Search NASA⌕ Search

SEARCH · Search NASA

Results for “Gamma spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

428 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

The spectra of IceCube Neutrino (SIN) candidate sources – III. Optical spectroscopy and source characterization of the full sample

A correlation between astrophysical high-energy neutrinos and blazars has been suggested by various authors. In particular, a likely association between IceCube events and intermediate- and high-energy peaked BL Lac objects has led to a sample of 47 objects having a high probability of being neutrino sources. In the first paper of this series we reported optical spectroscopy of 17 objects, which together with data taken from the literature covered 80 per cent of the sample. Here, we present spectroscopy obtained at large aperture telescopes of a further 17 objects (plus four additional targets), which completes the sample coverage. For 12 objects we are able to determine the redshift (0.07 < z < 1.6), while for the others we set a lower limit on it, based on either the robust detection of intervening absorption systems or on an estimation derived from the absence of spectral signatures of the host galaxy. With these new data we expand and reinforce the main results of our previous papers, namely the fact that in terms of their broad-band properties our sources appear to be indistinguishable from the rest of the blazar population and the relatively large (>34 per cent and possibly as high as 80 per cent) fraction of masquerading BL Lac objects, for which the low equivalent width of the emission lines is due to the brightness of the boosted continuum, rather than being an intrinsic property, in our sample.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Balmer emission measurements in JET-ILW hydrogen, deuterium, tritium and deuterium-tritium low-confinement mode plasmas

Measurements of Balmer-alpha (B-α) and Balmer-gamma (B-γ), where B = H, D, or T isotopes of hydrogen, emission across the low-field side (LFS) divertor in JET ITER-like Wall (ILW), low-confinement mode (L-mode) plasma indicate that the divertor plasma was more strongly detached in deuterium, tritium and deuterium–tritium than in hydrogen plasmas. These measurements are consistent with the lower degree of detachment in hydrogen versus tritium plasmas inferred from Langmuir probes (Groth et al., 2023). The ratio of B-γ to B-α is a suitable indicator of high density/low temperature conditions because B-α emission is dominated by electron impact excitation with a small electron–ion recombination component regardless of electron temperature and density (for conditions in tokamak plasmas) whilst for B-γ the recombination component increases and the excitation component decreases as the electron temperature decreases and the electron density increases. Within the uncertainty of the measurements, the electron density at the low-field side separatrix and the power crossing the separatrix are similar to permit these comparisons. The B-©/B-α ratio is well correlated with the onset of detachment as measured by Langmuir probes (McCracken et al., 1998; Groth et al., 2023). The ratios of B-γ and B-α varied between 0.005 and 0.035 for low-recycling, high-recycling and partially detached conditions, and were 60–70 % higher in partially detached hydrogen than in tritium plasmas. In contrast, the difference between deuterium, tritium and 40–60 % deuterium–tritium is within 10 % and thus within the uncertainties of the measurements. Profiles of the B-α and B-γ emission was measured with two filtered CCDs connected to the visible lost light leg of JET’s mirror link spectroscopy system (Meigs et al., 2010; Lomanowski et al., 2014). Spatially (radial) narrower B-α profiles were measured with increasing isotope mass, while similarly broadened B-γ profiles were measured.

Balmer↗
DOE OSTI2021

The spectra of IceCube neutrino (SIN) candidate sources – II. Source characterization

