Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inverters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

A correlation of mixing noise from coannular jets with inverted flow profiles

Data are correlated for jet mixing noise from coannular jets with inverted flow velocity profiles. The acoustic performance of coannular jets is compared to the performance of a hypothetical single jet with the same total mass flow, thrust, and total enthalpy flow as the coannular jet. The study shows that coannular jets with velocity ratios greater than 1.2 produce less noise than their corresponding equivalent tests and that optimum noise reduction of coannular jets in the data set occurs within a range of equivalent velocities between 500 and 700 meters per second and velocity ratios between 1.6 and 2.3. The maximum sound power reduction is found to be about 4 decibels. Directivity indices and a special set of spectral curves were developed to describe the characteristic double peak spectra of coannular jet noise. The temperature ratio between the inner and outer streams was not found to be important in this acoustic correlation. However, the mean temperature effect was included in the computations of sound pressure levels.

Pao, S. P.↗
NASA NTRS1979

Studies of the acoustic transmission characteristics of coaxial nozzles with inverted velocity profiles: Comprehensive data report

The efficiency of internal noise radiation through a coannular exhaust nozzle with an inverted velocity profile was studied. A preliminary investigation was first undertaken (1) to define the test parameters which influence the internal noise radiation; (2) to develop a test methodology which could realistically be used to examine the effects of the test parameters; and (3) to validate this methodology. The result was the choice of an acoustic impulse as the internal noise source in the jet nozzles. Noise transmission characteristics of a coannular nozzle system were then investigated. In particular, the effects of fan convergence angle, core extension length to annulus height ratio and flow Mach numbers and temperatures were studied. Relevant spectral data only is presented in the form of normalized nozzle transfer function versus nondimensional frequency.

Dean, P. D.↗
NASA NTRS1979

Aerodynamic and acoustic investigation of inverted velocity profile coannular exhaust nozzle models and development of aerodynamic and acoustic prediction procedures

Five co-annular nozzle models, covering a systematic variation of nozzle geometry, were tested statically over a range of exhaust conditions including inverted velocity profile (IVP) (fan to primary stream velocity ratio 1) and non IVP profiles. Fan nozzle pressure ratio (FNPR) was varied from 1.3 to 4.1 at primary nozzle pressure ratios (PNPR) of 1.53 and 2.0. Fan stream temperatures of 700 K (1260 deg R) and 1089 K(1960 deg R) were tested with primary stream temperatures of 700 K (1260 deg R), 811 K (1460 deg R), and 1089 K (1960 deg R). At fan and primary stream velocities of 610 and 427 m/sec (2000 and 1400 ft/sec), respectively, increasing fan radius ratio from 0.69 to 0.83 reduced peak perceived noise level (PNL) 3 dB, and an increase in primary radius ratio from 0 to 0.81 (fan radius ratio constant at 0.83) reduced peak PNL an additional 1.0 dB. There were no noise reductions at a fan stream velocity of 853 m/sec (2800 ft/sec). Increasing fan radius ratio from 0.69 to 0.83 reduced nozzle thrust coefficient 1.2 to 1.5% at a PNPR of 1.53, and 1.7 to 2.0% at a PNPR of 2.0. The developed acoustic prediction procedure collapsed the existing data with standard deviation varying from + or - 8 dB to + or - 7 dB. The aerodynamic performance prediction procedure collapsed thrust coefficient measurements to within + or - .004 at a FNPR of 4.0 and a PNPR of 2.0.

Larson, R. S.↗
NASA NTRS1979

Effects of geometric and flow-field variables on inverted-velocity-profile coaxial jet noise and source distributions

This paper presents relationships between the noise generation characteristics and the flow-field characteristics for inverted-velocity-profile coaxial jets. Noise measurements were made at four different sideline distances in order to determine the apparent noise source locations, and flow-field characteristics were determined from jet plume pressure/temperature surveys. These relationships are based on a published NASA Lewis prediction model, the basic assumptions of which are shown to be consistent with the experimental data reported herein. Improvements to the noise prediction procedure, on the basis of the present study, are included, which increase the accuracy of the high-frequency noise prediction.

