Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Improvements to PHISICS/RELAP5-3D{sup C} Capabilities for Simulating HTGRs

Accurate, high-resolution full core simulations of prismatic high temperature reactors for burnup and transient analysis remain a challenge. The cores are geometrically large, but some features are quite small (tri-structural isotropic (TRISO) particles, burnable poison pellets). The treatment of both neutron scattering in graphite and resonance capture are complex and not adequately captured using the methods traditionally used in High Temperature Gas-cooled Reactors (HTGR) and commonly used in Light Water Reactors (LWR). For transient analysis, temperature feedback is a function of the TRISO fuel form, but full core models cannot resolve phenomena at this scale without averaging over space and energy. For burnup calculations, a second level of heterogeneity must be resolved to capture the local effects of fuel and burnable poisons, while accurately propagating their effects through and between blocks. The HTGR Methods and Simulation group has been utilizing the INL-developed PHISICS/RELAP5-3D{sup C} (P/R), code suite for participation in the Organization for Economic Cooperation and Development (OECD) Modular High Temperature Gas Cooled Reactor (MHTGR) Benchmark, funded by the US Department of Energy (DOE) under the Advanced Reactor Technologies (ART) program. The MHTGR-350 benchmark consists of several lattice, steady-state and transient exercises, and the P/R code has been successfully applied to most of the cases defined. In addition to this code-to-code verification activity, it is planned that P/R will be validated using data from several Loss of Forced Cooling (LOFC) tests performed at the High Temperature Test Reactor (HTTR) in a joint effort with Japan Atomic Energy Agency (JAEA) under the Civil Nuclear Energy Working Group (CNWG) project. These verification and validation simulations will identify code and model discrepancies, sensitivities, and establish the current state-of-the-art in HTGR simulation. The Department of Astronautical, Electrical and Energy Engineering (DIAEE), 'Sapienza' University has been involved in the development of P/R since 2014 through various graduate and PhD student projects. In the framework of this collaboration the P/R optimization for application on the OECD MHTGR-350 and HTTR models will be carried out.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Thermomechanical Modeling of High-Temperature Bonded Interface Materials

In an automotive power electronics package, bonded interface materials play a critical role in providing a smooth heat dissipation path from the device to the coolant. However, these materials are susceptible to failure when the package gets exposed to repeated changes in its thermal environment and internal temperature variations. Under these thermal conditions, the coefficient of thermal expansion mismatch between the different component layers results in thermally induced stresses and consequently the delamination of the material from its adjoining surfaces or crack initiation and propagation within the material. Thermomechanical modeling offers a path to study the complex nature of these bonded materials, guides their design and selection, and, in conjunction with experimental results, plays an important role in predicting their lifetime. In this chapter, two modeling strategies - similar in approach and implementation but different in the underlying theory - are discussed in the context of high-temperature bonded materials. In addition, a short review of sintered silver is provided, as it is widely seen as a potentially promising and reliable bonded material for high-temperature applications.

36 MATERIALS SCIENCE↗

Measuring Q And f(sub r) Of A Microwave Cavity: Part II

Frequency maintained at f(sub r), and Q determined from decay-rate measurement. Like "Measuring Q and f(sub r) of a Microwave Cavity: Part I" (NPO-19101), method used with microwave cavity in which sample of lossy dielectric material heated to specified high temperature by microwave power at resonant frequency. Methods contribute to accurate measurement of Q and f(sub r) for enhanced monitoring and control in contactless high-temperature processing of materials. Present method more effective in maintaining constant temperature. Also implemented more simply and at lower cost.

