Search NASA⌕ Search

SEARCH · Search NASA

Results for “Isolation Condenser”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Identifying Majorana vortex modes via nonlocal transport

The combination of two-dimensional Dirac surface states with s-wave superconductivity is expected to generate localized topological Majorana zero modes in vortex cores. Putative experimental signatures of these modes have been reported for heterostructures of proximitized topological insulators, iron-based superconductors or certain transition metal dichalcogenides. Despite these efforts, the Majorana nature of the observed excitation is still under debate. In this work, we propose to identify the presence of Majorana vortex modes using a nonlocal transport measurement protocol originally employed for one-dimensional settings. In the case of an isolated subgap state, the protocol provides a spatial map of the ratio of local charge- and probability-density which offers a clear distinction between Majorana and ordinary fermionic modes. We show that these distinctive features survive in the experimentally relevant case of hybridizing vortex core modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Distributed Fiber Optic Sensing to Identify Locations of Resistive Transitions in REBCO Conductors and Magnets

High-temperature superconductors such as REBa 2 Cu 3 O 7-x (REBCO, RE = rare earth) can generate strong magnetic fields that are promising for applications in particle accelerators and compact fusion reactors. Traditionally, voltage taps are installed in superconducting magnets to measure the voltage signals due to resistive transitions. The voltage-tap-based diagnostics is important for the development of magnet technology as it can help pinpoint the locations in the magnet windings that limit the magnet performance. The architecture of the multi-tape REBCO cable such as CORC wires, however, makes it difficult to apply the voltage-tap-based diagnostics to identify the locations of resistive transitions. Distributed fiber optic sensing (DFOS) has the potential to address this issue. In this paper, we report the measurements of thermal strain along a CORC wire based on optical frequency domain reflectometry with a maximum spatial resolution of 0.65 mm and a temporal resolution of 10 Hz. The optical fiber is co-wound with the CORC wire that is epoxy impregnated. During the test, current was increased until a resistive transition occurred in the conductor. The spectrum shift of the reflected light along the fiber was recorded. The results suggested that with proper thermal isolation from the cryogen, DFOS can be used to identify the locations of resistive transitions in CORC wires and magnets. In conclusion, the results will allow a better understanding of the causes of resistive transitions in REBCO conductors and magnets, which will help improve the REBCO magnet technology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single atom identification by energy dispersive x-ray spectroscopy

Using aberration-corrected scanning transmission electron microscope and energy dispersive x-ray spectroscopy, single, isolated impurity atoms of silicon and platinum in monolayer and multilayer graphene are identified. Simultaneously acquired electron energy loss spectra confirm the elemental identification. Contamination difficulties are overcome by employing near-UHV sample conditions. Signal intensities agree within a factor of two with standardless estimates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Peculiarly strong room-temperature ferromagnetism from low Mn-doping in ZnO grown by molecular beam epitaxy

Strong room-temperature ferromagnetism is demonstrated in single crystalline Mn-doped ZnO thin films grown by molecular beam epitaxy. Very low Mn doping concentration is investigated, and the measured magnetic moment is much larger than what is expected for an isolated ion based on Hund's rules. The ferromagnetic behavior evolves with Mn concentration. Both magnetic anisotropy and anomalous Hall effect confirm the intrinsic nature of ferromagnetism. While the Mn dopant plays a crucial role, another entity in the system is needed to explain the observed large magnetic moments.

36 MATERIALS SCIENCE↗

Microscopic model for exchange bias from grain-boundary disorder in a ferromagnet/antiferromagnet thin film with a nanocrystalline microstructure

Monte Carlo spin simulations were coupled to a Voronoi microstructure-generator to predict the magnitude and behavior of exchange bias in a ferromagnet/antiferromagnet (AF) thin film bilayer with a nanocrystalline microstructure. Our model accounts for the effects of irregular grain-shapes, finite-sized particles, and the possible presence of local random-fields originating from the antiferromagnet's grain-boundary regions. As the grain-boundary represents a crystal-structure distortion, we model the local effect on the exchange constants in the Gaussian approximation which can cause regions resembling a spin glass confined to an unusual 2D topology. Although an ensemble of completely disconnected AF grains isolated by non-magnetic barriers provides a small exchange bias, the introduction of a spin-glass network at the boundaries causes a four-fold enhancement in the magnitude of the loop-shift. This implies the importance of local grain-boundary behavior in defect-engineered antiferromagnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Note: A component-level frequency tunable isolator for vibration-sensitive chips using SMA beams

This note presents a component-level frequency tunable isolator for vibration-sensitive chips. The isolator employed 8 U-shaped shape memory alloy (SMA) beams to support an isolation island (used for mounting chips). Due to the temperature-induced Young’s modulus variation of SMA, the system stiffness of the isolator can be controlled through heating the SMA beams. In such a way, the natural frequency of the isolator can be tuned. A prototype was fabricated to evaluate the concept. The test results show that the natural frequency of the isolator can be tuned in the range of 64 Hz–97 Hz by applying different heating strategies. Moreover, resonant vibration can be suppressed significantly (the transmissibility decreases about 65% near the resonant frequency) using a real-time tuning method.

