assessment approach for large flexible space truss structures. The on-orbit assessment approach can be accomplished, in principle, with dynamic response information, structural identification methods, and model correlation techniques which produce an adjusted mathematical model. An optimal update of the structure model is formed using the response data, then examined to locate damaged members. The experiment uses a laboratory scale model truss structure which exhibits characteristics expected for large space truss structures. Vibration experiments are performed to generate response data for the damaged truss. The damage location approach is described, as well as analytical work performed in support of the vibration tests, the measured response of the test article, and some preliminary results.

Smith, Suzanne Weaver↗

A versatile ground data display system for Spacelab experiments

A microprocessor-based data capture and display system suited to the needs of many Spacelab experimenters is described. Although developed specifically for the needs of the FAUST UV astronomy telescope, several features of the system may make it attractive to other groups who need to interact with their Spacelab data in real or near-real time. The display system captures data from the serial data stream originating in the Spacelab experiment computer input/output (ECIO) data channel, and can reformat and display several hundred variables per second in real time. The system offers a combination of CRT display and analog paper strip-chart output. A facility is also provided for simultaneously creating floppy-disk records of short segments of data according to prearranged criteria, to allow detailed examination of critical events in the operation of the experiment. The simplicity, economy, reliability, and flexibility of the display system suggest its use for monitoring a variety of low- and medium-data-rate Spacelab experiments.

Werthimer, D.↗

Characteristics of the earth's radiation budget derived from the first year of data from the Earth Radiation Budget Experiment

The first year of broadband Earth Radiation Budget Experiment (ERBE) data is analyzed for top-of-the-atmosphere regional variations of outgoing longwave (LW) flux and planetary albedo for total scene as well as clear-sky conditions. The annual variation of radiative parameters is examined for February 1985 through January 1986 for selected regions, latitude zones, and the entire globe. Results show significant seasonal variations for both LW fluxes and albedo. A broad longwave flux maximum (with a relative minimum corresponding to the intertropical convergence zone in the middle) covers the tropics and the subtropics with its center moving about 20 deg in latitude between seasonal extremes. Minimum albedo (about 20 percent) occurs within 15 deg of the equator. In the tropics and midlatitudes, there is a tendency toward higher albedos during the summer. Larger albedos at the higher latitudes are caused by solar zenith angle effects and by increased snow and ice cover. Net warming occurs between 35 deg N and 35 deg S latitude near the equinoxes and in a 90-deg-wide latitude band at the solstices centered around 35 deg latitude in the summer hemisphere. This energy surplus at lower latitudes coupled with an energy deficit in the poleward regions is the primary driver of atmospheric circulations. For the year, the global net radiation is nearly in balance.

Gibson, G. G.↗

Thermal control surfaces experiment: Initial flight data analysis

The behavior of materials in the space environment continues to be a limiting technology for spacecraft and experiments. The thermal control surfaces experiment (TCSE) aboard the Long Duration Exposure Facility (LDEF) is the most comprehensive experiment flown to study the effects of the space environment on thermal control surfaces. Selected thermal control surfaces were exposed to the LDEF orbital environment and the effects of this exposure were measured. The TCSE combined in-space orbital measurements with pre and post-flight analyses of flight materials to determine the effects of long term space exposure. The TCSE experiment objective, method, and measurements are described along with the results of the initial materials analysis. The TCSE flight system and its excellent performance on the LDEF mission is described. A few operational anomalies were encountered and are discussed.

Wilkes, Donald R.↗

Science Data Report for the Optical Properties Monitor (OPM) Experiment

This science data report describes the Optical Properties Monitor (OPM) experiment and the data gathered during its 9-mo exposure on the Mir space station. Three independent optical instruments made up OPM: an integrating sphere spectral reflectometer, vacuum ultraviolet spectrometer, and a total integrated scatter instrument. Selected materials were exposed to the low-Earth orbit, and their performance monitored in situ by the OPM instruments. Coinvestigators from four NASA Centers, five International Space Station contractors, one university, two Department of Defense organizations, and the Russian space company, Energia, contributed samples to this experiment. These materials included a number of thermal control coatings, optical materials, polymeric films, nanocomposites, and other state-of-the-art materials. Degradation of some materials, including aluminum conversion coatings and Beta cloth, was greater than expected. The OPM experiment was launched aboard the Space Shuttle on mission STS-81 in January 1997 and transferred to the Mir space station. An extravehicular activity (EVA) was performed in April 1997 to attach the OPM experiment to the outside of the Mir/Shuttle Docking Module for space environment exposure. OPM was retrieved during an EVA in January 1998 and was returned to Earth on board the Space Shuttle on mission STS-89.

