Life detection by visual imaging.
Life detection on Mars by visual techniques, discussing imaging devices, filters, shutters and microscopy
IMAGING TECHNIQUE↗
SEARCH · Search NASA
Results for “Filtering techniques”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Doppler lidar wind measurement with the edge technique
The edge technique is a new and powerful method for measuring small frequency shifts. Range resolved lidar measurements of winds can be made with high accuracy and high vertical resolution using the edge technique to measure the Doppler shift of an atmospheric backscattered signal from a pulsed laser. The edge technique can be used at near-infrared or visible wavelengths using well developed solid state lasers and detectors with various edge filters. In the edge technique, the laser frequency is located on the steep slope of the spectral response function of a high resolution optical filter. Due to the steep slope of the edge, very small frequency shifts cause large changes in measured signal. The frequency of the outgoing laser pulse is determined by measuring its location on the edge of the filter. This is accomplished by sending a small portion of the beam to the edge detection setup where the incoming light is split into two channels - an edge filter and an energy monitor channel. The energy monitor signal is used to normalize the edge filter signal for magnitude. The laser return backscattered from the atmosphere is collected by a telescope and directed through the edge detection setup to determine its frequency (location on the edge) in a similar manner for each range element. The Doppler shift, and thus the wind, is determined from a differential measurement of the frequency of the outgoing laser pulse and the frequency of the laser return backscattered from the atmosphere. We have conducted simulations of the performance of an edge lidar system using an injection seeded pulsed Nd:YAG laser at 1.06 microns. The central fringe of a Fabry-Perot etalon is used as a high resolution edge filter to measure the shift of the aerosol return.
Korb, C. Laurence↗
Thin aluminum filters for use on the Apollo Telescope Mount XUV spectrographs
Thin, unbacked, aluminum film filters were used on two extreme ultraviolet (XUV) instruments flown on the Apollo Telescope Mount of Skylab by the Naval Research Laboratory to transmit the XUV radiation while blocking the longer wavelength radiation that would saturate the detector. The requirements placed on these filters - large size, resistance to degradation by high acoustic and vibration fields, and low pinhole transmittances - were far more severe than those placed on any filters previously flown. Special techniques were developed for vacuum evaporation of the aluminum, removal of the films from the substrates, supporting the films and mounting them to obtain finished filters, and storing them so that no degradation took place. A description of these techniques will be given.
Schumacher, R. J.↗
High-speed Digital Baseband Mixer
The feasibility of designing a digital, complex, baseband mixer with a 50 MHz sampling rate is explored. The baseband filter must provide passbands with linear phase response to minimize intersymbol interference. The effects of signal quantization, filter coefficient quantization, dynamic range, filter response characteristics, and the performance of the mixer when used for cross correlation and autocorrelation pulse detection techniques are discussed. This filter was designed for use in the high speed data acquisition system (HSDAS), an advanced experimental system in the Deep Space Network.
Chan, F. P.↗
A numerical comparison of discrete Kalman filtering algorithms - An orbit determination case study
An improved Kalman filter algorithm based on a modified Givens matrix triangularization technique is proposed for solving a nonstationary discrete-time linear filtering problem. The proposed U-D covariance factorization filter uses orthogonal transformation technique; measurement and time updating of the U-D factors involve separate application of Gentleman's fast square-root-free Givens rotations. Numerical stability and accuracy of the algorithm are compared with those of the conventional and stabilized Kalman filters and the Potter-Schmidt square-root filter, by applying these techniques to a realistic planetary navigation problem (orbit determination for the Saturn approach phase of the Mariner Jupiter-Saturn Mission, 1977). The new algorithm is shown to combine the numerical precision of square root filtering with the efficiency of the original Kalman algorithm.
