Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fractional derivative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Assessing the Consistency of Estimated Ground Cover Fractions between the BLM AIM Method and Optical Remote Sensing Method

Since 2012, Argonne National Laboratory (Argonne) has supported the Bureau of Land Management (BLM) in developing remote sensing methodologies for long-term environmental monitoring of Palo Verde Mesa in eastern Riverside County, California, including methods for: detailed mapping of ephemeral streams, estimating fractional cover of desert-land surface components (e.g., trees, shrubs, litters, and bare ground), evaluating erosion risk or land stability, and characterizing vegetation alliances using spatial structure and geostatistical approaches. These studies showed the promise of remote sensing for monitoring changes in desert landscapes by providing information that would be difficult to obtain through field surveys. During this time the BLM has also worked to establish long-term monitoring protocols and compiled field-observation data collected using standardized protocols from the Assessment, Inventory, and Monitoring (AIM) strategy. The AIM data can be compared to data derived from remote sensing methods to evaluate their relative operational utility in monitoring landscape change. If ground cover estimated using remotely sensed imagery is comparable to AIM ground cover estimates, then remote sensing can be used to monitor whether any land cover change in desert landscapes may be related to solar energy development. Therefore, the goal of this study was to determine the consistency in ground cover estimates between AIM data and those derived from publicly- available remotely sensed imagery, such as that available through the U.S. Department of Agriculture, National Agricultural Imagery Program (NAIP), to examine feasibility of a remote sensing method for complementing AIM monitoring. Based on the image analysis in this study, we also provide recommendations for how small unmanned aerial system (sUAS) data may be used to complement BLM’s AIM data and NAIP imagery for future vegetation monitoring. The ground cover types we originally planned to investigate were trees, shrubs, and bare ground. However, the small sample size and a limited range of cover fraction of trees and shrubs in the AIM dataset (e.g., 33 samples with a maximum shrub cover of 18%, 14 samples with a maximum tree cover of 17%) did not allow for performing a meaningful evaluation for the remote sensing approach. Therefore, we conducted the study focusing on bare ground, foliar, and rock cover, all of which are indicators reported in the AIM remote sensing dataset.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

VFA Biorefinery Design for Informed Production of Ground and Aviation Fuels

The rising demand for low-carbon intensity fuel options requires evaluation of a system which can support their production economically and sustainably. Volatile fatty acids (VFAs) ranging from C2 to C8 can be derived in high yield from arrested anaerobic digestion of biomass. This talk provides an overview of our work in which we upgrade wet waste-derived VFAs using ketonization to elongate their carbon backbone to reach a range relevant to jet or diesel fuels. Kinetic models were used to predict ketone profiles from varying VFA profiles, thereby informing potential carbon flow to either (a) mixed paraffins for use in diesel or aviation fuel, or (b) ethers for use in diesel fuel. To do this, the anticipated products were screened for critical fuel characteristics using predictive tools. The criteria for neat and blended bioblendstocks were chosen based on conventional petrofuel requirements, and they were applied to inform fuel targets, identify limiting characteristics, and guide conversion development. While paraffins can serve as either diesel or aviation fuels, the latter has stringent criteria which include a precise distillation curve range tied to carbon distribution. Fuels which fall outside this range typically fail to meet other property metrics, and as such flashpoint and viscosity were identified as potentially limiting properties of this VFA aviation fuel. However, paraffin fractions which fall outside aviation criteria may meet diesel fuel requirements, which are looser except for the flashpoint minimum. Flashpoint was also a concern for smaller VFA diesel ethers, which posed an additional oxygenate risk of high water solubility. This fuel-informed conversion design process was demonstrated through production of paraffins with reduced sooting as compared to petrodiesel (~34%), and increased renewable aviation fuel blend levels (>70%). VFA-derived ethers improved petrodiesel by increasing fuel autoignition quality by 56% and reducing sooting by 86%. These VFA aviation and diesel fuels could enable greenhouse gas (GHG) reductions of over 165% and 50%, respectively, relative to their purely fossil-derived counterparts. Collectively, this work provides (i) an overview of how we leveraged the flexibility of VFAs for fuel production; and (ii) insight into the potential of a VFA biorefinery to accommodate varied feed and fuel applications, while also considering the merit of tailored fuel production pathways and GHG reduction potential.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Structure-performance relationships in lignin-based transesterification vitrimers: The role of lignin structural features

