Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interface state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Carrier collection losses in interface passivated amorphous silicon thin-film solar cells

In silicon thin-film solar cells the interface between the i- and p-layer is the most critical. In the case of back diffusion of photogenerated minority carriers to the i/p-interface, recombination occurs mainly on the defect states at the interface. To suppress this effect and to reduce recombination losses, hydrogen plasma treatment (HPT) is usually applied. As an alternative to using state of the art HPT we apply an argon plasma treatment (APT) before the p-layer deposition in n-i-p solar cells. To study the effect of APT, several investigations were applied to compare the results with HPT and no plasma treatment at the interface. Carrier collection losses in resulting solar cells were examined with spectral response measurements with and without bias voltage. To investigate single layers, surface photovoltage and X-ray photoelectron spectroscopy (XPS) measurements were conducted. The results with APT at the i/p-interface show a beneficial contribution to the carrier collection compared with HPT and no plasma treatment. Therefore, it can be concluded that APT reduces the recombination centers at the interface. Further, we demonstrate that carrier collection losses of thin-film solar cells are significantly lower with APT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low Impedance Cathode/Electrolyte Interfaces for High Energy Density Solid-State Batteries

All-solid-state batteries (ASSBs) using a ceramic fast Li-ion conductor as a solid-state electrolyte (SSE) have been proposed as a promising strategy to significantly increase the energy density of lithium batteries. Due to their high ion conductivity and excellent stability, Li-stuffed garnets exhibit the most promising physical and chemical properties for SSEs. However, the typical microstructure, thick (>100 μm) bulk electrolyte and simple planar electrode/electrolyte interfaces, combined with poor electrode wetting of the garnet result in excessively high area specific resistances (ASRs) that severely limit achievable current density and cell energy density. In this project, the team is building on their demonstrated expertise with garnet electrolytes and ASSBs to accomplish the following: (1) engineer interfaces to overcome high NMC/LLZ interfacial impedance and interfacial degradation; (2) develop processing and fabrication techniques to achieve high loading NMC/LLZ composite cathodes with low resistance and high cyclability; and (3) integrate the NMC/LLZ cathodes into all-solid-state Li-metal/LLZ cells to achieve high-energy-density batteries.

25 ENERGY STORAGE↗

Achieving stable all-solid-state lithium-metal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode

All-solid-state batteries with sulfide electrolytes and high-nickel layered oxide cathodes attract much interest due to their high specific energy. However, their cycling performance is primarily influenced by the interface between the sulfide electrolyte and the high-Ni layered oxide particles, which requires the use of composite cathodes with high ionic and electronic conductivities to achieve a kinetically stable interface inside the cathode. Here, we apply Ti 2 O 3 particles to the high-Ni cathode LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811), where Ti 2 O 3 not only acts as an electronic conductor to provide a fast diffusion path for electrons in the composite cathode, but also absorbs the lattice oxygen released from NCM811 cathode during cycling, stabilizing the Li 6 PS 5 Cl/NCM811 interface and suppressing electrolyte oxidation. The as-modified cathode exhibits an initial specific capacity of 192 mAh g -1 and retains 166 mAh g -1 after 140 cycles at 0.1C rate with a good capacity retention of 86.5%. Furthermore, the composite cathode displays high rate capability even at 1C rate. By contrast, the unmodified Li 6 PS 5 Cl/NCM811 cathode shows poor cycling performance with only 130 mAh g -1 remaining after 130 cycles. This work provides a new direction for the design of cathodes for all-solid-state batteries that can deliver high specific energy with long cycle life.

25 ENERGY STORAGE↗

Hybridization-Induced Carrier Localization at the C60/ZnO Interface

Electronic coupling and ground-state charge transfer at the C60/ZnO hybrid interface is shown to localize carriers in the C60 phase. This effect, revealed by resonant X-ray photoemission, arises from interfacial hybridization between C60 and ZnO. Such localization at carrier-selective electrodes and interlayers may lead to severely reduced carrier harvesting efficiencies and increased recombination rates in organic electronic devices.