Iny, Ofer↗

High temperature polymer degradation: Rapid IR flow-through method for volatile quantification

Accelerated aging of polymers at elevated temperatures often involves the generation of volatiles. These can be formed as the products of oxidative degradation reactions or intrinsic pyrolytic decomposition as part of polymer scission reactions. A simple analytical method for the quantification of water, CO 2 , and CO as fundamental signatures of degradation kinetics is required. Here, we describe an analytical framework and develops a rapid mid-IR based gas analysis methodology to quantify volatiles that are contained in small ampoules after aging exposures. The approach requires identification of unique spectral signatures, systematic calibration with known concentrations of volatiles, and a rapid acquisition FTIR spectrometer for time resolved successive spectra. Furthermore, the volatiles are flushed out from the ampoule with dry N2 carrier gas and are then quantified through spectral and time integration. This method is sufficiently sensitive to determine absolute yields of ~50 μg water or CO 2 , which relates to probing mass losses of less than 0.01% for a 1 g sample, i.e. the early stages in the degradation process. Such quantitative gas analysis is not easily achieved with other approaches. Our approach opens up the possibility of quantitative monitoring of volatile evolution as an avenue to explore polymer degradation kinetics and its dependence on time and temperature.

36 MATERIALS SCIENCE↗

Instability of flux flow and production of vortex-antivortex pairs by current-driven Josephson vortices in layered superconductors

We report numerical simulations of the nonlinear dynamics of Josephson vortices driven by strong dc currents in layered superconductors. Dynamic equations for interlayer phase differences in a stack of coupled superconducting layers were solved to calculate a drag coefficient η(J) of the vortex as a function of the perpendicular dc current density J. It is shown that Cherenkov radiation produced by a moving vortex causes significant radiation drag increasing η(v) at high vortex velocities v and striking instabilities of driven Josephson vortices moving faster than a terminal velocity v c . The steady-state flux flow breaks down at v > v c as the vortex starts producing a cascade of expanding vortex-antivortex pairs evolving into either planar macrovortex structures or branching flux patterns propagating both along and across the layers. This vortex-antivortex pair production triggered by a rapidly moving vortex is most pronounced in a stack of underdamped planar junctions where it can occur at J > J s well below the interlayer Josephson critical current density. Both v c and J s were calculated as functions of the quasiparticle damping parameter, and the dc magnetic field was applied parallel to the layers. The effects of vortex interaction on the Cherenkov instability of moving vortex chains and lattices in annular stacks of Josephson junctions were considered. It is shown that a vortex driven by a current density J > J s in a multilayer of finite length excites self-sustained large-amplitude standing waves of magnetic flux, resulting in temporal oscillations of the total magnetic moment. We evaluated a contribution of this effect to the power W radiated by the sample and showed that W increases strongly as the number of layers increases. Furthermore, these mechanisms can result in nonlinearity of the c-axis electromagnetic response and contribute to THz radiation from the layered cuprates at high dc current densities flowing perpendicular to the ab planes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Methods and apparatuses for making cathodes for high-temperature, rechargeable batteries

The approaches for fabricating cathodes can be adapted to improve control over cathode composition and to better accommodate batteries of any shape and their assembly. For example, a first solid having an alkali metal halide, a second solid having a transition metal, and a third solid having an alkali metal aluminum halide are combined into a mixture. The mixture can be heated in a vacuum to a temperature that is greater than or equal to the melting point of the third solid. When the third solid is substantially molten liquid, the mixture is compressed into a desired cathode shape and then cooled to solidify the mixture in the desired cathode shape.

25 ENERGY STORAGE↗

High temperature thermochemical energy storage materials

Disclosed are thermal energy storage systems and methods that utilize metal carbonate eutectics that can undergo high temperature reversible reactions to form mixtures of metal oxides. The metal oxides undergo an exothermic reaction with carbon dioxide to form the molten metal carbonate eutectics, and the molten metal carbonate eutectics undergo an endothermic decarbonization reaction to form the metal oxides and carbon dioxide. By carrying out the reversible reactions at a temperature above the melting point of the carbonate eutectic, the systems provide high thermal conductivity and reversible stability for thermal energy storage.

