Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fast Pyrolysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Flow Reactor Study of the Soot Precursors of Novel Cycloalkanes as Synthetic Jet Fuel Compounds: Octahydroindene, p -Menthane, and 1,4-Dimethylcyclooctane

Sustainable aviation fuels (SAFs) or Synthetic aviation turbine fuels (SATFs) derived from nonpetroleum sources are essential for energy security and a strong rural and agricultural economy. Airplanes operating on SAF can have lower particle emissions compared to those of conventional jet fuel, reducing air quality impacts near airports. Processing biobased isoprene or wood and agricultural waste can produce cycloalkane-rich fuels with properties meeting ASTM International’s SATF requirements. The unique structures of these cycloalkanes yield lower soot emissions because of their lack of aromatic rings. We measured the soot formation tendency as yield sooting index (YSI) and used laminar flow reactor experiments to evaluate soot precursors formed for isoprene-derived compounds p-menthane and 1,4-dimethylcyclooctane (DMCO), and octahydroindene (OHI)─ produced from woody biomass via catalytic fast pyrolysis. The combustion chemistry of the OHI and DMCO has not been previously studied. Experiments were conducted at 10 bar from 800 to 1200 K, equivalence ratios of 1.0 and 3.0, and residence times of 1.0 and 0.6 s, respectively. Experimentally detected species were used to elucidate the mechanisms of soot precursor formation. OHI exhibited the highest YSI (94.5) and formed a high concentration of benzene primarily by direct dehydrogenation of the six-membered ring. p-Menthane (YSI 92.0) and DMCO (YSI 85.0) oxidation products included fewer aromatic components but higher benzene precursors, including 1,3-butadiene, propyne, and allene. This suggests that the ring-opening pathway is dominant over the dehydrogenation pathway in the benzene formation for these compounds. This experimental speciation provides insight into the influence of the cycloalkane structure on the sooting tendencies of potential SAF blend components, thereby aiding in fuel design processes.

09 BIOMASS FUELS↗

Compatibility Assessment of Fuel System Infrastructure Plastics with Bio-oil and Diesel Fuel

We report that bio-oil derived via fast pyrolysis is being developed as a renewable fuel option for petroleum distillates. The compatibility of neat bio-oil with 18 plastic types was evaluated using neat diesel fuel as the baseline. The plastic materials included polyphenylene sulfide (PPS), polyethylene terephthalate (PET), polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF), polyoxymethylene (POM), POM copolymer, high density polyethylene (HDPE), polybutylene terephthalate (PBT), polypropylene (PP), polyethylene terephthalate glycol (PETG), polythiourea (PTU), four nylon grades, and four thermosetting resins. Specimens of each material were immersed in the test fuels for a period of 16 weeks to achieve full saturation. Except for PP and HDPE, the plastic materials underwent higher volume expansion in bio-oil than in the baseline diesel (which was negligible in most cases). This volume increase corresponds to the higher polarity of the bio-oil. PPS, PET, and PTFE were unaffected by bio-oil exposure, but modest swelling (between 2 and 5%) occurred for the two acetals (POM and POM copolymer), Nylon-12, PBT, PETG, and the four resin grades. More moderate swelling (8–15%) was noted for Nylon-6, Nylon-6/6, and Nylon-11, and excessive swell (>40%) occurred for PTU. The nonpolar nature of PP and HDPE matches that of diesel, leading to higher solubility (swell) in this fuel type. Finally, the relatively low volume expansion following exposure indicates that many of the existing infrastructure plastics (excluding PTU) should be suitable for use with bio-oil.

