Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fluxes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

CERES Single Satellite Footprint, TOA and Surface Fluxes, Clouds (SSF) data in HDF (CER_SSF_Aqua-FM4-MODIS_Ed2A-NoSW)

The Single Scanner Footprint TOA/Surface Fluxes and Clouds (SSF) product contains one hour of instantaneous Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SSF combines instantaneous CERES data with scene information from a higher-resolution imager such as Visible/Infrared Scanner (VIRS) on TRMM or Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua. Scene identification and cloud properties are defined at the higher imager resolution and these data are averaged over the larger CERES footprint. For each CERES footprint, the SSF contains the number of cloud layers and for each layer the cloud amount, height, temperature, pressure, optical depth, emissivity, ice and liquid water path, and water particle size. The SSF also contains the CERES filtered radiances for the total, shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW, LW, and WN radiances at spacecraft altitude are converted to Top-of-the-Atmosphere (TOA) fluxes based on the imager defined scene. These TOA fluxes are used to estimate surface fluxes. Only footprints with adequate imager coverage are included on CER_SSF_TRMM-PFM-VIRS_Subset_Edition1the SSF which is much less than the full set of footprints on the CERES ES-8 product. The following CERES SSF data sets are currently available: CER_SSF_TRMM-PFM-VIRS_Edition1 CER_SSF_TRMM-PFM-VIRS_Subset_Edition1 CER_SSF_TRMM-PFM-VIRS_Edition2A CER_SSF_TRMM-SIM-VIRS_Edition2_VIRSonly CER_SSF_TRMM-PFM-VIRS_Edition2A-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition2A CER_SSF_Terra-FM2-MODIS_Edition2A CER_SSF_Terra-FM1-MODIS_Edition2B CER_SSF_Terra-FM2-MODIS_Edition2B CER_SSF_Aqua-FM4-MODIS_Beta1 CER_SSF_Aqua-FM3-MODIS_Beta2 CER_SSF_Aqua-FM4-MODIS_Beta2. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2006-01-01] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 hour; Temporal_Resolution_Range=Hourly - < Daily].

LIQUID WATER PATH↗

Interplanetary cosmic dust flux

Pioneer 8 and 9 measured cosmic dust flux rate data are in agreement with astronomy theory, zodiacal light measurements, and ground-based observations, but differ markedly from the high flux rates deduced from earlier in situ measurements. As many as seven orders-of-magnitude separate the small particle end of the high and low flux curves. It was concluded that the data from the multicoincidence cosmic dust sensors have not only measured very low flux for micrometeorites, which is in keeping with astronomy theory, but have also shown how a high flux theory may be based on faulty data.

Berg, O. E.↗

Combined buoyancy and flow direction effects on saturated boiling critical heat flux in liquid nitrogen

Buoyancy effects on the critical heat flux and general data trends for a liquid nitrogen internal flow system were determined by comparison of upflow and downflow data under identical test conditions. The test section had a 1.28 cm diameter flow passage and a 30.5 cm heated length which was subjected to uniform heat fluxes through resistance heating. Test conditions covered a range of pressures from 3.4 to 10.2 atm, inlet velocities from 0.23 to 3.51 m/sec, with the liquid nitrogen temperature at saturated inlet conditions. Data comparisons showed that the critical heat flux for downflow could be up to 36 percent lower than for upflow. A nonmonotonic relationship between the critical heat flux and velocity was determined for upflow but not for downflow. A limiting inlet velocity of 4.12 m/sec was determined to be the minimum velocity required to completely suppress the influence of buoyancy on the critical heat flux for this saturated inlet flow system. A correlation of this limiting fluid velocity is presented that was developed from previously published subcooled liquid nitrogen data and the saturated data of this investigation.

Papell, S. S.↗

Geometrical correction factors for heat flux meters

General formulas are derived for determining gage averaging errors of strip-type heat flux meters used in the measurement of one-dimensional heat flux distributions. The local averaging error e(x) is defined as the difference between the measured value of the heat flux and the local value which occurs at the center of the gage. In terms of e(x), a correction procedure is presented which allows a better estimate for the true value of the local heat flux. For many practical problems, it is possible to use relatively large gages to obtain acceptable heat flux measurements.

Baumeister, K. J.↗

The meridional variation of the eddy heat fluxes by baroclinic waves and their parameterization

The meridional and vertical eddy fluxes of sensible heat produced by small-amplitude growing baroclinic waves are calculated using solutions to the two-level model with horizontal shear in the mean flow. The results show that the fluxes are primarily dependent on the local baroclinicity, i.e., the local value of the isentropic slopes in the mean state. Where the slope exceeds the critical value, the transports are poleward and upward; where the slope is less than the critical value, the transports are equatorward and downward. These results are used to improve an earlier parameterization of the tropospheric eddy fluxes of sensible heat based on Eady's model. Comparisons with observations show that the improved parameterization reproduces the observed magnitude and sign of the eddy fluxes and their vertical variations and seasonal changes, but the maximum in the poleward flux is too near the equator.

