Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interface Problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

System Modeling and Robust Stability Region Analysis for Multi-inverters Based on VSG

As the number of inverter-interfaced distributed generators (IIDGs) increases, the decrease in the inertia of the microgrid affects the stability of microgrid voltage and current. The virtual synchronous generator (VSG) control method simulates the output characteristics of the synchronous machine to improve the inertia and damping of the microgrid. However, low-frequency oscillations can occur in systems with multi-VSGs connected in parallel, primarily when operating in island mode. Therefore, this article develops the small-signal state-space model for multi-inverters based on VSG and analyses the robust stability region (RSR) of the control parameters. Firstly, an extensible small-signal state-space model is established and simplified in the dq axis, which is a necessary preprocessing for the subsequent stability analysis. Secondly, the guardian map method based on bialternate product operation is constructed, and the RSR is established through translation mapping and rotation mapping. Therefore, the solution of RSR is transformed into the problem of identifying the Hurwitz matrix. Finally, the simulations and experiments verify that the calculated region can ensure stable operation during startup and meet the requirement to suppress low-frequency oscillations. In conclusion, the method of solving RSR proposed in this paper provides a basis for selecting controller parameters in practical engineering.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Investigating the Role of Copper in Arsenic Doped Cd(Se,Te) Photovoltaics

The open circuit voltage (VOC) deficit in Cd(Se,Te)-based photovoltaics remains a critical obstacle for pushing the technology closer to theoretical performance limits. Arsenic doping has become a dominant and promising route to achieve the higher p-type carrier concentrations necessary for higher VOC, but challenges associated with this alternate defect chemistry and higher doping density have hindered progress. Here we show that while arsenic doping enables high carrier concentrations (>1016 cm-3), co-doping with copper can provide a boost to VOC without a significant change to carrier concentration. A large data set is initially used to explore current-voltage and capacitance-voltage trends associated with arsenic doped devices with and without copper. A smaller subset is then used to probe these trends using a wide variety of characterization techniques. Copper is found to facilitate reduced interface recombination and potentially improved bulk absorber characteristics, though the mechanisms for these improvements are not yet clear. Despite the improved performance of co-doped devices, VOC is still far below its potential especially for highly doped devices. Low emitter doping in conjunction with high absorber doping seems to be a plausible cause for this significant deficit, though other device properties may exacerbate this problem.

CdSeTe↗
DOE OSTI2020

Addressing Soiling: From Interface Chemistry to Practicality

Natural soiling has reduced the energy output of photovoltaic (PV) systems since the technology was first used. Projecting even a small average annual soiling loss translates to billions of dollars in annual lost revenue worldwide. Production losses due to soiling can be very high in some locations, substantially increasing the levelized cost of electricity (LCOE) due to lost power production, increased operating and maintenance costs, and/or increased finance cost due to the uncertainty. Furthermore, although soiling has been discussed in the literature for more than 70 years, solutions to many problems are still needed. The National Renewable Energy Laboratory (NREL) is working with the PV industry to develop the tools/knowledge so that the effects of soiling can be predicted for different environmental conditions and cost-effective mitigation can be implemented. For this project, NREL performed a number of research and development tasks/subtasks in the following general areas to 1) predict PV module soiling losses based on environmental factors at a PV installation and from its energy production data, 2) quantitatively measure the adhesion forces to understand the physics enabling soiling, and 3) develop related standards on PV module coatings and artificial soiling. At the inception of the project, the PV industry considered these efforts to be the most important and immediate soiling issues that we could address to have the highest impact on LCOE. These focused efforts have led to outstanding accomplishments that have been communicated and very well received by the community.