ABSTRACT Eight years after the first detection of high-energy astrophysical neutrinos by IceCube, we are still almost clueless as regards to their origin, although the case for blazars being neutrino sources is getting stronger. After the first significant association at the $3\!-\!3.5\, \sigma$ level in time and space with IceCube neutrinos, i.e. the blazar TXS 0506+056 at z = 0.3365, some of us have in fact selected a unique sample of 47 blazars, out of which ∼16 could be associated with individual neutrino track events detected by IceCube. Building upon our recent spectroscopy work on these objects, here we characterize them to determine their real nature and check if they are different from the rest of the blazar population. For the first time we also present a systematic study of the frequency of masquerading BL Lacs, i.e. flat-spectrum radio quasars with their broad lines swamped by non-thermal jet emission, in a γ-ray- and IceCube-selected sample, finding a fraction >24 per cent and possibly as high as 80 per cent. In terms of their broad-band properties, our sources appear to be indistinguishable from the rest of the blazar population. We also discuss two theoretical scenarios for neutrino emission, one in which neutrinos are produced in interactions of protons with jet photons and one in which the target photons are from the broad-line region. Both scenarios can equally account for the neutrino–blazar correlation observed by some of us. Future observations with neutrino telescopes and X-ray satellites will test them out.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Bioaccumulation of contaminants in Scarabaeidae and Silphidae beetles at sites polluted by coal combustion residuals and radiocesium

Anthropogenic contamination from coal-fired power plants and nuclear reactors is a pervasive issue impacting ecosystems across the globe. As a result, it is critical that studies continue to assess the accumulation and effects of trace elements and radionuclides in a diversity of biota. In particular, bioindicator species are a powerful tool for risk assessment of chemically contaminated habitats. Using inductively coupled plasma mass spectrometry (ICP-MS) and auto-gamma counting, we analyzed trace element and radiocesium contaminant concentrations in Scarabaeidae and Silphidae beetles (Order: Coleoptera), important taxa in decomposition and nutrient cycling, at contaminated and reference sites on the Savannah River Site, South Carolina, U.S. Our results revealed variability in trace element concentrations between Scarabaeidae and Silphidae beetles at uncontaminated and contaminated sites. Compared to Scarabaeidae, Silphidae had higher levels of chromium (Cr), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), and zinc (Zn). Unexpectedly, concentrations of Cr, Cu, and Ni were higher in both taxa at the uncontaminated sites. Scarabaeidae and Silphidae beetles at the coal combustion waste site consistently had high concentrations of arsenic (As), and Scarabaeidae had high concentrations of selenium (Se). Of the 50 beetles analyzed for radiocesium levels, two had elevated radioactivity concentrations, both of which were from a site contaminated with radionuclides. Furthermore, our results suggest carrion beetles may be particularly sensitive to bioaccumulation of contaminants due to their trophic position and role in decomposition, and thus are useful sentinels of trace element and radionuclide contamination.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Experimental study of the 34 m Cl beam production at intermediate energies

Here the isomeric content of a 34 Cl beam produced in the intermediate-energy projectile fragmentation of a 150 MeV/u 36 Ar beam on a 3 mm-thick Be target was studied. β-delayed γ-ray spectroscopy was used to measure the population of 34 Cl fragments in the ground vs. isomeric states at zero degrees relative to the incoming primary beam for four different momentum settings of the fragment separator near the predicted central velocity of these fragments, as well as, at two non-zero-degree settings for one momentum setting. Of the settings explored, which excluded rigidities within 0.5% of the value predicted to maximize total 34 Cl yield due to unreacted primary beam, the maximum rate for the production of Cl was found at a rigidity setting 0.75% below the predicted peak 34 Cl yield. The maximum population of the isomeric state relative to the ground state was observed at a rigidity 1.25% below the predicted maximum 34 Cl yield. Studies such as this are important in generating the understanding needed for producing isomer-enriched rare-isotope beams.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

First Examination of Irradiated Fuel with Pulsed Neutrons at LANSCE (Preliminary Results)