Wilkes, D. R.↗

The Delaware River Basin Landsat-Data Collection System Experiment

The author has identified the following significant results. This experiment successfully demonstrated that standard U.S. Geological Survey field instrumentation could be easily interfaced with the LANDSAT-DCS and the data made to flow smoothly to water resources management agencies. The experiment was conducted in the Delaware River basin. A truly operational system could not be deployed.

Paulson, R. W.↗

Experimental philosophy leading to a small scale digital data base of the conterminous United States for designing experiments with remotely sensed data

Research using satellite remotely sensed data, even within any single scientific discipline, often lacked a unifying principle or strategy with which to plan or integrate studies conducted over an area so large that exhaustive examination is infeasible, e.g., the U.S.A. However, such a series of studies would seem to be at the heart of what makes satellite remote sensing unique, that is the ability to select for study from among remotely sensed data sets distributed widely over the U.S., over time, where the resources do not exist to examine all of them. Using this philosophical underpinning and the concept of a unifying principle, an operational procedure for developing a sampling strategy and formal testable hypotheses was constructed. The procedure is applicable across disciplines, when the investigator restates the research question in symbolic form, i.e., quantifies it. The procedure is set within the statistical framework of general linear models. The dependent variable is any arbitrary function of remotely sensed data and the independent variables are values or levels of factors which represent regional climatic conditions and/or properties of the Earth's surface. These factors are operationally defined as maps from the U.S. National Atlas (U.S.G.S., 1970). Eighty-five maps from the National Atlas, representing climatic and surface attributes, were automated by point counting at an effective resolution of one observation every 17.6 km (11 miles) yielding 22,505 observations per map. The maps were registered to one another in a two step procedure producing a coarse, then fine scale registration. After registration, the maps were iteratively checked for errors using manual and automated procedures. The error free maps were annotated with identification and legend information and then stored as card images, one map to a file. A sampling design will be accomplished through a regionalization analysis of the National Atlas data base (presently being conducted). From this analysis a map of homogeneous regions of the U.S.A. will be created and samples (LANDSAT scenes) assigned by region.

Labovitz, M. L.↗

A zero-error operational video data compression system

A data compression system has been operating since February 1972, using ATS spin-scan cloud cover data. With the launch of ITOS 3 in October 1972, this data compression system has become the only source of near-realtime very high resolution radiometer image data at the data processing facility. The VHRR image data are compressed and transmitted over a 50 kilobit per second wideband ground link. The goal of the data compression experiment was to send data quantized to six bits at twice the rate possible when no compression is used, while maintaining zero error between the transmitted and reconstructed data. All objectives of the data compression experiment were met, and thus a capability of doubling the data throughput of the system has been achieved.

Kutz, R. L.↗

Radar analyses of mesoscale meteorological phenomena during the AVE/VAS correlation field experiment

Radar data were collected during the selected critical times of the field experiment and subsequently analyzed for specific items. The analyses of the radar data for the AVE/VAS experiment provided statistically significant values for each of the 10 Km by 10 Km grids within radar range. The resulting information for correlation with satellite data included the following derived items that were averaged for each grid area: (1) rainfall rate in mm/hr; (2) dBZ (reflectivity) values; (3) accumulated rainfall values per hour; (4) accumulated rainfall values for a 6-hour period; (5) vertically integrated liquid water content per square meter; and (6) vertical height of the radar axis at the midpoint of each grid. Additional products derived from radar data are being investigated. An example of one such product is the derivation of the errors in integrated rainfall with different sampling periods. This is of significance for correlation with satellite data in that normally a step-function type of rainfall rate is used to derive the total rainfall over a period.

Huebner, G. L.↗

Reduction and analysis of data collected during the electromagnetic tornado experiment

Techniques for data processing and analysis are described to support tornado detection by analysis of radio frequency interference in various frequency bands, and sea state determination from short pulse radar measurements. Activities include: strip chart recording of tornado data; the development and implementation of computer programs for digitalization and analysis of the data; data reduction techniques for short pulse radar data, and the simulation of radar returns from the sea surface by computer models.

Davisson, L. D.↗