Stone, P. H.↗

Geometrical correction factors for heat flux meters

General formulas are derived for determining gage averaging errors of strip-type heat flux meters used in the measurement of one-dimensional heat flux distributions. The local averaging error e(x) is defined as the difference between the measured value of the heat flux and the local value which occurs at the center of the gage. In terms of e(x), a correction procedure is presented which allows a better estimate for the true value of the local heat flux. For many practical problems, it is possible to use relatively large gages to obtain acceptable heat flux measurements.

Baumeister, K. J.↗

Neutral hydrogen flux measured at 100- to 200-km altitude in an electron aurora

Neutral hydrogen fluxes were measured at altitudes of 120-200 km by a rocket payload that also measured electron and proton fluxes and vector magnetic fields. An intense electron arc was crossed, while an upper limit to the flux of 0.5- to 20-keV protons was 1,000,000 per sq cm s sr keV. A neutral flux of 50,000,000 per sq cm s sr was observed, assuming hydrogen with greater than 1-keV energy, with greater north-south extent than the electron flux. Its pitch angle distribution was peaked toward 90 deg, tending toward isotropy in the center. This is fitted to a model describing spreading of an initial proton arc above 500 km.

Iglesias, G. E.↗

Intercomparison of ground-based and space solar flux measurements

Detailed temporal measurements of the solar flux at one location are performed. These data are then analyzed and compared to the potential of space measurements which allow one to consider the flux falling on areas of the earth. An important result of the research is that the temporal characteristics of the flux in the presence of a real atmosphere would be difficult to obtain from space and that the variations in the flux can be highly significant in regard to most solar conversion schemes. The detailed results of the research are presented. The instruments developed to separate the direct and scattered solar flux, the computer analysis methods developed, and the results of the research, presented as both graphical and tabular data, are discussed.

Meinel, A. B.↗

26.3-MHz radio source survey. II - Radio source positions and fluxes

The results of the Clark Lake 26.3-MHz Sky Survey are presented. Data concerning the apparent fluxes and positions of 471 radio sources in the declination range 3-63 deg are given. Almost all of these sources are identified with 3CR or 4C sources, and upper limits are placed on the fluxes of all 3CR sources which could not be found. The flux scale for this survey is based upon the absolute flux determinations of Viner (1975, Paper I of this series). The procedures employed and the errors are discussed. Low-frequency flux scales are discussed and comparisons are made with other workers. The Kellermann, Pauliny-Toth, and Williams (1969) scale should be raised by 11% to agree with the Clark Lake scale. The Penticton scale (Roger, Bridle, and Costain 1973) and the Clark Lake scale agree very well. The Grakovo scale (Bruk et al. 1968; Braude et al. 1969a) appears to be highly nonlinear and about 30% above the Clark Lake scale.

Viner, M. R.↗

90-GHz flux-density measurements of variable radio sources

Results are presented for measurements of the flux densities of 10 variable extragalactic sources at 85.2 or 90 GHz, which were made over a period of almost seven years with the NRAO 36-ft millimeter-wave antenna. The primary flux-density calibration standards used include Jupiter, Saturn, Mars, and the small-diameter Galactic source DR 21. Measured flux densities are given as a function of time (in years) for the sources 3C 84, NRAO 150, 3C 120, OJ 287, 4C 39.25, 3C 273, 3C 279, 3C 345, BL Lac, and 3C 454.3. No statistically meaningful flux-density changes during an observing interval (1 to 3 days) are detected for any source, and a high degree of correlation between flux-density variations at 85.2 or 90 GHz and those observed at lower frequencies is found in all 10 sources. Some variations observed at different frequencies in several individual sources are briefly discussed.

Hobbs, R. W.↗

An emerging flux model for the solar flare phenomenon

An outline is presented of the physical processes involved in the emerging flux model, which appears to explain naturally many solar flare observations. The separate physical phases of the basic model include a preflare heating phase as the new flux emerges, an impulsive phase as high-energy particles are accelerated, a flash (or explosive) phase when the H-alpha intensity increases, and a main phase while it decreases. The extent and morphology of the main phase emission depend on the structure of the magnetic field region in which the new flux finds itself imbedded. It is suggested that a (small) simple loop flare occurs if the new flux appears in a region where no great amount of magnetic energy in excess of potential is stored. A two-ribbon flare occurs if the flux emerges near the polarity inversion line of an active region that has begun to develop filaments.

Heyvaerts, J.↗

The use of the high flux heater in the smoke chamber to measure ignitability and smoke evolution of composite panels

Ten samples of composite panels were evaluated in the smoke chamber using a high flux heater to produce heat flux levels up to 9.5 watts per square cm. This study demonstrated the potential of the apparatus as a means of evaluating ignitability as well as smoke evolution. Depending on the material and the heat flux level, ignitability results ranged from ignition within 2 seconds to no ignition during the test period. Smoke density generally increased with increasing heat flux. A composite panel consisting of bismaleimide-fiberglass/bismaleimide honeycomb with carbon microballoons exhibited the lowest smoke density at high heat flux levels and the greatest resistance to autoignition.