Lignin has been hailed as an ideal renewable alternative for petrochemical-based prepolymers in material synthesis for a sustainable and circular economy, due to its abundant aromatic network and high carbon content. However, the properties and performance of lignin-derived macromolecules are strongly influenced by the lignin itself. While numerous studies have explored the impact of lignin content on the thermomechanical performance of lignin-based vitrimers, literature on how the inherent structural features of lignin affect these properties is scanty. In this study, hardwood organosolv lignin was fractionated in ethyl acetate, ethanol, and acetone to obtain lignin fractions with varying structural characteristics. These fractions were then modified through carboxylation and crosslinked with epoxidized soybean oil (ESO) at a hydroxyl to epoxy group ratio of 1:1 to produce lignin-based transesterification vitrimers (LVs). The thermal properties (i.e. glass transition temperature and thermal stability), tensile strength, storage modulus, and stress relaxation behavior of the LVs were studied and carefully related to the structural features of lignin. The results revealed a positive relationship between strong hydroxyl content in modified lignin and the tensile strength (5.10–9.71 MPa), storage modulus (1099.4 – 1372.8 MPa), crosslinking density, and stress relaxation of the LVs. Additionally, both the storage modulus and tensile strength exhibited a positive relationship with the ratio of rigid linkages in modified lignin, while lignin molecular weight was found to significantly impact the thermal properties of LVs (i.e Tg and thermal stability). This study not only highlights the valorization of lignin in vitrimer synthesis but also provide insights for designing lignin-based materials with tailored properties for specific applications.

Bio-based polymer↗
DOE OSTI2024

Detachment scalings derived from 1D scrape-off-layer simulations

Fusion power plants will require detachment to mitigate sputtering and keep divertor heat fluxes at tolerable levels. Controlling detachment on these devices may require the use of real-time scrape-off-layer modeling to complement the limited set of available diagnostics. In this work, we use the configurable Hermes-3 edge modeling framework to perform time-dependent, fixed-fraction-impurity 1D detachment simulations. Although currently far from real-time, these simulations are used to investigate time-dependent effects and the minimum physics set required for control-relevant modeling. We show that these simulations reproduce the expected rollover of the target ion flux — a typical characteristic of detachment onset. We also perform scans of the input heat flux and impurity concentration and show that the steady-state results closely match the scalings predicted by the 0D time-independent Lengyel–Goedheer model. This allows us to indirectly compare to SOLPS simulations, which find a similar scaling but a lower value for the impurity concentration required for detachment for given upstream conditions. We use this result to suggest a series of improvements for the Hermes simulations, and finally show simulations demonstrating the impact of time-dependence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Temperature separation under compression of moderately coupled plasma

In moderately coupled plasmas, a significant fraction of the internal energy resides in electric fields. As these plasmas are heated or compressed, the shifting partition of energy between particles and fields leads to surprising effects, particularly when ions and electrons have different temperatures. In this work, quasi-equations of state (quasi-EOS) are derived for two-temperature moderately coupled plasma in a thermodynamic framework and expressed in a simple form. These quasi-EOS readily yield expressions for correlation heating, in which heating of the electrons causes a rapid increase in ion temperature even in the absence of collisional energy exchange between species. It is also shown that, remarkably, compression of moderately coupled plasma drives a temperature difference between electrons and ions, even when the species start at equal temperatures. These additional channels for ion heating may be relevant in designing ignition schemes for inertial confinement fusion.