36 MATERIALS SCIENCE↗

GIANT LOBES OF CENTAURUS A RADIO GALAXY OBSERVED WITH THE SUZAKU X-RAY SATELLITE

We report on Suzaku observations of selected regions within the southern giant lobe of the radio galaxy Centaurus A. In our analysis we focus on distinct X-ray features detected with the X-ray Imaging Spectrometer within the range 0.5-10 keV, some of which are likely associated with fine structure of the lobe revealed by recent high-quality radio intensity and polarization maps. With the available photon statistics, we find that the spectral properties of the detected X-ray features are equally consistent with thermal emission from hot gas with temperatures kT > 1 keV, or with a power-law radiation continuum characterized by photon indices {Gamma} {approx} 2.0 {+-} 0.5. However, the plasma parameters implied by these different models favor a synchrotron origin for the analyzed X-ray spots, indicating that a very efficient acceleration of electrons up to {approx}> 10 TeV energies is taking place within the giant structure of Centaurus A, albeit only in isolated and compact regions associated with extended and highly polarized radio filaments. We also present a detailed analysis of the diffuse X-ray emission filling the whole field of view of the instrument, resulting in a tentative detection of a soft excess component best fitted by a thermal model with a temperature of kT {approx} 0.5 keV. The exact origin of the observed excess remains uncertain, although energetic considerations point to thermal gas filling the bulk of the volume of the lobe and mixed with the non-thermal plasma, rather than to the alternative scenario involving a condensation of the hot intergalactic medium around the edges of the expanding radio structure. If correct, this would be the first detection of the thermal content of the extended lobes of a radio galaxy in X-rays. The corresponding number density of the thermal gas in such a case is n{sub g} {approx} 10{sup -4} cm{sup -3}, while its pressure appears to be in almost exact equipartition with the volume-averaged non-thermal pressure provided by the radio-emitting electrons and the lobes' magnetic field. A prominent large-scale fluctuation of the Galactic foreground emission, resulting in excess foreground X-ray emission aligned with the lobe, cannot be ruled out. Although tentative, our findings potentially imply that the structure of the extended lobes in active galaxies is likely to be highly inhomogeneous and non-uniform, with magnetic reconnection and turbulent acceleration processes continuously converting magnetic energy to internal energy of the plasma particles, leading to possibly significant spatial and temporal variations in the plasma {beta} parameter around the volume-averaged equilibrium condition {beta} {approx} 1.

79 ASTRONOMY AND ASTROPHYSICS↗

Electric dipole radiation near a mirror

The emission of radiation by a linearly oscillating electric dipole is drastically altered when the dipole is close to the surface of a mirror. The energy is not emitted along optical rays, as for a free dipole, but as a set of four optical vortices. The field lines of energy flow spiral around a set of two lines through the dipole. At a larger distance from the dipole, singularities and isolated vortices appear. It is shown that these interference vortices are due to the vanishing of the magnetic field at their centers. In the plane of the mirror there is a singular circle with a diameter which is proportional to the distance between the dipole and the mirror. Inside this circle, all energy flows to a singularity on the mirror surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interplay between Local Moment and Itinerant Magnetism in the Layered Metallic Antiferromagnet TaFe 1.14 Te 3

Two-dimensional antiferromagnets have garnered considerable interest for the next generation of functional spintronics. However, many bulk materials from which two-dimensional antiferromagnets are isolated are limited by their air sensitivity, low ordering temperatures, and insulating transport properties. TaFe 1+y Te 3 aims to address these challenges with increased air stability, metallic transport, and robust antiferromagnetism. Here, we synthesize TaFe 1+y Te 3 (y = 0.14), identify its structural, magnetic, and electronic properties, and elucidate the relationships between them. Axial-dependent high-field magnetization measurements on TaFe 1.14 Te 3 reveal saturation magnetic fields ranging between 27-30 T with saturation magnetic moments of 2.05- 2.12 μ B . Magnetotransport measurements confirm TaFe 1.14 Te 3 is metallic with strong coupling between magnetic order and electronic transport. Angle-resolved photoemission spectroscopy measurements across the magnetic transition uncover a complex interplay between itinerant electrons and local magnetic moments that drives the magnetic transition. In conclusion, we demonstrate the ability to isolate few-layer sheets of TaFe 1.14 Te 3 , establishing TaFe 1.14 Te 3 as a potential platform for two-dimensional spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cooper Pair Density of Bi 2 Sr 2 CaCu 2 O 8+ x in Atomic scale at 4.2 K