25 ENERGY STORAGE↗

Thermal hydraulic issues of HTGR helical tube once through steam generator: methods and applications - 18478

High Temperature Gas-cooled Reactor (HTGR) usually uses helical tube once through steam generators (OTSG) for steam generation. The most concerned thermal hydraulic issues of HTGR helical tube OTSG are two phase flow instability and temperature non-uniformity. One dimensional transient code and two dimensional code are developed to investigate these two issues. The codes are briefly introduced, then the results are briefly presented and discussed. The main conclusions are that there does not appear two phase instability for all the working conditions for the steam generator of HTR-PM. Tube plugging can introduce temperature non-uniformity in the tube bundle. The temperature non-uniformity can be evened by changing the flow rate distribution through adjusting the throttle orifice at the inlet. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

High-resolution wall temperature measurements with distributed fiber optic sensors

Conventional approaches of surface temperature measurement are often unreliable, and other methods may not be practical in closed, high-temperature spaces. In this study, surface temperature measurements of the cooling panel of a natural circulation facility were performed with fiber optic distributed temperature sensors (DTS). High resolution surface temperature profiles of the cooling panel were acquired under two steady experimental conditions, and compared with measurements performed with nearby thermocouples. The total measurement error of the DTS results presented has been estimated to be ±4.4 °C. The findings reflected herein show that these DTS can reasonably measure surface temperature when installed with the methods developed in this study. Through the analysis of the DTS data collected, the interesting behavior of the cooling panel was revealed, providing new insights on the system's behavior that may be beneficial to the design and optimization of such heat transfer devices. These sensors can also provide the measurement density necessary for validation efforts with highly-resolved prediction methods such as finite element analysis (FEA) or computational fluid dynamics (CFD).

47 OTHER INSTRUMENTATION↗

Liquid cooling of aircraft engines

This report presents a method for solving the problem of liquid cooling at high temperatures, which is an intermediate method between water and air cooling, by experiments on a test-stand and on an airplane. A utilizable cooling medium was found in ethylene glycol, which has only one disadvantage, namely, that of combustibility. The danger, however is very slight. It has one decided advantage, that it simultaneously serves as protection against freezing.

Weidinger, Hanns↗

Evaluation of the Simplified Assessment Peak Equivalent Stress Design Limit Probability of Failure

The ASME Boiler and Pressure Vessel Code Section III Division 5 Subsection HH Subpart A (HHA) outlines requirements and qualification methods for graphite core components in high temperature reactor environments. One such structural qualification method is the Simplified Assessment outlined in HHA-3220, which represents a comparison of service level specific equivalent stresses to allowable stress values derived from target probability of failures (POFs). The target POF is based on the structural reliability class (SRC) for the components and service condition of interest, and is used to establish design limits for combined membrane and peak equivalent stresses. Combined membrane stress limits are derived from two parameter Weibull distribution fits of the graphite grade specific tensile strength data and the target POF. The combined membrane stress limits are then scaled based on the ratio of flexural strength to tensile strength (referred hereinafter as Rtf) to establish the corresponding peak equivalent stress limits. It is desired that the target POF is at least maintained for both combined membrane and peak equivalent design limits, especially with the use of Rtf. The assessment presented herein examines tensile and flexural data for medium and fine grade graphites relative to the calculated combined membrane and peak equivalent stress limits per HHA-3220 and illustrates the simplified assessment method results in anticipated, or at least conservative, peak equivalent design stress limits.

36 - MATERIALS SCIENCE↗

Initiating a Roadmap for Solar Fuels R&D: Imagining Beyond Thermochemical Cycles

Sandia National Laboratories in collaboration with the National Renewable Energy Laboratory outline a framework for developing a solar fuels roadmap based on novel concepts for hybridizing gas-splitting thermochemical cycle s with high-temperature electro chemical steps. We call this concept SoHyTEC, a Solar Hybrid Thermochemical-Electrochemical Cycle. The strategy focuses on transforming purely thermochemical cycles that split water (H 2 O) and carbon dioxide (CO 2 ) to produce hydrogen (H 2 ) and carbon monoxide (CO) , respectively, the fundamental chemical building blocks for diverse fuels and chemicals , by substituting thermochemical reactions with high-temperature electrochemical steps. By invoking high-temperature electrochemistry, the energy required to complete the gas-splitting cycle is divided into a thermal component (process temperature) and an electrical component (applied voltage). These components, sourced from solar energy, are independently variable knobs to maximize overall process efficiency. Furthermore, a small applied voltage can reduce cycle process temperature by hundreds of degrees , opening the door to cost-effective solar concentrators and practical receiver/reactor de signs. Using the SoHyTEC concept as a backdrop, we outline a framework that advocates developing methods for automating information gathering, critically evaluating thermochemical cycles for adapting into SoHyTEC, establishing requirements based on thermodynamic analysis, and developing a model-based approach to benchmarking a SoHyTEC system against a baseline concentrating solar thermal integrated electrolysis plant. We feel these framework elements are a necessary precursor to creating a robust and adaptive technology development roadmap for producing solar fuels using SoHyTEC. In one example, we introduce high-temperature electrochemistry as a method to manipulate a fully stoichiometric two-step metal oxide cycle that circumvents costly separation processes and ultra-high cycle temperatures. We also identify and group water-splitting chemistries that are conceptually amenable to hybridization.