14 SOLAR ENERGY↗
DOE OSTI2022

Non-Equilibrium Doping of Poly-Si:Ga/SiOx Passivating Contacts Solar Cells

In this contribution, we show that Ga-hyperdoped poly-Si/SiOx contacts are realized by pulsed laser annealing and post-hydrogenation. The motivation behind this work is to improve the inferior performance of boron-doped poly- Si/SiOx contacts when compared to the phosphorus-doped contacts. Here we used Ga as a novel p-type dopant to replace B, as B is known to accumulate at the interface between the oxide and the crystalline silicon and cause recombination. Due to a high diffusivity of Ga in oxide and a much higher segregation coefficient (Si:SiOx), Ga is shown to be immune to the oxide pileup phenomenon. However, Ga has a low solid solubility limit in Si (5x10^19 cm-3), which is not enough to form a low resistivity contact. To overcome this problem, we explored pulsed laser annealing via excimer laser by varying the laser energy densities and pulses. The passivation and electrical properties are studied systematically using photoluminescence (PL), secondary ion mass spectrometry (SIMS), and Van der Pauw-Hall measurements. We show an active Ga doping concentration above 1x10^20 cm^-3, which is above the solid solubility limit of Ga in Si. Good passivation quality is demonstrated with the highest implied Voc (iVoc) of 721 mV on single side polished samples. Furthermore, a low diode contact resistivity of ~22 m..omega.. cm^2 is obtained using Ti/Ag contacts, with minimal metal-to-semiconductor contact resistivity of 0.9 m..omega.. cm^2.

non-equilibrium doping↗
DOE OSTI2021

FIERRO V.X

FIERRO is a modern C++ code intended to simulate quasi-static solid mechanics problems and transient, compressible material dynamic problems with Lagrangian methods, which have meshes with constant mass elements that move with the material. FIERRO is designed to aid a) material model research that has historically been done using commercial implicit and explicit finite element codes, b) numerical methods research, and c) computer science research. FIERRO supports user developed material models that adhere to several industry standard formats by using a C++ to Fortran interface to couple the model to the numerical solvers. FIERRO is built on the ELEMENTS library that supports a diverse suite of element types, including high-order elements, and quadrature rules. The mesh class within the ELEMENTS library is designed for efficient calculations on unstructured meshes and to minimize memory usage. FIERRO is designed to readily accommodate a range of numerical methods including continuous finite element, finite volume, and discontinuous Galerkin methods. FIERRO is designed to support explicit and implicit time integration methods. FIERRO only supports a single material in an element. No physical data exists within the code.

Morgan, Nathaniel↗
DOE OSTI2024

Performance Results on CPU/GPU Exascale Architectures for OMEGA: The Ocean Model for E3SM Global Applications

The US Department of Energy (DOE) conducts climate simulations on some of the world’s largest supercomputers. These exascale machines use heterogeneous architectures with both CPUs and GPUs, and scientific codes must adapt to make full use of this computing power. Los Alamos National Lab is developing Omega: The Ocean Model for E3SM Global Applications, which is specifically designed for modern exascale computers. It uses external libraries that have been optimized for a variety of architectures to run on different supercomputers. Omega is an unstructured-mesh ocean model based on TRiSK numerical methods. It will be the new ocean component of the DOE’s Energy Exascale Earth System Model (E3SM). The algorithms in Omega follow those of the current ocean component, MPAS-Ocean, but it will be written in C++ rather than Fortran to take advantage of the Kokkos performance portability library. Omega spatial operators are written as Kokkos kernels to run efficiently on both CPUs and GPUs. Work on Omega began in 2023 with a new C++ framework for unstructured mesh partitioning, halo exchanges, parallel IO, and Kokkos interfaces. The current version, Omega-0, is being developed to solve the shallow water equations and at present includes all of the tendency terms but not time stepping. Here we share the results of Omega-0 verification and performance testing. Verification includes unit tests implemented with CTest as well as convergence tests in Polaris, an in-house python package with a large suite of test problems. Performance tests compare simulations conducted on CPUs versus GPUs and across different architectures: tests are run on Frontier, which has AMD “Optimized 3rd Gen EPYC” CPUs and AMD MI250X GPUs, as well as Perlmutter, which is composed of AMD EPYC 7763 CPUs and NVIDIA A100 GPUs.