09 BIOMASS FUELS↗

Biofuel Options for Marine Applications: Technoeconomic and Life-Cycle Analyses

This study performed technoeconomic and life-cycle analyses to assess the economic feasibility and emission benefits and tradeoffs of various biofuel production pathways as an alternative to conventional marine fuels. We analyzed production pathways for (1) Fischer-Tropsch diesel from biomass and cofeeding biomass with natural gas or coal, (2) renewable diesel via hydroprocessed esters and fatty acids from yellow grease and cofeeding yellow grease with heavy oil, and (3) bio-oil via fast pyrolysis of low-ash woody feedstock. We also developed a new version of the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) marine fuel module for the estimation of life-cycle greenhouse gas (GHG) and criteria air pollutant (CAP) emissions of conventional and biobased marine fuels. The alternative fuels considered have a minimum fuel selling price between 2.36 and 4.58 $/heavy fuel oil gallon equivalent (HFOGE), and all exhibit improved life-cycle GHG emissions compared to heavy fuel oil (HFO), with reductions ranging from 40 to 93%. The alternative fuels also exhibit reductions in sulfur oxides and particulate matter emissions. Additionally, when compared with marine gas oil and liquified natural gas, they perform favorably across most emission categories except for cases where carbon and sulfur emissions are increased by the cofed fossil feedstocks. The pyrolysis bio-oil offers the most promising marginal CO2 abatement cost at less than $100/tonne CO2e for HFO prices >$1.09/HFOGE followed by Fischer-Tropsch diesel from biomass and natural gas pathways, which fall below $100/tonne CO2e for HFO prices >$2.25/HFOGE. Pathways that cofeed fossil feedstocks with biomass do not perform as well for marginal CO2 abatement cost, particularly at low HFO prices. This study indicates that biofuels could be a cost-effective means of reducing GHG, sulfur oxide, and particulate matter emissions from the maritime shipping industry and that cofeeding biomass with natural gas could be a practical approach to smooth a transition to biofuels by reducing alternative fuel costs while still lowering GHG emissions, although marginal CO2 abatement costs are less favorable for the fossil cofeed pathways.

Greenhouse gas, life cycle assessment, techno-econ↗

Group Additivity Determination for Oxygenates, Oxonium Ions, and Oxygen-Containing Carbenium Ions

Bio-oil produced from biomass fast pyrolysis often requires catalytic upgrading to remove oxygen and acidic species over zeolite catalysts. The elementary reactions in the mechanism for this process involve carbenium and oxonium ions. In order to develop a detailed kinetic model for the catalytic upgrading of biomass, rate constants are required for these elementary reactions. The parameters in the Arrhenius equation can be related to thermodynamic properties through structure-reactivity relationships, such as the Evans-Polanyi relationship. For this relationship, enthalpies of formation of each species are required, which can be reasonably estimated using group additivity. However, the literature previously lacked group additivity values for oxygenates, oxonium ions, and oxygen-containing carbenium ions. In this work, 71 group additivity values for these types of groups were regressed, 65 of which had not been reported previously and six of which were newly estimated based on regression in the context of the 65 new groups. Heats of formation based on atomization enthalpy calculations for a set of reference molecules and isodesmic reactions for a small set of larger species for which experimental data was available were used to demonstrate the accuracy of the Gaussian-4 quantum mechanical method in estimating enthalpies of formation for species involving the moieties of interest. Isodesmic reactions for a total of 195 species were constructed from the reference molecules to calculate enthalpies of formation that were used to regress the group additivity values. The results showed an average deviation of 1.95 kcal/mol between the values calculated from Gaussian-4 and isodesmic reactions versus those calculated from the group additivity values that were newly regressed. Importantly, the new groups enhance the database for group additivity values, especially those involving oxonium ions.

09 BIOMASS FUELS↗

Establishing the Role of Metal, Interface, and Vacancy Sites in Pt/TiO 2 -Catalyzed Acetic Acid Hydrodeoxygenation