We present preliminary results on the characterization of an irradiated U-lOZr-lPd fuel sample that was prepared from the irradiated AFC-3A-R5A sample. U-lOZr metallic fuels are researched as host materials for potential transmutation fuels and the addition of palladium strives to bind lanthanides, thus preventing fuel-cladding chemical interactions (FCCI). These interactions limit the lifetime of metallic fuels and are caused by migration of lanthanide fission products to the periphery of the fuel slug, where they start to interact with the D9 or HT9 steel cladding, ultimately leading to failure of the mechanical integrity of the cladding. Neutrons offer bulk characterization of irradiated materials for which X-ray tomography methods are not suitable due to the immense gamma background emitted from the samples. In particular pulsed neutrons provide information from the ability to resolve the neutron energy using their time-of-flight and thus the potential to utilize neutron absorption resonance to characterize the spatial distribution of isotopes. This, in turn, may allow to characterize the distribution of fission and neutron capture products non-destructively and may ultimately be applied to the bulk of an irradiation capsule prior to destructive post-irradiation examination to identify regions of interest. To allow the characterization of entire irradiation capsules, a cask is under development in the advanced post-irradiation work package at LANL and progress on this development was reported elsewhere. In parallel, an irradiated U-lOZr-lPd sample cut from the AFC-3AR5A irradiation was shipped to LANL and will be fully characterized with an NSUF funded rapid turnaround experiment (RTE) in the 2020 LANSCE run cycle. The sample emits at a dose rate of ~3R/hr on contact and is therefore manageable with remote handling, without requiring a cask. The disk-shaped material is larger than samples prepared for analysis using electron or X-ray methods and is therefore an intermediate step towards characterization of bulk samples at LANSCE. However, since it covers the full diameter of the irradiated fuel slug, some insight on redistribution of elements, spatially resolved information on microstructure, e.g. phase composition and texture, will be possible using the pulsed neutron-based methods developed for fuel characterization at LANSCE. This report describes the development of procedures to handle the sample at LANSCE as well as preliminary data and results from tests conducted in December 2019 on the energy-resolved neutron imaging (ERNI) beam line at flight path 5 and the high pressure-preferred orientation diffractometer (HIPPO) at LANSCE. This effort is a collaboration between LANL, INL, and ORNL. To compare our capabilities with prior work, we present an overview of previously reported bulk characterization of irradiated or spent fuels. The overview addresses neutron diffraction and neutron absorption resonance spectroscopy, both of which have only few reported applications on irradiated or spent nuclear fuel, as well as neutron radiography. This literature review was already described in a previous report but is repeated here to put our current efforts in context of previous work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Mg and Al-induced phase transformation and stabilization of Ga 2 O 3 -based $\gamma$-phase spinels

Ga 2 O 3 films were deposited on (100) MgAl 2 O 4 spinel substrates at 550, 650, 750, and 850 °C using metal-organic chemical vapor deposition and investigated using x-ray diffraction and transmission electron microscopy. A phase-pure γ-Ga 2 O 3 -based material having an inverse spinel structure was formed at 850 °C; a mixture of the γ-phase and β-Ga 2 O 3 was detected in films grown at 750 °C. Only β-Ga 2 O 3 was determined in the films deposited at 650 and 550 °C. A β- to γ-phase transition occurred from the substrate/film interface during growth at 750 °C. The growth and stabilization of the γ-phase at the outset of film growth at 850 °C was affected by the substantial Mg and Al chemical interdiffusion from the MgAl 2 O 4 substrate observed in the energy-dispersive x-ray spectrum. Further, atomic-scale investigations via scanning transmission electron microscopy of the films grown at 750 and 850 °C revealed a strong tetrahedral site preference for Ga and an octahedral site preference for Mg and Al. It is postulated that the occupation of these atoms in these particular sites drives the β-Ga 2 O 3 to γ-phase transition and markedly enhances the thermal stability of the latter phase at elevated temperatures.