58 GEOSCIENCES↗
DOE OSTI2025

Active Learning Meets Foundation Models: Fast Remote Sensing Data Annotation for Object Detection

Object detection in remote sensing demands extensive, high-quality annotations—a process that is both labor-intensive and time-consuming. In this work, we introduce a real-time active learning and semi-automated labeling framework that leverages foundation models to streamline dataset annotation for object detection in remote sensing imagery. For example, by integrating a Segment Anything Model (SAM), our approach generates mask-based bounding boxes that serve as the basis for dual sampling: (a) uncertainty estimation to pinpoint challenging samples, and (b) diversity assessment to ensure broad data coverage. Furthermore, our Dynamic Box Switching Module (DBS) addresses the well-known cold start problem for object detection models by replacing its suboptimal initial predictions with SAM-derived masks, thereby enhancing early-stage localization accuracy. Extensive evaluations on multiple remote sensing datasets plus a real-world user study, demonstrate that our framework not only reduces annotation effort, but also significantly boosts detection performance compared to traditional active learning sampling methods. The code for training and the user interface will be made available.

Burges, Marvin [ORNL] (ORCID:0000000312690769)↗
DOE OSTI2021

Utilizing the unique charge extraction properties of antimony tin oxide nanoparticles for efficient and stable organic photovoltaics

Simultaneously enhancing device performance and longevity, as well as balancing the requirements on cost, scalability, and simplification of processing, is the goal of interface engineering of organic solar cells (OSCs). In our work, we strategically introduce antimony (Sb 3+ ) cations into an efficient and generic n-type SnO 2 nanoparticles (NPs) host during the scalable flame spray pyrolysis synthesis. Accordingly, a significant switch of conduction property from an n-type character to a p-type character is observed, with a corresponding shift in the work function (WF) from 4.01 ± 0.02 eV for pristine SnO 2 NPs to 5.28 ± 0.02 eV for SnO 2 NPs with 20 mol. % Sb content (ATO). Both pristine SnO 2 and ATO NPs with fine-tuned optoelectronic properties exhibit remarkable charge carrier extraction properties, excellent UV resistance and photo-stability being compatible with various state-of-the-art OSCs systems. The reliable and scalable pristine SnO 2 and ATO NPs processed by doctor-blading in air demand no complex post-treatment. Our work offers a simple but unique approach to accelerate the development of advanced interfacial materials, which could circumvent the major existing interfacial problems in solution-processed OSCs.

14 SOLAR ENERGY↗
DOE OSTI2025

The Artificial Scientist: in-Transit Machine Learning of Plasma Simulations

Large-scale simulations or scientific experiments produce petabytes of data per run. This poses massive challenges for I/O and storage when scientific analysis workflows are run manually offline. Unsupervised deep learning-based techniques to extract patterns and non-linear relations from these large amounts of data provide a way to build scientific understanding from raw data, reducing the need for manual pre-selection of analysis steps, but require exascale compute and memory to process the full dataset available. In this paper, we demonstrate a heterogeneous streaming workflow in which plasma simulation data is streamed directly to a Machine Learning (ML) application training a model on the simulation data in-transit, completely circumventing the capacity-constrained filesystem bottleneck. This workflow employs openPMD to provide a high level interface to describe scientific data and also uses ADIOS2, to transfer volumes of data that exceed the capabilities of the filesystem. We employ experience replay to avoid catastrophic forgetting in learning from this non-steady state process in a continual manner and adapt it to improve model convergence while learning in-transit. As a proof-of-concept, we approach the ill-posed inverse problem of predicting particle dynamics from radiation in a particle-incell (PIConGPU) simulation of the Kelvin-Helmholtz instability (KHI). We detail hardware-software co-design challenges as we scale PIConGPU to full Frontier, the Top-1 system as of June 2024 Top500 list.