14 SOLAR ENERGY↗

Phosphate Reactions as Mechanisms of High-Temperature Lubrication

One of the major problems preventing the operation of advanced gas turbine engines at higher temperatures is the inability of currently used liquid lubricants to survive at these higher temperatures under friction and wear conditions. Current state-of-the-art organic liquid lubricants rapidly degrade at temperatures above 300 C; hence some other form of lubrication is necessary. Vapor-phase lubrication is a promising new technology for high-temperature lubrication. This lubrication method employs a liquid phosphate ester that is vaporized and delivered to bearings or gears; the vapor reacts with the metal surfaces, generating a solid lubricious film that has proven very stable at high temperatures. In this study, solid lubricious films were grown on cast-iron foils in order to obtain reaction and diffusion rate data to help characterize the growth mechanism. A phenomenological mathematical model of the film deposition process was derived incorporating transport and kinetic parameters that were coupled to the experimental data. This phenomenological model can now be reliably used as a predictive and scale-up tool for future vapor-phase lubrication studies.

Nagarajan, Anitha↗

Nonthermal hydrogen plasma-enabled ambient, fast lignin hydrogenolysis to valuable chemicals and bio-oils

The reduction of fossil fuel resources and the ongoing surge in global energy demand have captured the interest of researchers worldwide, prompting a focus on developing renewable energy sources. For this reason, biomass conversion has emerged as a crucial pathway for renewable fuel production. Lignin, constituting 10–35% of woody biomass, represents a significant and largely untapped sustainable feedstock. Despite the potential of lignin, a substantial portion of this lignocellulosic residue remains unused, with approximately 60% considered waste. This study addresses the challenge of underutilized lignin by introducing an innovative approach to its hydrogenolysis. Despite their potential, existing hydrogenolysis methods face obstacles such as complexity, high cost, and the need for high temperatures or pressures. Herein we report a noncatalytic nonthermal hydrogen plasma method for lignin hydrogenolysis, conducted under ambient temperature and pressure conditions. Our method proves to be highly effective in breaking lignin bonds, achieving complete conversion, and generating valuable gaseous and bio-oil products including methane and aromatic dimers and monomers obtained from guaiacyl and syringyl units within the lignin structure. Our results showed an increase in gaseous products, especially methane, and aromatic monomer yields, as well as a reduction in total bio-oil and biochar yields and lignin functional groups by increasing reaction time, input power, and H2 partial pressure. This research confirms the considerable promise of utilizing noncatalytic nonthermal hydrogen plasma-assisted hydrogenolysis as an effective technique for producing gaseous and liquid fuels from lignin.