42 ENGINEERING↗
DOE OSTI2026

Programmable Phase Selection between Altermagnetic and Noncentrosymmetric Polymorphs of MnTe on InP via Molecular Beam Epitaxy

This dataset contains DFT input and output files supporting the theoretical modeling in the associated publication (ACS Appl. Mater. Interfaces 2026, 18, 15654-15664). The calculations model the interfacial energetics of two MnTe polymorphs — NiAs-MnTe (hexagonal, alpha phase) and ZnS-MnTe (cubic, gamma phase) — on InP(111) substrates with two surface terminations: In-terminated InP(111)A and P-terminated InP(111)B. This gives four interface configurations: NiAs on In-terminated (experimentally observed), NiAs on P-terminated (computed for comparison), ZnS on In-terminated (computed for comparison), and ZnS on P-terminated (experimentally observed). The dataset is organized into four calculation types, each covering all four polymorph/termination combinations: (i) Slabs: Pristine MnTe/InP heterostructure slabs used to compute total energies and interface energy densities (Eint) for all four configurations, as reported in Fig. 6 of the main text. (ii) Disorder: Same slab geometries with a P_Te + Te_P antisite defect pair introduced near the interface, used to assess chemical intermixing effects on interface stability (Fig. S8, SI). (iii) Strain: Pristine slab calculations with in-plane lattice parameters strained by -1% and +1% relative to the InP lattice constant, used to evaluate strain-dependent interface energetics (Fig. S9, SI). (iv) Charge_Density: Single-point calculations on the full heterostructure, the isolated InP slab, and the isolated MnTe slab at fixed geometry, used to compute differential charge density plots showing interfacial charge accumulation and depletion as a function of surface termination (Fig. S10, SI). Each calculation folder contains INCAR, KPOINTS, POSCAR, CONTCAR, OUTCAR, and POTCAR_info.txt (PAW potential information, excluding the full POTCAR due to VASP licensing restrictions). The calculations were performed using VASP 6.4.3 with PBE exchange-correlation, PAW potentials, a Hubbard correction of Ueff = 5 eV on Mn d-states, and A-type AFM spin initialization.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Structure of high-lying excited states in 47 Ca with ℓ ≥ 3 populated in fast-beam 𝛾-ray-tagged one-neutron pickup reactions

Located just one neutron removed from doubly magic, stable 48 Ca, the adjacent isotope 47 Ca has been studied extensively with neutron-removing transfer reactions and interpreted within a shell-model picture. Neutron-adding transfer reactions onto the stable 46 Ca, however, have not been performed in nearly 60 years and never with the aid of high-resolution 𝛾-ray spectroscopy. Here, we report on the 12 C⁡( 46 , Ca 47 Ca+𝛾)⁢𝑋 one-neutron pickup reaction from 12 C onto 46 Ca at more than 50 MeV/nucleon, a regime of orbital angular momentum mismatch that selectively populates 47 Ca final states based on ℓ ≥ 3 neutron configurations. Newly observed excited states and 𝛾-ray transitions are discussed in comparison to 𝑓⁡𝑝 shell-model calculations in a variety of configuration spaces. Furthermore, it is shown that the nature of the observed spectrum of final states can be well interpreted, albeit with a significant fragmentation of the 𝜈⁢0⁢𝑓 5/2 strength observed in the measurement that is not borne out in the structure calculations.