Stone, J. R.↗
NASA NTRS1979

Effect of density on noise radiation from subsonic inverted velocity profile jets

In this study, experiments were performed to investigate the influence of jet density in the generation of noise from inverted velocity profile subsonic jets. Such jets consist of low-speed gas flow in the center and a higher-speed annular flow. A combination of helium, nitrogen, and argon gases at various flow velocities were expanded through center and through annular convergent nozzles to obtain the desired density effects. Shadowgraphs of the jet flow were obtained, and mean velocity profiles and radiated noise were measured. The results clearly show that a difference in density between the inner and outer flows is an important factor in the development of the jet flow and in the production of jet noise.

Sarohia, V.↗
NASA NTRS1979

Studies of the acoustic transmission characteristics of coaxial nozzles with inverted velocity profiles, volume 1

The efficiency of internal noise radiation through coannular exhaust nozzle with an inverted velocity profile was studied. A preliminary investigation was first undertaken to: (1) define the test parameters which influence the internal noise radiation; (2) develop a test methodology which could realistically be used to examine the effects of the test parameters; (3) and to validate this methodology. The result was the choice of an acoustic impulse as the internal noise source in the in the jet nozzles. Noise transmission characteristics of a nozzle system were then investigated. In particular, the effects of fan nozzle convergence angle, core extention length to annulus height ratio, and flow Mach number and temperatures were studied. The results are presented as normalized directivity plots.

Dean, P. D.↗
NASA NTRS1979

Fluctuations of inverted V electron fluxes

Fluctuations of low-energy electron fluxes during an inverted V event on Nov. 5, 1975 were detected by fixed-energy electrostatic analyzers used in the LEE (low-energy electron) experiment onboard the AE-D satellite. The flux fluctuations were observed at energies of 0.78, 1.38, and 2.62 keV, when these energies were below that of the monoenergetic beam. This suggests that the fluctuations might occur over a wide range of energies. The fluctuations were confined within a pitch angle of 15 degrees, the amplitude increasing with decreasing pitch angle. The oscillation frequencies centered around 1.75 Hz. Fluctuations at two energies were generally correlated. The heating of secondary electrons, deduced from an analysis of the distribution function, is attributed to anomalous heating by electron plasma wave turbulence, whose intensity was modulated by a low-frequency wave. The results are consistent with a model, according to which auroral precipitating electron beams enhance the anomalous resistivity at the topside ionosphere through parametric instabilities.

Lin, C. S.↗
NASA NTRS1981

Acoustic and aerodynamic performance investigation of inverted velocity profile coannular plug nozzles

The results of model scale parametric static and wind tunnel aerodynamic performance tests on unsuppressed coannular plug nozzle configurations with inverted velocity profile are discussed. The nozzle configurations are high-radius-ratio coannular plug nozzles applicable to dual-stream exhaust systems typical of a variable cycle engine for Advanced Supersonic Transport application. In all, seven acoustic models and eight aerodynamic performance models were tested. The nozzle geometric variables included outer stream radius ratio, inner stream to outer stream ratio, and inner stream plug shape. When compared to a conical nozzle at the same specific thrust, the results of the static acoustic tests with the coannular nozzles showed noise reductions of up to 7 PNdB. Extensive data analysis showed that the overall acoustic results can be well correlated using the mixed stream velocity and the mixed stream density. Results also showed that suppression levels are geometry and flow regulation dependent with the outer stream radius ratio, inner stream-to-outer stream velocity ratio and inner stream velocity ratio and inner stream plug shape, as the primary suppression parameters. In addition, high-radius ratio coannular plug nozzles were found to yield shock associated noise level reductions relative to a conical nozzle. The wind tunnel aerodynamic tests showed that static and simulated flight thrust coefficient at typical takeoff conditions are quite good - up to 0.98 at static conditions and 0.974 at a takeoff Mach number of 0.36. At low inner stream flow conditions significant thrust loss was observed. Using an inner stream conical plug resulted in 1% to 2% higher performance levels than nozzle geometries using a bent inner plug.