Catalytic hydrodeoxygenation (HDO) following catalytic fast pyrolysis (CFP) offers an approach to convert the vapor-phase product of biomass pyrolysis to a stable bio-oil product by reducing the oxygen content. Fundamental insights into the HDO of carboxylic acids, which are a corrosive and acidic CFP product, on promising catalyst materials, such as Pt/TiO 2 , are needed to inform the design of multifunctional HDO catalysts with improved carbon efficiency. In this contribution, density functional theory (DFT) calculations were used to assess the role of Pt-metal and Pt-TiO 2 -interface sites on acetic acid HDO (AA-HDO), and to determine the effect of interfacial oxygen vacancies at the Pt-TiO 2 interface, by calculating the reaction energetics for key AA-HDO surface intermediates and elementary steps on each site type. Pt-metal sites, modeled via Pt(111), preferred to form undesired decarboxylation products (CH 4 and CO 2 ), whereas Pt-TiO 2 -interface sites, modeled via an anatase-supported Pt nanowire, favored the formation of desired deoxygenation products (acetaldehyde and ethane). Interfacial-vacancy sites lowered the activation energy barrier for the first C-O bond-scission step in AA-HDO, predicted to be the rate-limiting step for AA-HDO at the Pt-TiO 2 interface in the absence of a vacancy. These atomistic insights reveal the importance of metal-metal oxide interface sites in AA-HDO selectivity and can be used to inform the rational design of improved HDO catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic Stability of Molybdenum Oxycarbides Formed from Orthorhombic Mo 2 C in Oxygen-Rich Environments

Molybdenum carbide (Mo 2 C) nanoparticles and thin films are particularly suitable catalysts for catalytic fast pyrolysis (CFP) as they are effective for deoxygenation and can catalyze certain reactions that typically occur on noble metals. Oxygen deposited during deoxygenation reactions may alter the carbide structure, leading to the formation of oxycarbides, which can determine changes in catalytic activity or selectivity. Despite emerging spectroscopic evidence of bulk oxycarbides, so far there have been no reports of their precise atomic structure or their relative stability with respect to orthorhombic Mo 2 C. This knowledge is essential for assessing the catalytic properties of molybdenum (oxy)carbides for CFP. In this article, we use density functional theory (DFT) calculations to (a) describe the thermodynamic stability of surface and subsurface configurations of oxygen and carbon atoms for a commonly studied Mo-terminated surface of orthorhombic Mo 2 C and (b) determine atomic structures for oxycarbides with a Mo:C ratio of 2:1. The surface calculations suggest that oxygen atoms are not stable under the top Mo layer of the Mo 2 C(100) surface. Coupling DFT calculations with a polymorph sampling method, we determine (Mo 2 C) x O y oxycarbide structures for a wide range of oxygen compositions. Oxycarbides with lower oxygen content (y/x = 2) adopt layered structures reminiscent of the parent carbide phase, with flat Mo layers separated by layers of oxygen and carbon; for higher oxygen content, our results suggest the formation of amorphous phases, as the atomic layers lose their planarity with increasing oxygen content. We characterize the oxidation states of Mo in the oxycarbide structures determined computationally, and simulate their X-ray diffraction (XRD) patterns in order to facilitate comparisons with experiments. Our study may provide a platform for large-scale investigations of the catalytic properties of oxycarbides and their surfaces and for tailoring the catalytic properties for different desired reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and computational investigation of acetic acid deoxygenation over oxophilic molybdenum carbide: Surface chemistry and active site identity

Ex situ catalytic fast pyrolysis (CFP) is a promising route for producing fungible biofuels; however, this process requires bifunctional catalysts that favor C–O bond cleavage, activate hydrogen at near atmospheric pressure and high temperature (350–500 °C), and are stable under high-steam, low hydrogen-to-carbon environments. Recently, early transition-metal carbides have been reported to selectively cleave C–O bonds of alcohols, aldehydes, and oxygenated aromatics, yet there is limited understanding of the metal carbide surface chemistry under reaction conditions and the identity of the active sites for deoxygenation. In this study, we evaluated molybdenum carbide (Mo 2 C) for the deoxygenation of acetic acid, an abundant component of biomass pyrolysis vapors, under ex situ CFP conditions, and we probed the Mo 2 C surface chemistry, identity of the active sites, and deoxygenation pathways using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Chemistry and Particle Morphology Changes in Pine Biomass under Indirect Thermal Gradients: Implications for Feed Screw Design