39 ≤ A ≤ 58↗
DOE OSTI2021

Study of ${\mathrm{B}}_{\mathrm{s}}^0$ → J/ψπ + π – K + K – decays

The decays ${\mathrm{B}}_{\mathrm{s}}^0$ → J/ψπ + π – K + K – are studied using a data set corresponding to an integrated luminosity of 9 fb –1 , collected with the LHCb detector in proton-proton collisions at centre-of-mass energies of 7, 8 and 13 TeV. The decays ${\mathrm{B}}_{\mathrm{s}}^0$ → $\mathrm{J}/{ψ \mathrm{K}}^{\ast 0}{\overline{\mathrm{K}}}^{\ast 0}$ and ${\mathrm{B}}_{\mathrm{s}}^0$ → χ c1 (3872)K + K – , where the K + K – pair does not originate from a Φ meson, are observed for the first time. Precise measurements of the ratios of branching fractions between intermediate χ c1 (3872)Φ, $\mathrm{J}/{ψ \mathrm{K}}^{\ast 0}{\overline{\mathrm{K}}}^{\ast 0}$, ψ(2S)Φ and χ c1 (3872)K + K – states are reported. A structure, denoted as X(4740), is observed in the J/ψΦ mass spectrum and, assuming a Breit-Wigner parameterisation, its mass and width are determined to be ${\displaystyle \begin{array}{c}{m}_{\mathrm{X}(4740)}=4741\pm 6\pm 6\kern0.5em \mathrm{MeV}/{c}^2,\\ {}{\Gamma}_{\mathrm{X}(4740)}=53\pm 15\pm 11\kern0.5em \mathrm{MeV},\end{array}}$ where the first uncertainty is statistical and the second is systematic. In addition, the most precise single measurement of the mass of the ${\mathrm{B}}_{\mathrm{s}}^0$ meson is performed and gives a value of ${m}_{{\mathrm{B}}_{\mathrm{s}}^0}=5366.98\pm 0.07\pm 0.13\kern0.5em \mathrm{MeV}/{c}^2.$

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Plasmonic Ag nanocomposite phosphate glasses produced via γ-ray irradiation as reduction route

This paper reports on the impact of γ-ray irradiation (10, 100 kGy) on melt-quenched Ag + -doped phosphate glass and the effects of subsequent thermal processing leading to the production of plasmonic Ag nanocomposites. The γ-irradiated glasses were characterized alongside the pristine by differential scanning calorimetry (DSC), Raman spectroscopy, electron paramagnetic resonance (EPR) spectroscopy, optical absorption, and photoluminescence (PL) spectroscopy. DSC characterization showed consistent glass transition temperatures (T g ) before and after γ-irradiation whereas the crystallization temperatures tended to decrease with increasing γ-ray dose. However, a lack of alteration of the glass network structure was supported by Raman spectroscopy. Room temperature EPR spectra clearly showed the formation of phosphorus oxygen hole center (POHC) defects in the undoped host, in addition to another doublet likely associated with a P 3 defect. The presence of paramagnetic silver species encompassing Ag 2+ and 107/109 Ag 0 atoms was also indicated in the silver-activated glass together with POHC defects. Optical absorption spectra were also consistent with the presence of various radiation-induced centers. Further analyzing the glass absorption edge via Tauc plots suggested the formation of electron center (EC) defects in γ-irradiated samples wherein the silver-doped glass exhibited decreasing band gap energies with increasing γ-ray dose. The PL characterization showed the silver-related radio-PL effect was induced exhibiting broad band emission with two maxima around 500 and 625 nm stemming from various molecular Ag$^{x+}_{n}$ clusters. Emission decay analyses revealed that the longer wavelength emission exhibited slower decay. The highest radiation dose of 100 kGy however resulted in weaker emission and faster decay kinetics attributed to energy transfer between the luminescent silver species and POHC defects. Finally subjecting the γ-irradiated Ag-doped glasses to heat treatment near the T g at 490 °C led to the development of the surface plasmon resonance of Ag nanoparticles (NPs) and the vanishing of the Ag$^{x+}_{n}$ clusters luminescence. In conclusion, the presence of the matrix-related EC defects was deemed accountable for the thermally induced reduction and consequent precipitation of Ag NPs making the plasmonic glasses attractive for photonic applications such as nonlinear optics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Level structures of 56,58 Ca cast doubt on a doubly magic 60 Ca

Gamma decays were observed in 56 Ca and 58 Ca following quasi-free one-proton knockout reactions from 57,59 Sc beams at ≈200 MeV/nucleon. For 56 Ca, a γ ray transition was measured to be 1456(12) keV, while for 58 Ca an indication for a transition was observed at 1115(34) keV. Both transitions were tentatively assigned as the $2^{+}_{1}\rightarrow0^{+}_{gs}$ decays, and were compared to results from ab initio and conventional shell-model approaches. A shell-model calculation in a wide model space with a marginally modified effective nucleon-nucleon interaction depicts excellent agreement with experiment for $2^{+}_{1}$ level energies, two-neutron separation energies, and reaction cross sections, corroborating the formation of a new nuclear shell above the N = 34 shell. Its constituents, the 0$f$ 5/2 and 0$g$ 9/2 orbitals, are almost degenerate. This degeneracy precludes the possibility for a doubly magic 60 Ca and potentially drives the dripline of Ca isotopes to 70 Ca or even beyond.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Using Robotic Manipulators for Radioactive Waste Inspection - 20090

