Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interference Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Computed Flow About The Integrated Space Shuttle

Report discusses numerical simulations of flow of air about integrated Space Shuttle in ascent. Goal: to improve understanding of, and ability to predict, how integrated Space Shuttle will perform during both nominal and aborted ascent under various conditions. These and other numerical simulations intended both to supplement wind-tunnel data, corrupted to some extent by scaling and wall-interference effects, and to compensate for scarcity of valid flight data.

Buning, P. G.↗

Clutter filter design considerations for Airborne Doppler radar detection of windshear

The problem of clutter rejection when processing down-looking Doppler radar returns from a low altitude airborne platform is a paramount problem. With radar as a remote sensor for detecting and predicting windshear in the vicinity of an urban airport, dynamic range requirements can exceed 50 dB because of high clutter to signal ratios. This presentation describes signal processing considerations in the presence of distributed and/or discrete clutter interference. Previous analyses have considered conventional range cell processing of radar returns from a rigidly mounted radar platform using either the Fourier or the pulse-pair method to estimate average windspeed and windspeed variation within a cell. Clutter rejection has been based largely upon analyzing a particular environment in the vicinity of the radar and employing a variety of techniques to reduce interference effects including notch filtering, Fourier domain line editing, and use of clutter maps. For the airborne environment the clutter characteristics may be somewhat different. Conventional clutter rejection methods may have to be changed and new methods will probably be required to provide useful signal to noise ratios. Various considerations are described. A major thrust has been to evaluate the effect of clutter rejection filtering upon the ability to derive useful information from the post-filter radar data. This analysis software is briefly described. Finally, some ideas for future analysis are considered including the use of adaptive filtering for clutter rejection and the estimation of windspeed spatial gradient directly from radar returns as a means of reducing the effects of clutter on the determination of a windshear hazard.

Baxa, Ernest G., Jr.↗

Tangential, semisubmerged, and internal store carriage and separation at supersonic speeds

This paper presents a general overview of experimental research conducted in the area of tangential, semisubmerged, and internal store carriage and separation at supersonic speeds. Some of the advantages and disadvantages of tangential and semisubmerged carriage are presented along with a discussion of the interference effects between stores mounted in various arrays. Also included is a review of cavity flow fields that exist at supersonic speeds and a discussion of the effect of cavity size and cavity doors on the separation characteristics of stores. Finally, three passive venting systems are described which can modify the flow field of certain cavities and thus improve the separation characteristics of stores from those cavities.

Wilcox, Floyd J., Jr.↗

Rotational modulation in IUE spectra of cool dwarf chromospheres. I - Data analysis and period search techniques

Time-sequenced IUE spectra of a number of a bright F-K dwarfs have been used to investigate rotational modulation in several important chromospheric and transition emission lines. Stellingwerf's phase dispersion minimization (PDM) technique forms the basis of this time-series analysis of these sparsely sampled, irregularly spaced observational sequences, which consist of no more than 13 spectra in any one season. In such highly sample-limited time series, the resultant PDM spectrum is greatly complicated by overlapping alias orders which invariably produce strong interference effects, but the deliberately irregular sampling has proven of value in the development of techniques to identify the intrinsic stellar flux modulation period. Two stars are selected to illustrate these new techniques in detail.

Hallam, K. L.↗

Conclusions from high-speed rotorcraft studies

Under the tutelage of NASA-Ames, evaluations have been made of the technology required for high-speed rotorcraft flight with a view to the performance potential and development risks of several candidate configurations. Configurational performance limitations were associated with rotor performance at high Mach numbers and advance ratios, nacelle interference effects on rotor flow, and wing/rotor aeroelastic stability requirements. Attention is given to tiltwing, tilt-for-VTOL/fold-for-cruise rotor, and conventional tiltrotor configurations capable of carrying 30 passengers for the intercity commuter market.