Pishva, Parsa↗

Electrical Properties of Barium and Zirconium Modified NBT Ferroelectric Ceramics

Recently a new wave of interest has risen on relaxor ferroelectrics with complex perovskite structure due to their wide use in fabrication of multilayer ceramic capacitors, electrostrictive actuators, and electromechanical transducers. The polycrystalline 0.93(Bi{sub 0.5}Na{sub 0.5})Ba{sub 0.07}Z{sub 0.04}T{sub 0.96}O{sub 3}(0.07BNBZT) ceramic material, which is in the vicinity of the morphotropic phase boundary (MPB) has been prepared by using high temperature solid state reaction method. The tolerance factor has been estimated and found to be 0.815. XRD analysis revealed a rhombohedral perovskite type structure. SEM micrographs showed highly dense grains with rectangular shape. The average grain size is found to be 1.51{mu}m. Dielectric studies in the material ha indicated relaxor behaviour with diffuse phase transition. High value of {epsilon}{sub m}>1958 is found at 1kHz, Tm (phase transition temperature) 335 deg. C, The diffuseness parameter was established to be 1.60 revealing the relaxor behaviour. Further, to confirm the relaxor behaviour in the material, Vogel-Fulcher (V-F) relation has been used. Estimated V-F parameters are found to be T{sub f} = 138 deg. C, E{sub a} = 0.080 eV and {nu}{sub o} = 2.32x10{sup 8} Hz. Cole-Cole analysis has shown a non-Debye type relaxation in the system. Conductivity studies in the material obeyed the Jonscher's power law in frequency range of (45Hz-5MHz) and temperature range of (35 deg. C - 600 deg. C). The electric conduction in the system may be due to hopping/mobility/ transportation of charge carriers.

36 MATERIALS SCIENCE↗

Synthesis, microstructure and magnetic properties of Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} core–shell particles and Fe{sub 3}Si/Al{sub 2}O{sub 3} soft magnetic composite core

Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} core–shell particles and Fe{sub 3}Si/Al{sub 2}O{sub 3} soft magnetic composite core have been synthesized via a modified stöber method combined with following high temperature sintering process. Most of conductive Fe{sub 3}Si{sub 0.7}Al{sub 0.3} particles could be uniformly coated by insulating SiO{sub 2} using the modified stöber method. The Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} core–shell particles exhibited good soft magnetic properties with low coercivity and high saturation magnetization. The reaction 4Al+3SiO{sub 2}=2α-Al{sub 2}O{sub 3}+3Si took place during the sintering process. As a result the new Fe{sub 3}Si/Al{sub 2}O{sub 3} composite was formed. The Fe{sub 3}Si/Al{sub 2}O{sub 3} composite core displayed more excellent soft magnetic properties, better frequency stability at high frequencies, much higher electrical resistivity and lower core loss than the pure Fe{sub 3}Si{sub 0.7}Al{sub 0.3} core. The method of introducing insulating layers surrounding magnetic particles provides a promising route to develop new and high compact soft magnetic materials with good magnetic and electric properties. - Graphical abstract: In Fe{sub 3}Si/Al{sub 2}O{sub 3} composite, Fe{sub 3}Si phases are separated by Al{sub 2}O{sub 3} layers and the eddy currents are confined in Fe{sub 3}Si phases, thus increasing resistivity and reducing core loss. - Highlights: • Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} core–shell particles and Fe{sub 3}Si/Al{sub 2}O{sub 3} cores were prepared. • Fe{sub 3}Si{sub 0.7}Al{sub 0.3} particles could be uniformly coated by nano-sized SiO{sub 2} clusters. • Fe{sub 3}Si{sub 0.7}Al{sub 0.3}@SiO{sub 2} particles and Fe{sub 3}Si/Al{sub 2}O{sub 3} cores showed good soft magnetic properties. • Fe{sub 3}Si/Al{sub 2}O{sub 3} had lower core loss and better frequency stability than Fe{sub 3}Si{sub 0.7}Al{sub 0.3} cores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced temperature sensing based on sub-threshold nonlinear spectra of one-dimensional photonic crystal with a Kerr defect layer

A new method to achieve highly sensitive temperature sensing is proposed based on the nonlinear spectral properties of a one-dimensional photonic crystal (1DPC) composed of temperature-sensitive materials with a Kerr defect layer. The sensitivity can be two orders of magnitude higher than that of the corresponding linear 1DPC structure. The sensitivity and measuring range can be precisely tuned. These properties favor the fabrication of a versatile temperature sensor with switchable fine and coarse tuning functions. This principle of nonlinear temperature sensing can also be extended to other kinds of spectrum-based sensors to obtain higher performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