The conversion of biomass feedstocks into fuels and chemicals using fast pyrolysis is a promising approach to renewable energy. Feed screws that convey biomass to pyrolysis reactors, however, often encounter plugging. Indirect heating of the feed screw occurs due to contact with the pyrolysis chamber, resulting in a heating gradient ranging from ambient temperature (22 °C) to reactor temperature (500 °C). Given that major cell wall macromolecules, such as lignin, cellulose, and hemicellulose, begin to produce bio-oils and volatile resin acid compounds within this temperature gradient, we hypothesized that indirect heating during feed screw conveyance is sufficient to cause premature degradation of biomass. We characterized this degradation by observing increases in surface roughness, changes in overall particle morphology, and the production and deposition of bio-oils on biomass particle surfaces. Correlative analysis between optical in situ hot-stage microscopy, confocal Raman spectroscopy, and SEM analysis revealed that heating at temperatures as low as 375 °C caused significant increases in surface roughness, with large fissures forming between and within cell walls. Additionally, droplets of bio-oil were observed on particles, especially in the bark and cambium samples. This work suggests that these phenomena contribute to particle agglomeration, leading to feed screw plugging, and that engineering a solution to cool the feed screw could prevent particle agglomeration and reduce plugging incidents, thereby increasing biomass processing efficiency.

09 BIOMASS FUELS↗

Bio-oil Stabilization by Hydrogenation over Reduced Metal Catalysts at Low Temperatures

Biomass fast pyrolysis integrated with bio-oil upgrading represents a very attractive approach for converting biomass to hydrocarbon transportation fuels. However, the thermal and chemical instability of bio-oils presents significant problems when they are being upgraded, and development of effective approaches for stabilizing bio-oils is critical to the success of the technology. Catalytic hydrogenation to remove reactive species in bio-oil has been considered as one of the most efficient ways to stabilize bio-oil. This paper provides a fundamental understanding of hydrogenation of actual bio-oils over a Ru/TiO2 catalyst under conditions relevant to practical bio-oil hydrotreating processes. Bio-oil feed stocks, bio-oils hydrogenated to different extents, and catalysts have been characterized to provide insights into the chemical and physical properties of these samples and to understand the correlation of the properties with the composition of the bio-oil and catalysts. The results indicated hydrogenation of various components of the bio-oil, including sugars, aldehydes, ketones, alkenes, aromatics, and carboxylic acids, over the Ru/TiO2 catalyst and 120 to 160oC. Hydrogenation of these species significantly changed the chemical and physical properties of the bio-oil and overall improved its thermal stability, especially by reducing the carbonyl content, which represented the content of the most reactive species (i.e., sugar, aldehydes, and ketones). The change of content of each component in response to increasing hydrogen additions suggests the following bio-oil hydrogenation reaction sequence: sugar conversion to sugar alcohols, followed by ketone and aldehyde conversion to alcohols, followed by alkene and aromatic hydrogenation, and then followed by carboxylic acid hydrogenation to alcohols. Hydrogenation of bio-oil samples with different sulfur contents or inorganic material contents suggested that sulfur poisoning of the reduced Ru metal catalysts was significant during hydrogenation; however, the inorganics at low concentrations had minimal impact at short times on stream, indicating that sulfur poisoning was the primary deactivation mode for the bio-oil hydrogenation catalyst. Reducing the sulfur content in bio-oil could significantly increase the lifetime of the hydrogenation catalyst used. The knowledge gained during this work will allow rational design of more effective catalysts and processes for stabilizing and upgrading bio-oils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Conversion of Bamboo Sawdust over ZrO 2 –CeO 2 /γ-Al 2 O 3 to Produce Ketonic Hydrocarbon Precursors and Furans