Thornton, C. L.↗
Fast and Adaptive Lossless On-Board Hyperspectral Data Compression System for Space Applications
Efficient on-board lossless hyperspectral data compression reduces the data volume necessary to meet NASA and DoD limited downlink capabilities. The techniques also improves signature extraction, object recognition and feature classification capabilities by providing exact reconstructed data on constrained downlink resources. At JPL a novel, adaptive and predictive technique for lossless compression of hyperspectral data was recently developed. This technique uses an adaptive filtering method and achieves a combination of low complexity and compression effectiveness that far exceeds state-of-the-art techniques currently in use. The JPL-developed 'Fast Lossless' algorithm requires no training data or other specific information about the nature of the spectral bands for a fixed instrument dynamic range. It is of low computational complexity and thus well-suited for implementation in hardware, which makes it practical for flight implementations of pushbroom instruments. A prototype of the compressor (and decompressor) of the algorithm is available in software, but this implementation may not meet speed and real-time requirements of some space applications. Hardware acceleration provides performance improvements of 10x-100x vs. the software implementation (about 1M samples/sec on a Pentium IV machine). This paper describes a hardware implementation of the JPL-developed 'Fast Lossless' compression algorithm on a Field Programmable Gate Array (FPGA). The FPGA implementation targets the current state of the art FPGAs (Xilinx Virtex IV and V families) and compresses one sample every clock cycle to provide a fast and practical real-time solution for Space applications.
image compression↗
Hardware Implementation of Lossless Adaptive and Scalable Hyperspectral Data Compression for Space
On-board lossless hyperspectral data compression reduces data volume in order to meet NASA and DoD limited downlink capabilities. The technique also improves signature extraction, object recognition and feature classification capabilities by providing exact reconstructed data on constrained downlink resources. At JPL a novel, adaptive and predictive technique for lossless compression of hyperspectral data was recently developed. This technique uses an adaptive filtering method and achieves a combination of low complexity and compression effectiveness that far exceeds state-of-the-art techniques currently in use. The JPL-developed 'Fast Lossless' algorithm requires no training data or other specific information about the nature of the spectral bands for a fixed instrument dynamic range. It is of low computational complexity and thus well-suited for implementation in hardware. A modified form of the algorithm that is better suited for data from pushbroom instruments is generally appropriate for flight implementation. A scalable field programmable gate array (FPGA) hardware implementation was developed. The FPGA implementation achieves a throughput performance of 58 Msamples/sec, which can be increased to over 100 Msamples/sec in a parallel implementation that uses twice the hardware resources This paper describes the hardware implementation of the 'Modified Fast Lossless' compression algorithm on an FPGA. The FPGA implementation targets the current state-of-the-art FPGAs (Xilinx Virtex IV and V families) and compresses one sample every clock cycle to provide a fast and practical real-time solution for space applications.
FPGA implementation↗
Airborne Demonstration of FPGA Implementation of Fast Lossless Hyperspectral Data Compression System
Efficient on-board lossless hyperspectral data compression reduces data volume in order to meet NASA and DoD limited downlink capabilities. The technique also improves signature extraction, object recognition and feature classification capabilities by providing exact reconstructed data on constrained downlink resources. At JPL a novel, adaptive and predictive technique for lossless compression of hyperspectral data was recently developed. This technique uses an adaptive filtering method and achieves a combination of low complexity and compression effectiveness that far exceeds state-of-the-art techniques currently in use. The JPL-developed 'Fast Lossless' algorithm requires no training data or other specific information about the nature of the spectral bands for a fixed instrument dynamic range. It is of low computational complexity and thus well-suited for implementation in hardware.