14 SOLAR ENERGY↗

The structural basis of tail-anchored membrane protein recognition by Get3

Targeting of newly synthesized membrane proteins to the endoplasmic reticulum is an essential cellular process. Most membrane proteins are recognized and targeted co-translationally by the signal recognition particle. However, nearly 5% of membrane proteins are 'tail-anchored' by a single carboxy-terminal transmembrane domain that cannot access the co-translational pathway. Instead, tail-anchored proteins are targeted post-translationally by a conserved ATPase termed Get3. The mechanistic basis for tail-anchored protein recognition or targeting by Get3 is not known. Here we present crystal structures of yeast Get3 in 'open' (nucleotide-free) and 'closed' (ADP {center_dot} AlF{sub 4}{sup -}-bound) dimer states. In the closed state, the dimer interface of Get3 contains an enormous hydrophobic groove implicated by mutational analyses in tail-anchored protein binding. In the open state, Get3 undergoes a striking rearrangement that disrupts the groove and shields its hydrophobic surfaces. These data provide a molecular mechanism for nucleotide-regulated binding and release of tail-anchored proteins during their membrane targeting by Get3.

36 MATERIALS SCIENCE↗

Metal-insulator transition and its relation to magnetic structure in (LaMnO{sub 3}){sub 2n}/(SrMnO{sub 3}){sub n} superlattices.

Superlattices of (LaMnO{sub 3}){sub 2n}/(SrMnO{sub 3}){sub n} (1 {le} n {le} 5), composed of the gapped insulators LaMnO{sub 3} and SrMnO{sub 3}, undergo a metal-insulator transition as a function of n, being metallic for n {le} 2 and insulating for n {ge} 3. Measurements of transport, magnetization, and polarized neutron reflectivity reveal that the ferromagnetism is relatively uniform in the metallic state, and is strongly modulated in the insulating state, being high in LaMnO{sub 3} and suppressed in SrMnO{sub 3}. The modulation is consistent with a Mott transition driven by the proximity between the (LaMnO{sub 3})/(SrMnO{sub 3}) interfaces. The insulating state for n {ge} 3 obeys variable range hopping at low temperatures. We suggest that this is due to states at the Fermi level that emerge at the (LaMnO{sub 3})/(SrMnO{sub 3}) interfaces and are localized by disorder.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Acidity Constants of the Hematite-Liquid Water Interface from Ab Initio Molecular Dynamics

The interface between transition metal oxides (TMO) and liquid water plays a crucial role in environmental chemistry, catalysis, and energy science. Yet, the mechanism and energetics of chemical transformations at solvated TMO surfaces is often unclear, largely because of the difficulty to characterize the active surface species experimentally. The hematite (alpha-Fe2O3)-liquid water interface is a case in point. Here we demonstrate that ab initio molecular dynamics is a viable tool for determining the protonation states of complex interfaces. The pK a values of the oxygen-terminated (001) surface group of hematite, OH,and half-layer terminated (012) surface groups, (OH)-O-2 and (OH2)-O-1, are predicted to be (18.5 +/- 0.3), (18.9 +/- 0.6), and (10.3 +/- 0.5) pK(a) units, respectively. These are in good agreement with recent bond-valence theory based estimates, and suggest that the deprotonation of these surfaces require significantly more free energy input than previously thought.

Gittus, Oliver↗

In situ determination of lithium ion cathode/electrolyte thickness and composition as a function of charge

In this work we report the first experimental in situ determination of the thickness and estimated composition of a condensed electrode/electrolyte interface at various states of charge for the high voltage Li-ion cathode LiMn1.5Ni0.5O4 by exploiting the power of neutron reflectometry.1 Understanding the electrode/electrolyte interface is critical to developing an understanding of interfacial reactions needed to model transport phenomena and predict more stable electrolytes for electrochemical cells.2,3 However, developing the ability to control interfacial reactions in electrochemical cells is arguably one of the most critical challenges confronting researchers focused on energy storage and conversion reactions as well as liquid phase reactions such as photocatalysts and biomass conversion.2 For example, in electrochemical energy storage systems, such as batteries, the reactions between a solid electrode and a liquid electrolyte can lead to the formation of the solid electrolyte interphase (SEI), which directly mediates the stability, durability and safety of the cell. Controlling these interfacial reactions is essential to developing new, durable, and higher energy storage systems needed in the future.