Here, a series of metal oxides including ZrO 2 /γ-Al 2 O 3 , CeO 2 /γ-Al 2 O 3 , and ZrO 2 –CeO 2 /γ-Al 2 O 3 were synthesized and employed to conduct catalytic fast pyrolysis of bamboo sawdust via an analytical pyrolyzer/gas chromatograph/mass spectrometer (Py-GC/MS) to produce hydrocarbon precursors such as ketones and furans. Experimental results illustrated that the use of metal oxides enhanced the formation of ketones and monoaromatic hydrocarbons compared to catalyst-free trial. Among the metal oxides, ZrO 2 –CeO 2 /γ-Al 2 O 3 exhibited the most significant ketonization and aldol condensation activities yielding the highest concentration of linear and cyclic ketones. In addition, nonacidic oxygenates such as furfural, acetol, butanedial, 2,3-dihydrobenzofuran, and methyl acetate, were efficiently converted into hydrocarbon precursors over metal oxides. A dual catalytic bed system integrating ZrO 2 –CeO 2 /γ-Al 2 O 3 and HZSM-5 significantly facilitated the production of aromatic hydrocarbons compared to pure HZSM-5 catalytic run. The use of ZrO 2 –CeO 2 /γ-Al 2 O 3 mixed with HZSM-5 mode maximized the formation of xylenes, while ZrO 2 –CeO 2 /γ-Al 2 O 3 mixed with bamboo sawdust catalytic trial increased the concentration of benzene, toluene, and alkylbenzenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Hydroprocessing of Chemical Models for Bio-oil

Bio-oil (product liquids from fast pyrolysis of biomass) is a complex mixture of oxygenates derived from the thermal breakdown of the bio-polymers in biomass. In the case of lignocellulosic biomass, the structures of three major components, cellulose, hemicellulose and lignin, are well represented by the bio-oil components. In order to study the chemical mechanisms of catalytic hydroprocessing of bio-oil, three model compounds were chosen to represent those components. Guaiacol represents the large number of mono- and di-methoxy phenols found in bio-oil derived from softwood or hardwood, respectively. Furfural represents a major pyrolysis product group from cellulosics. Acetic acid is a major product from biomass pyrolysis, derived from the hemicellulose, which has important impacts on the further processing of the bio-oil because of the acidic character. These three compounds were processed using palladium or ruthenium catalyst over a temperature range from 150°C to 300°C. The batch reactor was sampled during each test over a period of four hours. The samples were analyzed by gas chromatography with both a mass selective detector and a flame ionization detector. The products were determined and the reaction pathways for their formation are suggested based on these results. Both temperature and catalyst metal have significant effects on the product composition.

09 BIOMASS FUELS↗

Study of the Neutralization and Stabilization of a Mixed Hardwood Bio-Oil

Fast-pyrolysis bio-oil that is currently produced from lignocellulosic biomass in demonstration and semicommercial plants requires significant modification to become an acceptable transportation fuel. The high acidity and chemical instability of bio-oils render them incompatible with existing petroleum refinery processes that produce gasoline and diesel fuels. To facilitate the use of bio-oil as a feedstock in a traditional refinery infrastructure, there is considerable interest in upgrading bio-oils through chemical pathways that include converting the carboxylic acids and reactive carbonyl compounds into esters and acetals using low-cost alcohols. In this article, we discuss our observations with different approaches to esterification and etherification chemistry using a crude bio-oil derived from mixed hardwoods. The high water content in crude bio-oils (ca. 20?30%) creates equilibrium limitations in the condensation reactions that hamper the upgrading process in that the neutralization and stabilization steps cannot easily be driven to completion. The lowest acid number that we were able to obtain without causing serious degradation of the flow properties of the bio-oil had a total acid number of about 20, a value that is still too high for use in a traditional petroleum refinery.