Fetsch, H. (ORCID:0000000256133975)↗
DOE OSTI2020

Quantifying uncertainties and correlations in the nuclear-matter equation of state

We perform statistically rigorous uncertainty quantification (UQ) for chiral effective field theory (χ EFT) applied to infinite nuclear matter up to twice nuclear saturation density. The equation of state (EOS) is based on high-order many-body perturbation theory calculations with nucleon-nucleon and three-nucleon interactions up to fourth order in the χ EFT expansion. From these calculations our newly developed Bayesian machine-learning approach extracts the size and smoothness properties of the correlated EFT truncation error. Furthermore, we then propose a novel extension that uses multitask machine learning to reveal correlations between the EOS at different proton fractions. The inferred in-medium χ EFT breakdown scale in pure neutron matter and symmetric nuclear matter is consistent with that from free-space nucleon-nucleon scattering. These significant advances allow us to provide posterior distributions for the nuclear saturation point and propagate theoretical uncertainties to derived quantities: the pressure and incompressibility of symmetric nuclear matter, the nuclear symmetry energy, and its derivative. Our results, which are validated by statistical diagnostics, demonstrate that an understanding of truncation-error correlations between different densities and different observables is crucial for reliable UQ. The methods developed here are publicly available as annotated Jupyter notebooks.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

A novel formulation of the unintegrated gluon distribution for DIS

In this talk, we revisit inclusive DIS in the small x limit and derive a new factorization formula that accounts for leading powers in both Bjorken and Regge limits. In this semi-classical description, we obtain a new unintegrated gluon distribution which encompasses both the dipole operator and the gluon Parton Distribution Function with an explicit dependence on the longitudinal momentum fraction x.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Measurement of the double-differential cross section of muon-neutrino charged-current interactions with low hadronic energy in the NOvA Near Detector

The NOvA collaboration reports cross-section measurements for $\nu_{\mu}$ charged-current interactions with low hadronic energy (maximum kinetic energy of 250 MeV for protons and 175 MeV for pions) in the NOvA Near Detector. The results are presented as a double-differential cross section as a function of the direct observables of the final-state muon kinematics. Results are also presented as a single-differential cross section as a function of the derived square of the four-momentum transfer, $Q^{2}$, and as a function of the derived neutrino energy. The data correspond to an accumulated 8.09$\times10^{20}$ protons-on-target (POT) in the neutrino mode of the NuMI beam, with a narrow band of neutrino energies peaked at 1.8 GeV. The analysis provides a sample of neutrino-nucleus interactions with an enhanced fraction of quasi-elastic and two-particle-two-hole (2p2h) interactions. This enhancement allows quantitative comparisons with various nuclear models. We find strong disagreement between data and theory-based models in various regions of the muon kinematic phase space, especially in the forward muon direction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Characterization of lift force and torque in prolate ellipsoid suspensions

The paper derives correlations for lift force and fluid torques acting on stationary prolate ellipsoid suspensions of aspect ratio (AR) 2.5, 5, and 10 subjected to uniform flow. Here, Particle Resolved Simulations (PRS) are conducted on a suspension of infinite extent in two directions for Reynolds number 10≤Re≤200 and solid fractions (φ) between 0.1≤φ≤0.3.The suspension-mean lift-to-drag ratio varies between 7% to 14% at Re=10 which increases to 14%~22% at Re=200. The torque-induced tip rotational acceleration can reach 38%~85% of drag-induced translational acceleration at Re=200. Single particle lift force and torque correlations of (Fröhlich et al., 2020) are modified and adapted to predict current angular-mean lift and torque data. The resulting lift correlation captures the PRS data within an average deviation below 7%. Torque exhibits a somewhat more complex dependency at AR=10 than the assumed sinθ ∙ cosθ variation but nevertheless the correlations predict angular-mean values with mean relative deviations of 16.6% at AR=10.