Kelling, Jeffrey [Helmholtz-Zentrum Dresden Rossen↗
DOE OSTI2020

Investigation of finite-volume methods to capture shocks and turbulence spectra in compressible flows

The aim of the present paper is to provide a comparison between several finite-volume methods of different numerical accuracy: the second-order Godunov method with PPM interpolation and the high-order finite-volume WENO method. In this work, the results show that while on a smooth problem the high-order method performs better than the second-order one, when the solution contains a shock all the methods collapse to first-order accuracy. In the context of the decay of compressible homogeneous isotropic turbulence with shocklets, the actual overall order of accuracy of the methods reduces to second-order, despite the use of fifth-order reconstruction schemes at cell interfaces. Most important, results in terms of turbulent spectra are similar regardless of the numerical methods employed, except that the PPM method fails to provide an accurate representation in the high-frequency range of the spectra. It is found that this specific issue comes from the slope-limiting procedure and a novel hybrid PPM/WENO method is developed that has the ability to capture the turbulent spectra with the accuracy of a high-order method, but at the cost of the second-order Godunov method. Overall, it is shown that virtually the same physical solution can be obtained much faster by refining a simulation with the second-order method and carefully chosen numerical procedures, rather than running a coarse high-order simulation. Our results demonstrate the importance of evaluating the accuracy of a numerical method in terms of its actual spectral dissipation and dispersion properties on mixed smooth/shock cases, rather than by the theoretical formal order of convergence rate.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Confining Liquids inside Carbon Nanotubes: Accelerated Molecular Dynamics with Spliced, Soft-Core Potentials and Simulated Annealing

Understanding emergent phenomena of fluids under physical confinement requires the development of advanced tools for rapid and accurate simulation of their physiochemical properties. Simulating liquid molecules commensurate in size with the nanoscale enclosures that confine them is a key challenge. In this work, we demonstrate an accelerated molecular dynamics simulation technique that combines soft-core potentials (SCP) and simulated annealing (SA) to analyze confined liquids. This integrated SCP/SA method relies on a new spliced soft-core potential (SSCP), which enables tunable accuracy with respect to the target hard-core potential (HCP). SCP/SA enables the packing of enclosures with bulk material in a controlled, thermodynamically consistent manner. The enhanced SSCP accuracy is a critical feature of SCP/SA, enabling a smooth transition between the SCP and the HCP at a desired SCP hardness. We applied SCP/SA to the problem of filling a carbon nanotube (CNT) in periodic boundary conditions with a popular ionic liquid (IL), 1- butyl-3-methylimidazolium hexafluorophosphate $[\text{BMIM}^+][\text{PF}^–_6]$. We performed a series of triplicate simulations on systems with varying CNT diameter and charge to demonstrate SCP/SA’s versatility. Beyond this IL/CNT system, the SCP/SA simulation framework has a broad range of potential applications, not limited to nanoscale enclosures and interfaces, including both solid-state and biological systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Investigating Application of LiDAR for Nuclear Power Plants

Many evaluation, assessment, and modeling tasks at nuclear power plants require spatial in-formation; this often requires physical visits to locations within the facility because the 2D or 3D schematics and current models do not contain enough detail or do not capture as-built and real-world conditions. These visits require extensive manual labor for not only the requesting party, but also support groups, such as security. Light Detection and Ranging (LiDAR) mapping is trying to solve that problem by providing very detailed 3D models for low costs. However, the use of these models can be very limited because either component reference information is missing and too costly to add or there is no way to extract specific spatial data needed for other tools. This report outlines two main efforts. First, to reduce the effort of “Tagging” data in large 3D models, a general Application Programming Interface (API) was developed to import a variety of existing plant database information into a 3D-visualization engine. Filters allow the user to have only zone-specific items listed; then, they can simply click and assign the information to a specific spot or component in the 3D model. The second part of the work is the development of an interface for importing pieces from the3D-LiDAR model into other systems needed for modeling and simulation, outlined around fire modeling. This interface allows for the retrieval of item location and boundaries, enabling the auto generation of models for varying tools.