The global nuclear industry has a growing volume of nuclear waste which needs to be scanned, sorted according to its activity and material type, then processed into the correct waste packages for long term storage and disposal. It is vital that there is a detailed understanding of the waste inventory stored in long term waste containers, as knowledge of their contents could predict or prevent any adverse effects in storage. The numerous 'scan and sort' tables which are currently used at many different facilities around the world to sort waste into their correct containers are human operated and require very slow gamma scanning procedures combined with educated guesswork to manually sort the waste. This often leads to excessive conservatisms, with placement of lower activity wastes in higher activity containers, which in turn costs significantly more to store. In the United Kingdom it costs UK Pounds 46 k per cubic meter to store intermediate level waste compared to just UK Pound 2.9 k per cubic meter to store low level waste according to a 2008 Department of Energy and Climate Change report in the UK. A proposed solution to this problem, is the use of a robotic manipulator to automatically inspect the 'scan and sort table' in order to produce an accurate 3D model of the table's waste contents and attach an overlaid radiation map. The radiation map contains spectrometry data and can in consequence be used to distinguish and locate specific radioisotopes. The 3D model should be as accurate as possible in order to allow for a second robot arm with an attached gripper to grasp the objects and place them into their designated long-term storage container. Various scanning procedures are explored in this study including basic raster scanning, adaptive raster scanning and point sampling. The optimal solution will in practice be defined by the required application and activity level of the wastes being inspected. The results presented in this study indicate that it is possible to produce a centimeter accurate 3D model of a mixed assortment of components on a nuclear waste 'scan and sort' table. In addition, it was shown that the waste objects emitting radiation could be accurately identified and located, with an overlaid radiation map. This study is applicable across the nuclear waste management sector. Many of the ideas and concepts developed in this study are applicable in other decommissioning settings for example, dismantling of legacy gloveboxes or routine inspection of nuclear waste packages in storage. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Study of η(1405)/η(1475) in $J/\psi \to \gamma {K}_S^0{K}_S^0{\pi}^0$ decay

Using a sample of (10 . 09 ± 0 . 04) × 10 9 J/ψ decays collected with the BESIII detector, partial wave analyses of the decay $ J/\psi \to \gamma {K}_S^0{K}_S^0{\pi}^0$ are performed within the ${K}_S^0{K}_S^0{\pi}^0$ invariant mass region below 1.6 GeV/ c 2 . The covariant tensor amplitude method is used in both mass independent and mass dependent approaches. Both analysis approaches exhibit dominant pseudoscalar and axial vector components, and show good consistency for the other individual components. Furthermore, the mass dependent analysis reveals that the ${K}_S^0{K}_S^0{\pi}^0$ invariant mass spectrum for the pseudoscalar component can be well described with two isoscalar resonant states using relativistic Breit-Wigner model, i.e., the η (1405) with a mass of $1391.7\pm {0.7}_{-0.3}^{+11.3}$ MeV/ c 2 and a width of $60.8\pm {1.2}_{-12.0}^{+5.5}$ MeV, and the η (1475) with a mass of $1507.6\pm {1.6}_{-32.2}^{+15.5}$ MeV/ c 2 and a width of $115.8\pm {2.4}_{-10.9}^{+14.8}$ MeV. The first and second uncertainties are statistical and systematic, respectively. Alternate models for the pseudoscalar component are also tested, but the description of the ${K}_S^0{K}_S^0{\pi}^0$ invariant mass spectrum deteriorates significantly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