In pursuit of the elusive mechanism of high-T C superconductors (HTSC), spectroscopic imaging scanning tunneling microscopy (SI-STM) is an indispensable tool for surveying local properties of HTSC. Since a conventional STM utilizes metal tips, which allow the examination of only quasiparticles and not superconducting (SC) pairs, Josephson tunneling using STM has been demonstrated by many authors in the past. An atomically resolved scanning Josephson tunneling microscopy (SJTM), however, was realized only recently on Bi 2 Sr 2 CaCu 2 O 8+x (Bi-2212) below 50 mK and on the Pb(110) surface at 20 mK. Here we report the atomically resolved SJTM on Bi 2 Sr 2 CaCu 2 O 8+x at 4.2 K using Bi-2212 tips created in situ. The I-V characteristics show clear zero bias conductance peaks following Ambegaokar-Baratoff (AB) theory. A gap map was produced for the first time using an atomically resolved Josephson critical current map I C (r) and AB theory. Surprisingly, we found that this new gap map is anticorrelated to the gap map produced by a conventional method relying on the coherence peaks. Quasiparticle resonance due to a single isolated zinc atom impurity was also observed by SJTM, indicating that atomically resolved SJTM was achieved at 4.2 K. Lastly, our result provides a starting point for realizing SJTM at even higher temperatures, rendering possible investigation of the existence of SC pairs in HTSC above the T C .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Upper limit on shift current generation in extended systems

Despite a long history of research into nonlinear response theory, there has been no systematic investigation into the maximum amount of nonlinear optical response attainable in solid-state materials. Here in this work, we present an upper bound on the second-order response functions of materials, which controls the shift current response. We show that this bound depends on the band gap, bandwidth, and geometrical properties of the material in question. We find that delocalized systems generally have larger responses than more localized or isolated ones. As a proof of principle, we perform first-principles calculations of the response tensors of a wide variety of materials, finding that the materials in our database do not yet saturate the upper bound. This suggests that new large shift current materials will likely be discovered by future materials research guided by the factors mentioned in this work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonon dispersion throughout the iron spin crossover in ferropericlase

Ferropericlase (Fp), (Mg 1– x Fex)O, is the second most abundant phase in the Earth's lower mantle. At relevant pressure-temperature conditions, iron in Fp undergoes a high spin (HS), $\textit{S}$ = 2, to low spin (LS), $\textit{S}$ = 0, state change. The nature of this phenomenon is quite well understood now, but there are still basic questions regarding the structural stability and the existence of soft phonon modes during this iron state change. General theories exist to explain the volume reduction, the significant thermoelastic anomalies, and the broad nature of this HS-LS crossover. These theories make extensive use of the quasiharmonic approximation. Therefore, dynamical and structural stability is essential to their validity. Here, we investigate the vibrational spectrum of Fp throughout this spin crossover using ab initio density-functional theory $+U_{sc}$ calculations. We address vibrational modes associated with isolated and (second-)nearest-neighbor iron ions undergoing the HS-LS state change. As expected, acoustic modes of this solid solution are resilient, while optical modes are the most affected. In this work, we show that there are no soft phonon modes across this HS-LS crossover, and Fp is dynamically stable at all relevant pressures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flat-band topology of magic angle graphene on a transition metal dichalcogenide

In this work, we consider twisted bilayer graphene on a transition metal dichalcogenide substrate, where proximity-induced spin-orbit coupling significantly alters the eight flat bands which occur near the magic angle. The resulting band structure features a pair of extremely flat bands across most of the mini-Brillouin zone. Further details depend sensitively on the symmetries of the heterostructure; we find semiconducting band structures when all twofold rotations around the in-plane axis are broken, and semimetallic band structures otherwise. We calculate the Chern numbers of the different isolated bands, and identify the parameter regimes and filling factors where valley Chern insulators and topological insulators are realized. Interestingly, we find that for realistic values of the proximity-induced terms, it is possible to realize a topological insulator protected by time-reversal symmetry by doping two holes or two electrons per superlattice unit cell into the system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unraveling the mysterious failure of Cu/SAPO-34 selective catalytic reduction catalysts