data compression↗
Determination of plasma temperatures and luminosities using multiple extreme-ultraviolet and X-ray filters
We carefully examine the techniques used to infer temperatures of stellar coronal plasmas from the count rates of several broadband instruments in the X-ray and extreme-ultraviolet spectral ranges. In particular, we determine to what extent temperatures can be constrained and the corresponding uncertainties in the luminosities and emission measures lowered by fitting simultaneously count rates from the Einstein imaging proportional counter (IPC), the ROSAT Position Sensitive Proportional Counter (PSPC), the ROSAT Wide Field Camera (WFC) (both filters), and the EXOSAT Low Energy Telescope (LET) with the 3-Lex filter. We use published plasma emissivities with solar photospheric abundances. Since it has been found that single-temperature plasmas do not fit IPC data well, we assume a two-temperature plasma model. We find that, even with count rates from all of the above filters and overly optimistic error estimates, it is still not possible to determine a unique two-temperature solution. However, since the use of count rates from many filters can reduce substantially the number of possible solutions, temperature solutions determined by other means can be tested. We carry out such an analysis on a set of 18 nearby late-type stars to determine possible two-temperature solutions using multifilter photometry, and we compare these results with the temperature solutions derived by Schmitt et al. (1990) using IPC spectral data. In general, the two-temperature fits derived from the IPC spectral data are inconsistent with our results, with our data implying that, for many stars, the two temperatures derived by the IPC may be too low by about a factor of 2. The EXOSAT transmission grating Spectrometer (TGS) spectra of capella and sigma(exp 2) CrB support this conclusion. For Procyon and 70 Oph, though, the presence of a temperature component cooler than a million degress (not detected by the IPC) is deduced. While our analysis suggests the existence of more than one temperature in the coronae of late-type stars, in many instances our WFC data appear to be inconsistent with the presence of significant emission measure over a broad temperature distribution. This, together with the success of two-temperature plasmas in fitting IPC and TGS data, implies that for many stars, the coronal emission measure distribution may in fact be dominated by two distinct temperature regimes.
Wood, Brian E.↗
Wavelet Analyses of F/A-18 Aeroelastic and Aeroservoelastic Flight Test Data
Time-frequency signal representations combined with subspace identification methods were used to analyze aeroelastic flight data from the F/A-18 Systems Research Aircraft (SRA) and aeroservoelastic data from the F/A-18 High Alpha Research Vehicle (HARV). The F/A-18 SRA data were produced from a wingtip excitation system that generated linear frequency chirps and logarithmic sweeps. HARV data were acquired from digital Schroeder-phased and sinc pulse excitation signals to actuator commands. Nondilated continuous Morlet wavelets implemented as a filter bank were chosen for the time-frequency analysis to eliminate phase distortion as it occurs with sliding window discrete Fourier transform techniques. Wavelet coefficients were filtered to reduce effects of noise and nonlinear distortions identically in all inputs and outputs. Cleaned reconstructed time domain signals were used to compute improved transfer functions. Time and frequency domain subspace identification methods were applied to enhanced reconstructed time domain data and improved transfer functions, respectively. Time domain subspace performed poorly, even with the enhanced data, compared with frequency domain techniques. A frequency domain subspace method is shown to produce better results with the data processed using the Morlet time-frequency technique.
Martin J Brenner↗
Nonlinear Ensemble Filtering with Diffusion Models: Application to the Surface Quasigeostrophic Dynamics
The intersection between classical data assimilation methods and novel machine learning techniques has attracted significant interest in recent years. Here, we explore another promising solution in which diffusion models are used to formulate a robust nonlinear ensemble filter for sequential data assimilation. Unlike standard machine learning methods, the proposed ensemble score filter (EnSF) is completely training free and can efficiently generate a set of analysis ensemble members. Here, in this study, we apply the EnSF to a surface quasigeostrophic model and compare its performance against the popular local ensemble transform Kalman filter (LETKF), which makes Gaussian assumptions in the analysis step. Numerical tests demonstrate that EnSF maintains stable performance in the absence of localization and for a variety of experimental settings. We find that while LETKF maintains optimal performance in the case of linear observations of the entire state and a perfect model, EnSF shows improvements over LETKF when nonlinear observations are assimilated and the system is subject to unexpected model errors. A spectral decomposition of the analysis results in this nonlinear observation regime shows that the largest improvements over LETKF occur at large scales (small wavenumbers), where LETKF lacks sufficient ensemble spread. Overall, this initial application of EnSF to a geophysical model of intermediate complexity motivates further development of the algorithm for more realistic problems.
Artificial intelligence↗
The observed distribution of atmospheric ozone and its variations
It is pointed out that both the total amount and the vertical distribution of atmospheric ozone are presently measured routinely by various ground-based and satellite-borne instruments and by instruments mounted on different carrier platforms such as balloons, aircraft, and rockets. The techniques of observing atmospheric ozone are discussed, taking into account the determination of total ozone, the Dobson spectrophotometer, the Brewer spectrophotometer, the M-83 Filter Ozonometer, and satellite techniques. In a discussion of studies of vertical distribution, remote systems are considered along with in situ measurements. Attention is given to ground-based methods, satellite platforms, backscatter measurements, limb observations, electrochemical methods, chemiluminescent methods, optical methods, and rocket observations. A number of graphs showing the observed distribution of atmospheric ozone are also presented, and changes in this distribution are evaluated.