3D Modelling↗
DOE OSTI2025

jaxhps: An elliptic PDE solver built with machine learning in mind

Elliptic partial differential equations (PDEs) can model many physical phenomena, such as electrostatics, acoustics, wave propagation, and diffusion. In scientific machine learning settings, a high-throughput PDE solver may be required to generate a training dataset, run in the inner loop of an iterative algorithm, or interface directly with a deep neural network. To provide value to machine learning users, such a PDE solver must be compatible with standard automatic differentiation frameworks, scale efficiently when run on graphics processing units (GPUs), and maintain high accuracy for a large range of input parameters. We have designed the jaxhps package with these use-cases in mind by implementing a highly efficient and accurate solver for elliptic problems with native hardware acceleration and automatic differentiation support.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Low-cost, Highly Efficient and Fast Thermally Pressed Scalable Carbon-based Planar Perovskite Solar Cells

This Final Technical Report summarizes work completed under Award Number DEEE0009833, titled "Low-cost, Highly Efficient and Fast Thermally Pressed Scalable Carbon-based Planar Perovskite Solar Cells." The project addressed the central technical problem that carbon-electrode perovskite solar cells (C-PSCs) can reduce electrode costs and improve environmental durability, but they have historically lagged noble-metalcontact devices due to poor carbon/perovskite contact, high carbon-electrode resistance, imperfect hole extraction, and insufficient operational stability. The Statement of Project Objectives (SOPO), therefore, required systematic engineering of thermally pressed carbon-based planar perovskite solar cells by improving the carbon/perovskite interface quality, improving carbon-electrode conductivity, and further increasing device stability. The work advanced understanding of carbon-based perovskite photovoltaics by connecting device performance to three coupled mechanisms: interfacial recombination at the perovskite/hole-transport-layer/carbon stack; lateral and vertical transport losses in carbon contacts; and instability driven by moisture, heat, illumination, ion migration, and slow/variable manufacturing steps.

14 SOLAR ENERGY↗
DOE OSTI2022

Wetting Properties of Molten Salts

Wettability is a key piece of information in understanding the behavior of molten salts at material interfaces. Wettability is most easily characterized by contact angle which is measurable using the sessile drop method. A modified sessile drop method was used to measure the contact angle of the LiCl-KCl eutectic at varying temperatures on Nickel 200, Hastelloy C276, Glassy Carbon, and MACOR machinable ceramic. The contact angle was used with existing surface temperature data to find the work of adhesion at various temperatures. Finally, problems encountered during the experiment are listed and possible improvements are provided.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Realization of a high luminosity muon beam at the Jefferson Lab

The proton is the major component of the visible matter of our universe, so being able to determine its fundamental properties, such as its charge radius, is of vital importance. In recent years, several experiments have been performed for the accurate measurement of the proton radius with different experimental techniques. The main and most common are based on two different techniques: ep scattering and Lamb shift spectroscopy of regular hydrogen atoms. The latter can also be performed on muonic hydrogen atoms with a significant improvement in accuracy. Recent measurements that use this method have highlighted a discrepancy between the results obtained with the diffusion of electrons and those obtained with the spectroscopic technique leading to the so-called ?proton radius puzzle?. The explanation of why this difference between the measured values exists is still a matter of discussion. The last attempt to address the puzzle was the PRad Experiment. It was performed with a unique experimental setup that gave the scientists an excellent control on the systematic errors that are usually present in electron-proton scattering experiments. This has significantly increased the precision of the measurement, bringing it in the same area as the spectroscopic ones done on muonic hydrogen atoms, which are considered the most precise. However, to solve the puzzle once and for all, even more precise electron scattering measurements are needed. Alternatively, new methods can be used, such as eg. muon-proton scattering at low transferred momenta in order to lower the systematic errors that comes with the measurement. This thesis tries to address this problem by studying the set up of an intense muon beam at the Jefferson Laboratory (JLab) that can be used to carry out a high-precision m ? p scattering experiment. Using Montecarlo simulations I studied the muon production resulting from the interaction of the primary electron beam with the beam-dump at JLab Hall-A. The simulations were performed using the FLUKA package via the FLAIR graphical interface. In this study, I modified an existing geometry (built for the ?Beam Dump eXperiment?) and performed several studies in order to optimize the muon beam parameters. In order to estimate the beam intensity, I studied the muon generation and transportation through the concrete bunker surrounding the Hall-A beam-dump. Detailed studies on muon attenuation and dispersion at different depth allowed me to track the beam profile in space and momentum as a function of the distance from the beam-dump. Last, but not least, I studied a possible tagging system for the muon beam. The tagging system will allow us to know with good precision (O(1=1000)) the energy of each muon of the beam. Based on the results obtained, I created an event generator that incorporates the detailed description of the muon beam (energy, position, emittance) useful to define and optimize the experimental setup for a future measurement of the proton radius at the JLab.

