Search NASA⌕ Search

SEARCH · Search NASA

Results for “Graph properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Chemical State of Surface Oxygen on Carbon and Its Effects on the Capacity of the Carbon Anode in a Lithium-Ion Battery Investigated

In a lithium-ion battery, the lithium-storage capacity of the carbon anode is greatly affected by a surface layer formed during the first half cycle of lithium insertion and release into and out of the carbon anode. The formation of this solid-electrolyte interface, in turn, is affected by the chemistry of the carbon surface. A study at the NASA Glenn Research Center examined the cause-and-effect relations. Information obtained from this research could contribute in designing a high-capacity lithium-ion battery and, therefore, small, powerful spacecraft. In one test, three types of surfaces were examined: (1) a surface with low oxygen content (1.5 at.%) and a high concentration of active sites, (2) a surface with 4.5 at.% -OH or -OC type oxygen, and (3) a surface with 6.5 at.% O=C type oxygen. The samples were made from the same precursor and had similar bulk properties. They were tested under a constant current of 10 mA/g in half cells that used lithium metal as the counter electrode and 0.5 M lithium iodide in 50/50 (vol%) ethylene carbonate and dimethyl carbonate as the electrolyte. For the first cycle of the electrochemical test, the graph describes the voltage of the carbon anode versus the lithium metal as a function of the capacity (amount of lithium insertion or release). From these data, it can be observed that the surface with low oxygen and a high concentration of active sites could result in a high irreversible capacity. Such a high irreversible capacity could be prevented if the active sites were allowed to react with oxygen in air, producing -OH or -OC type oxygen. The O=C type oxygen, on the other hand, could greatly reduce the capacity of lithium intercalation and, therefore, needs to be avoided during battery fabrication.

Hung, Ching-Cheh↗
DOE OSTI2017

Distributed Energy Resources Customer Adoption Model - Graphical User Interface, Version 2.1.8

The DER-CAM Graphical User Interface has been redesigned to consist of a dynamic tree structure on the left side of the application window to allow users to quickly navigate between different data categories and views. Views can either be tables with model parameters and input data, the optimization results, or a graphical interface to draw circuit topology and visualize investment results. The model parameters and input data consist of tables where values are assigned to specific keys. The aggregation of all model parameters and input data amounts to the data required to build a DER-CAM model, and is passed to the GAMS solver when users initiate the DER-CAM optimization process. Passing data to the GAMS solver relies on the use of a Java server that handles DER-CAM requests, queuing, and results delivery. This component of the DER-CAM GUI can be deployed either locally or remotely, and constitutes an intermediate step between the user data input and manipulation, and the execution of a DER-CAM optimization in the GAMS engine. The results view shows the results of the DER-CAM optimization and distinguishes between a single and a multi-objective process. The single optimization runs the DER-CAM optimization once and presents the results as a combination of summary charts and hourly dispatch profiles. The multi-objective optimization process consists of a sequence of runs initiated by the GUI, including: 1) CO2 minimization, 2) cost minimization, 3) a user defined number of points in-between objectives 1) and 2). The multi-objective results view includes both access to the detailed results of each point generated by the process as well as the generation of a Pareto Frontier graph to illustrate the trade-off between objectives. DER-CAM GUI 2.1.8 also introduces the ability to graphically generate circuit topologies, enabling support to DER-CAM 5.0.0. This feature consists of: 1) The drawing area, where users can manually create nodes and define their properties (e.g. point of common coupling, slack bus, load) and connect them through edges representing either power lines, transformers, or heat pipes, all with user defined characteristics (e.g., length, ampacity, inductance, or heat loss); 2) The tables, which display the user-defined topology in the final numerical form that will be passed to the DER-CAM optimization. Finally, the DER-CAM GUI is also deployed with a database schema that allows users to provide different energy load profiles, solar irradiance profiles, and tariff data, that can be stored locally and later used in any DER-CAM model. However, no real data will be delivered with this version.

Ewald, Friedrich↗
NASA NTRS1987

Incompressible magnetohydrodynamic surface waves - Nonlinear aspects

The nonlinear properties of MHD surface waves in the solar atmosphere are investigated analytically, assuming that the fluid is incompressible and that the waves are confined to a single surface, with semiinfinite regions on both sides. The governing equations are derived in detail, and qualitative results are presented in a graph. For propagating waves, second-order terms in the wave amplitude are found to lead to wave steepening at leading or trailing edges, the steepening rate becoming very large as the threshold for the linear Kelvin-Helmholtz instability is approached. Second-order effects on standing waves include crest and trough sharpening (increasing with time), a current independent of distance on the surface but decreasing exponentially with distance from the surface, and pressure-field fluctuations of infinite extent. It is suggested that these effects could account for a large fraction of solar-atmosphere heating.