Conway, Scott↗

Experimental study of an independently deflected wingtip mounted on a semispan wing

The results of a subsonic wind tunnel test of a semispan wing with an independently deflected tip surface are presented and analyzed. The tip surface was deflected about the quarter chord of the rectangular wing and accounted for 17 percent of the wing semispan. The test was conducted to measure the loads on the tip surface and to investigate the nature of aerodynamic interference effects between the wing and the deflected tip. Results are presented for two swept tip surfaces of similar planform but different airfoil distributions. The report contains plots of tip lift, drag, and pitching moment for various Reynolds numbers and tip deflection angles with respect to the inboard wing. Oil flow visualization photographs for a typical Reynolds number are also included. Important aerodynamic parameters such as lift and pitching moment slopes and tip aerodynamic center location are tabulated. A discussion is presented on the relationship between tip experimental data acquired in a steady flow and the prediction of unsteady tip motion at fixed wing angles of attack.

Martin, D. M.↗

Spectra, composition, and interactions of nuclei with magnet interaction chambers

Emulsion chambers will be flown in the Astromag Facility to measure the cosmic ray composition and spectra to 10 exp 15 eV total energy and to definitively study the characteristics of nucleus-nucleus interactions above 10 exp 12 eV/n. Two configurations of emulsion chambers will be flown in the SCIN/MAGIC experiment. One chamber has an emulsion target and a calorimeter similar to those recently flown on balloons for composition and spectra measurements. The other has an identical calorimeter and a low-density target section optimized for performing rigidity measurements on charged particles produced in interactions. The transverse momenta of charged and neutral mesons, direct hadronic pairs from resonance decays and interference effects, and possible charge clustering in high-density states of matter will be studied.

Parneil, T. A.↗

Resonant cryogenic chopper

An account is given of the design features, construction, and performance of a both mechanically and thermally robust, resonant cryogenic chopper operating at 4.2 K. The chopper can occult a 2.54-cm aperture at 4.5 Hz, with approximately 1-mW dissipation. The controllability of the stator and rotor magnetic fields facilitates performance optimization and the determination of any possible interference effects. Attention is given to long-term amplitude stability determinations.

Page, Lyman A.↗

Emission spectra of selected SSME elements and materials

Stennis Space Center (SSC) is pursuing the advancement of experimental techniques and theoretical developments in the field of plume spectroscopy for application to rocket development testing programs and engine health monitoring. Exhaust plume spectral data for the Space Shuttle Main Engine (SSME) are routinely acquired. The usefulness of this data depends upon qualitative and quantitative interpretation of spectral features and their correlation with the engine performance. A knowledge of the emission spectral characteristics of effluent materials in the exhaust plume is essential. A study of SSME critical components and their materials identified 30 elements and 53 materials whose engine exhaust plume spectral might be required. The most important were evaluated using SSC's Diagnostic Testbed Facility Thruster (DTFT), a 1200-lbf, liquid oxygen/gaseous hydrogen rocket engine which very nearly replicates the temperature and pressure conditions of the SSME exhaust plume in the first Mach diamond. This report presents the spectral data for the 10 most important elements and 27 most important materials which are strongly to moderately emitting in the DTFT exhaust plume. The covered spectral range is 300 to 426 nm and the spectral resolution is 0.25 nm. Spectral line identification information is provided and line interference effects are considered.

Tejwani, Gopal D.↗

Seasonal and latitudinal variations of gravity wave-driven fluctuations in OH nightglow

A model which incorporates extended OH-layer emission and gravity-wave dynamics with eddy diffusivities is set forth to analyze seasonal and latitudinal variations in the OH nightglow. The 2D analysis is aimed at determining the nature of the relationship between the oscillation in intensity about a mean intensity and the oscillation in temperature of the emission region about a mean temperature. Competing eddy diffusivities modify the local values and altitudes of maximum wave amplitude, so long-period characterization of the relationship is imprecise. Seasonal trends in the relationship are noted for periods of several hrs or less that are primarily related to seasonal changes in the mesopause undisturbed temperature. Latitudinal trends are shown to be less pronounced, and trends that exist at intermediate periods are difficult to isolate due to interference effects.

Hickey, M. P.↗

Unstructured grid solutions to a wing/pylon/store configuration using VGRID3D/USM3D

The purpose of this paper is to validate an inviscid flow solution package based on a new unstructured grid methodology using experimental data on a wing/pylon/store configuration. The solution package consists of an advancing front unstructured grid generator, VGRID3D, and an efficient Euler equation solver, USM3D. Comparisons of computed data versus experimental data are made for two free-stream Mach numbers at five store locations relative to the wing. Both rigid body aerodynamics and mutual interference effects are explored. A very good agreement is observed between computed and wind tunnel data.