Neutron Reflectometry↗

A sharp interface method for compressible liquid–vapor flow with phase transition and surface tension

The numerical approximation of non-isothermal liquid–vapor flow within the compressible regime is a difficult task because complex physical effects at the phase interfaces can govern the global flow behavior. We present a sharp interface approach which treats the interface as a shock-wave like discontinuity. Any mixing of fluid phases is avoided by using the flow solver in the bulk regions only, and a ghost-fluid approach close to the interface. The coupling states for the numerical solution in the bulk regions are determined by the solution of local two-phase Riemann problems across the interface. The Riemann solution accounts for the relevant physics by enforcing appropriate jump conditions at the phase boundary. A wide variety of interface effects can be handled in a thermodynamically consistent way. This includes surface tension or mass/energy transfer by phase transition. Moreover, the local normal speed of the interface, which is needed to calculate the time evolution of the interface, is given by the Riemann solution. The interface tracking itself is based on a level-set method. The focus in this paper is the description of the two-phase Riemann solver and its usage within the sharp interface approach. One-dimensional problems are selected to validate the approach. Finally, the three-dimensional simulation of a wobbling droplet and a shock droplet interaction in two dimensions are shown. In both problems phase transition and surface tension determine the global bulk behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancing the inherent catalytic activity and stability of TiO 2 supported Pt single-atoms at CeO x –TiO 2 interfaces

Single-atoms (SAs) with atomically coordinated reaction centers are considered the next generation of catalysts that can exhibit exceptional catalytic efficiency. However, the general concern about thermodynamic vulnerabilities of SAs questions their practical value. Moreover, whether the inherent catalytic nature of SAs is superior compared with that of larger nanoparticles is still under debate. Here, we address two controversies by a comparative study using two catalysts: Pt/TiO 2 and Pt/CeO x –TiO 2 . Based on a hierarchical study of density functional theory, time-resolved catalysis performance test, in situ infrared spectroscopy, and operando X-ray absorption spectroscopy, we could unveil the catalytic nature of Pt-SAs and their stability. By utilizing the heterogeneous interface formed between TiO 2 supporting particles and CeO x clusters formed on the surface of TiO 2 , we preferentially synthesized Pt-SAs pinned at the CeO x –TiO 2 interfaces on CeO x –TiO 2 hybrid-oxide supports. The strong electronic coupling between the Pt-SAs and the Ce ions at the CeO x –TiO 2 interfaces enhanced the catalytic activity toward CO oxidation of Pt-SAs and improved the long-term stability under CO oxidation conditions. The CO oxidation activity of Pt-SAs stabilized at CeO x –TiO 2 was improved by 13.5 times at 200 °C compared with the Pt-SAs on TiO 2 . The results present how to easily improve the activity and stability of Pt-SAs using a simple interface control method. Moreover, we demonstrate that the catalytic activity and the stability of Pt-SAs can be monitored through the chemical state of the interfaces. Finally, our study provides comprehensive understanding about the catalytic nature as well as a novel strategy toward applications of Pt-SAs, enabling sustainable use of Pt in heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transactive Energy Communications Interface Standards Landscape

Transactive energy represents distributed, optimal-seeking coordination approaches for managing the operation of large numbers of energy-related devices and systems. The concept assumes intelligent agents interact with other agents on behalf of their owners to balance the supply and demand of energy and coordinate other operation services in an electric system. They do this by exchanging value signals for services in near-term and forward time periods using market mechanisms. The technique is particularly applied to coordination of flexibility in operating distributed energy resources. The integration of large numbers of devices requires that they be able to connect and interoperate easily and reliably. Given the many technologies and solution providers integrating products, communications interfaces based on clear, unambiguous specifications with supporting tests require standardization and adoption by the community of system integrators. This report reviews the state of communications interface standards that show promise for transactive energy approaches to the coordination of distributed energy resources. It reviews promising standards to highlight challenges and gaps. It offers structured comparisons between standards and the features offered by their ecosystems of participants.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Tuning Interface Electronic Properties via Chiral Two‐Dimensional Metal‐Organic Frameworks