09 BIOMASS FUELS↗

Hydroprocessing Bio-oil and Products Separation for Coke Production

Fast pyrolysis of biomass can be used to produce a raw bio-oil product, which can be upgraded by catalytic hydroprocessing to hydrocarbon liquid products. In this study the upgraded products were distilled to recover light naphtha and oils and to produce a distillation resid with useful properties for coker processing and production of renewable, low-sulfur electrode carbon. For this hydroprocessing work, phase separation of the bio-oil was applied as a preparatory step to concentrate the heavier, more phenolic components thus generating a more amenable feedstock for resid production. Low residual oxygen content products were produced by continuous-flow, catalytic hydroprocessing of the phase separated bio-oil.

bio-oil↗

Early-Stage Evaluation of Catalyst Manufacturing Cost and Environmental Impact Using CatCost

The costs and environmental impacts of catalyst manufacture are often neglected during early-stage research because of a lack of accessible, standardized tools to assess them. Here we report the key features of CatCost, a free and public estimation tool for the evaluation of catalyst cost. We demonstrate its functionality with a case study of diverse catalysts (ZSM-5, Pt/TiO2 and Mo2C) for the catalytic fast pyrolysis of biomass. We quantified the economic and environmental improvements made by replacing circulating-bed ZSM-5 with more stable, fixed-bed Pt/TiO2 and Mo2C catalysts, while revealing the effects of synthesis methods and production scale on catalyst costs. The manufacture of ZSM-5 had a large processing cost contribution that was strongly scale dependent, whereas the costs of the other catalysts were dominated by raw materials at all scales. Furthermore, while ZSM-5 costs the least per kilogram, the more stable catalysts cost half as much per gallon of fuel.

BIOMASS FUELS,ENERGY PLANNING, POLICY, AND ECONOMY↗

Catalytic Upgrading of bio-oil using 1-octene and 1-butanol over sulfonic acid resin catalysts

Raw bio-oil from fast pyrolysis of biomass must be refined before it can be used as a transporation fuel, a petroleum refinery feed or for many other fuel uses. Raw bio-oil was upgraded with the neat model olefin, 1-octene, and with 1-octene/1-butanol mixtures over sulfonic acid resin catalysts frin 80 to 150 degrees celisus in order to simultaneously lower water content and acidity and to increase hydrophobicity and heating value. Phase separation and coke formation were key factors limiting the reaction rate during upgrading with neat 1-octene although octanols were formed by 1-octene hydration along with small amounts of octyl acetates and ethers. GC-MS analysis confirmed that olefin hydration, carboxylic acid esterification, acetal formation from aldehydes and ketones and O- and C-alkylations of phenolic compounds occurred simultaneously during upgrading with 1-octene/1-butanol mixtures. Addition of 1-butanol increased olefin conversion dramatically be reducing mass transfer restraints and serving as a cosolvent or emulsifying agent. It also reacted with carboxylic acids and aldehydes/ketones to form esters, and acetals, respectively, while also serving to stabilize bio-oil during heating. 1-Butanol addition also protected the catalysts, increasing catalyst lifetime and reducing or eliminationg coking. Upgrading sharply increased ester content and decreased the amounts of levoglucosan, polyhydric alcohols and organic acids. Upgrading lowered acidity (pH value rise from 2.5 to >3.0), removed the uppleasant ordor and increased hydrocarbon solubility. Water content decreased from 37.2% to < 7.5% dramatically and calorific value increased from 12.6 MJ kg to about 30.0 MJ kg.

Zhang, Zhijun↗

A Review and Perspective of Recent Bio-Oil Hydrotreating Research

The pathway for catalytic hydrodeoxygenation of biomass derived fast pyrolysis oil represents a compelling route for production of liquid transportation fuels. There has been continued progress and advancements in both the public and private research areas towards driving this technology to completion. Published research and patent literature have demonstrated that continued development of HDO as a part of a processes for production liquid transportation using biomass is being advanced for both fuel blend stocks and for refinery intermediates for co-processing. Much of the research has still focused on “quality” metrics around single or groups of unit operations generating partially treated bio-oil streams without assessing upstream and downstream implications. However, there is an encouraging amount of research that is now being targeted and assessed with attempts to understand the impact on the final fuel product, regardless of the route. Much of the most important research is moving towards continuous, industrially relevant processes where data can be generated to adequately inform process and economic modeling. As the technology for producing liquid transportation fuels from pyrolysis/HDO/coprocessing is driving towards commercialization, further research should be prioritized on the basis of impact to a techno-economic analyses.

bio-oil↗