Hollweg, Joseph V.↗
NASA NTRS1930

Collection of wind-tunnel data on commonly used wing sections

This report groups in a uniform manner the aerodynamic properties of commonly used wing sections as determined from tests in various wind tunnels. The data have been collected from reports of a number of laboratories. Where necessary, transformation has been made to the absolute system of coefficients and tunnel wall interference corrections have been applied. Tables and graphs present the data in the various forms useful to the engineer in the selection of a wing section.

Louden, F A↗
NASA NTRS1995

Distributed state-space generation of discrete-state stochastic models

High-level formalisms such as stochastic Petri nets can be used to model complex systems. Analysis of logical and numerical properties of these models of ten requires the generation and storage of the entire underlying state space. This imposes practical limitations on the types of systems which can be modeled. Because of the vast amount of memory consumed, we investigate distributed algorithms for the generation of state space graphs. The distributed construction allows us to take advantage of the combined memory readily available on a network of workstations. The key technical problem is to find effective methods for on-the-fly partitioning, so that the state space is evenly distributed among processors. In this paper we report on the implementation of a distributed state-space generator that may be linked to a number of existing system modeling tools. We discuss partitioning strategies in the context of Petri net models, and report on performance observed on a network of workstations, as well as on a distributed memory multi-computer.

Ciardo, Gianfranco↗
DOE OSTI2026

Analog and symbolic computation through the Koopman framework

We develop a Koopman operator framework for studying the computational structure of dynamical systems. Specifically, we show that the resolvent of the Koopman operator provides a natural abstraction of halting, yielding a ‘Koopman halting problem’ that is recursively enumerable in general. For symbolic systems, such as those defined on Cantor space, this operator formulation captures reachability between clopen sets, while for equicontinuous systems we prove that the Koopman halting problem is decidable. Our framework demonstrates that absorbing (halting) states in coarse-grained finite automata correspond to Koopman eigenfunctions with eigenvalue one, while cycles in the transition graph impose spectral constraints associated with periodic dynamics. These results provide a unifying perspective on computation in symbolic and analog systems, showing how computational universality is reflected in operator spectra, invariant subspaces, and algebraic structures. Beyond symbolic dynamics, this operator-theoretic lens opens pathways to analyze the computational properties of a broader class of dynamical systems, including polynomial and analog models, and suggests that computational hardness may admit dynamical signatures in terms of Koopman spectral structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

DOE STTR Phase I Final Report Report: Machine-learning Based Prediction of Thermal Limits for Conjugated Organic Materials

The SCANN-DT Phase I STTR project led by NLM Photonics and partnering with the National Renewable Energy Laboratory (NREL) sought to apply machine learning techniques based on graph neural networks (GNNs) towards the prediction of decomposition temperatures (Td) of organic semiconductors, based on prior work on bond dissociation energy (BDE) prediction as implemented in NREL’s ALFABET prediction tool. Using a curated set of experimental decomposition energies, the project examined GNN-based, classical quantitative structure-property relationship (QSPR) based on DFT calculations, and combinations of both methods to predict Td. While the best MAEs in Td achieved were near 40°C, below project targets, the project led to improvements in the ALFABET model, improvements in cloud-based implementations of NWChem software, and a substantial dataset of calculations on medium-sized conjugated organic molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Study on Contrastive Graph Neural Network Pretraining for Predicting Transcriptome Profiles

We study graph neural network learning for transcriptomics with limited amount of labeled data. Our study reveals that simple GNN architectures perform well and do not suffer from over-fitting as the more sophisticated ones. Our study shows that although contrastive learning as a pretraining strategy has been successful in predicting properties such as formation and binding energy, it is not effective for transcriptomics.

Ma, Jiaji [University of Virginia]↗
DOE OSTI2020

Oak Ridge National Laboratory Technical Input for the Nuclear Regulatory Commission Review of the 2017 Edition of ASME Section III, Division 5, ‘High Temperature Reactors’