Control over structural symmetries in nanomaterials offers a powerful approach to engineer electronic properties. For instance, breaking of mirror symmetries in two-dimensional (2D) materials with a hexagonal lattice can lead to nontrivial electronic topologies and correlated-electron phenomena. Yet, the impact of structural chirality on the electronic properties of 2D materials and interfaces remains underexplored. Here, how chiral phases of a 2D metal-organic framework (MOF) with a hexagonal lattice—consisting of hexaazatriphenylene molecules coordinated to Cu atoms—scatter, confine, and perturb the Shockley surface state (SS) electrons of an underlying Ag(111) substrate is investigated. Via low-temperature scanning tunneling microscopy and spectroscopy, noncontact atomic force microscopy, and numerical calculations based on an electronic plane-wave expansion method, modifications of the Ag(111) SS band structure are shown and quantified, including gap openings and lifts of band degeneracies, driven exclusively by the structural chirality of the 2D MOF phases. These findings highlight how structural symmetries, in particular chirality, affect electronic states at material interfaces, expanding on the toolkit for designing 2D materials with tailored electronic properties.

band structure engineering↗

Dynamic flux surrogate-based partitioned methods for interface problems

Loosely coupled partitioned methods for multiphysics problems treat each subproblem as a separate entity and advance them independently in time. In so doing these methods enable code reuse, increase concurrency and provide a convenient framework for plug-and-play multiphysics simulations. However, mathematically loosely coupled schemes are equivalent to a single step of an iterative solution method, which can compromise their accuracy and stability. We present a new data-driven partitioned method for coupled parametric PDEs that can improve upon the accuracy of traditional loosely coupled methods without incurring a performance penalty. To that end, we replace conventional field transfers across the interface by a surrogate for the dynamics of the interface flux exchanged between the subdomains. To develop this surrogate we apply dynamic mode decomposition to a non-standard staggered-in-time state, comprising the interface flux and small solution patches near the interface. The new approach shifts the main computational burden to an offline training phase, whereas application of the surrogate in the online phase amounts to a single matrix–vector multiplication. In conclusion, we provide stability analysis of the surrogate-based partitioned scheme and include numerical results that demonstrate its potential.

Dynamic mode decomposition (DMD)↗

Hot Hole Hopping in a Polyoxotitanate Cluster Terminated with Catechol Electron Donors

Fast hole hopping in Ti 17 cat 4 , a 1 nm diameter molecular polyoxotitanate cluster bearing four catechol ligands (Ti 17 (μ 4 -O) 4 (μ 3 -O) 16 (μ 2 -O) 4 (cat) 4 (OPr i ) 16 ), was explored by ultrafast spectroscopy and quantum dynamics simulations. The catechol moieties coupled to the TiO 2 core of the cluster give rise to a charge-transfer band, the excitation of which promotes an electron from the highest occupied molecular orbital of the ligand to the inorganic core, resulting in the formation of {cat +• ,Ti 3+ }, a vibrationally hot polaronic exciton. Furthermore, dynamic depolarization measurements indicate that within less than 100 fs the Franck–Condon polaronic state formed at the interface evolves into a fully charge-separated state and the injected electron delocalizes over the quasi conduction band of the cluster. The positive charge (hole) resulting from the injection does not remain static either. The initial hole hopping between the catechol sites occurs with the rate of ~5 × 10 11 s –1 or more and competes with the intramolecular vibrational relaxation. Upon thermalization, the hopping slows and continues at a rate of ~5 × 10 10 s –1 . The experimentally observed rate of hole hopping agrees well with the results of quantum dynamics modeling of the wavepacket propagation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The investigation of Ag/ZnO interface system by first principle: The structural, electronic and optical properties