Knott, P. R.↗
NASA NTRS1981

A Single-Expression Formula for Inverting Strain-Life and Stress-Strain Relationships

Starting with the basic fatigue lift formula, an inversion formula is derived. The inversion formula is valid over the entire life range of engineering interest for all materials examined. Conformity between the two equations is extremely close, suitable for all engineering problems. The approach used to invert the life relation is also suitable for the inversion of other formulas involving the sum of two power-law terms.

Manson, S. S.↗
NASA NTRS1981

Shock associated noise reduction from inverted-velocity-profile coannular jets

Acoustic measurements show that the shock noise from the outer stream is virtually eliminated when the inner stream is operated at a Mach number just above unity, regardless of all the other jet operating conditions. At this optimum condition, the coannular jet provides the maximum noise reduction relative to the equivalent single jet. The shock noise reduction can be achieved at inverted-as well as normal-velocity-profile conditions, provided the coannular jet is operated with the inner stream just slightly supersonic. Analytical models for the shock structure and shock noise are developed indicate that a drastic change in the outer stream shock cell structure occurs when the inner stream increases its velocity from subsonic to supersonic. At this point, the almost periodic shock cell structure of the outer stream nearly completely disappears the noise radiated is minimum. Theoretically derive formulae for the peak frequencies and intensity scaling of shock associated noise are compared with the measured results, and good agreement is found for both subsonic and supersonic inner jet flows.

Tanna, H. K.↗
NASA NTRS1981

Noise radiated from inverted velocity profile jets under simulated flight

Measurements were made of the noise radiated by an inverted profile coannular jet. The measurements were made inside an anechoic chamber and forward flight was simulated with an open jet surrounding a coannular nozzle. The diameters of the center and the annular nozzles were 1.27 cm and 2.03 cm, respectively. The open jet wind tunnel was 17.1 cm in diameter and could be operated at speeds up to 150 m/sec. Noise measurements were made in the acoustic far field at several spherical angles ranging from 20 deg to 120 deg relative to the jet axis. Flow through the center jet decreased the noise radiated by the annular jet. The addition of forward velocity further decreased the noise, and the two noise reductions seem to be additive. Measurements of the mean velocity profile demonstrate that forward flight reduced the growth rate of the high speed annular jet, and that center flow reduced the rate of merging of the annular jet.

Petersen, R. A.↗
NASA NTRS1982

Modeling and analysis of several classes of self-oscillating inverters. I - State-plane representations. II - Model extension, classification, and duality relationships

The present investigation is concerned with an important class of power conditioning networks, taking into account self-oscillating dc-to-square-wave transistor inverters. The considered circuits are widely used both as the principal power converting and processing means in many systems and as low-power analog-to-discrete-time converters for controlling the switching of the output-stage semiconductors in a variety of power conditioning systems. Aspects of piecewise-linear modeling are discussed, taking into consideration component models, and an equivalent-circuit model. Questions of singular point analysis and state plane representation are also investigated, giving attention to limit cycles, starting circuits, the region of attraction, a hard oscillator, and a soft oscillator.

Lee, F. C. Y.↗
NASA NTRS1983

Studies of the Inverted Meniscus Deposition of Silicon on Ceramic

Controlled temperature profiles essential to production of solar cells. Studies of inverted meniscus process for depositing silicon coatings on ceramic substrates described in new report. When fully developed, processed used to manufacture low-cost solar photovoltaic cells.

Zook, J. D.↗
NASA NTRS1984

Energy-Saving Inverter

Commutation by field-effect transistor allows more efficient operation. High voltage field-effect transistor (FET) controls silicon controlled rectifiers (SCR's). Circuit requires only one capacitor and one inductor in commutation circuit: simpler, more efficient, and more economical than conventional inverters. Adaptable to dc-to-dc converters.

Rippel, W. E.↗