To assist the Nuclear Regulatory Commission in its decision making on endorsement of the American Society for Mechanical Engineers Boiler and Pressure Vessel Code Section III, Division 5 (2017 Edition) for development of advanced non-light water reactors, the following Division 5 portions were reviewed: Article HBB-2000 Material; Article HCB-2000 Material; Article HGB-2000 Material; Mandatory Appendix HBB-I-14 Tables and Figures; and, Nonmandatory Appendix HBB-U Guidelines for Restricted Material Specifications to Improve Performance in Certain Service Applications. In addition to the 2017 Edition, the same parts of the 2019 Edition have also been reviewed as indicated in various sections of the report. This review was conducted by a collaboration of national laboratory and private sector participants with significant industrial experience, including some heavy lifting and deep diving from Clarus Consulting, LLC., all intended to achieve an objective, independent, and practical perspective. The report provides recommendations, descriptions of the evaluation methods, and the source references for the data used. To build confidence required for endorsement of the Code, this review was conducted as a verification and validation of the above Code contents. The objective of verification is to ensure that the Code is free of error – direct or implied; contains the information needed for its use, including proper coverage of the Code-specified materials for the intended application, and completeness and adequacy of references to other portions of the Code. The objective of validation is to authenticate that the Code tabulations and graphs represent design inputs consistent with what are determined using rules and methods specified by the Code. The authentication process used data that were assembled and/or generated independent of Code development, while the methods of analysis followed Code-specified methods where appropriate. The designated portions for this review cover the five alloys codified for high temperature reactor applications in Division 5, i.e. 316 SS, 304 SS, 800H, 2¼Cr-1Mo, and 9Cr-1Mo-V, regarding their general requirements, permitted specifications and design stress intensity values for pressure-retaining applications, deterioration in service, fatigue acceptance test, permissible weld materials, tensile and yield strength, expected minimum stress-to-rupture values (including for Alloy 718), weld stress rupture factors, permissible materials for bolting use, and restricted specifications in certain service applications. Additionally, stress intensity values for bolting materials including 316 SS, 304 SS and alloy 718 were reviewed. Analysis and discussion are also provided on contents outside of these designated Code portions where it was deemed relevant and necessary to develop a technically sound understanding of issues relating to the designated portions. Due to unavailability of sufficient test data on welds during the review period, the weld stress rupture factors in Tables HBB-I-10.14A to E, which cover a total of ten tables for the five alloys welded with twenty-eight different weld metals (some with similar properties), have been deferred to a future review effort. The review identified mainly two types of issues. The first type includes instances where the Code is found factually incomplete or incorrect, such as obsolete materials specifications listings, missing tabulation of stresses for bolting. Changes to the Code are recommended in these cases. The second type of issue includes instances where the Code tabulations and graphs are found to be less conservative than the review analysis results. In these cases, recommendations are made for further review and consideration where the difference in conservatism exceeds 10%, which is our threshold for questioning technical adequacy, meriting a risk assessment by the Nuclear Regulatory Commission and/or reactor designers. It is noted that this effort has been executed using all available data and established methods of analysis, including methods and criteria specified and used by the Code. As such, the findings that are presented in quantitative detail, in a format for convenient comparison with the Code, and with identification of where further review is recommended, should provide a sound technical basis for decisions about quantifying the implications of the reduced design margins and technical adequacy/inadequacy to form a basis for conditioning specific Code tabulation values on endorsement. Recommendations for specific changes to the Code, however, entail design conservatism considerations beyond the scope of this review effort, and are not made in this report.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2018

Networks of pipelines for gas with nonconstant compressibility factor: stationary states

For the management of gas transportation networks, it is essential to know how the stationary states of the system are determined by the boundary data. The isothermal Euler equations are an accurate pde-model for the gas flow through each pipe. A compressibility factor is used to model the nonlinear relationship between density and pressure that occurs in real gas in contrast to ideal gas. The gas flow through the nodes is governed by algebraic node conditions that require the conservation of mass and the continuity of the pressure. We examine networks that are described by arbitrary finite graphs and show that for suitably chosen boundary data, subsonic stationary states exist and are uniquely determined by the boundary data. Our construction of the stationary states is based upon explicit representations of the stationary states on each single pipe that can easily be evaluated numerically. We also use the monotonicity properties of these states as functions of the boundary data.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1984

Remote sensing of floe size distribution and surface topography

Floe size can be measured by several properties p- for instance, area or mean caliper diameter. Two definitions of floe size distribution seem particularly useful. F(p), the fraction of area covered by floes no smaller than p; and N(p), the number of floes per unit area no smaller than p. Several summertime distributions measured are a graph, their slopes range from -1.7 to -2.5. The variance of an estimate is also calculated.

Rothrock, D. A.↗
DOE OSTI2022

Development of Multimodal Few-Shot Analytics for Electron Micrographs

Recent advances in materials data analytics have provided new avenues for determining process-structure-property (PSP) linkages in a variety of materials. Machine learning techniques including few-shot learning have increased the efficiency of classifying microscopy images for the purposes of material characterization. Attempts at creating a multimodal approach can provide further improvements to current models and help extract more salient features from data. In this vein, raw spectrum data was taken to provide an additional modality to our current pyCHIP classifier. Modifications in segmentation also show potential in improving the accuracy of the pyCHIP classifier. Classifier output was analyzed using network graphs and unsupervised clustering algorithms such as spectral clustering to detect better segmentation methods than the current “chipping” approach. We suggest that the chip selection process can be automated in the future using a combination of these techniques to enable high-throughput analyses.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Magnetic Properties of Ru-Doped Nd{sub 0.67}Sr{sub 0.33}Mn{sub 1−x}Ru{sub x}O{sub 3} (0 ≤ x ≤ 0.10) Manganites