Ag/ZnO interfaces have been investigated for both of Zn-termination and O-termination by the first principle based on density functional theory. Our calculations demonstrate that the Ag atoms go inward from the Ag/ZnO interface, and the Zn and O atoms are all move outward bulk in the Zn-termination interface, and the changes are just opposite for O-termination. These behaviors are in agreement with the other studies in literatures. Furthermore, an expansion situation is observed in the first two Zn-O bilayer and first three Ag monolayers for both of Zn-termination and O-termination interfaces by comparing with the pure ZnO(0001) and Ag(111) surfaces. Moreover, the valence-band both of O-2p and Zn-3d states of Ag/ZnO interface gradual close to Femi level as the Zn, O atoms locate at the deeper layer for Zn-termination, but it is the other way round for O-termination. Calculated absorption spectrum indicates that the absorption intensity of Zn-termination interface is stronger than that of O-termination in the lower energy range (visible light region). These properties of ZnO surfaces are also evaluated for comparison with interfaces. - Graphical abstract: The structures of Ag/ZnO interface: Zn-termination (left) and O-termination (right). In this Ag/ZnO interface system, the ZnO (0001) surface is rotated 30°(R30), and Ag (111) surface is built (2×2) supercell, then a (2×√3) R30 Ag/ZnO interface is constructed using the supercell method (i.e. periodically repeated slabs). The lattice mismatch of (2×√3) R30 Ag/ZnO (2.6% mismatch) is smaller than that of (1×1) Ag/ZnO (11% mismatch).

36 MATERIALS SCIENCE↗

Variation in band offsets at ZnO/Sn:In2O3 (ITO) heterojunctions measured by x-ray photoelectron spectroscopy

Rational design and optimization of efficient photovoltaics requires fundamental knowledge of both the materials properties of the individual components and the conduction and valence band alignments at the materials interfaces. Efficient collection of electrons photogenerated in the absorber material requires a small or zero conduction band offset at both the absorber/n-type semiconductor and the n-type semiconductor/electrode interfaces. Negative conduction band offsets result in an energy barrier to electron injection, while large positive conduction band offsets (a “cliff” arrangement) result in too much energy lost during injection. However, it is difficult to predict heterojunction band offsets from bulk materials properties. Experimental band alignments of semiconductor heterojunctions rarely conform to the Anderson model,1 which assumes the band alignments are determined solely by differences in the electron affinity of the two semiconductors. Chemical bonds at the heterojunction interface give rise to an interfacial dipole which influences the interfacial band alignment. Thus, the complex interplay between electron affinity differences, Fermi level matching, interface-induced gap states, and band bending determine heterojunction band alignments.2-5 Band alignments can also be modified by doping, point defects, or control of non-stoichiometry at the interface; since these parameters can be affected by processing conditions, they offer a mechanism to modify the band alignments of a given heterojunction system.

36 MATERIALS SCIENCE↗

Photochemical Upconversion in Water Using Cu(I) MLCT Excited States: Role of Energy Shuttling at the Micellar/Water Interface

Photochemical upconversion (UC) through triplet–triplet annihilation (TTA), which employs a visible absorbing triplet photosensitizer and an annihilator, is a process that generates a high energy photon from two lower energy photons. TTA-UC has been largely developed in pure organic solvents and solid-state polymeric constructs while featuring near exclusive use of rare and expensive metals within the photosensitizer. In this current investigation, we demonstrate that TTA-UC from the long lifetime earth-abundant photosensitizer [Cu(dsbtmp) 2 ](PF) 6 (dsbtmp = 2,9-di(sec-butyl)-3,4,7,8-tetramethyl-1,10-phenanthroline), abbreviated as Cu-PS, functions in water through encapsulation within a cationic-based assembly. Cetyltrimethylammonium bromide was the surfactant of choice as it electrostatically binds the negatively charged water-soluble 10-phenylanthracene-9-carboxylate (PAC) acceptor/annihilator and ultimately facilitates energy transfer across the interface. Efficient triplet–triplet energy transfer (TTET) from Cu-PS to the PAC acceptor was achieved in this aqueous assembly. Unfortunately, the hindered mobility of the PAC moieties ultimately hampered the annihilation process, and this was reflected in attenuated TTA rates and efficiencies. The combined experimental data illustrated that the water-soluble PAC acceptor was able to vectorially deliver the excited-state energy stored in Cu-PS across the interface into the bulk aqueous solution by engaging in excited-state electron transfer with methyl viologen acceptors. Lastly, these results are important for remotely operating photoredox reactions in water while rendering a photosensitizer spatially isolated in the hydrophobic core of a micelle.

36 MATERIALS SCIENCE↗