Commercial Cu/SAPO-34 selective catalytic reduction (SCR) catalysts have experienced unexpected and quite perplexing failure. Understanding the causes at an atomic level is vital for the synthesis of more robust Cu/SAPO-34 catalysts. Here we show, via application of model catalysts with homogeneously dispersed isolated Cu ions, that Cu transformations resulting from low-temperature hydrothermal aging and ambient temperature storage can be semi-quantitatively probed with 2-dimensional pulsed electron paramagnetic resonance. Coupled with kinetics, additional material characterizations and DFT simulations, we propose the following catalyst deactivation steps: (1) detachment of Cu(II) ions from cationic positions in the form of Cu(OH)2; (2) irreversible hydrolysis of the SAPO-34 framework forming terminal Al species; and (3) interaction between Cu(OH)2 and terminal Al species forming SCR inactive, Cu-aluminate like species. Especially significant is that these reactions are greatly facilitated by condensed water molecules under wet ambient conditions, causing low temperature failure of the commercial Cu/SAPO-34 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Orientation-controlled nonepitaxial L1{sub 0} FePt thin films

We report an orientation-controlled FePt thin films grown nonexpitaxially on oxidized Si substrates without using any underlayers. After 700 °C annealing, the FePt single layer with thickness less than 10 nm shows good (001) texture and perpendicular anisotropy. The scanning electron microscope images indicate that these films are composed of isolated islands. For the films thicker than 20 nm, the films become continuous and (111) orientation appears. The transition of film texture relates to the change of morphology of the films. Finally, a theoretical mode based on minimizing surface energy is proposed to explain the texture variation in the films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-Cooper-pair problem and the Pauli exclusion principle

While the one-Cooper-pair problem is now a textbook exercise, the energy of two pairs of electrons with opposite spins and zero total momentum has not been derived yet, the exact handling of Pauli blocking between bound pairs being not that easy for N=2 already. The two-Cooper-pair problem however is quite enlightening to understand the very peculiar role played by the Pauli exclusion principle in superconductivity. Pauli blocking is known to drive the change from 1 to N pairs but no precise description of this continuous change has been given so far. Using Richardson's procedure, we here prove that Pauli blocking increases the free part of the two-pair ground-state energy but decreases the binding part when compared to two isolated pairs--the excitation gap to break a pair however increasing from one to two pairs. When extrapolated to the dense BCS regime, the decrease in the pair binding while the gap increases strongly indicates that at odd with common belief, the average pair binding energy cannot be on the order of the gap.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of a Buffer Layer on the Formation of a Thin-Film Nickel Catalyst for Carbon Nanotube Synthesis

The formation of nanoparticles of a thin-film nickel catalyst applied on a buffer layer in the form of pure titanium, titanium oxide, or titanium nitride has been studied. It has been shown that if nanotubes are synthesized in three stages (oxidation, reduction, and growth of nanotubes), the situation may arise when the metallic catalyst becomes isolated from the surface, and hence, from the hydrocarbon flux, as a result of which the nanotube growth stops. Isolation takes place when the interface between titanium oxide and the gas phase in the reactor moves. In this case, titanium oxide goes round a nickel oxide nanoparticle and insulates it. The displacement rate of this interface and the coefficient of hydrogen diffusion in titanium dioxide have been determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SIW21-95: Hybridizing Synchronous Condensers with Grid-Forming Battery Energy Storage Systems

One of the main challenges associated with deployment of high shares of inverter-based resources (IBRs) in power grid is not only reduced system inertia but also degrading system strength that may cause severe stability impacts. A minimum level of system strength is needed for the power system to remain stable under normal conditions and to return to a steady state condition following a system disturbance. Significant system strength reduction is expected in almost all planned areas for solar and wind generation deployment. Synchronous condensers (SC) have been considered as one main technology to address the system strength issues for the areas with high levels of IBRs. SCs can help improving reliability and resiliency of power system but they do not provide the full range of services needed by power systems for reliable and economic integration of high shares of inverter-coupled variable generation such as PV generation. Services related to active power controls cannot be provided by SCs due to lack of prime mover. Even for provision of reactive power SCs have certain constraints based on their thermal and stability limits. NREL has been conducting research on a hybridized concept that combines SCs with grid forming (GFM) battery energy storage systems (BESS). This super flexible AC transmission system (SuperFACTS) that combines these two technologies in a single plant under the same controller offers a unique scalable set of services to the power system at all levels (transmission, sub-transmission, distribution, islands and isolated microgrids). Depending on use cases, SuperFACTS can be controlled to provide fully dispatchable and flexible operation using energy storage component, provide a full range of existing and future ancillary and reliability services to the grid (similar or better than conventional sources), maintain adequate levels of grid strength and inertia, and provide fault current for proper operation of protection systems. Therefore, this economic and easy to commercialize solution has potential for significant impacts on certain segments of global energy sector. All types of gird services (market based, reliability and resiliency) can be provided by SuperFACTS plants. GFM BESS can act as a self-black start source for each SuperFACTS module, which in turn can act a black start resource for co-located PV and wind power plants, segments of transmission and distribution networks, for conventional power plants, etc. The issue of in-rush currents during black start is addressed by overcurrent capability of SCs. In this paper we describe the results of modeling for SuperFACTS concept.

grid forming↗