42 ENGINEERING↗
DOE OSTI2024

Impacts of Hydrogen Bond Donor Structures in Phenolic Aldehyde Deep Eutectic Solvents on Pretreatment Efficiency

As a green solvent for biomass processing, deep eutectic solvents (DESs) have shown effectiveness in biomass processing. Here, in this study, phenolic aldehydes with different numbers of methoxy groups, including 4-hydroxybenzaldehyde (HBA, no methoxy), vanillin (VA, monomethoxy), and syringaldehyde (SA, dimethoxy) were employed to synthesize DESs with choline chloride (ChCl). The presence of methoxy groups in the hydrogen bond donor structure affected DES properties, as well as biomass pretreatment performance. The high thermal stability of phenolic aldehyde DESs was shown with over 225 °C onset temperature. The hydrogen bond donor with one aldehyde and one hydroxyl group at the para position without a methoxy group (ChCl-HBA) showed the highest xylan removal and delignification, reaching 59.3 and 88.0%, respectively, leading to the highest enzymatic hydrolysis yield. Sonication after pretreatment further enhanced the hydrolysis yields, achieving 83.3% glucan conversion and 50.1% xylan conversion. In the lignin-rich fraction, the recovered lignin showed a low weight–average molecular weight under 2100 g/mol with a relatively uniform molecular weight dispersity below 1.5. This study provides insights into how the chemical structure of hydrogen bond donors in DESs affects biomass processing and paves the way for designing effective lignin-derived DES in future biorefinery processes.

09 BIOMASS FUELS↗
DOE OSTI2022

Cranberry Arabino-Xyloglucan and Pectic Oligosaccharides Induce Lactobacillus Growth and Short-Chain Fatty Acid Production

Numerous health benefits have been reported from the consumption of cranberry-derived products, and recent studies have identified bioactive polysaccharides and oligosaccharides from cranberry pomace. This study aimed to further characterize xyloglucan and pectic oligosaccharide structures from pectinase-treated cranberry pomace and measure the growth and short-chain fatty acid production of 86 Lactobacillus strains using a cranberry oligosaccharide fraction as the carbon source. In addition to arabino-xyloglucan structures, cranberry oligosaccharides included pectic rhamnogalacturonan I which was methyl-esterified, acetylated and contained arabino-galacto-oligosaccharide side chains and a 4,5-unsaturated function at the non-reducing end. When grown on cranberry oligosaccharides, ten Lactobacillus strains reached a final culture density (ΔOD) ≥ 0.50 after 24 h incubation at 32 °C, which was comparable to L. plantarum ATCC BAA 793. All strains produced lactic, acetic, and propionic acids, and all but three strains produced butyric acid. This study demonstrated that the ability to metabolize cranberry oligosaccharides is Lactobacillus strain specific, with some strains having the potential to be probiotics, and for the first time showed these ten strains were capable of growth on this carbon source. The novel cranberry pectic and arabino-xyloglucan oligosaccharide structures reported here combined with the Lactobacillus strains that can metabolize cranberry oligosaccharides and produce short-chain fatty acids, have excellent potential as health-promoting synbiotics.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Automatically generated model for light alkene combustion

Light alkenes are common combustion intermediates for a variety of fuels. Therefore, understanding their oxidation and pyrolysis chemistry is key to building detailed mechanisms for heavier fuels. This work was focused on the development and evaluation of a detailed kinetic mechanism suitable for the combustion of light alkenes up to C 4 without the use of tuned parameters, instead, the parameter values come from first principles or direct measurements. The generated mechanism accurately estimates the laminar burning velocity (S u ) and ignition delay time (IDT) of light alkenes available in the literature, which represent fundamental combustion properties at a wide range of conditions. Because each parameter is thought to have a physically realistic value, not tuned to these measurements, the new model could be used as a sub-mechanism in models for other applications. The reaction network was generated with the open-source Reaction Mechanism Generator (RMG) software. Sensitivity analyses were performed under wide ranges of temperatures and pressures, allowing for the identification of the most impactful species and reactions. Based on these, a comprehensive thermochemistry database, including calculations on 550 molecules performed in this work at the CBS-QB3 level of theory, and a kinetic library, including theoretically-derived reaction rates retrieved from the literature, were built and used in the mechanism generation. The developed mechanism was compared against several existing detailed kinetic mechanisms for ethene, propene, 1-butene, 2-butene, and isobutene. Here, the newly generated model is the most accurate among the ones analyzed, in terms of fractional bias and normalized mean square error. Hence, this new model was used to analyze the chemistry of alkene combustion. Key rate coefficients were compared, to identify the cause of deviations between the models and possible areas for further improvements.