Parikh, Paresh↗

TranAir applications to predicting transonic aircraft/store loads

During a recent AIWS wind tunnel test for the F-18, the AIWS grid loads were in substantial disagreement with carriage loads measured on the opposite pylon at M = 0.95. Carriage loads indicated that the AIWS configuration might impact the fuel tank mounted on the inboard pylon during jettison at M = 0.95, while CTS data indicated this to be a safe jettison condition. An attempt was made to determine the correct loads for this condition. On the basis of PAN AIR and TranAir calculations, it appears that the carriage loads are correct, while the CTS measured grid data may be subject to sting-fuel tank interference effects at transonic speeds.

Cenko, A.↗

Production of H-3 at large momentum in alpha-(C-12) collisions at 2A GeV

Calculations of the longitudinal and transverse momentum distributions for H-3 production at large momentum in alpha-(C-12) collisions near 2A GeV are compared to experiment. Triton exchange and final-state interactions are shown to represent large corrections to the impulse approximation for proton knockout. A method for calculating interference effects for inelastic fragmentation is discussed. Good agreement with experiment using a phenomenological overlap function for (H-3)-p is found successful in describing H-3 production in pion-induced reactions. Comparisons to momentum distributions obtained through (p, 2p) and (e, ep) reactions on He-4 are made.

Cucinotta, Francis A.↗

Moving body overset grid methods for complete aircraft tiltrotor simulations

A hypothetical, but realistic, set of flight conditions for the V-22 aircraft is established to facilitate rigorous testing of a new domain connectivity algorithm, and to carry out an overset grid proof-of-concept tiltrotor simulation. Relative motion and interference effects between the V-22 airframe and rotor-blades are directly simulated within the context of an unsteady, thin-layer Navier-Stokes computation. The domain connectivity algorithm is verified to perform at rates equal to or greater than those realized previously for store-separation-like applications. The feasibility of carrying out unsteady Navier-Stokes analyses of rotorcraft problems is demonstrated.

Meakin, Robert L.↗

The estimation of the rate of change of yawing moment with sideslip

Wind-tunnel data are presented on the rate of change of yawing moment with sideslip for tests of 9 complete airplane models, 20 fuselage shapes, and 3 wing models with various combinations of dihedral, sweepback, and twist. The data were collected during a survey of existing information, which was made to find a reliable method of computing the yawing moment due to sideslip. Important errors common to methods of computation used at present appear to be due to large interference effects, the investigation of which will undoubtedly require an extensive program of systematic wind-tunnel tests. At present it is necessary to place considerable reliance on past design experience in proportioning an airplane so as to obtain a reasonable degree of directional stability.

Imlay, Frederick H↗

High-Speed Tests of a Model Twin-Engine Low-Wing Transport Airplane

Report presents the results of force tests made of a 1/8-scale model of a twin-engine low-wing transport airplane in the NACA 8-foot high-speed tunnel to investigate compressibility and interference effects of speeds up to 450 miles per hour. In addition to tests of the standard arrangement of the model, tests were made with several modifications designed to reduce the drag and to increase the critical speed.

Becker, John V↗

Aerodynamic Characteristics of a Refined Deep-Step Planing-Tail Flying-Boat Hull with Various Forebody and Afterbody Shapes

An investigation was made in the Langley 300 mph 7-by 10-foot tunnel to determine the aerodynamic characteristics of a refined deep-step planing-tail hull with various forebody and afterbody shapes. For comparison, tests were made on a streamline body simulating the fuselage of a modern transport airplane. The results of the tests, which include the interference effects of a 21-percent-thick support wing, indicated that for corresponding configurations the hull models incorporating a forebody with a length-beam ratio of 7 had lower minimum drag coefficients than the hull models incorporating a forebody with a length-beam ratio of 5. Longitudinal and lateral stability was generally about the same for all hull models tested and about the same as that of a conventional hull.

Riebe, John M↗