Hilado, C. J.↗

Energy spectrum and flux of fast neutrons in the atmosphere

The neutron energy spectrum and flux in the atmosphere at the Pfotzer maximum (about 100 g per cm squared) were measured at geomagnetic latitude 42 deg N, using a system capable of detecting a small flux of fast (5 to 20 MeV) neutrons in a much larger background flux of gamma rays and charged particles. The detector consisted of a cylindrical cell of organic liquid scintillator coupled to a high-resolution two-parameter multiparticle pulse shape discriminator with a two-parameter logarithmic pulse-height analyzer. The spectral parameter for the differential neutron energy spectrum was found to decrease from 4.4 plus or minus 0.8 between 3.5 and 6.0 MeV to 1.5 plus or minus 1.0 in the interval 11 to 20 MeV; a value of 0.36 plus or minus 0.10 neutrons per cm squared was calculated for neutron flux between 3.5 and 10 MeV. The importance of these results for evaluating the role of albedo neutron leakage as a source of the energetic proton flux in the radiation belts is also considered.

Saint Onge, R. N.↗

Discrepancy in proton flux extrapolation along field lines in the middle Jovian magnetosphere

Fluxes of energetic electrons and protons in Jupiter's outer magnetosphere were observed to be modulated with the 10 hour rotation period of the planet. This modulation was due to the concentration of particles at the magnetic equator: the non-alignment of Jupiter's spin and rotation axes caused Pioneer-10 to oscillate between +20 deg and -19 deg magnetic latitude and hence, between regions of stronger and weaker fluxes. The relationship between electron and proton fluxes observed off the magnetic equator was countered with measurements at the equatorial crossing radii of the same flux tubes by applying Liouville's theorem with the assumption that particles move conserving their magnetic moments. A magnetic model which matches the intensity and direction of the magnetic field along the Pioneer 10 trajectory was used for determining the positions of the equatorial crossings. Energetic electrons compared in this way appear to be consistently described. Protons, on the other hand, show much weaker fluxes at the off-equatorial points than would be predicted by this simple application of Liouville's theorem.

Schardt, A. W.↗

Spacecraft-produced neutron fluxes on Skylab

Estimates of neutron fluxes in different energy ranges are reported for the Skylab spacecraft. Detectors composed of uranium, thorium, and bismuth foils with mica as a fission track recorder, as well as boron foils with cellulose acetate as an alpha-particle recorder, were deployed at different positions in the Orbital Workshop. It was found that the Skylab neutron flux was dominated by high energy (greater than 1 MeV) contributions and that there was no significant time variation in the fluxes. Firm upper limits of 7-15 neutrons/sq cm-sec, depending on the detector location in the spacecraft, were established for fluxes above 1 MeV. Below 1 MeV, the neutron fluxes were about an order of magnitude lower. The neutrons are interpreted as originating from the interactions of leakage protons from the radiation belt with the spacecraft.

Quist, T. C.↗

Solar proton fluxes since 1956

The fluxes of protons emitted during solar flares since 1956 were evaluated. The depth-versus-activity profiles of Co-56 in several lunar rocks are consistent with the solar proton fluxes detected by experiments on several satellites. Only about 20% of the solar-proton-induced activities of Na-22 and Fe-55 in lunar rocks from early Apollo missions were produced by protons emitted from the sun during solar cycle 20 (1965-1975). The depth-versus-activity data for these radionuclides in several lunar rocks were used to determine the fluxes of protons during solar cycle 19 (1954-1964). The average proton fluxes for cycle 19 are about five times those for both the last million years and for cycle 20 and are about five times the previous estimate for cycle 19 based on neutron-monitor and radio ionospheric measurements. These solar-proton flux variations correlate with changes in sunspot activity.

Reedy, R. C.↗

Lunar nightside electron fluxes

Studies of particle fluxes at the lunar surface with the Apollo 14 ALSEP/CPLEE particle spectrometer during lunar night periods have shown three distinct types of electron flux events. One of these is shown to originate at the earth's bow shock, but the remaining two are shown to arise most likely as a result of local solar wind-lunar interactions. The flux events had mean electron energies of a few hundred electron volts and total fluxes of 10 to the 5th to 10 to the 7th electrons/sq cm-sec. These fluxes are a possible source of the large negative lunar surface potentials observed by other ALSEP instruments

Reasoner, D. L.↗

Quantitative calculations of helium ion escape fluxes from the polar ionospheres

An attempt is made to reduce the discrepancy between the earlier theoretical model and the recent experimental observations of H(+) outward fluxes for winter and summer hemispheres by improving the theoretical model. The helium photoionization cross sections used are accurate to 10%, the latest solar EUV fluxes measured by the Atmosphere Explorer satellites are incorporated, and the most recent MSIS model of the neutral atmosphere is contained in the model. A range of conditions covering solar cycle, seasonal, and geomagnetic conditions are studied. The results show a maximum H(+) escape flux of 1.4 times 10 to the 7th per sq cm per sec for solar maximum, winter, low magnetic activity conditions, which is within the scatter of the measured fluxes. The computed summer H(+) escape flux is a factor of 20 lower than the winter value. Possible reasons for the slight discrepancy between theory and experiment in summer are discussed.

Raitt, W. J.↗