London, J.↗
Study of radar pulse compression for high resolution satellite altimetry
Pulse compression techniques are studied which are applicable to a satellite altimeter having a topographic resolution of + 10 cm. A systematic design procedure is used to determine the system parameters. The performance of an optimum, maximum likelihood processor is analysed, which provides the basis for modifying the standard split-gate tracker to achieve improved performance. Bandwidth considerations lead to the recommendation of a full deramp STRETCH pulse compression technique followed by an analog filter bank to separate range returns. The implementation of the recommended technique is examined.
Dooley, R. P.↗
Comparison and testing of extended Kalman filters for attitude estimation of the Earth Radiation Budget Satellite
This paper presents the testing and comparison of two extended Kalman filters (EKFs) developed for the Earth Radiation Budget Satellite (ERBS). One EKF updates the attitude quaternion using a four-component additive error quaternion. This technique is compared to that of a second EKF, which uses a multiplicative error quaternion. Brief developments of the algorithms are included. The convergence properties, singularity problems, and normalization techniques of the two filters are addressed. Both filters are tested with simulated ERBS sensor data in addition to real ERBS sensor data. The results of the two filters are also compared to those from the ERBS operational ground support software, which uses a batch differential correction algorithm to estimate attitude and gyro biases.
Bar-Itzhack, Itzhack Y.↗
Comparison and testing of extended Kalman filters for attitude estimation of the Earth radiation budget satellite
The testing and comparison of two Extended Kalman Filters (EKFs) developed for the Earth Radiation Budget Satellite (ERBS) is described. One EKF updates the attitude quaternion using a four component additive error quaternion. This technique is compared to that of a second EKF, which uses a multiplicative error quaternion. A brief development of the multiplicative algorithm is included. The mathematical development of the additive EKF was presented in the 1989 Flight Mechanics/Estimation Theory Symposium along with some preliminary testing results using real spacecraft data. A summary of the additive EKF algorithm is included. The convergence properties, singularity problems, and normalization techniques of the two filters are addressed. Both filters are also compared to those from the ERBS operational ground support software, which uses a batch differential correction algorithm to estimate attitude and gyro biases. Sensitivity studies are performed on the estimation of sensor calibration states. The potential application of the EKF for real time and non-real time ground attitude determination and sensor calibration for future missions such as the Gamma Ray Observatory (GRO) and the Small Explorer Mission (SMEX) is also presented.
Deutschmann, Julie↗
Temperature profile retrievals with extended Kalman-Bucy filters
The Extended Kalman-Bucy Filter is a powerful technique for estimating non-stationary random parameters in situations where the received signal is a noisy non-linear function of those parameters. A practical causal filter for retrieving atmospheric temperature profiles from radiances observed at a single scan angle by the Scanning Microwave Spectrometer (SCAMS) carried on the Nimbus 6 satellite typically shows approximately a 10-30% reduction in rms error about the mean at almost all levels below 70 mb when compared with a regression inversion.
Ledsham, W. H.↗
Variable threshold zonal filtering
Variable threshold zonal filtering is an active nonlinear image enhancement technique designed to avoid ringing artifacts which filtering can introduce near sharp brightness transitions in the original scene. The filtering procedure can be implemented in the Fourier domain or by subtractive box filtering. It is shown, in reference to a Landsat scene of Iceland, that while conventional box filtering produces severe ringing, zonal filtering results in a more uniform display of local detail.
Schwartz, A. A.↗
Applications of modern estimation techniques to aircraft navigation
Kalman filter design and analysis are discussed, and application of the analysis to multidimensional aircraft navigation problems is considered. The application of perturbation matrices, U-D factors, and filter variance component error source percentages to avionics covariance analysis is suggested. Filter design is divided into four phases, and the procedures applied in each phase are examined.
Bierman, G. J.↗