09 BIOMASS FUELS↗
DOE OSTI2026

Dynamic permeability in metastable droplet interfacial bilayers

Membrane pores are implicated in several critical functions, including cell fusion and the transport of signaling molecules for intercellular communication. However, these structural features are often difficult to probe directly. Droplet interfacial bilayers offer a synthetic platform to study such membrane properties. We develop a theory that links size-selective transport across a metastable membrane with its transient structural properties. The central quantity of our theory is a dynamic permeability that depends on the mechanism of pore growth, which controls the transient distribution of pore sizes in the membrane. We present a mechanical perspective to derive pore growth dynamics and the resulting size distribution for growth via Ostwald ripening and discuss how these dynamics compare to other growth mechanisms such as coalescence and growth through surfactant desorption. We find scaling relations between the transported particle size, the pore growth rate, and the time for a given fraction of particles to cross the membrane, from which one may deduce the dominant mechanism of pore growth, as well as material properties and structural features of the membrane. Finally, we suggest experiments using droplet interfacial bilayers to validate our theoretical predictions.

Sarma, Nivedina A↗
DOE OSTI2023

Equilibrated Gas and Carbonate Standard‐Derived Dual (Δ 47 and Δ 48 ) Clumped Isotope Values

Abstract Carbonate clumped isotope geochemistry has primarily focused on mass spectrometric determination of m/z 47 CO 2 for geothermometry, but theoretical calculations and recent experiments indicate paired analysis of the m/z 47 ( 13 C 18 O 16 O) and m/z 48 ( 12 C 18 O 18 O) isotopologues (referred to as Δ 47 and Δ 48 ) can be used to study non‐equilibrium isotope fractionations and refine temperature estimates. We utilize 5,448 Δ 47 and 3,400 Δ 48 replicate measurements of carbonate samples and standards, and 183 Δ 47 and 195 Δ 48 replicate measurements of gas standards from 2015 to 2021 from a multi‐year and multi‐instrument data set to constrain Δ 47 and Δ 48 values for 27 samples and standards, including Devils Hole cave calcite, and study equilibrium Δ 47 ‐Δ 48 , Δ 47 ‐temperature, and Δ 48 ‐temperature relationships. We compare results to previously published findings and calculate equilibrium regressions based on data from multiple laboratories. We report acid digestion fractionation factors, Δ* 63‐47 and Δ* 64‐48 , and account for their dependence on the initial clumped isotope values of the mineral.

58 GEOSCIENCES↗
DOE OSTI2023

Composition and Flux of Dissolved and Particulate Carbon and Nitrogen in the Lower Tocantins River

The Tocantins River contributes ~5 % of the total flux of water to the Amazon River plume in the Atlantic Ocean. Here, we evaluate monthly variability in the composition and abundance of carbon, nitrogen, and suspended sediment in the lower reaches of the Tocantins River from 2014-2016. Dissolved organic carbon (DOC) concentrations generally increased during periods of high discharge and are ~1.5 times lower than average concentrations at the mouth of the Amazon River. Dissolved inorganic carbon (DIC) similarly increased during periods of high discharge. Total dissolved nitrogen (TDN) and individual nitrogen species followed a similar temporal pattern, increasing during high water. $\text{NO}^-_3$ predominated the dissolved inorganic nitrogen (DIN) pool, followed by $\text{NH}_4^+$, and $\text{NO}_2^-$ , characteristic of environments with a relatively low anthropogenic impact. Dissolved fractions represented 92 % of the total carbon exported and 78 % of the total nitrogen exported. The suspended particulate sediment flux was 2.72 x 10 6 t yr -1 , with fine suspended sediment (FSS) dominating (71.3 %). Concentrations of carbon relative to nitrogen indicate a primarily terrigenous source of organic matter and CO 2 derived from in situ respiration of this material during the rainy season and a primarily algal/bacterial source of organic matter during the dry season. Considering past estimates of dissolved carbon and nitrogen fluxes from the Amazon River to the Atlantic Ocean, the Tocantins River contributes 3 and 3.7 % to total fluxes to the Amazon River plume region, respectively. While this contribution is relatively small, it may be influenced by future changes to the basin’s land use and hydrology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The scoping, design, and plasma physics optimization of the Eos neutron source stellarator