Fulci, Antonino↗
DOE OSTI2020

Hydro-mechanical coupled modeling of hydraulic fracturing using the mesh fragmentation technique

The inclusion of special interface elements between standard finite elements is becoming a common technique to model discontinuities in porous media using the finite element method (FEM). Recently, it was proved that high aspect ratio (HAR) elements can reproduce very satisfactorily the main features of behavior observed in a single hydraulically-induced fracture. In this paper, the mesh fragmentation technique (MFT) is proposed to extend the application of HAR elements to simulate more general problems involving the formation of hydraulic fractures in rocks by introducing this type of element in-between the standard FE of a typical mesh. The proposed framework makes use of standard FE techniques. Therefore, it is relatively easy to upgrade an existing FE program for continuous porous media to deal with evolving discontinuities. The proposed approach is verified and validated against available analytical and numerical solutions. The crack patterns predicted by the MFT are also compared with the ones observed in the laboratory. The formation of multiple fractures is also analyzed. In all cases, the proposed technique was able to properly capture the main features of rock behavior subjected to hydraulic fracturing.

58 GEOSCIENCES↗
DOE OSTI2021

Simulating low-energy neutrino interactions with MARLEY

Monte Carlo event generators are a critical tool for the interpretation of data obtained by neutrino experiments. Several modern event generators are available which are well-suited to the GeV energy scale used in studies of accelerator neutrinos. However, theoretical modeling differences make their immediate application to lower energies difficult. In this paper, I present a new event generator, MARLEY, which is designed to better address the simulation needs of the low-energy (tens of MeV and below) neutrino community. The code is written in C++14 with an optional interface to the popular ROOT data analysis framework. The current release of MARLEY (version 1.2.0) emphasizes simulations of the reaction 40 Ar ( ν e , e − ) 40 K ⁎ but is extensible to other channels with suitable user input. This paper provides detailed documentation of MARLEY's implementation and usage, including guidance on how generated events may be analyzed and how MARLEY may be interfaced with external codes such as Geant4. Further information about MARLEY is available on the official website at http://www.marleygen.org. Program title:MARLEY 1.2.0 CPC Library link to program files:https://doi.org/10.17632/4v7zxnc8j3.1 Developer's respository link:http://github.com/MARLEY-MC/marley Code Ocean capsule:https://codeocean.com/capsule/9868179 Licensing provisions: GNU General Public License 3.0 Programming language: C++14 External routines/libraries used: GNU Scientific Library [1,2] (required), ROOT [3,4] (optional) Nature of problem: Simulation of neutrino-nucleus scattering events at energies of tens-of-MeV and below Solution method: Initial two-to-two scattering kinematics are sampled using the allowed approximation differential cross section and tables of precomputed nuclear matrix elements. Subsequent de-excitations of the remnant nucleus are simulated using a Monte Carlo implementation of the Hauser-Feshbach statistical model and tabulated γ-ray decay schemes for discrete nuclear levels. Additional comments including restrictions and unusual features: Input data are provided with the code that are suitable for producing simulations of the charged-current reaction 40 Ar ( ν e , e − ) 40 K ⁎ , coherent elastic neutrino-nucleus scattering on spin-zero target nuclei, and neutrino-electron elastic scattering on any atomic target. Preparation of new reaction input files (whose format is documented in Appendix B) would enable other reaction channels and nuclear targets to be handled by the existing code framework. Although there is no maximum neutrino energy enforced by the code itself, realistic neutrino-nucleus scattering events may be generated up to roughly 50 MeV. Above this energy, the effects of forbidden nuclear transitions, which are neglected in the current treatment of the cross sections (see section 2.1), become increasingly important.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