The structural and magnetic properties of polycrystalline Nd{sub 0.67}Sr{sub 0.33}Mn{sub 1−x}Ru{sub x}O{sub 3} (x = 0.00 and 0.10) samples have been studied with the substitution of Ru at Mn site. The samples have orthorhombic crystal structure determined by room-temperature X-ray diffraction and Rietvield analysis. On Ru doping at Mn site, a change in its symmetry space group is observed. The increase in Ru content significantly affects the Curie temperature (T{sub c}). The double-exchange mechanism is suppressed with Ru doping affecting the Mn{sup 3+}–O{sup 2−}–Mn{sup 4+} ion network. Paramagnetic regime of samples in magnetization-temperature graph is fitted and analyzed with Curie-Weiss law. The magnetization versus applied magnetic field measurements show that the samples exhibit ferromagnetic behavior at lower temperatures and paramagnetic behavior at room temperature with negligible hysteresis loop and low coercive field.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Geometric Estimation of Multivariate Dependency

This paper proposes a geometric estimator of dependency between a pair of multivariate random variables. The proposed estimator of dependency is based on a randomly permuted geometric graph (the minimal spanning tree) over the two multivariate samples. This estimator converges to a quantity that we call the geometric mutual information (GMI), which is equivalent to the Henze–Penrose divergence. between the joint distribution of the multivariate samples and the product of the marginals. The GMI has many of the same properties as standard MI but can be estimated from empirical data without density estimation; making it scalable to large datasets. The proposed empirical estimator of GMI is simple to implement, involving the construction of an minimal spanning tree (MST) spanning over both the original data and a randomly permuted version of this data. We establish asymptotic convergence of the estimator and convergence rates of the bias and variance for smooth multivariate density functions belonging to a Hölder class. We demonstrate the advantages of our proposed geometric dependency estimator in a series of experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2010

Software Tool Integrating Data Flow Diagrams and Petri Nets

Data Flow Diagram - Petri Net (DFPN) is a software tool for analyzing other software to be developed. The full name of this program reflects its design, which combines the benefit of data-flow diagrams (which are typically favored by software analysts) with the power and precision of Petri-net models, without requiring specialized Petri-net training. (A Petri net is a particular type of directed graph, a description of which would exceed the scope of this article.) DFPN assists a software analyst in drawing and specifying a data-flow diagram, then translates the diagram into a Petri net, then enables graphical tracing of execution paths through the Petri net for verification, by the end user, of the properties of the software to be developed. In comparison with prior means of verifying the properties of software to be developed, DFPN makes verification by the end user more nearly certain, thereby making it easier to identify and correct misconceptions earlier in the development process, when correction is less expensive. After the verification by the end user, DFPN generates a printable system specification in the form of descriptions of processes and data.

Thronesbery, Carroll↗
DOE OSTI2025

Intern Poster: STIG Shouldn't Drop ACID

STIG (Structured Threat Intelligence Graph) is an open-source graph database tool from INL. It’s used to create and process cyber intelligence graphs, which are shared in the cyber threat intelligence community and used to train INL machine learning products like @DisCo. For quality machine learning and critical infrastructure defense, STIG’s database must be ACID: Atomic, Consistent, Isolated, Durable. Various ACID tests were designed and applied to STIG to ensure its behavior follows these properties.

99 - GENERAL AND MISCELLANEOUS↗
NASA NTRS1976

Ground state properties of solid and liquid spin-aligned atomic hydrogen

Calculations of the ground state energy in the solid phase were performed with the aid of a variational approach. The Morse potential form of the atomic triple potential computed by Kolos and Wolniewicz (1965) was employed for the calculations. The ground state energies of both the liquid and solid phases of spin-aligned atomic hydrogen around the volume of the transition are presented in a graph.

Danilowicz, R. L.↗
NASA NTRS1978

Thermal environment effects on strength and impact properties of boron-aluminum composites

A systematic study was conducted regarding the degradation of fracture strength and impact energy in commercial B-Al composites in both static and cyclic thermal environments. The composites used in the study contained approximately 50 vol % boron fibers, unidirectionally aligned in either a 6061 Al or 1100 Al matrix. The tensile strengths of the composites after 3000 thermal cycles as a function of upper cycle temperature are presented in graphs. The temperature at which the strengths of 6061 Al matrix, B-Al composites were significantly degraded after 3000 cycles was noticeably higher than that for the 1100 Al matrix composites. Static heating at 420 C resulted in no significant strength degradation for the 6061 Al matrix composites. In the case of 1100 matrix composites, some degradation was observed at 420 C but markedly less than in the composites cycled to 420 C.

Grimes, H. H.↗