On the path to a fusion pilot plant, Thea Energy plans to build Eos, a sub-breakeven, deuterium-deuterium, beam-target fusion, stellarator neutron source facility for producing tritium and other valuable radioisotopes. In this paper, a set of 1D plasma physics models are coupled and used to design the operating point of the facility and predict performance. At this foundational stage of the design, analytic and approximate models are sufficient to capture the leading-order effects, and fast enough to run in the inner loop of an optimizer. Higher-fidelity analyses will follow. Models of 1D profile-dependent neutral beam stopping, ion beam slowing down, beam-target fusion, electron-ion classical heat transfer, energy confinement (ISS04), beam pressure, beam heating of ions and electrons, beam-beam fusion fraction, and neutral beam injection and gyrotron heating electrical efficiencies are included. A numerical optimizer is used to determine the minimum required facility electric power to generate tritium at a given rate. A potentially advantageous regime is described in which modern precisely-quasisymmetric stellarators, new high-temperature superconductors, ITER-derived neutral beam injection, and new high-frequency gyrotrons enable a suitible target plasma with hot electrons, cold ions, peaked density and temperature profiles, and high beam-injected ion density. It appears possible at this time for a facility with a medium-scale and medium-strength stellarator whose required facility electric power is less than 40 MW to produce $2.5\times 10^{17}$ neutrons s -1 for the production of radioisotopes. With the addition of a tritium breeding blanket, such a facility could produce 0.2 grams d -1 or 70 grams yr -1 of tritium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

CarcSeq Measurement of Rat Mammary Cancer Driver Mutations and Relation to Spontaneous Mammary Neoplasia

Abstract The ability to deduce carcinogenic potential from subchronic, repeat dose rodent studies would constitute a major advance in chemical safety assessment and drug development. This study investigated an error-corrected NGS method (CarcSeq) for quantifying cancer driver mutations (CDMs) and deriving a metric of clonal expansion predictive of future neoplastic potential. CarcSeq was designed to interrogate subsets of amplicons encompassing hotspot CDMs applicable to a variety of cancers. Previously, normal human breast DNA was analyzed by CarcSeq and metrics based on mammary-specific CDMs were correlated with tissue donor age, a surrogate of breast cancer risk. Here we report development of parallel methodologies for rat. The utility of the rat CarcSeq method for predicting neoplastic potential was investigated by analyzing mammary tissue of 16-week-old untreated rats with known differences in spontaneous mammary neoplasia (Fischer 344, Wistar Han, and Sprague Dawley). Hundreds of mutants with mutant fractions ≥ 10−4 were quantified in each strain, most were recurrent mutations, and 42.5% of the nonsynonymous mutations have human homologs. Mutants in the mammary-specific target of the most tumor-sensitive strain (Sprague Dawley) showed the greatest nonsynonymous/synonymous mutation ratio, indicative of positive selection consistent with clonal expansion. For the mammary-specific target (Hras, Pik3ca, and Tp53 amplicons), median absolute deviation correlated with percentages of rats that develop spontaneous mammary neoplasia at 104 weeks (Pearson r = 1.0000, 1-tailed p = .0010). Therefore, this study produced evidence CarcSeq analysis of spontaneously occurring CDMs can be used to derive an early metric of clonal expansion relatable to long-term neoplastic outcome.

McKim, Karen L.↗